Financial Reporting Exception - Error executing query: java.lang.Arithmetic
Hi all,
I'm using the Financial Reporting Studio 11.1.2.507 to develop a report to a planning application, so i'm using a planning connection to do it. This report involves some calcs and i have sure that is possible generate a divide by zero. But what happen is: I started developing this report using the user admin and no error message was shown. Then when i tryed to acess this report with a user other than the admin user the error occurs: "Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException".
So, have you seen this scenario before?
Could you help me with this issue?
p.s: if i wasn't clear enough, please tell me!
Warm regards,
Rafael Melo - Brasil
Mehmet,
Thanks a lot for your quick response. The error message appears when i acess through the workspace. When I was developing I was acessing with admin user (FR Studio) and now I'm using other user to test the report in the workspace. I've commited a mistake when i thought that the user point of view that I defined when i was developing would be applied over all users. So, when I opened the report with a user other than the admin the error ocurred because the default attributes resulted in a empty resultset or something like that.
Is there a way to define a user point of view (pov) for all user at once?
Best Regards,
Rafael Melo
Similar Messages
-
FR reports error-5200: Error executing query
I'm working on FR-11.1.1.3.0238 version. i'm facing issues with some of the reports related to planning application db while launching reports in workspace. Where as the reports are opening with out any issues in FR studio and there is no error message recorded in the studio.The error message is recorded in the workspace related log file.
I thought that there might be any pov corruption issue so i ran the ManageUserPov utility as well but there is no luck.
Let me know the cause of this error message and also the resolution for it.
Below is the error message info,
*12-12 09:29:10 ERROR jsp 5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException*
com.hyperion.reporting.util.HyperionReportException: 5200: Error executing query: java.lang.ArithmeticException: / by zerojava.lang.ArithmeticException
at com.hyperion.reporting.webviewer.WebDynamicReport.execute(Unknown Source)
jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrrunjob._jspService(__hrrunjob.java:1411)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:531)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:459)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:159)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:180)
at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrcheckforpovorprompt._jspService(__hrcheckforpovorprompt.java:1486)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3242)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks in advance
Edited by: kailash on Dec 13, 2012 5:59 PMNeeraj,
In the FR report server the settings are as you suggested except the TcpTimedWaitDelay = 60, this setting is set to 30.
The same settings are there in Essbase and Planning servers.
So i would like to know what exactly is all about the setting and the possible cause of the problem. It would be very helpful if i can get the cause.
Thanks in advance
Edited by: kailash on Dec 19, 2012 9:03 PM -
5200: Error executing query: ColumnOutOfRange
I'm getting the following error message when running a Hyperion report:
5200: Error executing query: ColumnOutOfRange
A report is running for some dimensions, but not others. What causes this error?
Running 11.1.1.3
Edited by: 919018 on 06-Mar-2012 02:30most of the 5200 errors I have seen are related to a POV issue. Do you have any dimensions that are on POV?
If yes, login to Workspace > File > Preferences > Financial Reporting > User Point of View > If it is Off, select ON, click OK. Log off and log back in. Try to run the report and see if the issue is still there.
Cheers,
Mehmet -
5200: Error executing query: in report (Workspace - Hyp Financial Report)
I tried to open a report in the workspace and this error appeared only in an environment in other open properly, the reports are the same.
Appears Only "5200: Error executing query: in report"
What can I do?The below link may be provide some insight:
5200: Error executing query: Invalid Item ID. Pls help
Also check log file for details about the error you are getting so as to get more information. -
HELP Needed with this error: Exception in thread "main" java.lang.NoClass
Folks,
I am having a problem connecting to my MSDE SQL 2000 DB on a WindowsXP pro. environment. I am learning Java and writing a small test prgm to connect the the database. The code compiles ok, but when I try to execute it i keep getting this error:
"Exception in thread "main" java.lang.NoClassDefFoundError: Test1"
I am using the Microsoft jdbc driver and my CLASSPATH is setup correctly, I've also noticed that several people have complained about this error, but have not seen any solutions....can someone help ?
Here is the one of the test programs that I am using:
import java.sql.*;
* Microsoft SQL Server JDBC test program
public class Test1 {
public Test1() throws Exception {
// Get connection
DriverManager.registerDriver(new
com.microsoft.jdbc.sqlserver.SQLServerDriver());
Connection connection = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://LAPTOP01:1433","sa","sqladmin");
if (connection != null) {
System.out.println();
System.out.println("Successfully connected");
System.out.println();
// Meta data
DatabaseMetaData meta = connection.getMetaData();
System.out.println("\nDriver Information");
System.out.println("Driver Name: "
+ meta.getDriverName());
System.out.println("Driver Version: "
+ meta.getDriverVersion());
System.out.println("\nDatabase Information ");
System.out.println("Database Name: "
+ meta.getDatabaseProductName());
System.out.println("Database Version: "+
meta.getDatabaseProductVersion());
} // Test
public static void main (String args[]) throws Exception {
Test1 test = new Test1();I want to say that there was nothing wrong
with my classpath config., I am still not sure why
that didn't work, there is what I did to resolved
this issue.You can say that all you like but if you are getting NoClassDefFound errors, that's because the class associated with the error is not in your classpath.
(For future reference: you will find it easier to solve problems if you assume that the problem is your fault, instead of trying to blame something else. It almost always is your fault -- at least that's been my experience.)
1. I had to set my DB connection protocol to TCP/IP
(this was not the default), this was done by running
the
file "svrnetcn.exe" and then in the SQL Server Network
Utility window, enable TCP/IP and set the port to
1433.Irrelevant to the classpath problem.
2. I then copied all three of the Microsoft JDBC
driver files to the ..\jre\lib\ext dir of my jdk
installed dir.The classpath always includes all jar files in this directory. That's why doing that fixed your problem. My bet is that you didn't have the jar file containing the driver in your classpath before, you just had the directory containing that jar file.
3. Updated my OS path to located these files
and....BINGO! (that simple)Unnecessary for solving classpath problems.
4. Took a crash course on JDBC & basic Java and now I
have created my database, all tables, scripts,
stored procedures and can read/write and do all kinds
of neat stuff.All's well that ends well. After a few months you'll wonder what all the fuss was about. -
Error executing Query - Workspace report error.
Hi All,
One of our user is getting "5200:Error executing Query" message while running the report in Hyperion Financial reporting workspace,how ever if I run this report with my login on his system I am able to run it.
Could you please put some flash on it what may be the reason behind the same.
waiting for your reply.....
Thanks,Hi, in general the 5200 error means that the user cannot connect to run the report.
What this means is that the user either doesn't have:
- the necessary Workspace permissions, or
- the necessary data source permissions to run the report. This can either be correct essbase permissions or perhaps the report uses a member they do not have access to see.
I think from memory there should be a Details button on the error message which the user sees which should provide more detailed information. Can you confirm and reply back?
Cheers, Iain -
Hi,
system i am using for Oracle SOA is :
Windows 64 Bit
i5 Processor
6 GB RAM
29 GB on C Drive is already free after installation of all SOA related products.
I have installed wlserver_10.3 for SOA 11g Development purpose and followed exact installation sequence and procedure as mention in oracle documentation
i created domain also and every thing look correct but after installation procedure there are "Additional actions required just after every thing installed" :
setting memory limit
starting weblogic server (Admin Server)
starting weblogic managed server
and so on
now Problem is when i execute C:\Oracle\Middleware\user_projects\domains\soa_div_domain\bin startWebLogic.cmd
as mention in oracle documentation i am getting following error message : (i have only included last error lines instead of complete console log)
oConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\
sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe180\profiles\default\syse
xt_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_ma
nifest_classpath;C:\Oracle\MIDDLE~1\patch_adfr1111\profiles\default\sysext_manif
est_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
Exception in thread "main" java.lang.NoClassDefFoundError: vXmx512m
Caused by: java.lang.ClassNotFoundException: vXmx512m
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: ++Xmx512m. Program will exit.
Now to resolve this what i already tried are :
I change JAVA_HOME and PATH to jdk6 which came with web logic installer
Location is at :
JAVA_HOME : C:\Oracle\Middleware\jdk160_29
PATH : C:\Oracle\Middleware\jdk160_29\bin
The above dose not include any space between path
I ran the startWebLogic.cmd and got same error
After that I also added
CLASSPATH : C:\Oracle\Middleware\jdk160_29\lib\tool.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\jdk160_29\bin
WL_HOME: C:\Oracle\Middleware\wlserver_10.3
I ran the startWebLogic.cmd and got same error
I also used earlier path which I used with eclipse when I was working on other java development.
JAVA_HOME : C:\Program Files\Java\jdk1.7.0_21
PATH : C:\Program Files\Java\jdk1.7.0_21\bin
I ran the startWebLogic.cmd and got same error
Then I also gave PATH: C:\Oracle\Middleware\wlserver_10.3\server\lib (including the existing one using ; )
I ran the startWebLogic.cmd and got same error
Now may be there is a file called setSOADomainEnv.cmd in
< C:\Oracle\Middleware\user_projects\domains\soa_div_domain\bin\ setSOADomainEnv.cmd>
That include some values for memory set :
set JAVA_OPTIONS=%JAVA_OPTIONS%
set DEFAULT_MEM_ARGS=-Xms512m –Xmx512m
set PORT_MEM_ARGS=-Xms512m –Xmx768m
if "%JAVA_VENDOR%" == "Oracle" goto OracleJVM
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m -XX:MaxPermSize=768m
set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=256m -XX:MaxPermSize=768m
now as I change the red highlighted value to 512 value because I have less memory resource and I checked in installation documentation to change the above red highlighted value to 512 original is 1024 which is too high and it was crating problem and showing memory space problem so I change it to 512 and now I am not getting that memory space problem error but may be the above error is related with change value in setSOADomainEnv.cmd file or not
Following are my domain, weblogic and soa home directory path and all these path are exactly what it suppose to be according to Oracle Installation Documentation:
WebLogic :
C:\Oracle\Middleware\wlserver_10.3
C:\Oracle\Middleware\coherence_3.7
C:\Oracle\Middleware\oepe_11.1.1.8.0
SOA Oracle Home Directory :
C:\Oracle\Middleware\Oracle_SOA1
OSB Home Location :
C:\Oracle\Middleware\Oracle_OSB1
Domain name : soa_div_domain
Domain Location : C:\Oracle\Middleware\user_projects\domains
Application Location : C:\Oracle\Middleware\user_projects\applications
Domain Location: C:\Oracle\Middleware\user_projects\domains\soa_div_domain
form here i am trying to start weblogic : C:\Oracle\Middleware\user_projects\domains\soa_div_domain\bin\startWebLogic.cmd
Please tell me any body want more details.
Thanks.I think you are missing a character '-'
USER_MEM_ARGS="Xms512m -Xmx512m -XX:MaxPermSize=128m"Add this character like follows
"-Xms512m -Xmx512m -XX:MaxPermSize=128m" -
I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
at adobe.abc.Domain.resolveTypeName(Domain.java:231)
at adobe.abc.Domain.resolveTypeName(Domain.java:148)
at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error. -
Error complie "Exception in thread "main" java.lang.NoClassDefFoundError"
Dear All,
I have the following problem can not compile the code below.
Here my settings and the code.
Thanks for the help.
My java version.
===============================================
D:\bea\jdk150_22\bin>java -version
java version "1.5.0_22"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_22-b03)
Java HotSpot(TM) Client VM (build 1.5.0_22-b03, mixed mode)
===============================================
I use a bat to compile the code
===============================================
set JDK_HOME=D:\bea\jdk150_22
set PATH=%JDK_HOME%\bin;%PATH%
set CLASSPATH=%CLASSPATH%;D:\oracle\product\10.2.0\client_1\jdbc\lib\classes12.jar
rem ---- compile
javac GetDBOracle.java
rem ---- testing
java GetDBOracle
rem ---- add to jar
jar cf GetDBOracle.jar GetDBOracle.class
===============================================
My java code
===============================================
import java.sql.*;
import java.io.*;
public class GetDBOracle {
public static String GetDBOracle(String Parm1, String Parm2) throws SQLException
String myResult = "";
// Load Oracle driver
DriverManager.registerDriver (new oracle.jdbc.OracleDriver());
// Connect to the local database
Connection conn = DriverManager.getConnection
("jdbc:oracle:thin:@localhost:ORCL", "ORC", "ORC2010");
// Query the employee names
Statement stmt = conn.createStatement ();
ResultSet rset = stmt.executeQuery ("SELECT JAVA_GET_VALUE('"Parm1"','"Parm2"') FROM DUAL");
// Print the name out
while (rset.next ()) {
myResult = rset.getString (1);
//close the result set, statement, and the connection
rset.close();
stmt.close();
conn.close();
return myResult;
public static void main(String args[])
try {
System.out.println(GetDBOracle("XXI", "12000"));
} catch (Exception e) {
System.out.println(e.getMessage());
===============================================
Erro
===============================================
Exception in thread "main" java.lang.NoClassDefFoundError: GetDBOracle
===============================================What happened to this Error complie "Exception in thread "main" java.lang.NoClassDefFoundError" ?
-
When compiling one of my projects, I am getting this error suddenly:
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 14
at adobe.abc.GlobalOptimizer$InputAbc.readCode(GlobalOptimizer.java:1510)
at adobe.abc.GlobalOptimizer$InputAbc.readBody(GlobalOptimizer.java:682)
at adobe.abc.GlobalOptimizer$InputAbc.readBodies(GlobalOptimizer.java:403)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:326)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
but only when targeting iOS. fo Android only, it works fine. Anyone have any ideas? I also logged it as a bug.I get the I/O exception while reading: D:\Java\HelloApplet (The system cannot find the file specified). I have previously compiled HelloApplet.java into HelloApplet.class using javac.exe
the two include statements in the sample HelloApplet I'm using are
import java.applet.*;
import java.awt.*;
I also have a ComponentEventTest.java file which I've made into a class with these two
include statements:
import java.awt.*;
import java.awt.event.*;
I can however compile .java files which have no include statements.
I take it that my classpath is not set correctly. Like I said earlier, I'm using winxp
and trying to set the classpath variable under system. I have tried under user too. The path names I've tried setting are C:\Program Files\Java\jdk1.5.0_02\, C:\Program Files\Java\jdk1.5.0_02\lib, C:\Program Files\Java\jdk1.5.0_02\include, and C:\Program Files\Java\jdk1.5.0_02\;C:\Program Files\Java\jdk1.5.0_02\lib;C:\Program Files\Java\jdk1.5.0_02\include.
How can I correct this? If it's possible, I would like to set a variable in windows
versus having to type extra commands at the command prompt everytime I try
to run a java class with java.exe. Any help would be much appreciated -
Error:"exception in thread main:java.lang.noclassdeffound error.
Hi,
I am new to this java tech and programming. I just started learning and installed j2sdk1.4.0_03. I wrote a small hello world program and compiled it without any errors. When I execute the same using java hello command, I am getting an error like this: exception in thread "main" java.lang.noclassdeffound error. I am not able to resolve this issue. Please let me know the sol.
thanks
venkatramansend the program u have typedUmm... Why?
Anyway @NovaKane: Welcome. Together with seifist and sunny we have at
least three new posters who show enough intelligence to find chuck's
solution (or one of the many hundreds of others like it) and the politeness
to thank him for it. What's the forum coming to?
If you need it there is a description of the classpath here:
http://java.sun.com/j2se/1.5.0/docs/tooldocs/windows/classpath.html
Again, welcome. And thanks for raising the intelligence level (and politeness
quotient) of the fora. -
Exception in thread "main" java.lang.Error
Hiya all,
i`ve got a problem with my compiler , it wont execute a for lus.
so can anybody help me to solve my problem..
this is the error that my compiler gives:
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
Syntax error, 'for each' statements are only available if source level is 5.0
at ForEachInzend2.<init>(ForEachInzend2.java:8)
at ForEachInzend2.main(ForEachInzend2.java:16)
public class ForEachInzend2 {
public ForEachInzend2(){
int[] celblock = new int[100];
int crimineel = 100;
for (int cel : celblock){ //this is red underlined.
cel = crimineel;
crimineel++;
System.out.println("Criminelen in celblock " + cel);
public static void main(String[] args){
ForEachInzend2 foreachinzend2 = new ForEachInzend2();
}John_Musbach wrote:
Exception in thread "main" java.lang.Error: Unresolved compilation problem: Unresolved compilation problem is an error that you'll only ever see if you're using an IDE. If you used the javac compiler, then you would have seen that the code doesn't even compile.
The reason (as others have pointed out) is, that some paths through your method don't return a value.
I'll re-write your code in the code-style that I usually use, because then it might be easier for you to see the problem:
public boolean find(MusbachJ_Person person,BstNode node)
if(node.intData.compareTo(person)==0) {
return true;
if( node.leftNode != null ) {
find(person,node.leftNode );
if( node.rightNode != null ) {
find( person, node.rightNode);
else {
return false;
}There are two prolbems. I'll spell out the first and let the other one for you to find:
1.) you don't do anything with the return-values of the find-methods you are calling. What do you want to do with them?
2.) What do you return if the current node is not the one that you want and you've got a right node? -
Error of compilation for an IOS project:
Exception in thread "main" java.lang.OutOfMemoryError: GC overhead limit exceeded
at adobe.abc.Algorithms$SetMap.get(Algorithms.java:226)
at adobe.abc.Algorithms$ExprWorkQueue.add(Algorithms.java:491)
at adobe.abc.Algorithms$ExprWorkQueue.addAll(Algorithms.java:524)
at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:6007)
at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4733)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3615)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2309)
at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:534)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:343)
at com.adobe.air.ipa.GOAOTCompiler.convertAbcToLlvmBitcodeImpl(GOAOTCompiler.java:243)
at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:85)
Compilation failed while executing : ADT
We allocate 4GB of memory for the compilator and the results is the same. The build is very long (~5 min)See if this helps
OutOfMemoryError: GC overhead limit exceeded when heap is just fine
regards
Pravin -
Hi all,
i try to use pfi with a project that i did with air in flash builder.
I make my swf with ant task
<target name="releasecompile" depends="init">
<echo>
Ant Task :: releaseCompile
</echo>
<java jar="${MXMLC.JAR}" fork="true" failonerror="true">
<arg value="-debug=false"/>
<arg value="+flexlib=${SDK_HOME}frameworks"/>
<arg value="+configname=air"/>
<arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
<arg value="-output=${build}/${APP_ROOT_FILE}"/>
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
</java>
</target>
i have a swf in result and i play pfi like this
./pfi -package -target ipa-ad-hoc -provisioning-profile /Users/stef/Desktop/PROJECT/PROJECT_Config-2.mobileprovision -storetype pkcs12 -keystore /Users/stef/Desktop/PROJECT/Certificats2.p12 -storepass mypass /Users/stef/Desktop/PROJECT/PROJECTConfig.ipa /Users/stef/Documents/Adobe\ Flash\ Builder\ 4/PROJECT/src/PROJECTConfigurateur-app.xml -C /Users/stef/Desktop/PROJECT/ PROJECTConfigurateur.swf Default.png icons/Icon57.png icons/Icon29.png icons/Icon512.png
Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.patterns.facade::Facade
at adobe.abc.Domain.resolveTypeName(Domain.java:195)
at adobe.abc.Domain.resolveTypeName(Domain.java:112)
at adobe.abc.GlobalOptimizer$InputAbc.resolveTypeName(GlobalOptimizer.java:274)
at adobe.abc.GlobalOptimizer$InputAbc.readInstance(GlobalOptimizer.java:837)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:388)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:280)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:160)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcode(AOTCompiler.java:329)
at com.adobe.air.ipa.AOTCompiler.GenerateMacBinary(AOTCompiler.java:600)
at com.adobe.air.ipa.IPAOutputStream.compileRootSwf(IPAOutputStream.java:196)
at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:366)
at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:65)
at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:165)
at com.adobe.air.ADTEntrypoint.parseArgsAndGo(ADTEntrypoint.java:132)
at com.adobe.air.ipa.PFI.parseArgsAndGo(PFI.java:152)
at com.adobe.air.ADTEntrypoint.run(ADTEntrypoint.java:68)
at com.adobe.air.ipa.PFI.main(PFI.java:112)
do you have some ideas about this ?
Regards
StefOk,
<target name="releasecompile" depends="init">
<echo>
Ant Task :: releaseCompile
</echo>
<java jar="${MXMLC.JAR}" fork="true" failonerror="true">
<arg value="-debug=false"/>
<arg value="+flexlib=${SDK_HOME}frameworks"/>
<arg value="+configname=air"/>
<arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
<arg value="-output=${build}/${APP_ROOT_FILE}"/>
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
</java>
</target>
I mistake this line
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
must be
<arg value="-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
for include the content in the swf.
Regards
Stef -
Exception in thread "main" java.lang.NullPointerException error JDeveloper 12c
Hello,
I am trying to call a java stored procedure in java application. I am using ORACLE database and JDeveloper.
I am getting error "Exception in thread "main" java.lang.NullPointerException. I have no idea what have I been doing wrong.
I have a table "Beer" and I want to select all the data out with a stored procedure which I call out of Java app.
I have a java.class file Store_A.java which I have loaded into the ORACLE database with LOADJAVA :
import java.sql.*;
import java.io.*;
public class Store_a {
public static void apskatit ()
throws SQLException
{ String sql =
"SELECT * FROM Beer";
try { Connection conn = DriverManager.getConnection("jdbc:default:connection:");
PreparedStatement pstmt = conn.prepareStatement(sql);
ResultSet rset = pstmt.executeQuery();
rset.close();
pstmt.close();
catch (SQLException e) {System.err.println(e.getMessage());
Then I have created a procedure which I plan to call out in java:
CREATE OR REPLACE PACKAGE Store_a AS
PROCEDURE apskatit;
END Store_a;
CREATE OR REPLACE PACKAGE BODY Store_a AS
PROCEDURE apskatit AS LANGUAGE JAVA
NAME 'Store_a.apskatit()';
END Store_a;
And I have a java file that I have created with JDeveloper 12c:
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
public class Class1 {
* @param args
public static void main(String[] args) throws SQLException {
Connection conn = null;
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
//Izveidojam savienojumu
conn = DriverManager.getConnection("jdbc.oracle.thin:@localhost:1521", "SYSTEM", "asdasd");
// Izveidojam callable statement
CallableStatement stmt = conn.prepareCall("CALL Store_a.apskatit()");
ResultSet resul = stmt.executeQuery();
while (resul.next()) {
System.out.println(resul.getInt(1) + "\t" + resul.getString(2));
} catch (ClassNotFoundException e) {
e.printStackTrace();
} finally {
try {
conn.close();
} catch (SQLException e) {
e.printStackTrace();
When I try to run the java file, I get this error "Exception in thread "main" java.lang.NullPointerException at client.Class1.main(Class1.java:29).
So the line I get error in is "conn.close();"
How to fix this?
Thank you very much in advance.I am trying to call a java stored procedure in java application. I am using ORACLE database and JDeveloper.
I am getting error "Exception in thread "main" java.lang.NullPointerException. I have no idea what have I been doing wrong.
Maybe you haven't read it yet but I told you in your other thread what you were doing wrong and, step by step, how to address the problem.
https://forums.oracle.com/thread/2611124
I'm not going to repeat everything again just this one main piece of advice:
Until you get you code working outside the database don't even bother trying to load it into the DB and create a Java stored procedure.
You are trying to deal with too many different issues at the same time. Unless you solve your primary Java problem by fixing the code outside the DB you will have nothing but problems loading it into the DB.
And just get rid of this line of code - you don't need it anymore and it hasn't been done like that for many years now:
Class.forName("oracle.jdbc.driver.OracleDriver");
Maybe you are looking for
-
Neowiz duel poker won't open on iPhone 5. I used it on iPhone 4 s. any solutions?
-
IPhoto Library Upgrader is not working for me.
I am running a Mac Mini 2.5 GHz Core i5. (This is the base model of the current Mac mini as of August 2013.) Running 10.8.4. I am trying to get iPhoto to run with an old photo library from iPhoto 4. (Yes, really. It's a long story.) I was happy
-
Australia, Telstra phone lines: How to fix clicks/noise from phone line?
This is probably the wrong forum to post my question, but I hope that some Australian HP users might have a solution to my problem, which is: My HP7410 emits noise - scratches, clicks, & so on, which I assume is phone line noise - which can be very l
-
"connection refused" in Safari
Recently uninstalled Safari "Ad-block" extension. Now I am getting "connection refused" errors when trying to access some web pages. Can someone help!
-
Hi all, I need your suggestions. Have a need to build a report based on multiple queries and some updates. ( the updates are temporary, it will not update the source ). I would like to put data into a temporary table that is good for the log on sessi