Financial Reporting is compatible with Windows 7?

Hello everyone,
I am working with Hyperion Planning v.11.1.2 and Financial Reporting v.11.1.2.674 and I need to know if Financial Reporting is compatible with Windows 7, and where I can locate more information you may need about the technical requirements of Financial Reporting.
Regards

Have a look at the compatibility matrix :- http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
For 11.1.2 the FR Client looks to be supported on Windows 7
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Is Hyperion Financial Reporting (version: 11.1.1.3) compatible with Windows

Hello all
Can anybody telll me if Hyperion Financial Reporting Studio, version: 11.1.1.3 is compatible with Windows 7 or not????
Thanks
Neha

Hi Neha,
Yes it is supported. Check the EPM System Basic Platform tab under supported platforms matrices: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-2-128342.xls
Make sure to check the Exceptions and Additional Information column. Let me know if you have any other questions.
Cheers,
Mehmet

Illustrator 10 compatible with Windows Vista?

I'm looking to purchase Illustrator 10 (can't afford the $600 for CS3). Is it compatible with windows vista? I've been all over the Adobe website, but there is no information pertaining to any upgrades or FAQs on the subject.

You'll be trying to run an old version of Illustrator (now at v.13) on an operating system with which it was never tested, so all bets are off.
However, users have reported success with Illustrator versions going back as far as 8. After installation, you will most likely need to do the following:
Right-click on the Illustrator EXE file, choose properites, click the compatibility tab, and then select...
* Disable Visual Themes
* Disable Desktop Composition
* Disable display scaling on high DPI machines
It's going to be difficult to purchase a legal copy of such an old version.
Caveat emptor.
Also make sure you update to 10.0.3.

Captivate is not compatible with Windows Vista RTM

I can confirm that Captivate 2 is not compatible with Windows
Vista (RTM Final MSDN). I have been testing it on several systems
with various versions of Vista. It had partial success with RC2,
but with RTM it crashes quite frequently (when vista is drawing new
windows). I can't tell however if captivate is directly responsible
or if it is perhaps an incompatible version of Flash (current using
latest version 9 beta) that is to blame. However, since Vista is at
RTM then I would say that it is now the responsibility of Adobe to
fix the compatibility issues with a new update. Technically vista
is not due to domestic market until january 07, however businesses
will be able to purchase vista in only two weeks, and as Captivate
is generally used for business/training use i would certainly think
that it should be of high importance that these issues are
resolved.
Can anyone else comment on their experiences with Captivate
and Vista?

Hi cptv8
I appreciate your taking the time to report back your
findings about Vista. Perhaps it will be helpful to those that are
early adopters.
You stated:
Technically vista is not due to domestic market until january
07, however businesses will be able to purchase vista in only two
weeks, and as Captivate is generally used for business/training use
i would certainly think that it should be of high importance that
these issues are resolved.
You have a valid point. However, you are making it in the
wrong venue. How? Well, Adobe doesn't normally make it a habit of
visiting the peer-to-peer support forums. This means users
supporting users. If you are concerned that Adobe is aware of this
issue, you should really consider using a different channel. The
Wish Form. And you can easily get there by simply
clicking
here.
Now I don't claim to be a guru of anything in particular, but
it seems to me that businesses are very slow to adopt things. They
tend to take a very pragmatic and slow approach. Many are just now
making the leap to XP! So I'm guessing that Vista will be slow to
gain ground. I'm also confident that the Captivate team is well
aware of the Vista issues and will be addressing them as best they
can.
Sincerely... Rick

Is Reports6i compatible with Windows Vista?

Hi guys,
Currently were using Windows XP as our OS and Oracle Reports6i for our reports. But we have encounter this problem when three of our PC's here was upgraded then used the WIndows Vista. When they started using our system then execute the report its not working anymore. What do you think the cause of this problem?..Is ORACLE Reports6i compatible with Windows Vista?
Thanks,
Lala

yes oracle reports 6i is working properly on vista try to install latest patch for oracle forms and reports 6i

Acrobat Pro 9 is not compatible with Windows 7

Acrobat Pro 9 is not compatible with Windows 7. How do I upgrade my version?
Thanks,
John

Where did you get that information (other than Win 7 is not listed in the compatibility list)? I have been using AA9 on Windows 7 for several years (it is a 32-bit system). Did you try to install it or some other issue crop up? You may need to be sure you install the updates, but otherwise it should work. Even folks with AA8 have been successful on Win 7 (at least that is what they have reported), though they are likely to have some minor problems at times.
My Win7 came with Acrobat 9 when Win 7 first came out and has worked fine. If you have upgraded OFFICE to 2010 or later, then you would only be able to print, not use PDF Maker.
That being said, it is still a good idea to go ahead and upgrade. AA9 is the oldest version qualifying for the upgrade to AAXI.

Require link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1

can any1 provide me the link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1,Plz ..

Hi Pedro,
could you fix the error?
I'm installing and I have the same problem.
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Archivos de programa/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
Thanks.
Anibal

Crystal Reports 10 Compatibility with Windows Server 2008 R2

Hello I'm a developer and I'm in the process of migrating my ASP.NET application that uses crystal reports 10 from a win2k3 server to a win2k8 R2 server.
First of all, is CR 10 compatible with windows server 2008 R2?
The application is up and running on the new server, the only thing that fails is the reports. I get the following error message:
Error in file ....c:\windows\temp\{TEMP_FILE_NAME}.rtp
Failed to create the Crystal Query Engine.
This occurs at report.load(..)
I did already grant NETWORK SERVICE access to Temp and ran the CR redistribute msi that came with Visual Studio 2008 - CRRedist2008_x64.msi.
Please help

YESSSS!!!! IT WORKS!!
Finally, after days of installing, uninstalling, setting permissions, crawling through process monitor output.. I finally have it working.
For anyone with the same problem, here's what worked for me:
I had to use the 32-bit runtime
set application pool to 32-bit
grant the following permissions based on the different errors listed below:
Error in File UNKNOWN.RPT
- Give NETWORK SERVICE list permission on C: Drive, run a report, then remove NETWORK SERVICE from the list (weird, but works, and I had to do this every single time I setup Crystal Reports on a new computer so far).
- You might also have to set correct permission on 'Temp' if u get still get this error.
Error in file ....c:\windows\temp.rtp
Failed to create the Crystal Query Engine
- Grant correct permission to C:\Program Files (x86)\Business Objects (your path may vary)
(For me it was giving Users Modify permission to Business Objects folder)
Unknown Query Engine ErrorError in File C:\Windows\TEMP\.rpt:
Unknown Query Engine Error
- Switch application pool to 32-bit.
- Make sure Crystal Reports Runtime is 32-bit (CRRedist2008_x86.msi)
Thank you guys so much for all your help and sticking through this with me.

Is Dreamweaver cs5 compatible with Windows 8

Not Dreamweaver cs5.5, but cs5. Is it fully compatible with Windows 8? It works with Windows 7.

I think it would make good sense. I hesitate to buy their products because I feel I am going to be left high and dry when the next operating system comes out. Every time my PC fails or is retired it is a guessing game as to what still works. Since software is so expensive, I find I am buying less and less – too risky. I simply do without and do not expand my IT horizons. It is a lot cheaper for the parent company to try it out and give a report than for every single user to take the plunge and potentially drown. The customers can only find out by installing the product. If it doesn’t work then there is the task of getting it off. Generally the software does not come off completely and the residue can cause complications. The companies could test until it stops working and then say that from this point back you will have to buy a new one. It sure would build consumer confidence and end a lot of aggravation.

Is my touchsmart 310-1125y pc compatible with Windows 8?

I want to install Windows 8 if possible all of my other devices run it great but don't want to risk my main desktop if it's not compatible?

One of your best options is to make an image of your hard disk and save it externally for safekeeping. You can use Macrium Reflect Free edition to do that. Macrium will create a clone copy and that will enable you to reinstall your previous operating system and partitions just as they were on the day you created the image.
Here is a video with Windows 8 preview on a TouchSmart 310 PC. Yes, your PC is compatible with Windows 8.
Use the Upgrade assistant for Windows 8. It has a inspection phase where it inspects your hardware (devices) and applications (including drivers). The inspection phase gives a report on what is and what is not compatible with Windows 8. When the report is complete and read you have a chance to cancel the upgrade. If you choose to install the operating system you are given the option of saving documents and other files or not and another chance to cancel the installation. If you choose to install the dowloading of the operating system will begin.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Is OFA Compatible with Windows 7?

My workplace currently uses Windows XP and OFA. We plan to upgrade to Windows 7 within the next 12 months.
Is Oracle Financial Analyser (Release 6.4) compatible with Windows 7?

Welcome to the forums !
Pl post details of OS, database and EBS versions. Pl see if MOS Doc 277535.1 (Recommended Set Up for Client/Server Products with Oracle E-Business Suite 11i & R12) can help - see section titled "Financial Analyzer"
HTH
Srini

Which version of oracle developer suit is compatible with windows 7 32 bit

Can somebody plz let me know which version of Oracle Developer suite is compatible with windows 7(32 bit).And plz tell me the link through which i can download this.I want to download this software for making practice of Oracle Forms and Reports by installing it at my PC.
i had downloaded ds_windows_x86_101202_disk1.zip from Oracle's site but while installing it it showing the error msg in the log as-
Using paramFile: C:\Users\USER\AppData\Local\Temp\install\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2012-08-13_03-14-21PM.log
Please press Enter to exit...
Please provide me some solution for this---

Oracle Developer Suite (ODS - Forms 10g) 10g R2 (ds_windows_x86_101202_disk1.zip) is not certified on Windows 7, however it will work. Oracle has certified Forms 11g (Fusion Middlware 11g R2) for Windows 7 (32 and 64 bit).
You can make ODS work on Windows 7, but you have to change a few things before installing to make it work.
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1Failed <<<<>
This is a fairly common bug (not just with Oracle). The Oracle installer was written to check for a specific version of Windows rather than check for a minimum version of Windows.
Fix 1: Right-click the Oracle setup.exe and select Properties and then click the Compatibility tab and select "Run this program in compatibility mode for: Windows XP SP3".
The Oracle installer also is unable to check the amount of Virtual Memory (VM) available when the VM is set to "System Managed."
Fix 2: Open the System Control panel (Start => Control Panel => System OR press Windows Key and Pause Break key). From the System Properties window, click the Advanced tab and click the Settings button under Performance. Change the Virtual Memory settings to 2048mb min and 4096mb max. Then save and restart your computer. See Microsoft - Change the size of virtual memory for more information on changing the VM. (Note; after the installation is complete, you can - and should - change the VM settings back to System Managed.)
Lastely, the Oracle installer is not designed to work with the Windows 7 User Account Control (UAC) functionality.
Fix 3: Right-click Oracle setup.exe and select "Run as Administrator".
Done, now you are ready to run the Forms 10g setup again.
As I mentioned above, Forms 11g is certified with Windows 7 and is also the only supported version available so you might want to skip Forms 10g and go straight to Forms 11g. For this you will need to download and install WebLogic Server (WLS) 10.3.5 and Fusion Middleware (FMw) 11g R2. Install WLS first, but do not run the configuration at the end of the installation. Then install FMw and run the configuration during this installation. Also, you will want to run both installers "As Administrator".
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Is Crystal RAS 9 compatible with Windows 2003 server?

We just upgraded out test RAS 9 server with Windows 2003 OS, and now the Crystal Report Application Server service won't start. We're getting a 1053 error. Is Crystal RAS 9 compatible with Windows 2003 server?

I do not believe 6X is supported in a 64 bit environment.
IF you are doing a fresh install on a different server, it should be easy to migrate your applications using the migration wizard in EAS. You can migrate applications, security everything except data. TO do that the easiest way is to export it and import into the application on the ner server.

Is LabView 5.1 compatible with Windows XP?

Is LabView 5.1 compatible with Windows XP?
I get a popup "Severe....Wrong OS", but Labview continues to try to install even after the OK for the error.
I'm trying to install 5.1 on a new computer bought for the test set.

Although I have not tried it, there are reports that some people are using it.
I think the OS requirement is a minimal requirement, so it should be okay.
However, there are also reports of people having trouble with the installation, as discussed here
Apparently, if you are successful at installing it without the error message, then it is fine, otherwise, you may not be able to install it.
See this message
Did you complete the installation? If so, did you reboot and start LV5.1?
RayR
Here is a quote from NI rep:
"Unfornutaley, we have made nothing for LabVIEW 5.1 and windows XP. You need test if during the installation do you have message with "Wrong OS", if do you haven't this message you can use it. But all computer with windows XP don't supported LabVIEW 5.1. See my link that we have customer they have try to install LabVIEW 5.1 under Windows XP."
http://forums.ni.com/ni/board/message?board.id=170&message.id=109246&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=140&message.id=6019&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=29473&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=61538&requireLogin=False
Message Edited by JoeLabView on 06-05-2008 01:11 PM

Itune is compatible with windows 8?

Is iTune compatible with Windows 8 Pro? Thanks in advance.
cmolinap

iTunes is not certified for use with Windows 8.
Some people have installed it and report that it works fine; others are reporting problems of various kinds. If you are of the early-adopter temperament, go for it.

Financial Reporting is compatible with Windows 7?

Similar Messages

Maybe you are looking for