Financial Reporting Reports....

Hi all,
I am using Hyperion 11.1.1.1 on my Win 2003 system. I created one application in Workspace. I created two types of Scenarios- Budget, Estimate. Now in Financial Reporting Studio I very well created a report. Actually, my requirement is such that I need to see information for both Budget and Estimate in a single report. I chose two scenarios in the Scenarios selection page. But what I am getting is a report only with Budget value, not for Estimate by its side. I am sure I am yet to make some setting changes. But can anyone pls tell me where? How can I really be able to see all the Scenarios in a single report at the same time??
A reply would be appreciated.
Thanks.

Hi,
If you put it in the page and view the html report it will just create a drop down so you can change the scenario from budget to estimate.
If you wanted it go across the columns then you would have to put it in the column of the grid.
Or maybe have another grid, one grid showing budget and one showing estimate.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Financial Statements report - F.01

    Hello,
    I posted this question to the abap forum, but maybe you can help me better. As you know, the account amounts from the financial statement report come from financial documents. And when you create a financial document  you specify a document type(vendor invoice, vendor payment and many others). What i need to do is modify the report to show only amounts from certain types, not all types. For doing that, i need to know if there is a connection between the financial statement and the documents types. I searched the code of the report and i did not find anything relevant.
    Maybe you met this requirement before and talked with an abaper. If that is the case, maybe you can give me a suggestion.
    Thank you very much,
    Efren

    F.01 is build with the following tables.  You may go through each table to see if they are document type specific.  I would cautio if F.01 is the right report for you/your client.
    TABLES:   t001,  ska1,  bhdgd,
              t011,  skat,
              t011t, skb1,
              t009,  skc1a,
              t004,
              t009b,
              t009y.
    TABLES:   rfsdo.
    TABLES:   tgsb.
    TABLES:   fimsg.
    TABLES:   faglfreesel.

  • Financial Analytics Reports in Local Currency

    Advise needed to help in configuring BI Apps such that the Financial Analytics reports (GL, Payables, Profitability & Receivables) show the transaction values in local currency i.e. INR instead of the default global currency USD.
    I have changed the source parameter values in the DAC Container Setup while loading the data from an EBS R12 instance. The following source parameters values have been changed to INR from USD -
    $$GLOBAL1_CURR_CODE (for the document currency)
    $$GLOBAL2_CURR_CODE (for the local currency)
    $$GLOBAL3_CURR_CODE (for the global currency)
    However, the Finacial Analytics Reports do not show any transactional values for the selected Ledger (having INR as the global currency). The data is populated in the Local Closing Amount, Local Opening Amount etc columns of the Fact - GL Balance but no data is populated in the Closing Amount (Global), Opening Amount(Global) etc columns.
    Please advise to resolve the above mentioned localization issue in Financial Analytics.
    Regards

    Are you looking for Changing the Default currency in OBIA Dashboards

  • New GL and Impact on BI Financial statement reports

    Dear All,
    I would like to know if and how the finacial statment reports  would be affected by using the new GL extractor 0FI_GL_14. New GL is being implemented on ECC,  hence the change in extractor in BI.
    Is there a standard cube that can be used for Financial statement reports(Balance Sheet comparision, BS by PC,P&L reporting by PC) for New GL.
    Currently we are getting our financial statement reports out of a Virtual cube which is based on a function module Module:RS_BCT_FIGL_DATA_GET_VC1.
    *Our current extractor for FIGL is 0FI_GL_4 .
    Appreciate your Input on this .

    Hi,
    You will find all the details here:
    http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
    -Mayuri

  • Financial Template Reports (Balance Sheet) - Auto appearance of running profit figure

    Dear Experts,
    I am working on SAP 9 Business One.
    I have prepared a Customized Balance Sheet through the Financial Report Templates for presentation purposes. But when I run the balance sheet using the Financial Template Report, the balance sheet doesn't match.
    I have found out the reason i.e. The running profit figure doesn't appear automatically.
    Someone please guide me on how to bring the profit figure automatically in the Balance Sheet, prepared through the Financial Report Templates, without running a period end closing as it shows in the balance sheet run with the 'Chart of Accounts'.
    Regards,
    Dharmik Kara

    hi Prasadbabu,
    Try it out this way. Create a new line called "Total Sales" below export sales and local sales and Subtotal" check it. In case, you cannot see the active accounts defined for export sales and local sales, then create dummy titles as parent levels and create the "Total Sales" at the same level as the export sales and local sales. In the subtotal formula, you can select the two sales accounts. After the total sales sub-total, you can go ahead with the other sales accounts.
    Bharath S

  • Can S_PLO_86000028 Financial Statement report generate Cost-center report?

    Dear Experts,
    I've tried with S_PLO_86000028  Financial Statement report and it could generate report based on Profit Center but when I tried with Cost Center, it show no record.  Can this report generate cost center wise report?
    regards,
    Abraham

    Hi Saga,
    S_PL0_86000028 is a new FI report  for Financial Statement, created by tool Report Painter with tcode FGI1 (Create Drill-down Report).
    For adding new columns, I think we can modify the form it used (0SAPBSPL-01)
    It's not a good idea to copy it to z-program 'coz I still struggle with it and doesn't work well.
    Solaris.

  • Financial Statement Report - Special items in FSE2

    Hi,
        I'm trying to rebuild the GL Balance Report using transaction FSE2, but I can't delete or create new "special items" (the red node ones). Anyone knows how to create or delete "special items" at FSE2 to custumize the Financial Statement Report?
    Thanks in advance,
    Miguel

    Hi Miguel,
    "red" items can not be deleted, as they are set per default by the system.
    Regards,
    Attila

  • Financial Statement report (Tr. F.01) by item hierarchy

    Hi,
    I have created hierarchy items in the financial statement version via tr. FSE2.
    Can I run the financial statement report for such a hierarchy item?
    Or is it only possible to select the G/L accounts of that hierarchy and create a variant for the Financial statement report?
    Thank you for your reply.
    Kind regards,
    Linda

    Hi,
    In FI, it is not possible to run the report for your hierarchy note.
    You need to run the report for the whole Financial Statement Version (FSV).
    However, you can create the same for a node in Profit Center Accounting.
    Before that you must make sure that you have copied the FSV to Profit Center Accounting.
    You can use KE5B for this purpose.
    Please let me know if you have further doubts.
    Regards,
    Ravi

  • Migrate Financial Reporting reports from version 11.1.1.2 to 11.1.2.1?

    I have recently built a brand new 11.1.2.1 environment. Our current environment is running 11.1.1.2. I have successfully migrated shared services data, and hfm data across to the new environment. I am now trying to move the financial reporting reports. Anybody know the best way to do this? Thanks.

    I did do something wrong : )
    I selected import file instead of import financial reporting documents!
    Now when I import it asks me to create a datasource which I did. It then gives me the following error:
    "Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection.<BR>Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection."
    Now I know the server/cluster is configured properly for I can open the Financial Management application through workspace and through the Financial Management client with no issues whatsoever. So they are registered properly.
    I'll continue to work at it and see if I can figure it out. In the meantime if you have a simple solution, please let me know.
    Additional info:
    I have a distributed environment. Foundation web server is where I run all the web components including Reporting & Analysis web, Financial Rptg web, shared services etc. I have a BIplus services server that is running RA Famework Server, FR Print server and HFM web server etc. I then have 3 essbase servers and one HFM server.
    Thanks,
    Mike

  • Enable drill through feature in a Financial Reporting Report

    Hi,
    my Hyperion system version is 9.3.1. I need to realize some Financial Reporting reports using the Drill Through feature but i don't know how activate this feature.
    Anybody can hel me?
    Thanks in advance.
    Stefano

    One way is related content, which drills to another report based on the intersection clicked on by the user:
    Check out the fr user guide (chapter 7) for more info:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm
    For setting up drill-through, you need to define the Hybrid Analysis relational source in Integration Services Console, check out the Hyperion Essbase – System 9 Database Administrator's Guide from the following link:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_3.htm
    Regards, Iain

  • Report of type "Financial Reporting Report"

    Hi All,
    I want to import a report of type "Financial Reporting Report" from another system (Say from SYSTEM:"A" to SYSTEM:"B") through workspace .
    Is it posibble to import a report of type "Financial Reporting Report"?
    Thanks,
    Edited by: Josephine on Aug 5, 2009 6:50 AM

    Hi,
    If you are on version 11 then you either use LCM via Shared Services
    or you can go into the workspace and export report to a file, then log into your target workspace and import the file
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Migrating Hyperion Financial Reporting reports

    Hi everybody.
    We have to migrate the Hyperion Financial Reportings reports from Dev to PROD, we tried copying the database from DEV and placing it onto PROD but that doesn't work as I believe there are several tables pointing to the DEV environment.
    Would any of you know to migrate the reports from Financial Reportings? Either moving database or a simple way just to extract and import the reports .
    Thanks

    If you are using Version 11 you could use LCM.
    The easiest way is just to log into workspace and export all the reports in one go, it creates a zip file of all the reports.
    You can then import them into your target env via workspace.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Reconcilation account in Profit Centre reporting reporting

    Hello all,
    We have defined an customer reconcilation GL account in transaction 3KEH and have defined a default profit center to it.
    Now one of the company code wants to use profit center financial statement reporting for which they will run tran F.5D and 1KEK.
    This will result in the co-code having difference in the GL and PCA report to the extent of reconcialtion account.
    Is there an alternative solution available for the same as we would like to keep the default profit center definition in 3KEH
    Thanks
    Nelson

    Hi Paul,
    We had wrong FSG assigned to asset reconciliaiton account where cost centre was supressed.
    Great help, thanks a lot. Full points assigned.
    Cheers
    Samir

  • Problems with Page Break in an Interactive Reporting report

    Hello everybody,
    Platform: Hyperion System 9.3.1.
    I have serious problems in managing the 'page break' in an Interactive Reporting report.
    The report shows sales data by store, with article and colour details and it is organized like this:
    group 1: geographic area
    group 2: country
    group 3: city
    group 4: store
    columns: article, colour
    facts: quantity, price, value
    My client's request is to perform a page break at the store group level, meaning that apart from the first store occurance, any change in the store value shoul start a new page.
    The requested result is like this:
    page1: geographic area1
    country1
    city1
    store1
    data store1...
    page 2: store2
    data store2...
    page3: store3
    data store3...
    I tried several combinations of using Break After and Break Before on the store group, with Keep Next / Keep Together and it was impossible to obtain the desired result.
    If I use Break Before the result is as follows:
    page 1: geographic area1
    country1
    city1
    page 2: store1
    data store1...
    page 3: store2
    data store2...
    If I use Break After the result is as follows:
    page 1: geographic area1
    country1
    city1
    store 1
    page 2: data store1...
    store 2
    page 3: data store2...
    even if I specify 'Keep with next' or 'Keep together' for store group and the store data table.
    Any help will be very very appreciated because I've been trying for weeks to figure out this issue.
    Daniela

    First start without using any of the Keep with Next and Keep together.
    Second. try putting the Page Break in the Group Footer. You do not need to keep it visible
    Then you may want to repeat headers on Store in case the Store's Detail rolls onto next page
    Hope this helps
    Wayne

  • Adding a Crystal Report (report or layout) in a specific menu location

    Hi,
    i want to import a CR Report through SDK.
    I found an example in the sdk help center. You can find it searching 'Adding a Crystal Report (report or layout)'.
    It works but going in the Report and layout manager i find it under 'Lost Reports'.
    i cannot find a way to specify the MENU LOCATION just like the Import Wizard allows.
    Can anyone help me?
    Thanks
    Paolo

    hi how you solve this??

  • Conditional display in a SQL-Report/Report Region

    Hi,
    here I have an example for "Conditional display in a SQL-Report/Report Region". I figured it out in Firefox 3.6.2 using Firebug as development tool on Apex 3.2.1.00.12.
    First you have to put the following javascript code in the Page HTML-Header:
    <script type="text/javascript">
    <!--
    // SOURCE
    // W:\oracle\PRJ DWLS\javascript.07.js
    // Beispiel Funktion zur bedingten Formatierung einer Tabellenzelle.
    // Help (Substitution Strings):
    // http://htmldb.oracle.com/pls/otn/wwv_flow_help.show_help?p_lang=de&p_session=2412201185523196&p_flow_id=4003&p_step_id=420,4003
    // HTML Expression:
    // <script>ex_conditional_td('R094260001010', #ROWNUM#, #COLNUM#-1);</script>#DFT_COND1#
    function ex_conditional_td
    ( p_id
    , p_rownum
    , p_cellnum
      var l_td;
      l_td = vd_getColumn(p_id, p_rownum, p_cellnum);
      // hier die Bedingung definieren
      if (true) {
        l_td.style.color = '#808080';
    }  // -- eof ex_conditional_td -- //
    // Beispiel Funktion zum Abstellen der onMouse Funktionalität der Tabellenzeile
    // HTML Expression:
    // <script>ex_conditional_tr('R094260001010', #ROWNUM#);</script>#DFT_ID#"
    function ex_conditional_tr
    ( p_id
    , p_rownum
      var l_tr;    // TABLE.TR
      var l_td;    // TABLE.TR.TD
      if (true) {
        l_tr = vd_getRow(p_id, p_rownum);
        l_tr.onmouseover = null;
        l_tr.onmouseout  = null;
        for (var i=0; i<l_tr.cells.length; i++) {
          l_td = l_tr.cells;
    l_td.style.backgroundColor = '#DDDDDD';
    } // -- eof ex_conditional_tr() -- //
    var g_DEBUG = false;
    var g_TBODY = null;
    // Liefert das Body-Element der Tabelle mit der ID <p_id>.
    // Parameter
    // p_id - die Id der HTML-Tabelle
    // Return
    // das Body-Element oder NULL, wenn die Zeile nicht gefunden wurde
    function vd_getBody
    ( p_id
    if (g_TBODY == null) {
    var l_table = null;
    l_table = document.getElementById( p_id );
    if (l_table == null) {
    l_table = document.getElementByName( p_id );
    if (l_table != null) {
    if (vd_debug()) {
    alert("Tabelle gefunden, " + l_table.nodeName);
    g_TBODY = vd_search( l_table, 'TD', 't10data', 'TBODY');
    return g_TBODY;
    } // -- eof vd_getBody() -- //
    // Liefert die Zeile <p_rownum> der HTML-Tabelle mit der Id <p_id>.
    // Parameter
    // p_id - die Id der HTML-Tabelle
    // p_rownum - die Zeilennummer
    // Return
    // die Zeile oder NULL, wenn die Zeile nicht gefunden wurde
    function vd_getRow
    ( p_id
    , p_rownum
    var l_body = vd_getBody(p_id);
    if ( l_body != null
    && l_body.nodeName == 'TBODY'
    && l_body.children[p_rownum].nodeName == 'TR') {
    return l_body.children[p_rownum];
    else {
    return null;
    } // -- eof vd_getRow() -- //
    // Liefert die Spalte <p_column> der Zeile <p_rownum> der HTML-Tabelle mit der
    // Id <p_id>.
    // Parameter
    // p_id - die Id der HTML-Tabelle
    // p_rownum - die Zeilennummer
    // p_column - der Index der Spalte / Zelle
    // Return
    // die Zelle oder NULL, wenn die Zelle nicht gefunden wurde
    function vd_getColumn
    ( p_id
    , p_rownum
    , p_column
    var l_tr = vd_getRow(p_id, p_rownum);
    if ( l_tr != null
    && l_tr.nodeName == 'TR'
    && l_tr.children.length >= p_column
    && l_tr.children[p_column].nodeName == 'TD') {
    return l_tr.children[p_column];
    else {
    return null;
    } // -- eof vd_getColumn() -- //
    // Rekursives Suchen nach einem Node.
    // Zweck: Das bedingte Formatieren einer Tabellenzelle in einem Apex Standard
    // SQL-Report.
    // Diese Funktion durchsucht rekursiv, ab einem Ausgangsknoten <p_node>, alle
    // darunter befindlichen Elemente, ob in dem Element <p_seachIn> sich die
    // Klasse <p_class> befindet.
    // Bei Standard-Reports ist die Reportzelle (TD) mit der Klasse
    // "t10data" formatiert.
    // Zunächst muss dazu die Tabellenzelle (TD) selbst, die übergeordnete
    // Tabellenzeile (TR), der Tabellenbody (TBODY) oder die Tabelle (TABLE)
    // selbst ermittelt werden.
    // Der Beispielaufruf:
    // var l_body;
    // var l_node = document.getElementById( 'R112233' );
    // l_body = search( l_node, 'TD', 't10data', 'TBODY');
    // durchsucht also das mit der Id "R112233" versehene Element [der Report, für
    // den in Apex eine statischen ID vergeben werden musste] rekursiv, bis er
    // die [erste] Tabellenzelle "TD" findet, die als Klasse "t10data"
    // definiert hat. Für diese ermittelt er dann das übergeordnete TBODY-Element.
    // Parameter
    // p_node - das Ausgangselement
    // p_searchIn - der Knotenname, der durchsucht werden soll
    // [node.nodeName == p_searchIn]
    // p_class - der Name der CSS Klasse
    // [node.classList[<index>] == p_class
    // p_parentName - der Name [node.parentNode.nodeName == p_parentName]
    // des Elements, das zurückgeliefert werden soll. Wird als
    // p_parentName der Suchname p_searchIn angegeben, wird
    // das Element selbst zurückgegeben.
    // Return
    // das per p_parentName gesuchte Element (TD, TR, TBODY, TABLE)
    function vd_search
    ( p_node
    , p_searchIn
    , p_class
    , p_parentName
    var LN = "vd_search";
    var l_element = null;
    // DEBUG
    if (vd_debug()) {
    alert(LN + ":" + "Untersuche " + p_node.nodeName + ", id=" + p_node.id);
    // 1) der aktuelle Knoten ist der, der durchsucht werden soll
    if (p_node.nodeName == p_searchIn) {
    if (p_node.classList.length > 0) {
    for(var c=0; c<p_node.classList.length; c++) {
    if (p_node.classList[c] == p_class) {
    // Parent Node dynmisch suchen
    l_node = p_node;
    if (l_node.nodeName == p_parentName) {
    return l_node;
    while(l_node != null && l_node.parentNode != null) {
    if (l_node.parentNode.nodeName == p_parentName) {
    return l_node.parentNode;
    else {
    l_node = l_node.parentNode;
    // 2) wenn nicht 1) oder nicht in 1) gefunden, dann in den Kindelementen
    // weitersuchen
    if (p_node.children.length > 0) {
    var i = 0;
    while (i<p_node.children.length && l_element==null) {
    l_element = vd_search( p_node.children[i], p_searchIn, p_class, p_parentName);
    i++;
    return l_element;
    } // -- eof vd_search() -- //
    // Gibt an, ob Debug ein- (true) oder ausgeschaltet (false) ist.
    // Return
    // true - debug ist eingeschaltet
    // false - debug ist ausgeschaltet
    function vd_debug()
    return g_DEBUG;
    -->
    </script>
    Maybe you have to modify the "vd_getBody" function. I'm searching the table cell with having the class "t10data". When you use another theme, there's maybe another class used.
    Second is, that you set an static id for your report region. I prefer this structure:
    R<app-id><page-id><seq> (Raaaaappppsss) e.g. R094260001010.
    First example is to turn off the onMouse-Effect. Maybe on the first or last column definition you put this code in the "HTML-Expression" area:
    <script>ex_conditional_tr('R094260001010', #ROWNUM#);</script>#ID#This will call the example function ex_conditional_tr with the parameter
    a) the region id
    b) the rownum (as oracle always starts with 1 this is the first data row [rownum=0 is the table header row])
    Second example is the conditional formatting of a table cell. Put this in the HML-Expression area:
    <script>ex_conditional_td('R094260001010', #ROWNUM#, #COLNUM#-1);</script>#ENAME#This will call the example function ex_conditional_tr with the parameter
    a) the region id
    b) the rownum
    c) the cellnum (here we have to subtract 1 to get the "real" cell index)
    The "ex_conditional" functions are just a representation of how to get the row or cell node.
    Hope this help a bit.
    Tom

    I would use a CASE statement in the select....
    each CASE would be an img src tag for a different button if the button is an image.
    does that make sense? I can include an example if you would like...

Maybe you are looking for

  • 30 GB video sad face/"freezing" it's getting annoying ~HELP~!

    Hi all, I've been having this problem for about 2 weeks now. My iPod, which decided to kindly go corrupt the day after the warranty ran out, has been greeting me with the dreaded sad face. It only appears whenever it hasn't been turned on for a while

  • Need help in GL table column mapping - R12.1.3

    Hi, we are upgrading from 11.5.10 to R12.1.3 While modifying one of the reports, come across a query which uses gl_mc_reporting options table. This table is replaced by gl_ledger_relationships in R12. However, in the query, we are using reporting_set

  • IPhoto says print too large on cover

    on the cover of my picture book on iPhoto it keeps giving me the red triangle exclamation point even when there is no print in the box. I am trying to print the cover title in Nahum brush script in 24 or smaller even and it won't let me. I deleted al

  • How can I get the content for PREM eL 11?

    Win 8 64bit, when I try to get a DVD theme, it will start downloading for a long time. The end.

  • Warehouse management Cycle counting

    Hi All , I am trying to create an inventory record for cycle counting  in transaction LICC. But it is not allowing me to do so and giving error as "Maintain number range interval "01" for inventory" . Can anybody tel me the SPRO path OR tcode where i