Financial reporting studio client 11113

hi,all
where can I download financial reporting studio client of version 11.1.1.3?
thanks a lot!

In 11.1.1.3 the FR studio is installed by running the installer(installtool.cmd/installtool.sh) and selecting the FR client .Before that you need to have the files downloaded for 11.1.1.3 :
Oracle Hyperion Enterprise Performance Management System Installer
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 1 of 4
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 2 of 4
Oracle Hyperion Financial Reporting, Fusion Edition Release 11.1.1.3.0
Oracle Hyperion Financial Management, Fusion Edition Release 11.1.1.3.0
These are the required files.Currently you will not get these in the Oracle E-delivery. You need to raise a non-technical Service Request for the files with Oracle for these.
Hope this helps.

Similar Messages

  • Financial Reporting Studio Client Installation Error

    Hi,
    today i tried to install Financial Reporting Studio on my own computer to access the data stored on a server landscape. After successfull installation, when I try to login I receive the following error message: You are not Authorized to use this Functionality. Please contact Administrator
    Nevertheless, I am the admin so I need to contact myself. I tried a lot of things today and read a lot of threads, still no solution. I can run the Reporting Studio from any of my servers and use the URL http://webserver:19000 It works when run from any of the servers. But when I try it from the "outside" I always get the error above. I can access all other Hyperion Components from my computer, hence the environment is configured right to that extend.
    Do you have any suggestions on this error?
    Thank you very much,
    Best Regards
    Philipp
    I run: Windows Vista
    FinRep Studio: 11.1.0.2507

    I have the same issue with 11.1.1.3 and Windows 7 which we recently installed..  Initially, Financial Reporting would not launch but after we did the steps mentioned below, we the studio opens and we can access our Repository.  However, we get a 'Failed to connect to Server...' for each of our HFM and Essbase reports.  Any ideas?
    Thx,
    Mike
    We followed the below steps
    manually copy the following folders and files from a working 32-bit Windows machine:
    <HYPERION>\common\JRE  (This is needed for Studio startup.)
    <HYPERION>\common\ADM\9.5.0.0\Essbase  (This is needed for data source connections.)
    <HYPERION>\products\biplus\lib\fr_client.properties  (This defines the FR Client Logging settings.)
    <HYPERION>\products\biplus\lib\fr_global.properties  (This is needed to define the default
    RMI port (FR Studio will try to use 1099 otherwise) and the location of the fr_client.properties file (or else the FRClient.log file doesn't get created).)
    Note that if the Java Runtime (<HYPERION>\common\JRE ) was missing after initial installation, it will be necessary to manually execute <HYPERION>\products\biplus\install\bin\HrRunAnt.cmd.  This is a Windows batch file used to perform post-install configuration steps; it depends on the presence of the java Runtime.

  • Ports required to be opened for Financial Reporting Studio Client access

    Hi Everyone,
    What are the exact ports which are required to be opened between the client machines and the Report Server so that users are able to use the Reporting Studio. (I guess opening port 8200 only will not suffice, will it?)
    Thanks,
    Sayantan

    Sayantan,
    Chapter 15 of the Financial Studio Report documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/fr_user.pdf) specifically pages 300 to 311 explain the default setup ports, the amount of Essbase ports required and such.
    JTS

  • Hyperion Financial Reports Studio Client Question

    Hi,
    I have a colleague that is on 11.1.1.3.0.0238 Financial Reports Client. He can connect to the server just fine. However when I try, I get the ole 'You are not authorized to use this functionality. Contact your Admiinistrator'. However when I use my login/pw on his machine I connect just fine.
    So I need to make sure my client is same version. Is there a file I can copy from his install directory to mine that will make them the same? I can't get the patches as I have no Support Identifier. Usually it's just replacing a few files?
    Thanks

    11.1.1.3.0.0238 should be the unpatched version of Financial Reporting, if you log into workspacew and go to help > about > details you will see the version of financial reporting.
    The server and client usually have to be the same version for it to work so unless you have patched your client you are probably on the same version, if you have patched it then you should be able to tell from Opatch
    If you are not sure then it may be easier just to uninstall FR Studio and install the base version.
    You could also open up or extract HReports.jar which is in the <HYPERION_HOME>\products\biplus\lib folder, go into the META-INF folder, view MANIFEST.MF and look for Implementation-Version:
    There are lots of articles in Oracle Support around the error message you are getting, if you have no support identifier I am sure you will know somebody in your company that should have access.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Financial Reporting Studio client doesn't start in Windows 7 64-bit

    I have installed version (11.1.2.756) on my Windows 7 64 bit machine. When I try to start the application it will not start. I am getting the following message. Runtime Error 429 ActiveX component can not create object.
    Thanks

    Is the windows user/id is having sufficient administrative rights? Have you tried with Administrator id for windows login & then tried to open FR Studio?
    If that does not help, try reinstalling FR Studio.
    Regards,
    Santy

  • Hyperion financial reporting studio not responding

    hi all,
    I have Hyperion financial reporting studio "client" (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
    The machine configuration is:
    P4 3.0 GHz and 1 GB RAM.
    When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
    CPU usage:fluctuates between 45 - 100% which was initially 1%
    PF usage:jumps to 1.32GB which was initially 362MB
    Physical memory available : drops down from 762188(K) to 1728(K)
    application status: Not responding
    AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .There is no error log created ??
    I cannot proceed further. Please help me out...
    Thanks in advance

    Please post these type of queries to Hyperion BI Workspace & Reporting module

  • Hyperion Financial Reporting Studio "Failed to Connect to Server"

    One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
    We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
    We've searched help documentation and other threads in this forum but haven't been able to find what we need.
    We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
    Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
    Thanks.

    We had the same issue after installing the Financial Reporting Studio client.
    If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem.

  • Financial reporting studio not responding

    hi all,
    I have Hyperion financial reporting studio client (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
    The machine configuration is:
    P4 3.0 GHz and 1 GB RAM.
    When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
    CPU usage: jumps to 100% which was initially 1%
    PF usage:jumps to 1.32GB which was initially 362MB
    Physical memory available : drops down from 762188(K) to 1728(K)
    Application status : Not responding.
    AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .
    THIS PROCESS TAKES ALMOST 1 MIN.
    I cannot proceed further. Please help me out...
    Thanks in advance

    Hi,
    Upgrade the RAM to 2GB, as FR studio consumes more than .75 GB
    Regards
    Veeru

  • Financial Reporting Studio 11.1.2.1 admin documentation?

    I'm very troubled with the way how Oracle sets up its website and naming. Sorry for venting a bit
    But it's absolutely frustrating when people stumble upon this section
    http://www.oracle.com/technetwork/middleware/fusion-middleware/overview/index.html
    and don't know where to look for a specific application.
    Anyway, my question is, where is Financial Reporting Studio 11.1.2.1 admin guide located? which section?
    I tried to google but no result.
    Thanks for reading.

    @Jeo123:
    http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
    The first link you listed doesn't include Financial Reporting Studio. That's exactly my problem. Most clients I work with have Essbase, Planning, EPMA, and FRS. These are the 4 basic components of Hyperion system.
    @RaulRodriguez:
    The reporting piece is under reporting and analysis:
    http://docs.oracle.com/cd/E17236_01/nav/portal_4.htm
    Thanks.....I actually found that on Google. But unfortunately, I'm on 11.1.2.1. And Oracle's site doesn't have a section set up for 11.1.2.1 like they do for 11.1.2.2. And the problem I have actually goes back to using "Usage Tracking" and setting up through BI+ server that you suggested last time. Since you said that certain method can only be done that way on 11.1.2.1, so I was looking for that doc. Otherwise, I could've used 11.1.2.2 instead.
    Bummer.

  • Error  while logging in to Financial report studio

    Hi,
    while logging in to Financial report studio i am getting this error
    Could not connect to server : Server name
    please make sure that the server is running as specified in the logon dialog(including port number if not default)
    can any 1 help me in this ??????

    for my response i will make the supposition you are trying to connect to an HFM data source to pull data for your reports, lets call it HFMCLUSTER.
    in order for your reports studio to gain connectivity to the HFMCLUSTER data source, you will need to first install the HFM Client on the same machine, along with the ADM driver for connectivity. After it is installed, register the HFMCLUSTER using the Server and Web Configuration Utility (the only tab that will be available will be the Server/Cluster Registration)
    You then enter the name of one of the servers, or the server, that is being used as the HFM server, the cluster name will then appear. Click the "Enable DCOM" button to the right, hit apply, and you're done.

  • Error message when logging into financial reporting studio 11.1.1.3

    I receive the following error message when I attempt to login in to financial reporting studio 11.1.1.3:
    "You are not authorized to use this functionality. Please contact your administrator."
    I'm attempting to login with the default "admin" user that appears to have been automatically provisioned with all user rights.
    I see the following error message in FRClient.log (on the client):
    09-14 13:48:40 ERROR ConfigResourceBundle     Could not find fr_configcache.properties file
    The server components (foundation, fr server, essbase) are on a linux machine and fr studio (along with the common foundation files) are installed on a windows machine.
    The fr_configcache.properties file does not exist on the client but it does on the server.
    Edited by: user5326851 on Sep 14, 2010 1:59 PM

    I tried copying the file fr_configcache.properties to c:\hyperion\products\biplus\lib and this got rid of the error message that shows up in FRClient.log but I still receive the same authorization error message in the GUI.

  • Adhoc Reporting: Webanalysis vs Financial Reporting Studio

    Hi,
    Our client is using Hyperion Planning 9.3.0.1 and currently the business users use Financial Reporting Studio for adhoc reporting. I am wondering if they can use Web Analysis to do this? Are there any performance issues if many users are using Webanalysis at the same time? Is there anything else that I need to keep in mind before advising the client?
    Thanks and Regards,
    Amol
    Edited by: user638718 on Apr 7, 2009 5:28 PM

    Hi,
    Web Analysis is definitely aimed more towards adhoc reporting, it is just general adhoc reporting you can also use the excel addin and smartview.
    I take it you are already licensed to use web analysis ?
    Performance well that all depends on the load that is going to be put on the server, specs of machines, amount of concurrent users etc
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Financial Reporting Studio is not visible in Start Menu in EPM 11.1.2.2

    Hi
    i have installed EPM 11.1.2.2.0, i tried to login to Financial reporting studio and found that it was not installed. Then i manually installed Financial Reporting studio (V31859-01\FinancialReportingStudio\FinancialReportingStudio.exe). I did not receive any error, but i am not able to view Financial Reporting Studio listed in start menu. Where is Financial Reporting studio? how do i login?
    Thanks,
    Veeru

    The client and server have to be exactly the same version, it sometimes worth downloading FR studio from workspace to make sure you have the same version.
    Otherwise log into Oracle support and search for "you are not authorized to use this functionality", you will see lots of results which should help you resolve the problem.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hyperion Financial Reports Studio - Activex error 429

    Greetings Everyone,
    I have recently installed Hyperion Financial Reports Studio 11.1.2.1 on a 64 bit Windows 7 machine using the standalone installer (FinancialReportingStudio.exe)
    After the install, when attempting to launch the client we get the classic run-time error 429 for active x.
    I've had this problem before in previous engagements, and the solution was to run the config utility on the computer and the error would then go away.  The problem is that the standalone installer does not seem to setup/install the configuration utility on the client PC.
    Any suggestions on how to solve the problem?  Already tried running the HRrunant.bat and that didn't help.
    Thanks,

    Good to hear the issue is resolved ...
    However the update you gave contradicts the first update you gave when you started the thread...that it was a 32 bit machine (client)
    "I have recently installed Hyperion Financial Reports Studio 11.1.2.1 on a 64 bit Windows 7 machine using the standalone installer"

  • SSL error logging into Financial Reporting Studio

    We are using Financial Reporting 11.1.2.1, patch 120. We terminate SSL at a load-balancing appliance, therefore, none of the Hyperion services have SSL enabled.
    Users were able to log into Financial Reporting Studio (FRS) using https://servername:port successfully until we installed a new digital certificate in the virtual IP on the load-balancing appliance. Now when the users try to log into FRS, a SSL handshake error is written to the client log file. See below for full error.
    We have restarted all Hyperion services and verified that browser access to the EPM environment is working using https. We also tried uninstalling the FRS client and reinstalling, but get the same error.
    The original digital certificate was not imported on the Hyperion servers or client machines. The new digital certificate has not been imported either.
    Oracle Support said that we need to create a keystore file on each client machine and import the new digital certificate.
    Wondering if anyone else has run into this issue or can explain why we would need to import the new cert on each client, when we never had to import the original cert on the client?
    We also verified that if we revert back to the original cert on the load-balancer, the users can log into FRS.
    Thanks,
    Robin
    FRClientLogging.log:
    [2012-05-15T09:39:19.438-06:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JTH9owO5EgG6yzFg6G1FgbYb000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: getObjectFromURL] [[
    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
         at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1611)
         at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
         at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1035)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:124)
         at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
         at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1112)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:623)
         at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:59)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:506)
         at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2114)
         at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1096)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
         at com.hyperion.reporting.registry.FRSystem.getObjectFromURL(Unknown Source)
         at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
         at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
         at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
    Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
         at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:294)
         at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:200)
         at sun.security.validator.Validator.validate(Validator.java:218)
         at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
         at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
         at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
         at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1014

    fixed by creating local keystore on each client machine, importing the certificate into the keystore and adding the following registry entry on each client machine:
    -Djavax.net.ssl.trustStore=full path to keystore file.
    registry entry added to HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Reports\HReports\JVM
    still no answer from Oracle Support as to why it was necessary to do this for the new certificate when we did not have to do this for the original certificate.

Maybe you are looking for