Financial Reporting Studio client doesn't start in Windows 7 64-bit

I have installed version (11.1.2.756) on my Windows 7 64 bit machine. When I try to start the application it will not start. I am getting the following message. Runtime Error 429 ActiveX component can not create object.
Thanks

Is the windows user/id is having sufficient administrative rights? Have you tried with Administrator id for windows login & then tried to open FR Studio?
If that does not help, try reinstalling FR Studio.
Regards,
Santy

Similar Messages

Financial reporting studio client 11113

hi,all
where can I download financial reporting studio client of version 11.1.1.3?
thanks a lot!

In 11.1.1.3 the FR studio is installed by running the installer(installtool.cmd/installtool.sh) and selecting the FR client .Before that you need to have the files downloaded for 11.1.1.3 :
Oracle Hyperion Enterprise Performance Management System Installer
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 1 of 4
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.3.0 Part 2 of 4
Oracle Hyperion Financial Reporting, Fusion Edition Release 11.1.1.3.0
Oracle Hyperion Financial Management, Fusion Edition Release 11.1.1.3.0
These are the required files.Currently you will not get these in the Oracle E-delivery. You need to raise a non-technical Service Request for the files with Oracle for these.
Hope this helps.

Financial Reporting Studio Client Installation Error

Hi,
today i tried to install Financial Reporting Studio on my own computer to access the data stored on a server landscape. After successfull installation, when I try to login I receive the following error message: You are not Authorized to use this Functionality. Please contact Administrator
Nevertheless, I am the admin so I need to contact myself. I tried a lot of things today and read a lot of threads, still no solution. I can run the Reporting Studio from any of my servers and use the URL http://webserver:19000 It works when run from any of the servers. But when I try it from the "outside" I always get the error above. I can access all other Hyperion Components from my computer, hence the environment is configured right to that extend.
Do you have any suggestions on this error?
Thank you very much,
Best Regards
Philipp
I run: Windows Vista
FinRep Studio: 11.1.0.2507

I have the same issue with 11.1.1.3 and Windows 7 which we recently installed.. Initially, Financial Reporting would not launch but after we did the steps mentioned below, we the studio opens and we can access our Repository. However, we get a 'Failed to connect to Server...' for each of our HFM and Essbase reports. Any ideas?
Thx,
Mike
We followed the below steps
manually copy the following folders and files from a working 32-bit Windows machine:
<HYPERION>\common\JRE (This is needed for Studio startup.)
<HYPERION>\common\ADM\9.5.0.0\Essbase (This is needed for data source connections.)
<HYPERION>\products\biplus\lib\fr_client.properties (This defines the FR Client Logging settings.)
<HYPERION>\products\biplus\lib\fr_global.properties (This is needed to define the default
RMI port (FR Studio will try to use 1099 otherwise) and the location of the fr_client.properties file (or else the FRClient.log file doesn't get created).)
Note that if the Java Runtime (<HYPERION>\common\JRE ) was missing after initial installation, it will be necessary to manually execute <HYPERION>\products\biplus\install\bin\HrRunAnt.cmd. This is a Windows batch file used to perform post-install configuration steps; it depends on the presence of the java Runtime.

Ports required to be opened for Financial Reporting Studio Client access

Hi Everyone,
What are the exact ports which are required to be opened between the client machines and the Report Server so that users are able to use the Reporting Studio. (I guess opening port 8200 only will not suffice, will it?)
Thanks,
Sayantan

Sayantan,
Chapter 15 of the Financial Studio Report documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/fr_user.pdf) specifically pages 300 to 311 explain the default setup ports, the amount of Essbase ports required and such.
JTS

Hyperion Financial Reports Studio Client Question

Hi,
I have a colleague that is on 11.1.1.3.0.0238 Financial Reports Client. He can connect to the server just fine. However when I try, I get the ole 'You are not authorized to use this functionality. Contact your Admiinistrator'. However when I use my login/pw on his machine I connect just fine.
So I need to make sure my client is same version. Is there a file I can copy from his install directory to mine that will make them the same? I can't get the patches as I have no Support Identifier. Usually it's just replacing a few files?
Thanks

11.1.1.3.0.0238 should be the unpatched version of Financial Reporting, if you log into workspacew and go to help > about > details you will see the version of financial reporting.
The server and client usually have to be the same version for it to work so unless you have patched your client you are probably on the same version, if you have patched it then you should be able to tell from Opatch
If you are not sure then it may be easier just to uninstall FR Studio and install the base version.
You could also open up or extract HReports.jar which is in the <HYPERION_HOME>\products\biplus\lib folder, go into the META-INF folder, view MANIFEST.MF and look for Implementation-Version:
There are lots of articles in Oracle Support around the error message you are getting, if you have no support identifier I am sure you will know somebody in your company that should have access.
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion Financial Reports Studio - Activex error 429

Greetings Everyone,
I have recently installed Hyperion Financial Reports Studio 11.1.2.1 on a 64 bit Windows 7 machine using the standalone installer (FinancialReportingStudio.exe)
After the install, when attempting to launch the client we get the classic run-time error 429 for active x.
I've had this problem before in previous engagements, and the solution was to run the config utility on the computer and the error would then go away. The problem is that the standalone installer does not seem to setup/install the configuration utility on the client PC.
Any suggestions on how to solve the problem? Already tried running the HRrunant.bat and that didn't help.
Thanks,

Good to hear the issue is resolved ...
However the update you gave contradicts the first update you gave when you started the thread...that it was a 32 bit machine (client)
"I have recently installed Hyperion Financial Reports Studio 11.1.2.1 on a 64 bit Windows 7 machine using the standalone installer"

Hyperion financial reporting studio not responding

hi all,
I have Hyperion financial reporting studio "client" (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
The machine configuration is:
P4 3.0 GHz and 1 GB RAM.
When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
CPU usage:fluctuates between 45 - 100% which was initially 1%
PF usage:jumps to 1.32GB which was initially 362MB
Physical memory available : drops down from 762188(K) to 1728(K)
application status: Not responding
AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .There is no error log created ??
I cannot proceed further. Please help me out...
Thanks in advance

Please post these type of queries to Hyperion BI Workspace & Reporting module

Hyperion Financial Reporting Studio "Failed to Connect to Server"

One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
We've searched help documentation and other threads in this forum but haven't been able to find what we need.
We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
Thanks.

We had the same issue after installing the Financial Reporting Studio client.
If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem.

Financial reporting studio not responding

hi all,
I have Hyperion financial reporting studio client (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
The machine configuration is:
P4 3.0 GHz and 1 GB RAM.
When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
CPU usage: jumps to 100% which was initially 1%
PF usage:jumps to 1.32GB which was initially 362MB
Physical memory available : drops down from 762188(K) to 1728(K)
Application status : Not responding.
AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .
THIS PROCESS TAKES ALMOST 1 MIN.
I cannot proceed further. Please help me out...
Thanks in advance

Hi,
Upgrade the RAM to 2GB, as FR studio consumes more than .75 GB
Regards
Veeru

Financial Reporting Studio is not visible in Start Menu in EPM 11.1.2.2

Hi
i have installed EPM 11.1.2.2.0, i tried to login to Financial reporting studio and found that it was not installed. Then i manually installed Financial Reporting studio (V31859-01\FinancialReportingStudio\FinancialReportingStudio.exe). I did not receive any error, but i am not able to view Financial Reporting Studio listed in start menu. Where is Financial Reporting studio? how do i login?
Thanks,
Veeru

The client and server have to be exactly the same version, it sometimes worth downloading FR studio from workspace to make sure you have the same version.
Otherwise log into Oracle support and search for "you are not authorized to use this functionality", you will see lots of results which should help you resolve the problem.
Cheers
John
http://john-goodwin.blogspot.com/

Financial Reporting Studio 11.1.2.1 admin documentation?

I'm very troubled with the way how Oracle sets up its website and naming. Sorry for venting a bit
But it's absolutely frustrating when people stumble upon this section
http://www.oracle.com/technetwork/middleware/fusion-middleware/overview/index.html
and don't know where to look for a specific application.
Anyway, my question is, where is Financial Reporting Studio 11.1.2.1 admin guide located? which section?
I tried to google but no result.
Thanks for reading.

@Jeo123:
http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
The first link you listed doesn't include Financial Reporting Studio. That's exactly my problem. Most clients I work with have Essbase, Planning, EPMA, and FRS. These are the 4 basic components of Hyperion system.
@RaulRodriguez:
The reporting piece is under reporting and analysis:
http://docs.oracle.com/cd/E17236_01/nav/portal_4.htm
Thanks.....I actually found that on Google. But unfortunately, I'm on 11.1.2.1. And Oracle's site doesn't have a section set up for 11.1.2.1 like they do for 11.1.2.2. And the problem I have actually goes back to using "Usage Tracking" and setting up through BI+ server that you suggested last time. Since you said that certain method can only be done that way on 11.1.2.1, so I was looking for that doc. Otherwise, I could've used 11.1.2.2 instead.
Bummer.

Export FR without using Financial Reporting Studio

Good morning.
Is that possible to get the reports designed at Financial Reporting Studio to import into another machine?
I'm asking this because I ain't able to access this machine anymore. So, did an other machine, but now, with a new database, with no reports =)
Thanks.
Cheers,
Rafael Marques

I know that there is a report migration tool as we used it when we went from 7.2.5 to 9.3.1. I'm not 100% if you can make use of it as a simple 'copy' tool (i.e. copying same software version reports from one server to the next or if it only works in a specific upgrade capacity); however, I would start on that route first.
I think the road block you will hit there; however, is that I think the environment would need to be up and running for this utility to work.
If that is the case, the manual route is ugly. As I've talked about in a prevoius post, reports (since system 9) are scattered in a couple different pieces. In the Workspace database, you will find information that ties a UUID (Unique Identifier) to a 'Friendly Name'. In the file system of your server running the RM web application, you will find the actual report files. The files / folders for the reports are not human friendly; therefore, you need the DB to fix the names. The other issue you have here is the database connection for the reports. When you create a database connection it also gets a generated Unique ID value which is stored in the reports. If that ID does not exist in the target system, you need to update all of the reports; otherwise, they will not work correctly.
If I HAD to do this manually (i.e. old workspace isn't operational so I can't export), here's what I would do ..........
------- WARNING ------------ I don't think anyone here is going to approve of this method and I really don't either, but ....................
"Old System" to "New System"
#1 - New System --> create your database connection(s), preferably with same name(s) as previous environment
#2 - Old --> Locate naming information in Workspace database tables (If you don't know where this is, find a previous post I put out on reports and the database where I explain this)
#3 - Old --> Locate the physical files / directories (See previous post on subject)
#4 - Old --> Find at least ONE report for EACH database connection used in the old system. Open the file(s) in notepad and locate the connection ID. (NOTE : Files are compressed so get something like 7zip to get into them)
#5 - New --> Open the Workspace database, locate the database connection information. For each connection you have created, update the ID to correspond to the ID found in the reports.
At this point, we have a couple of different options......
Option 1 - Create your own export archive
Now that you know where all of the old reports are and you know the proper naming of the reports, you can make your own export archive which you can then import into the new environment. The structure of the 7zip archive would be something like this
ReportExtract.7z
(null) Folder --> This would correspond to your Root folder in Workspace
My Report Folder 1 --> Your workspace stuff here
My Report Folder 2 --> Etc.
The import thing to recognize here is that when you first open the 7z file, you have to have that NULL folder; otherwise, this doesn't work. I'm not sure how to create such a null folder, so what I normally do is create an extract file using the Workspace Export option and then use 7zip to alter the archive to include what I really want ....
#1 - Old --> Fix names. Using the information from the workspace database write a quick script to traverse the file / folder structure and renaming all folders and files so that they have the friendly name.
#2 - Old --> For the files that were just renamed, uncompress them. This can be accomplished with a bat file script as well.
#3 - New --> Go to File Export and choose the highest folder you can and export all items. Save the file somewhere handy as you're going ot need this right away.
#4 - Old --> Open the archive with 7zip. You will see a folder with no name, double click on it. Now you should see the beginning of your report structure (if you have one on the new environment....)
#5 - Old --> Using windows explorer, DRAG and DROP the folders/files from steps #1/#2 into the 7zip window. 7zip will then add those folders/files to the report archive we created.
#6 New --> Login to workspace and select the File, Import option. Proceed to use the archive created previously. If everything is done correctly, the reports will pull in and you will be good to go at this point. (OTHER THAN SECURITY)
Option 2 - Manually Copy Files/Folders and Database entries
While in theory this is slightly quicker, I've never attempted so I won't say for fact this will work. I would probably only recommend trying this is the old and new machines are running the SAME version of software AND the new machine has nothing added to it yet.....
#1 - Locate RM1 service folder and copy all files/folders to new server's RM folder
#2 - Locate the old database tables related to report files/folders/permissions/data connections and copy data into new database tables.

Error while logging in to Financial report studio

Hi,
while logging in to Financial report studio i am getting this error
Could not connect to server : Server name
please make sure that the server is running as specified in the logon dialog(including port number if not default)
can any 1 help me in this ??????

for my response i will make the supposition you are trying to connect to an HFM data source to pull data for your reports, lets call it HFMCLUSTER.
in order for your reports studio to gain connectivity to the HFMCLUSTER data source, you will need to first install the HFM Client on the same machine, along with the ADM driver for connectivity. After it is installed, register the HFMCLUSTER using the Server and Web Configuration Utility (the only tab that will be available will be the Server/Cluster Registration)
You then enter the name of one of the servers, or the server, that is being used as the HFM server, the cluster name will then appear. Click the "Enable DCOM" button to the right, hit apply, and you're done.

Error message when logging into financial reporting studio 11.1.1.3

I receive the following error message when I attempt to login in to financial reporting studio 11.1.1.3:
"You are not authorized to use this functionality. Please contact your administrator."
I'm attempting to login with the default "admin" user that appears to have been automatically provisioned with all user rights.
I see the following error message in FRClient.log (on the client):
09-14 13:48:40 ERROR ConfigResourceBundle Could not find fr_configcache.properties file
The server components (foundation, fr server, essbase) are on a linux machine and fr studio (along with the common foundation files) are installed on a windows machine.
The fr_configcache.properties file does not exist on the client but it does on the server.
Edited by: user5326851 on Sep 14, 2010 1:59 PM

I tried copying the file fr_configcache.properties to c:\hyperion\products\biplus\lib and this got rid of the error message that shows up in FRClient.log but I still receive the same authorization error message in the GUI.

Does Financial Reporting Studio need to be uninstalled before patching?

Hi Guys,
Moving forward on my patch plan, I am stuck again, this time with the ambiguity in the documentation. I am trying to apply the Financial Reporting Patch 13997553. While going through the documentation, I found two ambiguous statements. In step2, the doc says that I need to uninstall the FR studio (Doesnt say on which machine I need to uninstall). Later in step9, it says, on FR studio Machines, uninstall the FR studio.
As per my assumption, in step2, I have to uninstall it from the Server and in Step9 I need to unistall it from my local machine. But the document never talked about re-installing the FR studio on server. What am I missing here?
Help appreciated. Thanks!
Here's part of readme which confused me -
APPLYING THE PATCH_
The section includes important information about applying this patch for Oracle Hyperion Financial Reporting, Fusion Edition.
To apply this patch:
1. Shut down all services and servlet instances related to the Oracle Hyperion EPM Release 11.1.2.2.00 installation.
2. Uninstall the Financial Reporting Studio by going to Control Panel, Add or Remove Programs, and then uninstall Financial Reporting Studio.*
3. On On the Financial Reporting server machines; Download and unzip the downloaded patch file, <PATCH FILE NAME>.zip, to the <EPM_ORACLE_HOME>/OPatch directory (by default, Oracle/Middleware/EPMSystem11R1/OPatch).
NOTE: <PATCH FILE NAME>.zip is the name that My Oracle Support assigns to this patch. When you download the file, a message indicates the file name.
4. On On the Financial Reporting server machines, from a command line, change the directory to <EPM_ORACLE_HOME>/OPatch.
5. To apply the patch, enter the following command on one line:
Windows:
opatch.bat apply <EPM_ORACLE_HOME>/OPatch/<PATCH DIRECTORY> -oh <EPM_ORACLE_HOME>
-jdk <MIDDLEWARE_HOME>/jdk160_29
NOTE: The default for <EPM_ORACLE_HOME> is C:/Oracle/Middleware/EPMSystem11R1. The default for <MIDDLEWARE_HOME> is C:/Oracle/Middleware.
UNIX/Linux:
./opatch apply <EPM_ORACLE_HOME>/OPatch/<PATCH DIRECTORY> -oh <EPM_ORACLE_HOME> -jdk <MIDDLEWARE_HOME>/jdk160_29 -invPtrLoc <EPM_ORACLE_HOME>/oraInst.loc
NOTE: The default for <EPM_ORACLE_HOME> is $HOME/Oracle/Middleware/EPMSystem11R1. The default for <MIDDLEWARE_HOME> is $HOME/Oracle/Middleware.
6. Delete the Financial Reporting precompiled jsp files located at: <ORACLE_HOME>\Middleware\user_projects\domains\EPMSystem\precompiled\hr
7. Restart Oracle Hyperion EPM services and servlets.
8. All users should now clear cached files from their browsers.
“For WebSphere deployments, you must use EPM System Configurator to redeploy the Web application.”
9. On the Financial Reporting Studio machines; Uninstall the Financial Reporting Studio by going to Control Panel, Add or Remove Programs, and then uninstall Financial Reporting Studio.*
10. Connect to the EPM Workspace machine that was patched in Step 3. Download the Financial Reporting Studio installer from the EPM Workspace menu: From the Tools menu, select Install and then select Financial Reporting Studio and then launch the installer. Follow the installation guide to install the Financial Reporting Studio to the location you want.
11. All users should now clear cached files from their browsers.

JohnGoodwin wrote:
Uninstall the FR studio on any machines that it has been installed on, then once patched you can download the latest FR Studio from workspace and then install.
You will find that it is installed by going to the start menu - Oracle - Financial Reporting StudioSo if i got you right,
-I need to uninstall the FR studio from all the machines (including the server).
-Apply the Patch.
-Install FR studio back again
And this whole process has nothing to do with Financial Reporting Web App.
Thanks!

Financial Reporting Studio client doesn't start in Windows 7 64-bit

Similar Messages

Maybe you are looking for