Financial Reporting studion installation issue

Hi,
I am not able to see the financial reporting studio tab after the installation of Hyperion suit.
We have configured financial reporting as well still we cannot able to see and open financial reporting.
I have tried to open studio from worksapce, but explore button is not visible. My ID is having admin rights.
Please suggest, how can I open financial reporting?
Thanks
Sri

Getting below error message at the time of installing FR studio from workspace. Error 401--Unauthorized From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1: 10.4.2 401 Unauthorized The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11. Thanks Sri

Similar Messages

Hyperion Financial Reports - Member selection issue

Hi,
We are using Hyperion suite 9.2.0.3. We get an error during Member selection in POV when executing a book or report. The member selection window looks blank.
We have tried restarting the services of Financial report and Essbase. But no luck.
Can someone help us in getting this issue resolved.
Thanks,
Sethu

I'm not sure I have a good answer for you, but in my experience blank screens are usually caused by failing weblogic, apache, or a firewall setting.
You might have better success getting an answer in the Hyperion Query and Reporting forum.
Hyperion Query and Reporting
Good Luck,
Tim Young

Financial Reporting Studio Preferences Issue

Hi all,
I have small issue. when i loginto workspace, File -> preferences -> Financial Reporting -> General -> 'Setup Members...' for "Location of POV", I got the following error message.
*"com.hyperion.reporting.util.HyperionReportException: Error Loading DatasourceList to Repository*
*     com.hyperion.reporting.datasource.HrDatasourceManagerImpl.load(Unknown Source)*
*     com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)*
*     com.hyperion.reporting.datasource.HrDsManagerBean.getDsComboList(Unknown Source)*
*     org.apache.jsp.modules.com.hyperion.reporting.web.common.HRPrefsPOV_jsp._jspService(HRPrefsPOV_jsp.java:1229)*
*     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)*
*     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)*
*     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)*
*     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)*
*     com.hyperion.reporting.webviewer.HRLocaleFilter.doFilter(Unknown Source)"*
So Pls help me to resolve this issue.
thanks in advance.

Hi Seb L,
As you suggest me, i restarted my PC. When again connected to FR studio -> It gives error. I opened the "FRClient.log" file, the content looks like this
*"01-05 19:11:02 ERROR HrGlobalMethods     uncompressBytes()*
*01-05 19:11:02 ERROR HrGlobalMethods     Exception occured: null*
*01-05 19:11:02 ERROR HrGlobalMethods     java.lang.NullPointerException*
*     at java.io.ByteArrayInputStream.<init>(Unknown Source)*
*     at com.hyperion.reporting.util.HrGlobalMethods.uncompressBytes(Unknown Source)*
*     at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.load(Unknown Source)*
*     at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)*
*     at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)*
*     at com.hyperion.reporting.javacom.HrDatasourceManagerComImpl.getAllDatasources(Unknown Source)*
*01-05 19:11:02 ERROR HrDatasourceManagerImpl     Exception occured: null*
*01-05 19:11:02 ERROR HrDatasourceManagerImpl     java.lang.NullPointerException*
*     at java.io.ByteArrayInputStream.<init>(Unknown Source)*
*     at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.load(Unknown Source)*
*     at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)*
*     at com.hyperion.reporting.datasource.HrDatasourceManagerImpl.getDatasources(Unknown Source)*
*     at com.hyperion.reporting.javacom.HrDatasourceManagerComImpl.getAllDatasources(Unknown Source)"*
Pls guide me.
thanks in advance.

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

FIM Reporting Re-Installation Issue

We have recently upgraded the entire FIM Environment from 4.1.3451.0 to 4.1.3510.0
For FIM Service, I have un-installed Reporting feature, installed the patched successfully, however when trying to re-install Reporting feature back onto the FIM Service Node it throws KB2561430 missing error. I have made sure KB2561430 and all the latest SCSM
Cumulative updates are in place on SCSM and all the FIM Service Nodes
I tried to install the Reporting feature using the work around provided by MS, tried to install it using the command line for unattended installation and have made sure the value for EXISTINGDATABASE=1 and other parameters passed in the command are correct.
The unattended installation goes through fine, however I don't see Reporting feature installed when we go through Add/Remove Programs.
Can I remove FIM Service completely from the Server and try a clean install instead.
Has anyone experienced this kind of an issue, Any advice will be highly appreciated!
Thanks,
Abhishek.

Hi,
Install update 4.1.3461.0. Refer below link, it will resolve this issue.
http://support.microsoft.com/kb/2870703
Enayathulla.S
Why do you propose earlier patch once they patched it with more current version?
Abhishek,
You have uninstalled reporting and, during command line patching, you have re-used the same database. The same, so
without reporting. So behaviour is OK. You should use command line with EXISTINGDATABASE=1 but with SERVICE_MANAGER_SERVER=SCSMSERVER also.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Crystal Reports Software Installation Issue

When I try to install Crystal reports on my Dell Optiplex 780 running Win XP SP3, 3.5 GB ram, with Adobe 9 installed and License accepted I get Error 1713 unable to intall one of it's required products. What do I need to do to complete the installation?
Ron

Error 713 is a generic Microsoft install error. E.g.; google the error, see if any of the suggestions apply. Also, use the search string 'Error 1713 crystal' in the search box at the top right corner of this web page. See if any of the results there help. E.g.;
Crystal Reports XI -- Error 1713. Crystal Reports XI cannot install one of
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal Reports 2011 Installation Issue, key code not valid

Folks,
We have just purchased two licenses for the Crystal 2011 upgrade from DigitalRiver. The installation completes successfully, using one of the two "digital rights" keys that were provided in the confirmation email from DigitalRiver.
Upon launching Crystal Reports 2011 for the first time, though, we are being prompted with a License Manager window asking to add a key code for Crystal Reports. We enter the "digital rights" key provided by DigitalRiver, the same one used during the installation [copy and pasted from the email for accuracy] and receive the error message "The key code you just typed is not valid, please try again."
Canceling this window or clicking Ok simply closes the Crystal Reports application.
Any assistance in how to get the application running would be helpful.
Tested Environments:
Windows 7 Professional SP1, 32bit
Visual Studio 2010 w/ CR for Visual Studio 2010 installed
Windows Server 2008 R2, 64bit
Thanks,
Jeff

Follow-up:
We went through several iterations of installation and finally decided to mix things up to see if we could get a different response from the software. The items that we performed differently were as follows:
1. Ran the setup.exe as administrator [even though we have full admin access as the logged in user]
2. Hand typed the digital rights key rather than cut/paste from the email
3. Performed a custom installation rather than the default and de-selected all of the SAP and other software integration options.
The software ran fine without prompting with the License Manager.
My guess is that it was the removal of the integration pieces that allowed the application to run. We'll perform our next install with just that change and see if it is the culprit.
Jeff

Reporting server installation issue

Hello,
I have a problem while installing SCOM 2012 R2 Reporting server. My configuration is as follows:
1) 3 servers - 1 database server on SQL 2012 Standard SP2 + 2 SCOM 2012 R2 Management servers
2) all servers on Windows 2012 R2 Standard
3) Windows Firewall is disabled on all servers
4) DB server + Reporting server is installed on SQL server
5) I am able to access SQL Reporting server URLs
6) Account I am using to install is local admin on SQL and SCOM management server and has public and sysadmin role in SQL
During the installation I got error messages below. Any idea?
[17:05:40]: Error: :ModifySRSServiceAccount failed.: Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BE, Exception.Message:
[17:05:40]: Error: :StackTrace:   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
String srsDBName)
[17:05:40]: Warn: :Message:SetSRSSecurity Exception Exception: . Will retry..
[17:05:40]: Debug: :Now Sleeping for : 60000 milliseconds
[17:06:40]: Debug: :More: 4 rety to go..

Hi,
Did you install SCOM reporting on the SQL server which has SQL Reporting service running?
Have you followed the link below:
http://www.rickygao.com/step-by-step-installing-system-center-2012-r2-operation-manager/
In which step you got this error. How about changing another admin account to install the reporting server?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Financial Reporting - Essbase alias issue

Hi,
issue with FR or Essbase.
i have two applications. ASO has the same outline with BSO(planning).
both of them have same alias table in Arabic.
problem is i created two reports(one is copy of the other).
RPT1(ASO Datasouce): member1 alias is not displaying. member2 alias is displaying.
RPT2(Planning Datasource): member1 alias is displaying but now member2 alias disappeared.
i cant get what is the issue. (there is no copy/paste no special/bad character. i typed those aliases myself)
thanks in advance.

its about member aliases.
i tried both member labels and custom headings and all of combinations at the right side Heading Row Properties pane.
whenever i select an english alias table for those reports, they work fine all aliases are displaying. whenever i select an arabic alias table, fail.
also i've tried to use functions +<< MemberAlias(.......) >>+ but didn't work neither.

Reporting point installation issues

OK I have inherited a SCCM SCOM environment and all DBs including WSUS are installed in the same instance. Yuck. I made a fuss to the DB Admins and they said Oh Its fine, you just need to install seperate SSRS instances and it will work, look
see here is an article stating so.
So I have installed seperate SSRS instances and am trying to get the reporting point to install with no luck. Anyone have the steps involved in getting this working? When I go to add the reporting point no SQL instance is showing up to select
from. Please help. Thanks kindly.

Hi,
This problem might be related to firewall. You could have a look on the following thread.
http://social.technet.microsoft.com/Forums/en-US/4479e73e-8a19-4c7e-9418-b36770656b9b/sccm-2012-reporting-point-server-instance-blank
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in configuration of financial reporting in workspace web server

Hello,
I met an issue few days ago, and impossible for me to correct...
My installations are as following :
Server A :
Foundation Services
Workspace Services
EPMA + Calc Manager
EAS
Server B :
Planning
Worskpace Web
Financial Reporting
Server C :
Worskpace Web
Financial Reporting
I try to install a 4th Server exactly as the Server C.
Installation of Workspace Web : OK
Configuration of Workspace Web : OK
Installation of Financial Reporting : OK
Configuration of Financial Reporting : OK
Configuration of Foundation Workspace WebServer : KO
The configtool.err says :
(Apr 21, 2013, 02:08:23 AM), com.hyperion.avalanche.config.WebServerConfigurationTaskProcessor, ERROR, Error in web server configuring: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(Unknown Source)
at java.util.ArrayList.get(Unknown Source)
at com.hyperion.avalanche.HttpServerConfigurator.getWebComponentsList(HttpServerConfigurator.java:1247)
at com.hyperion.avalanche.HttpServerConfigurator.configureApache2(HttpServerConfigurator.java:246)
at com.hyperion.avalanche.HttpServerConfigurator.configure(HttpServerConfigurator.java:181)
at com.hyperion.avalanche.config.WebServerConfigurationTaskProcessor.execute(WebServerConfigurationTaskProcessor.java:70)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
After this configuration error, everything is ok in the worskpace except Financial Reporting elements.
After this configuration error, every configuration fails, I'm obliged to uninstall all the components of this server (Workspace Web and Financial Reporting).
This issue comes from the configuration of Financial Reporting in Workspace Web : Financial reporting is available from worskpaces of servers B and C.
Thanks for helping us.

hi,
maintain ports in xi system with naming convention <SAP(system id of R/3 )>EX: SAPSR3,and assign proper RFC destination to it...and in the same way do it in R/3 system
Check note 838560 for "RFC_ERROR_SYSTEM_FAILURE "
and Depending on what database you use check the database logs.
U can check with this RFC_ERROR_SYSTEM_FAILURE link,
http://help.sap.com/saphelp_erp2005/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Does Financial Reporting Studio need to be uninstalled before patching?

Hi Guys,
Moving forward on my patch plan, I am stuck again, this time with the ambiguity in the documentation. I am trying to apply the Financial Reporting Patch 13997553. While going through the documentation, I found two ambiguous statements. In step2, the doc says that I need to uninstall the FR studio (Doesnt say on which machine I need to uninstall). Later in step9, it says, on FR studio Machines, uninstall the FR studio.
As per my assumption, in step2, I have to uninstall it from the Server and in Step9 I need to unistall it from my local machine. But the document never talked about re-installing the FR studio on server. What am I missing here?
Help appreciated. Thanks!
Here's part of readme which confused me -
APPLYING THE PATCH_
The section includes important information about applying this patch for Oracle Hyperion Financial Reporting, Fusion Edition.
To apply this patch:
1. Shut down all services and servlet instances related to the Oracle Hyperion EPM Release 11.1.2.2.00 installation.
2. Uninstall the Financial Reporting Studio by going to Control Panel, Add or Remove Programs, and then uninstall Financial Reporting Studio.*
3. On On the Financial Reporting server machines; Download and unzip the downloaded patch file, <PATCH FILE NAME>.zip, to the <EPM_ORACLE_HOME>/OPatch directory (by default, Oracle/Middleware/EPMSystem11R1/OPatch).
NOTE: <PATCH FILE NAME>.zip is the name that My Oracle Support assigns to this patch. When you download the file, a message indicates the file name.
4. On On the Financial Reporting server machines, from a command line, change the directory to <EPM_ORACLE_HOME>/OPatch.
5. To apply the patch, enter the following command on one line:
Windows:
opatch.bat apply <EPM_ORACLE_HOME>/OPatch/<PATCH DIRECTORY> -oh <EPM_ORACLE_HOME>
-jdk <MIDDLEWARE_HOME>/jdk160_29
NOTE: The default for <EPM_ORACLE_HOME> is C:/Oracle/Middleware/EPMSystem11R1. The default for <MIDDLEWARE_HOME> is C:/Oracle/Middleware.
UNIX/Linux:
./opatch apply <EPM_ORACLE_HOME>/OPatch/<PATCH DIRECTORY> -oh <EPM_ORACLE_HOME> -jdk <MIDDLEWARE_HOME>/jdk160_29 -invPtrLoc <EPM_ORACLE_HOME>/oraInst.loc
NOTE: The default for <EPM_ORACLE_HOME> is $HOME/Oracle/Middleware/EPMSystem11R1. The default for <MIDDLEWARE_HOME> is $HOME/Oracle/Middleware.
6. Delete the Financial Reporting precompiled jsp files located at: <ORACLE_HOME>\Middleware\user_projects\domains\EPMSystem\precompiled\hr
7. Restart Oracle Hyperion EPM services and servlets.
8. All users should now clear cached files from their browsers.
“For WebSphere deployments, you must use EPM System Configurator to redeploy the Web application.”
9. On the Financial Reporting Studio machines; Uninstall the Financial Reporting Studio by going to Control Panel, Add or Remove Programs, and then uninstall Financial Reporting Studio.*
10. Connect to the EPM Workspace machine that was patched in Step 3. Download the Financial Reporting Studio installer from the EPM Workspace menu: From the Tools menu, select Install and then select Financial Reporting Studio and then launch the installer. Follow the installation guide to install the Financial Reporting Studio to the location you want.
11. All users should now clear cached files from their browsers.

JohnGoodwin wrote:
Uninstall the FR studio on any machines that it has been installed on, then once patched you can download the latest FR Studio from workspace and then install.
You will find that it is installed by going to the start menu - Oracle - Financial Reporting StudioSo if i got you right,
-I need to uninstall the FR studio from all the machines (including the server).
-Apply the Patch.
-Install FR studio back again
And this whole process has nothing to do with Financial Reporting Web App.
Thanks!

Financial Reporting Studio Client Installation Error

Hi,
today i tried to install Financial Reporting Studio on my own computer to access the data stored on a server landscape. After successfull installation, when I try to login I receive the following error message: You are not Authorized to use this Functionality. Please contact Administrator
Nevertheless, I am the admin so I need to contact myself. I tried a lot of things today and read a lot of threads, still no solution. I can run the Reporting Studio from any of my servers and use the URL http://webserver:19000 It works when run from any of the servers. But when I try it from the "outside" I always get the error above. I can access all other Hyperion Components from my computer, hence the environment is configured right to that extend.
Do you have any suggestions on this error?
Thank you very much,
Best Regards
Philipp
I run: Windows Vista
FinRep Studio: 11.1.0.2507

I have the same issue with 11.1.1.3 and Windows 7 which we recently installed.. Initially, Financial Reporting would not launch but after we did the steps mentioned below, we the studio opens and we can access our Repository. However, we get a 'Failed to connect to Server...' for each of our HFM and Essbase reports. Any ideas?
Thx,
Mike
We followed the below steps
manually copy the following folders and files from a working 32-bit Windows machine:
<HYPERION>\common\JRE (This is needed for Studio startup.)
<HYPERION>\common\ADM\9.5.0.0\Essbase (This is needed for data source connections.)
<HYPERION>\products\biplus\lib\fr_client.properties (This defines the FR Client Logging settings.)
<HYPERION>\products\biplus\lib\fr_global.properties (This is needed to define the default
RMI port (FR Studio will try to use 1099 otherwise) and the location of the fr_client.properties file (or else the FRClient.log file doesn't get created).)
Note that if the Java Runtime (<HYPERION>\common\JRE ) was missing after initial installation, it will be necessary to manually execute <HYPERION>\products\biplus\install\bin\HrRunAnt.cmd. This is a Windows batch file used to perform post-install configuration steps; it depends on the presence of the java Runtime.

Issues in Shared Services, Workspace & Financial Reporting

Hi All,
I am working on hyperion 9.3.1.
I have two issues. Someone help me in this sistuation
1) In shared servcies, I cant able to access my planning application. If i click the planning application its *"Loading for a long time"*
Note : I updated the Patches *8527948* for 9.3.1. Still i am facing the error.
2) I created two classic applications in planning and registered with shared services. I cant see the planning application in workspace.
3) I can't access Financial Reporting through workspace. Please let me know the url for FR.(http://localhost:8200/hr/index.jsp - If i give this url its redirect to workspace)
My Installation Order:
1) Shared Services
2) Essbase
3) EAS
4) Report and Analysis UI Services
5) Report and Analysis
6) Planning
Please guide me in this situtation.
Thanks,
PC

Hi,
On the issue of not seeing the planning applications, have you tried reconfiguring the web server part for Reporting & Analysis in the config utility, you probably have to do this if you configured planning after reporting & analysis
What do you mean you can't access Financial Reporting ? You need to create a report using the Financial Reporting Studio client then save the report to workspace.
The report is then accessed through explore in workspace.
Cheers
John
http://john-goodwin.blogspot.com/

Financial reporting 11 1 2 2 Access issue for a user

Hi All,
I have a report designer group for Financial reporting 11.1.2.2. I have created a group called FR_GROUP in HSS and provide them the report designer access and added three MSAD users.
Now as admin we have a created a folder in workspace called FR and gave the group FR_GROUP Full acces to this folder FR.
Now the issue is the MSAD user who created the repot in FR folder can see the reports and open them and also the admin user but the other two MSAD users cant see the reports.
Any ideas how to fix this access issue?
Thanks,

Hi,
Try provisioning the FR_GROUP with Explorer role. Just in case here is the whole list of Reporting and Analysis Roles:
http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200/apas04.html
Cheers,
Mehmet

Financial Reporting studion installation issue

Similar Messages

Maybe you are looking for