Financial Reports and Attribute Dims

Hi,
Is it possible to include Attributes in a Financial Report and subtotal by the particular Attribute by employee? For Example:
Column Definition has Account = Insurance Cost with a scenario version etc.....
Jan Feb Mar Qtr1
Smith, John Cigna PPO 10 10 10 30
Jones, Justin Cigna PPO 12 12 12 36
SubTotal - Cigna PPO 22 22 22 66
Long, Brad Kaiser 30 30 30 90
Harvey, Bill Kaiser 24 24 24 24
SubTotal - Kaiser 54 54 54 54
Grand Total 76 76 76 120
Where Column 2 'Type' is an attribute assigned to the Employee in Column 1. Also what if column 2 was a 'SmartList' in Accounts dimension instead? Right now outline is a Smart List however getting it to Subtotal is impossible I think as the SmartList is an Account named 'Plan Type' thus it has t be in columns as the report has Account = Insurance Cost in the column definition too.....

Hi
In answer to your first question yes it is possibe to report a dimension by its associated attribute. You will need to drag the attribute dimension and the employee dimension onto the rows for the grid. You may want to play around with whether the attribute dimension comes before or after the employee dimension to see whether there is a noticeable performance difference.
If I am reading your post correctly you currently want to have:
Column1 - Employee
Column2 - Attribute / SmartList
Column3 - Account (Insurance) > Jan
Column4 - Account (Insurance) > Feb
Column5 - Account (Insurance) > Mar
Column6 - Account (Insurance) > Q1
This will work fine for an attribute but if you want Column 2 to be a smartlist then you would have to put your account dimension into columns and that would mean that your smartlist would have to appear in only 1 period, i.e. if it changes from Jan to Feb then you would need more than one column to report it. It will also be harder to get a subtotal using a smartlist, with an attribute the subtotal will naturally be available by selecting the top member of the Employee dimension with your attribute (it will dynamically sum all members with the attribute you are calling).
Hope this helps
Stuart

Similar Messages

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

Checklist for installation of Financial reporting and web analysis

Hello All,
Can anyone give me a checklist for installation of Financial reporting and web analysis. The checlist should contain the points/information that the installed FR and WA is proper or not. Please let me know if this this is the correct forum for reporting doubts, if not then plz guide me to the correct oracle forum.
Thanks a lot
Ashu

For which version?
Here is the link for 11.1.1.3 EPM Deployment:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_1.htm
And specifically for Reporting and WA:
http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/ra_1111300_readme.html
Hope this helps.
A

Weblogic preventing financial reporting and RAF from being accessed

Hi all,
11.1.2.1 (linux)
Web logic has financial reporting and RAF in ADMIN mode which is preventing them beign accessed. All other components are fine. The web server config step succeeded and both products were listed as being configured. I logged into the weblogic admin console and saw all products had a status if RUNNING except for FR and RAF. I tried shutting them down by force and starting them but it restarts, after a minute or so, in ADMIN mode. I have checked the startup mode and it is set to RUNNING.
I have checked the weblogic logs and I can't see any indication of the cause.
Has anyone experienced this?
Thanks,
Nathan

Refer :
http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/ch15s05s02.html
for more details about command line scheduling

Install Financial Reporting and Analysis

Hi All,
I have a Classic Planning Application on EPM 11.1.1.1.0
I have hyperion installed in a distributed env..(on three boxes..one running windows xp(machine 1), two running windows server 2003(machine 2 and machine 3.)
Machine 2 has ...Essbase Server and Oracle.
Machine 3 has ...Hyperion Planning,Workspace.
Machine 1 has ...EPMA and Calc Mgr.
Now i need to install Financial Reporting and analysis..
Can somebody please guide me as to which box should i go about installing it..?
Regards.
Alicia
Edited by: Alicia on Aug 27, 2009 11:34 PM

Hello John...
let em describe my config
I have a UNIX box and a windows server 2003 box. Now EPMA and calc manager must be installed on Windows
so that part is fixed ...
And on the Unix machine i am going to install sharedservice, essbase,eas,planning
now if i want to install reporting ,then on which machine i should do it?
Unix Box
Shared Services
Essbase Server
EAS
HP
PS
Workspace
Windows Server Box
EPMA
Calc Man
Int Rep
Finan Rep
SQR Rep
Web Analysis
FDM
Windows Box
EPMA and CALC
mgr
I am using EPM sytem 11.
Thanks

Financial Reports and Essbase Dimenisons

Hi,
I am new to Hyperion. We are working on static reports using Financial Reports. Currently we have 122 static reports.
But now the application requires adding new dimension to the Essbase schema. Will adding new dimensions affect all the existing reports? I mean will it require to redevelop all the reports? It will be a great amount of work and downtime will affect our production.
Will appreciate help on this.
Thanks,
KK

But now the application requires adding new dimension
to the Essbase schema. Will adding new dimensions
affect all the existing reports?I don't use the Hyperion Reports product but have used Essbase for about 12 years. Anytime you add a dimension to an Essbase database, you will have work to do on the reporting side as Essbase essentially stores data at the 'intersection' of a member from each dimension in the database. At the least, you will have to add the dimension member to the report.
There is, however, one exception to the rule and that is if the dimension you add is an 'attribute' dimension. Attribute dimensions are treated as 'optional' dimensions for reporting and thus, if the dimension you added is an attribute dimension, you should not have to modify your reports.
Tim Tow
Oracle ACE
Applied OLAP, Inc

How to get prompt value in Financial Reporting and use it as header

Hi Oracle Gurus,
I have Hyperion Financial Reporting 11.1.1.3. I created a report.
I have Products dimension on rows. And I also have prompt for Products.
Let's say there is 3 products, Product A, B, and C, with each has its own level 0 item (for example A1, A2, B1, C1)
Currently in my situation, user will be prompted to select a list of Products, and then the report will display only the level 0 of the product chosen by the user. For example, user select Product A, then the report (or the grid) will display A1 and A2 on rows. User select Product B, B1 will be displayed.
My question is, I want to create a dynamic header report, so how can I get this prompt value and use it as a report header? For example: Sales of Product A when user choose Product A, or Sales of Product B when user choose Product B.
Thanks a lot for your response.

Hi,
Here is the possible way to achieve it:
1. Insert a row (may be as row 1) in the report which has product as "User prompt".
2. mark this row as hidden always
3. User other rows as level0 of product in row 1
4. Use MEMBERALIAS in your header to use product as dimension & row as row1
Hope it helps !!
Edited by: user8628169 on Jun 22, 2011 10:53 AM

Financial Reporting and Microsoft OLAP - issues with MDX

We have installed Oracle/Hyperion Financial Reporting 11 for a client. They are using a Microsoft Analysis Services 2000 'cube' as the data source. The cube has an Account Dimension with 9 levels in its hierarchy. We have found Financial Reporting truncates the MDX when querying Accounts at the lowest level (around 100 characters in the length of the MDX string) or when querying multiple account groups at a higher level (and displaying descendants). Does anyone have any workarounds or solutions? Is there a better way of doing things? Is there any documentaion on the limitations of using FR over MSOLAP? We have have built the cube with an Account No as the Short Name (Key) and the Account Description as the Name but FR insists on only displaying (and using in the MDX) the long Account Descriiption - whereas using Essabase you can drill down on the Member Names [Account No] but display the Alias [Account Name]

Hi,
I don’t found the similar issue, please confirm your hardware compliant with the server 2012, update your BIOS at last release.
Please rerun the validation test then post the error or warning part, that report will quickly locate the issue.
Please try to install the recommended hotfixes and updates for Windows Server 2012-based failover clusters then try again.
Recommended hotfixes and updates for Windows Server 2012-based failover clusters
http://support.microsoft.com/kb/2784261/en-us
More information:
Windows Server Catalog
http://www.windowsservercatalog.com/default.aspx
Hyper-V Virtual Fibre Channel Overview
http://technet.microsoft.com/en-us/library/hh831413.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyperion Financial Reporting and Cognos Reporting

Dear All,
Kindly assist in providing the clear differences between the above tools?
Can we have the Hyperion implemented and run reports using Cognos? or is there any integration facility available to interlink with Hyperion Financial Reporting?
Thanks
Swami

Neville,
Page 48 of this link
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
JTS

Financial Reports and Transaction Code Selection Criteria

When running a financial report, e.g. Trial Balance, it is possible to filter the results by Transaction Code. by clicking on the Expanded button
So, when the Expanded button is selected, and values are selected in the Trans Code drop-down boxes, the report is run for a specific (range of) Transaction Codes.
When the Expanded button is selected, but no values are selected in the Trans Code drop-down boxes, the report is run for ALL transaction codes
This is exactly the same result as not selecting the Expanded button and seems totally pointless !
The reports should work such that if the Expanded button is selected and no values are selected in the Trans Code drop-down boxes, the report is run for Journals which have no Transaction Code.
At present, there is NO option to run a financial report for journals which have no Transaction Code, yet there are TWO options to run a report for all Transaction Codes

Thanks, Andy. My problem was that I was thinking that if a dimension was placed in a Column (which is what I needed), it couldn't also be in the POV. Well, I guess that is true, but if you put it in the Column (in this case Month) the user will still be able to change it using the POV.
So, I put Month in the column and for subsequent columns I used the "Relative Member" selection type to navigate up or down the hierarchy to select the appropriate member I needed.
Thanks.

Financial Reporting and Workspace 11.x

Hey,
I am new to Financial Reporting. I know that we can not create new Hyperion Financial Reporting reports in Workspace till version 9.x.
Is it possible to create FR reports in Workspace in Version 11.x? Any particular process to follow?
Thanks,
Edited by: user8118386 on Sep 27, 2009 11:00 AM
Edited by: user8118386 on Sep 27, 2009 3:27 PM

Hi,
You still need to create reports in the Reporting Studio client in version 11.
Cheers
John
http://john-goodwin.blogspot.com/

Financial Reports and LCM 11.1.1.3

Hi,
Trying to migrate reports from DEV to PROD. I export the xml file from LCM on PROD via 'Application Groups'->'Reporting and Analysis'->'Repository Objects'->'Reports'. Then on the target system I run the 'File System' to bring them in. However I can't run them on the target system. So I goto change the 'Database Connection' on each report to the current environments conntection 'DEV'. Problem is the drop down is not giving me the original connection from PROD to change it to.
Am I missing something on how to migrate Fin Reports using LCM? Perhaps I need to extract additional artifacts under Reporting and Analysis??

I agree with John. You need to creata the database connections in the target environment. If it still fails, I would also give it a shot to the good old fashioned import export option. If you have exactly the same folder structure and naming conventions between your environments then try this:
- In your source env, login to Workspace, click on Explore > File > Export > Select the report folder. Workspace creates a zip file. Save it on your computer. Doesn't matter where.
- Go to your target env, login to Workspace, click on Explpre > File > Import > Select the zip file.
You will probably get a pop-up asking for the database connection. Select the one you created on your target env, and it will apply to all of the reports. Disadvantages:
- Very manual
- You can't automate it like you can on LCM.
Cheers,
Mehmet

Financial Reports and Prompts

I want to prompt a user for a Month; however, I don't want to show only the Month's data on the report...I want to the Month chose, the Previous Month's data, QTD of that Month and YTD of that Month.
What is the best way to accomodate for this? Can I make a selection from the prompt like this (Month) but show 4 variations of this in 4 different columns. I thought that maybe I could prompt for the Month and put it in ColumnA and then somehow reference that for Column B (Previous Month as a selection using the offset), etc... I'm just not sure how to pass the selected Month into the other 3 columns, each using a different selection type with that Month.
Thanks.

Thanks, Andy. My problem was that I was thinking that if a dimension was placed in a Column (which is what I needed), it couldn't also be in the POV. Well, I guess that is true, but if you put it in the Column (in this case Month) the user will still be able to change it using the POV.
So, I put Month in the column and for subsequent columns I used the "Relative Member" selection type to navigate up or down the hierarchy to select the appropriate member I needed.
Thanks.

Importing FR reports and deleting dims

We recently created another application and with a fewer dimensions.
We have a bunch of FR reports which I are needed to be imported.
My question:
Is there a way to delete certain dimensions from the reports before opening the reports in new application.
And keep everything else the same?
I am trying to avoid doing the reports all over again which will take significant amount of time.

Are the deleted dimensions in POV?
Then you can create a new database connection with the new App:DB in Workspace.
in .des file check for <POV> under that header there will be
<DIMENSION DISABLED="0" HIDDEN="0" NAME="Scenario">
<METADATAEXPRESSION VALUE="<?xml version="1.0" encoding="UTF-8"?><COMPOSITEOPERATION TYPE="MemberQuery"><OPERATION TYPE="Select"><MULTIVALUE><STRING>Name</STRING></MULTIVALUE><STRING>Scenario</STRING></OPERATION><COMPOSITEOPERATION TYPE="Filter"><OPERATION TYPE="Member"><STRING>User Point of View for Scenario</STRING><STRING>Scenario</STRING></OPERATION></COMPOSITEOPERATION></COMPOSITEOPERATION>"/>
</DIMENSION>So in this case if you deleted Scenario, then remove this portion from the file, save the file, import it and change the database connection to the new one.
If the dimension is in ROW or Column or Page then the process is too complicated.
Regards
Celvin
http://www.orahyplabs.com
Please mark the responses as helpful/correct if applicable

Financial Reporting and substitution variable

Hello,
i have a problem with FR and substitution variable. I create the substitution variable in Essbase for example antYear but i dont'see in dimension layout in FR studio and workspace.
Thanks.

You'll need to restart FR studio, after you have created the substitution variables. As the studio only performs one read of the sub var database on startup.
It also won't show up unless you assign a member to it.
Hope this helps.
Iain

Financial Reports and Attribute Dims

Similar Messages

Maybe you are looking for