Financial service extention set is not active

hi expert,
I try to execute  t-code tm01 but error message pop-up "financial service extention set is not active"
I did activate EA-FS in t-code SFW5 but EA-FS was not activated in t-code BF11.
I can`t active EA-FS in BF11 because checkbox of EA-FS is unchagealbe, even others EA * applications are unchageable in BF11.
How can I active EA * applications in BF11?
Thanks
Jun

hi all,
thanks for your reply.
I activated business function (-> yellow) FIN_TR* but error is same.
I cant still execute t-code tm01.
Anything  else?
Regards,
Jun

Similar Messages

  • Problems Shared Services:Registered application is not active at the moment

    Hi!
    I have a problem with Hyperion Shared Services (HSS) and Hyperion Performance Socrecard (HPS), my projecto from HPS appears like if not it was registered in HSS.
    The error is: Registered application is not active at the moment. Please consult your system administrator.
    The information was migrated from other server, now already run configuration utility and configurate my proyect, but not appears in HSS.
    Optional: This is necessary for assign sercurity roles by Domain?
    Thank you very much.

    Did you get this resolved .
    Vinod

  • No service....not activated ???

    I've had my iPhone since Christmas and today while driving to work, the phone said "no service". I turned the phone off and turned it back on only to see that it wanted me to connect to iTunes. Turned the phone off and back on and I then saw I had service. After just a few minutes, "no service" again. After multiple shut downs and turn ups, I've seen that I've had service only to last just a few minutes, seen that my phone is not activated and then activated and no service.
    Is there some known issue that causes the phone to think its no activated? It's been working fine and have no idea why it started all of a sudden.
    Thanks in advance
    David

    Hi David,
    You can try toggling Airplane Mode in the Settings menu. This would force the iPhone to disconnect and reconnect to the cellular network.
    Try contacting AT&T, there may be a service issue in your area.
    http://www.wireless.att.com/about/contact-us/contact-us-phone.jsp
    Customer Support: 1-800-331-0500
    -Jason

  • Ipad retina screen stuck on "Not Enough Storage" error on screen and option to close or go to setting is not active

    Ipad retina screen stuck on "Not Enough Storage" error on screen and option to close or go to setting is not active

    You could reboot your device by pressing the home button + power button at the same time for about 10 sec. until it shuts down and restarts again.

  • Extention set EA-FIN activated rules out the use of FEBA transaction

    Hi all,
    When Extension set EA-FIN is activated you can no longer call up the standard Bank Statement Processing (FEBA), instead FEBAN is called. 
    Does anybody know a way to still call FEBA after EA-FIN is activated or provide some insight into why FEBA does now call FEBAN.
    Cheers,
    Gudmundur

    Hi Gudmundur,
    After eytension has been switched on, the coding of FEBA executes in a different way. Coding has obviously been prepared to do so since Rel 4.7. It checks for the activated extension and jumps to FEBAN. That's it, you do not even get a message about that ...
    There is one message you can switch on, to force FEBA to still be FEBA even though extension has been activated:
    Maintain table views for messages: SM30
    View: V_T100C
    Application Area: NEW_FEBA
    Message 001 for FEBA instead of FEBAN
    Message 002 for FLB1 instead of FEBAN
    FEBA will stay FEBA but issue an information to the user. That's it. If you want to, you can certainly start FEBAN at any time you want to ...
    Kind regards,
    Hartmut
    PS: As far as I saw, this has not been in the Release Notes for EA-FIN. Found it by debugging FEBA ...

  • HT5457 i did update my i phone 3gs to lattest ios but now it is not  activating. simcard in not working and set is not activating

    i want to know the reasone.. why it is not supporting du or etisalat simcard

    Downgrading the iOS is not supported by Apple.
    Try:
    Re: What does the gray dotted circle in iTunes mean?
    https://discussions.apple.com/thread/4676111?tstart=0\\
    Dotted circles next to songs, won't sync, red circle with square?

  • Side B PGs Not Active

    Hi all, we have a customer with UCCE 8.0.2, we are facing an issue that at Side-B Router Ccagnet process it shows "inservice" status but doesn't show any PG out of 3 configured and when we check the CCM PG and VRUPG  status it shows "Not Active". Every machine can ping each other and DNS is resolving the machine names as well while Side-A is working perfect. Attache is the screen shot of "ccagent" process.

    The information you provided is pretty limited, but I'm going to make a guess anyway : your private network between the PGs is down.
    I believe that's the case because :
    The A side is working correctly as per what you stated
    Still the B side MDS is In Service
    PG Agent is Not Active on the B side but still your Router's CC Agent seems to be rejecting a PG Agent at 10.30.30.13, I'm going to assume that's your PG B's public IP ?
    I.e. the only reason PG B would try to register as the active pgag to ccag would be because it doesn't know that the A side is up and running.
    If you provide some creenshots of the following processes that should shed more light on the situation :
    ccag on both Router ends
    mdsproc on both PG ends
    pgag on both PG end
    Cheers,
    Kris

  • Error : ICMAN not Active

    When i try to test a HTTP service it says ICMAN not Active. I am trying to upload a photo of an employee, thru transaction OAAD it says 'HTTP Plugin not Active'

    Hi, Test your content repository server using TC - SICF also check its up and running using TC: CSADMIN.
    (you might require basis help for this)

  • I have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    Unless you subscribe to iTunes Match, iCloud doesn't sync music.  Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated.  Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID.  You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
    You'll also want to use separate IDs for each person for iMessage and FaceTime.  This will keep your text messages and FaceTime called separated as well.  The easiest way to do this is to have everyone use their iCloud ID for these two services as well.

  • "No active userstore is set": portal not started.

    Hi,
    I put ABAP and Java together and this morning when I restart j2ee, I found server stated but dispatcher is not.
    when I go to http://hostname:50000/irj/portal I got error
    503   Service Unavailable
      7.00 
      Dispatcher running but no server connected!
      Details:   No details available
    then I check the log file std_server0.out file and find following logs.
    I feel the problem is no active userstore is set. and I did check config tool regarding
    the com.sap.engine.services.security and 1. I did not change anything there before, 2. I restore the default setting which does not make any changes.
    what do I need to check or get this fixed?
    George
    details of std_server0.out:
    stdout/stderr redirect
    node name   : server0
    pid         : 2136
    system name : BWD
    system nr.  : 00
    started at  : Fri Dec 26 13:52:42 2008
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    [Thr 4788] MtxInit: 10001 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: 文件名、目录名或卷标语法不正确。
    Loading: LogManager ... 2656 ms.
    Loading: PoolManager ... 31 ms.
    Loading: ApplicationThreadManager ... 250 ms.
    Loading: ThreadManager ... 31 ms.
    Loading: IpVerificationManager ... 16 ms.
    Loading: ClassLoaderManager ... 15 ms.
    Loading: ClusterManager ... 719 ms.
    Loading: LockingManager ... 141 ms.
    Loading: ConfigurationManager ... 4062 ms.
    Loading: LicensingManager ... 47 ms.
    Loading: CacheManager ... 188 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service DQE started. (16 ms).
      Service memory started. (78 ms).
      Service cafeuodi~mnuacc started. (0 ms).
      Service timeout started. (110 ms).
      Service cross started. (156 ms).
      Service runtimeinfo started. (15 ms).
      Service file started. (187 ms).
      Service trex.service started. (172 ms).
      Service p4 started. (485 ms).
      Service classpath_resolver started. (47 ms).
      Service cafeucc~api started. (1485 ms).
      Service userstore started. (15 ms).
      Service jmx_notification started. (93 ms).
      Service log_configurator started. (7968 ms).
      Service locking started. (16 ms).
      Service naming started. (391 ms).
      Service ts started. (62 ms).
      Service failover started. (172 ms).
      Service licensing started. (47 ms).
      Service appclient started. (157 ms).
      Service javamail started. (250 ms).
      Service jmsconnector started. (281 ms).
      Service connector started. (297 ms).
      Service iiop started. (468 ms).
      Service http started. (938 ms).
      Service webservices started. (1016 ms).
      Service deploy started. (24156 ms).
      Service configuration started. (47 ms).
      Service MigrationService started. (32 ms).
      Service bimmrdeployer started. (15 ms).
      Service dbpool started. (1328 ms).
      Service cafeugpmailcf started. (47 ms).
      Service com.sap.security.core.ume.service started. (4704 ms).
    Dec 26, 2008 1:53:36 PM  ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_24] Fatal: Can not instantiate UserContext with given properties.
      service security ================= ERROR =================
    Core service security failed. J2EE Engine cannot be started.
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Dec 26, 2008 1:53:36 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_24] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
    stdout/stderr redirect
    node name   : server0
    pid         : 2136
    system name : BWD
    system nr.  : 00
    started at  : Fri Dec 26 13:53:37 2008
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    [Thr 6844] MtxInit: 10001 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: 文件名、目录名或卷标语法不正确。
    Loading: LogManager ... 391 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 109 ms.
    Loading: ThreadManager ... 32 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 15 ms.
    Loading: ClusterManager ... 203 ms.
    Loading: LockingManager ... 63 ms.
    Loading: ConfigurationManager ... 2375 ms.
    Loading: LicensingManager ... 31 ms.
    Loading: CacheManager ... 219 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service DQE started. (0 ms).
      Service memory started. (32 ms).
      Service cafeuodi~mnuacc started. (0 ms).
      Service cross started. (16 ms).
      Service file started. (78 ms).
      service appclient ================= ERROR =================
      Service runtimeinfo started. (63 ms).
      Service timeout started. (125 ms).
      Service cafeucc~api started. (46 ms).
      Service trex.service started. (141 ms).
      Service userstore started. (31 ms).
      Service jmx_notification started. (47 ms).
      Service p4 started. (219 ms).
      Service classpath_resolver started. (31 ms).
      Service log_configurator started. (8906 ms).
      Service locking started. (16 ms).
      Service naming started. (500 ms).
      Service http started. (688 ms).
      Service failover started. (156 ms).
      Service javamail started. (250 ms).
      Service jmsconnector started. (250 ms).
      Service ts started. (218 ms).
      Service licensing started. (0 ms).
      Service connector started. (281 ms).
      Service iiop started. (203 ms).
      Service webservices started. (578 ms).
      Service deploy started. (22171 ms).
      Service MigrationService started. (93 ms).
      Service bimmrdeployer started. (31 ms).
      Service configuration started. (109 ms).
      Service dbpool started. (3703 ms).
      Service cafeugpmailcf started. (63 ms).
      Service com.sap.security.core.ume.service started. (2453 ms).
    Dec 26, 2008 1:54:16 PM  ...xt.<init>(UserContextSpi, Properties) [Session Reader for cluster node 3388400] Fatal: Can not instantiate UserContext with given properties.
      service security ================= ERROR =================
    Core service security failed. J2EE Engine cannot be started.
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Dec 26, 2008 1:54:16 PM             com.sap.engine.core.Framework [Session Reader for cluster node 3388400] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
    stdout/stderr redirect
    node name   : server0
    pid         : 2136
    system name : BWD
    system nr.  : 00
    started at  : Fri Dec 26 13:54:17 2008
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    [Thr 5464] MtxInit: 10001 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: 文件名、目录名或卷标语法不正确。
    Loading: LogManager ... 391 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 78 ms.
    Loading: ThreadManager ... 63 ms.
    Loading: IpVerificationManager ... 15 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 172 ms.
    Loading: LockingManager ... 62 ms.
    Loading: ConfigurationManager ... 1828 ms.
    Loading: LicensingManager ... 32 ms.
    Loading: CacheManager ... 125 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service DQE started. (0 ms).
      Service cafeuodi~mnuacc started. (0 ms).
      Service cross started. (31 ms).
      Service memory started. (63 ms).
      Service file started. (203 ms).
      Service runtimeinfo started. (47 ms).
      Service cafeucc~api started. (47 ms).
      Service timeout started. (187 ms).
      Service trex.service started. (125 ms).
      Service userstore started. (31 ms).
      Service jmx_notification started. (31 ms).
      Service p4 started. (188 ms).
      Service classpath_resolver started. (31 ms).
      Service log_configurator started. (7141 ms).
      Service locking started. (0 ms).
      Service naming started. (296 ms).
      Service failover started. (125 ms).
      Service appclient started. (125 ms).
      Service http started. (531 ms).
      Service jmsconnector started. (203 ms).
      Service javamail started. (266 ms).
      Service ts started. (187 ms).
      Service licensing started. (15 ms).
      Service connector started. (297 ms).
      Service iiop started. (359 ms).
      Service webservices started. (578 ms).
      Service deploy started. (17484 ms).
      Service MigrationService started. (46 ms).
      Service bimmrdeployer started. (31 ms).
      Service configuration started. (47 ms).
      Service dbpool started. (1125 ms).
      Service cafeugpmailcf started. (47 ms).
      Service com.sap.security.core.ume.service started. (2047 ms).
    Dec 26, 2008 1:54:47 PM  ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_30] Fatal: Can not instantiate UserContext with given properties.
      service security ================= ERROR =================
    Core service security failed. J2EE Engine cannot be started.
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Dec 26, 2008 1:54:47 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_30] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
    stdout/stderr redirect
    node name   : server0
    pid         : 2136
    system name : BWD
    system nr.  : 00
    started at  : Fri Dec 26 13:54:48 2008
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    [Thr 8012] MtxInit: 10001 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: 文件名、目录名或卷标语法不正确。
    Loading: LogManager ... 375 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 110 ms.
    Loading: ThreadManager ... 31 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 218 ms.
    Loading: LockingManager ... 63 ms.
    Loading: ConfigurationManager ... 2297 ms.
    Loading: LicensingManager ... 31 ms.
    Loading: CacheManager ... 187 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service DQE started. (0 ms).
      Service cafeuodi~mnuacc started. (0 ms).
      Service memory started. (32 ms).
      service CUL ================= ERROR =================
      Service cross started. (16 ms).
      Service file started. (63 ms).
      service apptracing ================= ERROR =================
      Service timeout started. (47 ms).
      Service cafeucc~api started. (47 ms).
      Service runtimeinfo started. (16 ms).
      Service trex.service started. (110 ms).
      Service userstore started. (62 ms).
      Service jmx_notification started. (32 ms).
      Service p4 started. (297 ms).
      Service classpath_resolver started. (15 ms).
      Service log_configurator started. (8828 ms).
      Service locking started. (16 ms).
      Service naming started. (422 ms).
      Service failover started. (125 ms).
      Service appclient started. (157 ms).
      Service javamail started. (219 ms).
      Service ts started. (203 ms).
      Service jmsconnector started. (282 ms).
      Service licensing started. (16 ms).
      Service http started. (781 ms).
      Service connector started. (265 ms).
      Service iiop started. (312 ms).
      Service webservices started. (625 ms).
      Service deploy started. (21609 ms).
      Service MigrationService started. (93 ms).
      Service bimmrdeployer started. (31 ms).
      Service configuration started. (78 ms).
      Service dbpool started. (3594 ms).
      Service cafeugpmailcf started. (47 ms).
      Service com.sap.security.core.ume.service started. (2500 ms).
    Dec 26, 2008 1:55:26 PM  ...xt.<init>(UserContextSpi, Properties) [Session Reader for cluster node 3388400] Fatal: Can not instantiate UserContext with given properties.
      service security ================= ERROR =================
    Core service security failed. J2EE Engine cannot be started.
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:179)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:402)
         at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:81)
         at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:57)
         at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
         ... 5 more
    [Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
    Dec 26, 2008 1:55:26 PM             com.sap.engine.core.Framework [Session Reader for cluster node 3388400] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.

    Deb,
    you are right in ST22.
    no SAPJSF in SM04 however in ST22
    I see short dump below:
    Runtime Errors         DYNPRO_SEND_IN_BACKGROUND
    Exception              CX_SY_SEND_DYNPRO_NO_RECEIVER
    Date and Time          26.12.2008 13:15:57
    Short text                                                                               
    Screen output without connection to user.                                                    
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLARFC" had to be terminated because it has                      
        come across a statement that unfortunately cannot be executed.                               
    What can you do?                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                       
        administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                  
        at and manage termination messages, and you can also                                         
        keep them for a long time.                                                                   
    Error analysis                                                                               
    An exception occurred that is explained in detail below.                                     
        The exception, which is assigned to class 'CX_SY_SEND_DYNPRO_NO_RECEIVER', was               
         not caught and                                                                               
    therefore caused a runtime error.                                                            
        The reason for the exception is:                                                             
        During background processing, the system attempted to send a                                 
        screen to a user.                                                                               
    Current screen: "SAPMSYST " 0029.                                                            
    How to correct the error                                                                         
        If the error occurred in your own ABAP program or in an SAP                                  
        program you modified, try to remove the error.                                                                               
    If the error occures in a non-modified SAP program, you may be able to                       
        find an interim solution in an SAP Note.                                                     
        If you have access to SAP Notes, carry out a search with the following                       
        keywords:                                                                               
    "DYNPRO_SEND_IN_BACKGROUND" "CX_SY_SEND_DYNPRO_NO_RECEIVER"                                  
        "SAPLARFC" or "LARFCU05"                                                                     
        "ARFC_DEST_CONFIRM"                                                                               
    If you cannot solve the problem yourself and want to send an error                           
        notification to SAP, include the following information:                                                                               
    1. The description of the current problem (short dump)                                                                               
    To save the description, choose "System->List->Save->Local File                           
        (Unconverted)".                                                                               
    2. Corresponding system log                                                                               
    Display the system log by calling transaction SM21.                                       
           Restrict the time interval to 10 minutes before and five minutes                          
        after the short dump. Then choose "System->List->Save->Local File                            
        (Unconverted)".                                                                               
    3. If the problem occurs in a problem of your own or a modified SAP                          
        program: The source code of the program                                                      
           In the editor, choose "Utilities->More                                                    
        Utilities->Upload/Download->Download".                                                                               
    4. Details about the conditions under which the error occurred or which                      
        actions and input led to the error.                                                                               
    System environment                                                                               
    SAP-Release 700                                                                               
    Application server... "bwdev"                                                                
        Network address...... "10.0.16.123"                                                          
        Operating system..... "Windows NT"                                                           
        Release.............. "5.2"                                                                  
        Hardware type........ "4x Intel 80686"                                                       
        Character length.... 8 Bits                                                                  
        Pointer length....... 32 Bits                                                                
        Work process number.. 0                                                                      
        Shortdump setting.... "full"                                                                               
    Database server... "BWDEV\BWD"                                                               
        Database type..... "MSSQL"                                                                   
        Database name..... "BWD"                                                                     
        Database user ID.. "bwd"                                                                               
    Terminal................. "mfc"                                                                               
    Char.set.... "Chinese_CHN.936"                                                                               
    SAP kernel....... 700                                                                        
        created (date)... "Aug 25 2008 01:11:49"                                                     
        create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"                             
        Database version. "SQL_Server_8.00 "                                                                               
    Patch level. 175                                                                               
    Patch text.. " "                                                                               
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"                             
        SAP database version. 700                                                                    
        Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows               
         NT 6.0"                                                                               
    Memory consumption                                                                               
    Roll.... 8112                                                                               
    EM...... 1045296                                                                               
    Heap.... 0                                                                               
    Page.... 0                                                                               
    MM Used. 730304                                                                               
    MM Free. 313656                                                                               
    User and Transaction                                                                               
    Client.............. 000                                                                     
        User................ "SAPSYS"                                                                
        Language Key........ 1                                                                       
        Transaction......... " "                                                                     
        Transactions ID..... "110CD3DD8838F154B57A000C29233B12"                                                                               
    Program............. "SAPLARFC"                                                              
        Screen.............. "SAPMSSY1 3004"                                                         
        Screen Line......... 2                                                                               
    Information on caller of Remote Function Call (RFC):                                         
        System.............. "LJQ"                                                                   
        Database Release.... 640                                                                     
        Kernel Release...... 640                                                                     
        Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)                           
        Call Type........... "synchron and transactional (emode 0, imode 0)"                         
        Inbound TID.........." "                                                                     
        Inbound Queue Name..." "                                                                     
        Outbound TID........." "                                                                     
        Outbound Queue Name.." "                                                                               
    Client.............. 500                                                                     
        User................ "TEST1"                                                                 
        Transaction......... " "                                                                     
        Call Program........."SAPLARFC"                                                              
        Function Module..... "ARFC_DEST_CONFIRM"                                                     
        Call Destination.... "000CLT"                                                                
        Source Server....... "sapljq_LJQ_00"                                                         
        Source IP Address... "10.0.16.5"                                                                               
    Additional information on RFC logon:                                                         
        Trusted Relationship " "                                                                     
        Logon Return Code... 53                                                                      
        Trusted Return Code. 0                                                                               
    Note: For releases < 4.0, information on the RFC caller are often                            
        only partially available.                                                                    
    Information on where terminated                                                                  
        Termination occurred in the ABAP program "SAPLARFC" - in "ARFC_DEST_CONFIRM".                
        The main program was "SAPMSSY1 ".                                                                               
    In the source code you have the termination point in line 1                                  
        of the (Include) program "LARFCU05".                                                         
    Source Code Extract                                                                               
    Line SourceCde                                                                               
    >>>>>FUNCTION arfc_dest_confirm.                                                                
        2*"----
        3""Lokale Schnittstelle:                                                                  
        4*"  IMPORTING                                                                               
    5*"     VALUE(CALLID) LIKE  ARFCCALLID STRUCTURE  ARFCCALLID                                
        6*"     VALUE(ERRORSTATUS) LIKE  SY-SUBRC DEFAULT 0                                         
        7*"     VALUE(RETUDATA) LIKE  SY-INPUT DEFAULT SPACE                                        
        8*"     VALUE(RS_SERVER_RESOURCES_REQUESTED) TYPE  SYINPUT OPTIONAL                         
        9*"     VALUE(RS_SYSTEM_IDENTITY_REQUESTED) TYPE  RFC_IDENTITY_REQUESTED                    
       10*"       OPTIONAL                                                                          
       11*"     VALUE(RS_SERVER_GROUP_TYPE) TYPE  RFC_RESOURCE_GROUP_TYPE                           
       12*"       OPTIONAL                                                                          
       13*"     VALUE(RS_SERVER_GROUP_NAME) TYPE  RFC_RESOURCE_GROUP_NAME                           
       14*"       OPTIONAL                                                                          
       15*"     VALUE(RS_SERVER_GROUP_TRACE) TYPE  I OPTIONAL                                       
       16*"  EXPORTING                                                                               
    17*"     VALUE(HOLD_DELETE) LIKE  SY-INPUT                                                   
       18*"     VALUE(RS_SYSTEM_IDENTITY) TYPE  RFC_SYSTEM_IDENTITY                                 
       19*"     VALUE(RS_SERVER_RESOURCES_RC) TYPE  SYSUBRC                                         
       20*"  TABLES                                                                               
    Contents of system fields                                                                        
    Name    Val.                                                                               
    SY-SUBRC0                                                                               
    SY-INDEX1                                                                               
    SY-TABIX1                                                                               
    SY-DBCNT1                                                                               
    SY-FDPOS40                                                                               
    SY-LSIND0                                                                               
    SY-PAGNO0                                                                               
    SY-LINNO1                                                                               
    SY-COLNO1                                                                               
    SY-PFKEY                                                                               
    SY-UCOMM                                                                               
    SY-TITLECPIC 和 RFC控制                                                                         
    SY-MSGTY                                                                               
    SY-MSGID                                                                               
    SY-MSGNO000                                                                               
    SY-MSGV1                                                                               
    SY-MSGV2                                                                               
    SY-MSGV3                                                                               
    SY-MSGV4                                                                               
    SY-MODNO0                                                                               
    SY-DATUM20081226                                                                               
    SY-UZEIT131556                                                                               
    SY-XPROGSAPCNVE                                                                               
    SY-XFORMCONVERSION_EXIT                                                                         
    Active Calls/Events                                                                               
    No.   Ty.          Program                             Include                             Line  
          Name                                                                               
        4 FUNCTION     SAPLARFC                            LARFCU05                                1 
          ARFC_DEST_CONFIRM                                                                               
    3 FORM         SAPLARFC                            LARFCU05                                1 
          ARFC_DEST_CONFIRM                                                                               
    2 FORM         SAPMSSY1                            SAPMSSY1                               85 
          REMOTE_FUNCTION_CALL                                                                       
        1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30 
          %_RFC_START                                                                               
    Chosen variables                                                                               
    Name                                                                               
    Val.                                                                               
    No.       4 Ty.          FUNCTION                                                                
    Name  ARFC_DEST_CONFIRM                                                                          
    CALLID                                                                               
    0A0010051758495467BF3459000CLT                          00000001                             
        3433333333333333334433333334452222222222222222222222222233333333                             
        0100100517584954672634590003C40000000000000000000000000000000001                             
    ERRORSTATUS                                                                               
    1                                                                               
    0000                                                                               
    1000                                                                               
    RETUDATA                                                                               
    2                                                                               
    0                                                                               
    RS_SERVER_GROUP_NAME                                                                               
    22222222222222222222                                                                         
        00000000000000000000                                                                         
    RS_SERVER_GROUP_TRACE                                                                               
    0                                                                               
    0000                                                                               
    0000                                                                               
    RS_SERVER_GROUP_TYPE                                                                               
    2                                                                               
    0                                                                               
    RS_SERVER_RESOURCES_REQUESTED                                                                               
    2                                                                               
    0                                                                               
    RS_SYSTEM_IDENTITY_REQUESTED                                                                               
    2                                                                               
    0                                                                               
    HOLD_DELETE                                                                               
    2                                                                               
    0                                                                               
    RS_SERVER_RESOURCES_RC                                                                               
    0                                                                               
    0000                                                                               
    0000                                                                               
    RS_SYSTEM_IDENTITY                                                                               
    2222222222222222222222222222222222222222                                                     
        0000000000000000000000000000000000000000                                                     
    RS_SERVER_GROUP_RESOURCES[]                                                                      
        Table[initial]                                                                               
    OPCODE_TX_ABORT                                                                               
    2                                                                               
    A                                                                               
    <%_TABLE_ARFCRSTATE>                                                                               
    VB_V2_SERVER                                                                               
    0                                                                               
    2                                                                               
    DSTATE                                                                               
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
        0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    VB_V1_RESTART_CONTINUE                                                                               
    0                                                                               
    C                                                                               
    RFC_RFCDES                                                                               
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
        0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    VB_ARFC_FB                                                                               
    4                                                                               
    3                                                                               
    4                                                                               
    VB_V2_AUTO_SYS_CONTINUE                                                                               
    1                                                                               
    7                                                                               
    %_TIME_QINBATCH                                                                               
    003000                                                                               
    333333                                                                               
    003000                                                                               
    COL_DELETE                                                                               
    2                                                                               
    0                                                                               
    TH_VMC_PROF_ROLLTRACE_ENABLE                                                                     
        10                                                                               
    0000                                                                               
    A000                                                                               
    SYST-REPID                                                                               
    SAPLARFC                                                                               
    5454454422222222222222222222222222222222                                                     
        310C126300000000000000000000000000000000                                                     
    VB_REORG                                                                               
    1                                                                               
    3                                                                               
    No.       3 Ty.          FORM                                                                    
    Name  ARFC_DEST_CONFIRM                                                                          
    VB_ARFC_DELETE                                                                               
    2                                                                               
    3                                                                               
    2                                                                               
    TH_UNREG_PARAMETER                                                                               
    %UNREG%                                                                               
    25454422                                                                               
    55E25750                                                                               
    SET_USR_MANDT                                                                               
    0                                                                               
    4                                                                               
    OPCODE_CPIC_LOGIN                                                                               
    1                                                                               
    2                                                                               
    %_%_CALLID                                                                               
    0A0010051758495467BF3459000CLT                          00000001                             
        3433333333333333334433333334452222222222222222222222222233333333                             
        0100100517584954672634590003C40000000000000000000000000000000001                             
    OPCODE_ASYNC_RECEIVE                                                                               
    1                                                                               
    3                                                                               
    %_%_ERRORSTATUS                                                                               
    1                                                                               
    0000                                                                               
    1000                                                                               
    OPCODE_USR_DEL                                                                               
    1                                                                               
    4                                                                               
    %_%_RETUDATA                                                                               
    2                                                                               
    0                                                                               
    OPCODE_DELETE_MODE                                                                               
    1                                                                               
    8                                                                               
    %_%_RS_SERVER_GROUP_NAME                                                                               
    22222222222222222222                                                                         
        00000000000000000000                                                                         
    OPCODE_DELETE_USR                                                                               
    1                                                                               
    9                                                                               
    %_%_RS_SERVER_GROUP_TRACE                                                                        
        0                                                                               
    0000                                                                               
    0000                                                                               
    OPCODE_CREATE_MODE                                                                               
    1                                                                               
    7                                                                               
    %_%_RS_SERVER_GROUP_TYPE                                                                               
    2                                                                               
    0                                                                               
    OPCODE_USR_RECONNECT                                                                               
    1                                                                               
    5                                                                               
    %_%_RS_SERVER_RESOURCES_REQUESTED                                                                               
    2                                                                               
    0                                                                               
    OPCODE_INVALIDATE_CUA                                                                               
    1                                                                               
    6                                                                               
    %_%_RS_SYSTEM_IDENTITY_REQUESTED                                                                               
    2                   

  • How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , a white window appears .

    How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , the window appears white .

    By default Firefox opens a blank page for a new Tab, there is no setting to change that action without installing an add-on.
    New Tab Homepage extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/777

  • Web service transported but not active in QA environment

    Hi all,
    In order to support a template document i've created a web service using the web service tool. All is working fine in DEV and all has been successfully transported to QA environment (I think). The web service objects have been included in the transport using transaction CRMOST_TRANSPORT and I see the web service in the web service tool in QA.
    Problem is that the web service is not active. In the web service tool I see the web service and see that the Active status is still available to be selected. When I select it I get the following errors:
    - Object type does not exist
    - Not possible to get data for service object
    - Activation cannot be performed in this client:
    - Details Changes to Repository objects are not permitted in this client
    I read somewhere that you have to do 'after import functions' for web services but don't know what!? Is it simply a matter of opening the client in QA and reactivating the web service in the Web Service Tool?
    Thanks,
    Patrick

    Hi Patrick ,
    Ihave a question.
    I created a webservice through CRM 7.0 Web Service Tool
    ie we went to Component WS_DESIGN_TOOL and executed the component and we Launched the tool ,
    using tool we created a Web service for Sales Order, Due to missing of some settings I guess it didnt ask for a Transport request and it went and saved in an ' Local Object'.
    Could you please help in explaining as what steps we need to configure to make sure that the web service goes and sits in a Transport which is required in moving it to QA System.
    Regards,
    Sijo

  • Resource com.sap.aii.af.svc with type service, not active on the server

    Hi Forum,
    in my X1 server, in rwb, it gave error:
    HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://xyz:50000/AdapterFramework/rtc,
    on further analysis we find that:
    <b>  Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Application sap.com/com.sap.xi.mdt cannot be started. Reason: it has hard reference to resource com.sap.aii.af.svc with type service, which is not active on the server.</b>
    and the service/component com.sap.aii.af.svc is not present as the error says,
    In visual admin, in the services list i couldnt find this particular resource,
    pls instruct me how to deploy/start this service com.sap.aii.af.svc ,

    Hi,
    Please check out the user authorization and role and also check that you are maintaining the passwords in all places where required.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Credit Management-Sales value updated in FD32 even though credit set up is not active

    Dear Team,
    We are facing an issue where, for a sample order - sales value got updated as open sales order value against a customer in FD33.
    Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD). Since this has occurred in 2003, we have no clue what exactly has happened. We cannot locate any change logs in the configuration level.
    1) What is the possibility for credit management to be active for a document type, which was not meant for credit set up?
    2) How to remove the open order/ delivery value for the customer?
    Thanks and regards.
    Sivarajesh

    Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD).
    the above two settings  are credit checks at what level( example order level or delivery etc) you what to block the customer if the customer payer exceeds the credit limit.
    Where as if the credit active field is active in VOV7 in corresponding item category, system update the respective document values in to credit management (FD32/33) in your example open order value.
    Even though OVAK, OVAD settings are not done still system update the document values in to FD33 subject to credit active field is active in t code VOV7 .
    Please check in your item category whether credit active field active.
    thanks,
    Srinu.

  • MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file. SQLIService100 - event id 274

    window 2008 R2 server ---- after installing SQL 2008 R2 then applying sp2 / sp3 I noted a warning -
    Note this server had SQL 2008 R2 uninstalled previously.
    MS ssis service: registry setting specifying configuration file does not exist. attempting to load default configuration file.
    SQLIService100 - source
    event id- 274
    user - N/A
    Task category - service control.
    Do we need to fix something and how do we fix this warning event?
    dsk

    You could search online for this warning. I was able to find http://superuser.com/questions/346264/event-log-warning-registry-setting-specifying-configuration-file-does-not-exist
    where the fix is "in your registry, go to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTS\ServiceConfigFile
    or
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\ServiceConfigFile
    if value is empty then add in:
    C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml"
    Arthur
    MyBlog
    Twitter

Maybe you are looking for

  • Import Manager problem

    Hi All I would like to ask to help me with very strange problem, I tried to google it but no success. When I use Importa Manager (ver 7,1 SP5) to import ~ 150 records there is a problem. I choose to upload all record to create, but only one is create

  • Place spark TabBar on Bottom of ViewStacks (+ rounded corners pointing downwards)

    Why is it so hard to do such a simple thing... I figure also it must be a very common thing. <s:VGroup horizontalAlign="center" horizontalCenter="0" verticalCenter="0" gap="0">     <mx:ViewStack id="view" width="450" height="300" />     <!-- Navigato

  • Settings totally messed up after updating to 5.0 so I want to restore back to 3.6, at least for now. How?

    Using XP Pro, sp2. When using 3.6 I was able to visit websites and was often redirected by them to other pages on the site. I upgraded to 5.0 and could still reach the main pages, but now many sites are unable to redirect me to another page. For exam

  • Refurbishment with no serialisation of materials

    Hi Friends , I have one doubt regarding refurbishment process . As far as I know we can implement it in two ways : 1) with serialization of material 2) without serialization also . Without Serialization we can follow these steps : 1) Create and order

  • To compare value node

    Hi, i need to compare two value, one it comes to LeadSelection (nodePo_Items) and another comes other table (nodeTemp_GetdetailSerivce_Output), but the comparison <b>(if)</b> don't work. ex: int m = wdContext.nodeZbapi_Po_Getdetail_Input().nodeOutput