Financial Template Reports (Balance Sheet) - Auto appearance of running profit figure

Dear Experts,
I am working on SAP 9 Business One.
I have prepared a Customized Balance Sheet through the Financial Report Templates for presentation purposes. But when I run the balance sheet using the Financial Template Report, the balance sheet doesn't match.
I have found out the reason i.e. The running profit figure doesn't appear automatically.
Someone please guide me on how to bring the profit figure automatically in the Balance Sheet, prepared through the Financial Report Templates, without running a period end closing as it shows in the balance sheet run with the 'Chart of Accounts'.
Regards,
Dharmik Kara

hi Prasadbabu,
Try it out this way. Create a new line called "Total Sales" below export sales and local sales and Subtotal" check it. In case, you cannot see the active accounts defined for export sales and local sales, then create dummy titles as parent levels and create the "Total Sales" at the same level as the export sales and local sales. In the subtotal formula, you can select the two sales accounts. After the total sales sub-total, you can go ahead with the other sales accounts.
Bharath S

Similar Messages

China cashflow report/balance sheet available as Smartforms/Sapscript?

Hi Gurus,
We have EHP6. There are the following PDF Forms available for China local requirement
Cashflow report/Balance sheet/Voucher print/Ledger print
IDCN_CASHFLOW, IDCN_ACC_BAL, IDCN_ACC_DOC, IDCN_BSAIS
The issue is, we do not have ADS installed, so we are looking if these forms are
available for Sapscript or Smartforms. Are they?
Rgds
Dieter

However just to clarify
You created a multiprovider based on the virtual provider?
The use of the baldep flag is used to move debit liabilities to assets etc and it does this via a virtual cube
The virtual cube has a function module which reads the base GL cube then in memory and in abap plays aroudn with the data moving the values between FSV nodes and then throws it at the users
You cannot do this in query desginer without doing a IF statement hardcoded for every entry in the FSV (ie not practical)
the function module hanging of the virtual cube is hard coded with the cube name in the import/export parameters of the function module and the code itself has hard coded field names in it!
So my advice - try and feed the standard FIGL cube with your data - thn use the std virtual cube on top of that
Otherwise you are going to spend the next 3 months deep inside the virtual cube function module trying to copy to z version and changing all the code line by line
(he says from personal experience of trying to get this to work with a bespoke cube - I gave up!)

XL Reporter Balance Sheet UK

Hi all,
The XL Reporting Balance Sheet that we have in our business in SBO doesnt seem to do what we need it to do. Does anybody have a different version either purchased or created that they can share?
Regards,
Gerry Porter

Hi Garry,
Which part of the report you don't like?
Thanks,
Gordon

Balance sheet planning in EC-PCA - Profit center accounting

Does anybody has experience in planning balance sheet positions in EC-PCA ?
We create balance sheets by Business Unit in profit center accounting for inventory, WIP, assets and AR/AP.
Now it is the goal to use this data for the planning.
I only found a function for inventory. Does anybody know if it is generally possible to do this for all the mentioned balance sheet positions and what is the best way to go for it ?
Thanks and regards, Sebastian

Have you tried 7KEV transaction?

Pulling data Information from Financial reports- Balance Sheet

Hi,
Our users have generated Balance Sheet reports in Oracle 11.5.10 and want to know how Finished Goods data is pulled into the Balance sheet. Could anyone guide me as to how I could find this information?
Thanks in advance,
Vasu

Hi Vasu,
>How do i find out what transactions are affecting their balances and thereby affect balance sheet?
Well, as i do not have the Purchasing module, i cannot guarantee but in general you can access GL, navigate to Account/Inquiry, query the desired account and you should have a button that will let you dilldown to que transaction itself.
>In general, Purchase, sales will affect inventory. But, is there a way to see what transactions hit the inventory account ?
Use the same method.
>GL balances will only flow into Balance sheet right? So if the inventory account has any balance in GL that will only come in Balance sheet right?
All natural account balances, no matter their origin, must appers on Balance Sheet. Otherwise it will not match.
Octavio

Trial Balance, P&L and Balance sheet at plant level and profit center Level

HI Expert,
My Client has multiple plants under same company code, hence need the Trial balance, P&L and Balance sheet at plant level
Is it possible in sap to have the Plant level financial report without using the Business area concept.
Secondly each product is identified as profit center and in every transactions each transaction is corectly mapped to profit center, without using the F.5d (Transfer the BS items to Profit center) will it be possible to have the Trial balance, P&L a/c
and Balance sheet at profit center level. If possible what is the T-code which will give such reports.
Thanks & Regards
Veda Pandit
9844769403

plant is not an FI concept, you need Business Area's
any PC report should show revenue, COGS. BS items need to be transferred.

Balance sheet adjsut acct picking up profit ceter while revalaution

Hi all,
while revaluation of open items customers/vendors, Batch input session is not sucesfull as balance sheet account is picking up the profit center.As there is no assignment is to be done for BS acct and i checked the configuration its ok.
we are in 5.0 version.
very urgent help needed
Regards
Steven

Hi Stefen
As you mentioned you are Version 5.0, profit centers would be directly posted to Customers / Vendors only if you have activated "Document splitting in New GL". The line items are split and the customer / vendor are assigned Profit center.
But if you have not activated "Document splitting" then the profit center is not posted to the customer / vendor directly. It is only done in the period end with Transaction code 1KEK.
Other than this check if you have activated profit center assignment to Balance sheet accounts in Transaction code 3KEH and derivation rules in 3KEI.
Regards,
Suraj

3KEH Balance Sheet Values not updated in Profit Center

Hello Peofit Center experts
I have Assigned Profit Center for few balance Sheet Accounts in 3KEH.But values are not updated in respective Profit Centers.
I have to do any configuration settings for transfer Balance Sheet accounts to Profit center or Assignment 3KEH is enough.
Please guide me
Thanks
Kameshwar Rao

Issue has been resolved.1
Issue has been resolved

XL REPORTER: Balance sheet by project code

Dear all,
I am trying to use XL report to create BS report by project code (in columns). I could get it to work 90%. I am now stuck at the point where i need to separately show the amount when there's no project code assigned. When i use column expandsion on the project code, I could get all data (with project codes) to show up nicely. But I couldn't get a separtely column shown NULL project code. Can anyone provide some advice on this issue?

Hi,Alan Chan.
you can put column ALL Posted Items it will display (Null
Project+Project) Amount next as you said Column wise All
Projects amounts.
Ex.
*G/L A/C Name** All Posted Items Project A Project B Project........
Above you metioned Null Projects means you are not choosing
Project when you are raising JE Documents that's right ? you
will take Document Series wise.
Reads,
sampath kumar devunuri.

New GL and Impact on BI Financial statement reports

Dear All,
I would like to know if and how the finacial statment reports would be affected by using the new GL extractor 0FI_GL_14. New GL is being implemented on ECC, hence the change in extractor in BI.
Is there a standard cube that can be used for Financial statement reports(Balance Sheet comparision, BS by PC,P&L reporting by PC) for New GL.
Currently we are getting our financial statement reports out of a Virtual cube which is based on a function module Module:RS_BCT_FIGL_DATA_GET_VC1.
*Our current extractor for FIGL is 0FI_GL_4 .
Appreciate your Input on this .

Hi,
You will find all the details here:
http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
-Mayuri

Financial Reporting in BI. Balance Sheet, Profit & Loss

Hello Gurus,
Background
I have a problem in finacial reports esp. Balance Sheet and Profit & Loss reports. When SAP ERP implemented, they have designed the FSV according to the country accounting and business requirements for external reporting. But the regional financial office in the UK requires a different way of reporting esp. the break up of costs in P&L.
As a solution they, non BI and Management have suggsted to design these reports Balance Sheet and P&L in BI and change the design as per the requirement for UK office. i.e For P&L combine FI and CCA queries.
Problem
My problem is, the queries are designed as GL Account Heirarchies and that are static. So for any GL I need to open the Query (FI) and add the GL into the specific group and any new Cost Center I need to open CCA Query and update Cost Center and Cost Elements manually. After adding the GL I need to reconcile both reports...etc It takes half day or full day sometimes to reconcile the reports.
P&L Report is designed as a workbook having three sheets. This workbook has two queris , FI and CCA. Both of them static heirarchy (user defined). So GL Grouping is maintained manually. The third sheet, has the layout and formula to fetch the values from the other two sheets.
Also Balance sheet workbook is having two sheets. The query is having 0GL_Account heirarchy. So when a new GL is added, I need to change the formulas on the other sheet which displays the Balance Sheet in the required format.
My questions
What is the best practice for month end / year end financial reports?
How you have designed the P&L and Balance sheet in BI?
Do you maintain GLs manually?
How can I re-design this reports so that I need not spend a signle minute of them on every month end / year end.
Regards
MultiABAP

To be honnest, I didn't fully understand your case, but I got the general logic.
I would say that you first need to harmonize your data and apply to them the group business rules before doing your reporting. This can be done by different ways. The best one according to me is to define a consolidation chart of accounts (based on the group policy) and mapp these accounts to the operational accounts automatically using BI transformations. Then you'll be able to define your reportings based on this harmonized referential.

Balance sheet report - cube 0FIGL_C10 (NW04s)

I am creating a balance sheet report using 0GL_ACCOUNT as a hierarchy. The infoprovider is 0FIGL_C10.
The 0GL_ACCOUNT hierarchy has nodes:
-> Stockholder's equity
 --> Profit/loss current year
 --> Calculated profit
 --> Calculated loss
The nodes Calculated profit & Calculated loss have no leaves, so these hierarchy nodes don't show in query. However they show on ECC report.
What is the link?
I ran a delivered quey for virtual cube 0FIGL_V11 which uses 0GLACCEXT (financial statement item) and these nodes still don't show.

Voodi,
Description of problem
- The P&L statement node amount is supposed to roll up to the Profit/Loss current Year node in the balance sheet
- If amount is a profit, amount goes to calculated profit node
- If amount is a loss, amount goes to calculated loss node
- When I run a balance sheet report the Profit/Loss current Year node does not show at all. I assume because no data for leaves.
- When the customer runs a FS report in ECC, they see the Profit/Loss current Year node
- Also, the chart of accounts used is WACA, but the leaf forcalculated profit is 0COA0BRESULT 2A and the leaf for calculated loss is 0COA0BRESULT 1A.
- Where does this config take place in ECC for the FS hierarchy? I went into ECC and looked at FS item versions and don't see an item under calculated profit or loss.
- The customer expects these leaves to appear in query result. I am trying to determine if some config is required in ECC for FS item or do I need to perform calculation in query
- Not FI savvy

PCA Trial Balance Sheet Report

Hi
In GL module the transaction F.08 gives you a trial balance with debit & credit values by GL, is there a report which does the same in PCA? there is a similar report in KE80 8a-PCA005G but this is only working for P&L accounts I need the report to work for balance sheet accounts.
We are not using the new GL.
thanks for your help

Voodi,
Description of problem
- The P&L statement node amount is supposed to roll up to the Profit/Loss current Year node in the balance sheet
- If amount is a profit, amount goes to calculated profit node
- If amount is a loss, amount goes to calculated loss node
- When I run a balance sheet report the Profit/Loss current Year node does not show at all. I assume because no data for leaves.
- When the customer runs a FS report in ECC, they see the Profit/Loss current Year node
- Also, the chart of accounts used is WACA, but the leaf forcalculated profit is 0COA0BRESULT 2A and the leaf for calculated loss is 0COA0BRESULT 1A.
- Where does this config take place in ECC for the FS hierarchy? I went into ECC and looked at FS item versions and don't see an item under calculated profit or loss.
- The customer expects these leaves to appear in query result. I am trying to determine if some config is required in ECC for FS item or do I need to perform calculation in query
- Not FI savvy

Simple Question about BW reports p&l and balance sheet

I haev two reports Balance sheet and P&L both have the same fields AS below, i want to know what is the key field which i can make the variable for user to display balance sheet or P&L is that 0GLACCEXT financial statement can do that.Any hints will also be appreciated
Account Number
Company code
Business area
Joint Venture
Controlling area
Fiscal year/period
Currency
Transaction Type
Trading partner
Profit Center
Cost Center
Cost Element
Functional Area
Key Figures
Financial Statement
Account Segment
Chart of accounts
Company code
Currency Type
Comparative Fiscal year/ period
Fiscal Year Variant
Fiscal year/ period
Version
thanks
Regards
Soniya Kapoor

Can u PLEASE clarify if 0GL_ACCT HAS two nav attribute which can be used as filter P&L Account and Balance sheet Account to distingush the between the p&l and BAl sheet
but now user want one field like "psbl" which will write on report either pl or bs
please tell how to make the field as free characteristic so that it will pop as pl or bs once user click on it .i will reward all points after this small help
thanks
soniya

Balance sheet is empty

Hi experts,
I entered all of the initial value of G/L accounts and BP. but when I checked them in financical report --> balance sheet, I found all of them are zero.
In financial->chart of accounts, I sure there exists initial value in each account. why can not i read them in balance sheet?
Thanks...

yes, it's a new database. no any transaction except opening balance. I use copy express and duplicate it from a test database I created last year.
in tribal balance, it can show all of BP's initial value if i ticket BP option.
but if only ticket G/L accounts, an error message appears: "No accounts found (Message 604-16)"
Thanks...
PS, In my old test database, balance sheet can shows all testing value I input by opening balances.

Financial Template Reports (Balance Sheet) - Auto appearance of running profit figure

Similar Messages

Maybe you are looking for