Finanical report clarification

Hi Friends,
Can any one can clarifies my doubt, which is on financial report -
Can we able to find "Hyperion financial report log who is running which reports and when" - using the FRUserLogin.log i could able to find the login user and time but not the ran reporting details. Is there any option to find out which report has been ran by the user.
any one help me on this clarification.
Thanks
Suresh

In version 9.3.3 and above (11) you can turn on usage tracking in workspace under the Administer tab. This will dump stats to a database table, and I believe this includes which reports are being run. This specifc feature is not available in 9.3.1 and below...
Nick

Similar Messages

Reconciliation Report Clarification Needed

Their is a report named "Locate Reconciliation in Bank Statement by Row Number" Under: Banking -> External Reconciliation.
In Query-Selection Criteria -> Visual Order (What is this?) and how to add account number in the list. As I can only see couple of accounts. Please advice.

Hi Paul,
Though we dont have a crystal Report for what you are looking at but I think our add-on Bank Reconciliation Inquiry would be a helpful tool. The add-on has a screen with some fields like GL Bank Account, Statement No, Statement Date and lower half is bifurcated into two sections column wise which shows in Section 1
<<Section 1- Values in Books>>
GL Balance
+Positive Adjustments
Sub Total
-Negative Adjustments
Ending GL Balance
In section 2
<<Section 2 - Values in Bank statement>>
Cleared With./Chks.
Cleared Inc./Dpsts..
Balance on Statement
+Out Standing Deposits
Sub Total
-Out Standing Checks
Ending Balance
Difference The difference between GL Ending Balance and Bank Statement Ending Balance is shown.
Anyway, I think this already getting a bit too complicated to inform about the add-on over this forum but I think this add-on would satisfy the requirement which you have presently. If you have an interest and would like to know more, please contact us off forum for detailed feature list and white paper for the add-on. There are more features coming up than just the above defined ones like list of all cleared/un-cleared deposits/payments/Adjustment each on a tab with further drill down facility!
Regards,
Cheers,
Nits
Manager - SAP Business One
G r e y t r i x
It's time to think outside the box.
Migration, Integration, Customization and Modification Solutions
E-mail: sap at greytrix.com
Web: [www.greytrix.com|www.greytrix.com]

BI 7.0 Reporting Clarifications

Dear all,
We have specific requirements in our WEB reporting as listed below, could anyone let us know the possibilities of doing these ?
1. Word Wrap - Column Headings for Characteristics (We are aware that it is possible for Key Figure Column Headings)
2. Word Wrap - Data dynamically for characteristic values (Eg. Customer from Canada should be displayed in 2 or 3 rows as we normally do in MS Excel)
3. Jump Targets - Using Counter values (Counters can be Calculated Key Figures or Stored in the InfoProvider)
4. Variable Selection based on Previous Selection like below, if the selection for PROD_CAT is CAT001 then only PROD01, PROD02 and PROD03 should be visible or displayed or fetched in the next variable selection (Drop Down)
PRODCAT_ | PROD
CAT01 | PROD01
CAT01 | PROD02
CAT01 | PROD03
CAT02 | PROD04
CAT02 | PROD05
CAT02 | PROD06
Kindly let us know if the above are possible in any way ?
Thanks!

Hi,
By jump target I think you meant Report to report Interface. Jumping from one report to another document. If it is yes, then it is possible.
Regarding word wraps, Iam not sure.
One thing is all the mentioned stuffs are possible in Crystal Reports.....
Regards
Usama Muhammad

SAP REPORT CLARIFICATION

hi,
when i am cheking the report MC.9 and MCBR for one material under same plant and storage location, i am getting different data, why it is happening?
in report MCBR it is showing the batches, hile there is no stock under these batches.plz let me know hy it is so?
plz help on this.
regards
jash
Edited by: diptasya jash on Feb 4, 2009 10:21 AM

hi
in MCBR info structure S038 - INVCO: Batches used
while MC.9 infostucture S039 - Inventory Controlling is used
now
u can check this stuctures in MCB4
so MCBR is used for materials with batches and the MC.9 is for total inventory
hope it clears

Withholding tax report clarification: Witholding tax base not excluding VAT

HI
In witholding tax settings we have settings to to take NET amount as base.
But for the entries where VAT is manually given Withhloding tax base is not excluding VAT?we are having an entry where we are inputting VAT manually using FB60.entry would be
DrStock
DrVAT
Cr Vendor.
WHY IS THIS?
Where as it is taking net amount as base correctly for the cases where VAT is automatically calculated
How is automatic calculated VAT is related to witholding tax base amt?
rgds

Hi,
This thread has been created some time ago and recieved no response. Can you please close if you feel this issue/query has been resolved in the meantime. If it has not then please provide additional information in relation to your query. By providing updates to your thread it moves you thread to the first page of thread and increases visibility and possiblity for the multiptude of experts in SDN Forums to offer their support.
Therefore please update with more information or close thread.
Thank you for your assistance.
Regards,
Brendan.
(ERP FI/CO SDN/WIKI Moderator)
http://wiki.sdn.sap.com/wiki/display/ERPFI/ERP+Financials

Essbase Error:1060200 in Interctive Reporting

Hi Eveyone,
Would require the technical inputs on the below mentioned queries:
>
>
>
(1) Attached a screenshot of the error message we got while
working on Interactive Reporting having the datasource as Hyperion
Essbase cube. Please let us know about this error message.
(2) How to **view** the Duplicate members in the report?
(3) Whether only 256 columns is supported in Interactive Reporting?
Your early response would really be of great help.

maybe i am not clear
I am having too pulls different accounts number to build the member formula
From the account dimension for Finanical Reports
IE
I have tried
"Consolidated Net Income" =@sumrange("40000":"90100"); No Luck = #missing in Smartview
I have tried
"Consolidated Net Income" =@sumrange("40000":"90100"); Essbase Error 1012703
and
"Consolidated Net Income"=@sumrange("accounts","40000:90100"); Essbase Error 1012703
and when i attempting to just add the account manually in the member formula Esbase Error 1012700 Dynamic Calc Not allocate more than 12 Block
again what am I missing
Edited by: Next Level on Jan 16, 2012 1:53 AM

Anyone successfully applied Patch 9616917:Hyperion System 9 BI+ 9.3.1.3.20?

We want to get Windows 7 and IE 8 support for Finanical Reporting that what the patch is about.
Before applying the patch, we have
Oracle’s Hyperion® Shared Services™ Release 9.3.1.0.11
Oracle’s Hyperion® Reporting and Analysis - System® 9 Release 9.3.1 Service Pack 3
Oracle Application Server 10g 10.1.3.1.0
Oracle Essbase Server 9.3.1.3.5
All running on a AIX 5.3 64-bit server.
We have followed the instructions to install BI+ Patch 9.3.1.3.20 and below are the steps
(1) Stop all FR Services + UI Services + Web server
(2) Replace the files, HReports.ear, HReports.jar, HRPrinting.exe, HyperionADMWidgets.jar
(3) Run Configuration Util (Deploy to Application Server + Configure Web Server)
(4) Redeploy $BIPLUS_HOME/InstallableApps/workspace.war
(5) Redeploy $BIPLUS_HOME/InstallableApps/HReports.ear
(6) Restart FR Services + UI Services + Web server
After applying the patch, I still can logon workspace. Under the Help menu, the version doesn't update.
Workspace Version:9.3.1.3.0.401
UI Version:9.3.1.3.0.401
Server Version: 9.3.1.3.0.401
When I try to open any FR report, I got the following error message.
"Required application module reporting.HRRunDlg is not configured. Please contact your administrator."
"Communication Error"
"http://server:port/hr/xml/HRConfig.jsp?LOCALE_LANGUAGE=en Unable to process request."
Does anyone successfully installed the patch, please kindly share your experience? Thanks.

Hi,
We too having similar issue on Financial Reporting after applying 9.3.1.3 patch on current version 9.3.1.0.0.248.
After applying the patch, we are able to test Shared Services, BI+ reports IR, WA after logging on to workspace successfully other than the FR Reports.
I verified under the Help menu for the version and they are as below :
Workspace Version:9.3.1.3.0.401
UI Version:9.3.1.3.0.401
Server Version: 9.3.1.0.0.248
When I try to open any FR report, I too getting the similar error message that you faced.
"Required application module reporting.HRRunDlg is not configured. Please contact your administrator."
"Communication Error"
"http://<server>/hr/xml/HRConfig.jsp?LOCALE_LANGUAGE=en Unable to process request."
Was this issue resolved? If so can you please share the information.
Thanks,

ASO Drill down problem needing desperate help

In Excel addin and Financial Report, I have problems with drilling down. We're using Essbase ASO 9.3.1.
The scenario is as follows:
Parent 　Figures
z 　　
　z1 100
　z2 200
　z3 300
1. When I retrieve in Excel or FR for z, I get 600 which is corrent.
2. When I retrieve in Excel or FR for z1 or z2 or z3 or all together, I get correct figures.
3. When I retrieve in Excel or FR both parent and child, z = 600, z1 = 100, z2 = 200, z3 = 300, I still get correct figures.
Problem:
When I drill down from Excel or FR from a, which had correct figures, z1 = 100, z2 = 200, z3 = 300, will be correct but z will be missing (z = missing).
Is there anyway so that I can drill down from z and still having all figures correct like I get in point 3.?
Similarly I found a post as follows, which has similar problems:
ASO retrieves inconsistent between Excell and Finanical report in 9.3.1
The difference is that my Excel does not display parent as well when drilled down.
Edited by: sycshk on Dec 22, 2008 2:14 AM

Hi Anjana,
Check your DSO setting was checked for SID generation upon activation or not. If it unchecked then your report will run very long time because of no indexes.
Try your report with the fields you are drill down indefault view and see how much time report is running. So you will know whether it is dril down problem or huge data problem. Try to keep as many as filters as per user.
Thanks.

Using SQL Server as a Database sources for Essbase and Planning

I was reading Jake Turrell white Paper on Hyperion Planning "sandbox" enviroment on a laptop and he stated that you can use SQL Server, u guess my question is i have been using oracle 11gr2 is there really any different
also
is best to build different schema for
Shared Services
workspace
Essbase Admin Srvices
Planning system Respostory
Planning App's
Calc manager
and
Finanical Reporting and web analysis
i have been just buildint the Instance n Oracle and making a schema for planning
Please advise
Edited by: Next Level on Oct 18, 2012 9:27 PM
Edited by: Next Level on Oct 18, 2012 9:30 PM
Edited by: Next Level on Oct 18, 2012 9:31 PM
Edited by: Next Level on Oct 18, 2012 10:11 PM

FWIW, my own (ugh) install of 11.1.1.3 32 bit on my laptop (oh, soon I am going to jettison this thing and move to a 32 gig laptop) I am using SQL Server 2005. A client from last year used the same release of SS but I think the 64 bit release. John Booth's EPM AMI uses SQL Server Express 2008. IOW, yeah, you can totally use SQL Server with the EPM suite. I think that there is an exception for ERPi, but I could be wrong about that. For sure I used ODI 11.1.1.5 with SQL Server as I (gasp) set that up myself out on the cloud.
Regards,
Cameron Lackpour

Report Painter - CO-PA Clarification

Hello All,
I have few clarifications on the below in CO-PA Reports, could somebody help me out.
1. In the report form, i have set the columns to display in number format of 10,00,000. when i execute the report in the initial screen i dont have any problem, but when i drill down by product or some other characteristics, i am getting an additional row on the top saying "Displayed in 10,00,000 inr" for each column. Is there any way to avoid this, i dont want this row to get displayed for the drill down display.
2. In one report, the requirement is to calculate rate variance for the product, the formula i had setup is variance between the plan minus variance between the actual * sales qty. Its working fine when both the values exists. When there is no value in plan variance and values exits for actual variance, the output comes as per the formula, but conceptually when i dont have any plan values for variance, it should not calculate rate variance for the product. How can i setup in the formula or row or by anyway saying if there is no plan variance, the the rate variance should calculate.
Request you to share your experience in this, please
Thanks
With Regards
GJ.

Hi,
Perameters in General Data Selection apply to the entire repost (every column and row). Since the four columns of your report are having different period and possibly different FY, you can not put these two parameters in General Data Selection. As my previous posting explained, in addition of standard variable &1PERIV and 1CGJAHE, you will need to define 3 more variables for period FY respectively:
Period Variable 1 - ZPERI2 - Formula: IF '&1PERIV' < 12 THEN '&1PERIV' + 1 ELSE 1
Period Variable 2 - ZPERI3 - Formula: IF '&ZPERI2' < 12 THEN '&ZPERI2' + 1 ELSE 1
Period Variable 3 - ZPERI4 - Formula: IF '&ZPERI3' < 12 THEN '&ZPERI3' + 1 ELSE 1
FY Variable 1 - ZGJAHR2 - Formula: IF '&1PERIV' < 12 THEN '&CGJAHE' ELSE '&CGJAHE' + 1
FY Variable 2 - ZGJAHR3 - Formula: IF '&1PERIV' < 11 THEN '&CGJAHE' ELSE '&CGJAHE' + 1
FY Variable 3 - ZGJAHR4 - Formula: IF '&1PERIV' < 10 THEN '&CGJAHE' ELSE '&CGJAHE' + 1
You then use variable 1PERIV and 1CGJAHE for column 1, ZPERI2 and ZGJAHR2 for column 2, ZPERI3 and ZGJAHR3 for column 3, and ZPERI4 and ZGJAHR4 for column 4.
Regards,
Ming

Reviewed documentation on Reporting: I will appreciate some clarification

Hi,
Reviewed documentation on Reporting: I will appreciate some clarification:
1. Can you help me understand what "Staging" means as used here:
A data warehouse system serves primarily to stage information from various data source
The information is staged in various forms including personalized reports, freely definable queries, and predefined reports.
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
3. Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
4. "DataStore Objects are available for transaction data and for master data."
When do we decide to store master data in a DSO?
5. Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
6. i. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Thanks

Hi Amanda,
2. Is RemoteCube the same as Virtual Cubes? if not, what is the difference?
Yes, they are one and the same.
3.Can you help me understand what "flexible update" means as used here:
Characteristic InfoObjects have to be included in the InfoProvider tree in the Data Warehousing Workbench to make them available as data targets for flexible updates and as InfoProviders for reporting.
in 3.x, you have infosources and not transformations. So you have basically two types of infosources, direct update and flexible update.
Direct update infosources do not have any update rules. These are used for master data loading since the format of data is usually fixed as in fields etc.
Flexible update datasources have update rules, which means that you can use it for loading pretty much anything. You can load master data by changing the update rules and you can use the same infosource for loading transactional data as well. What the statement means is that the infoobject has been set as an infoprovider. and therefore it can be used as a source in a query. The loading is done via flexible updates.
More info on direct and flexible updates can be found here :[3.x InfoSource Types|http://help.sap.com/erp2005_ehp_04/helpdata/EN/87/3fdf9587f211d5b2ff0050da4c74dc/frameset.htm]
5)Formula Collision vs. "Exception Aggregation"
I understand what formula collision is about but is it the same as "Exception Aggregation"?
If not, do you have a real-life example to help me understand the concept of "Exception Aggregation"?
The documentation/link is not helping.
I'm glad that you understand what formula collision is...since its a difficult concept. Exception aggregation is much simpler.
For every key figure that is present in BW, there are two types of aggregations that can be maintained.
Standard: can be sum etc.
and exception aggregation like avg etc. When you do this, you need to give a reference characteristic. By default this is time. and usually it is summation. Now when you drilldown in your query based on the ref. characteristic, the exception aggregation is used.
Eg [http://help.sap.com/saphelp_nw70/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm]
6. With the followin limitation on Display attribute, why not always make the attribute Navigational?
"You can show Display Attributes in a report in the drilldown. However, navigation steps are not possible. (For example, you cannot choose values from a display attribute as a filter.)"
ii. Any example where Nav Attrib does not make sense but it must be Display attrib?
Essentially this is a preference or a personal choice basically. You can have several attributes. but keeping all of them as navigational does not help and degrades system performance as they have to be interlinked. For eg.
You have an employee ID as your characteristic.
attributes are as follows
Date of birth
division
salary stack
*** etc
now things like division,salary stack and *** could be used as filters in a query but date of birth would in general not be used as filter and hence would make no sense to use it as a navigational attribute(unless you want to find all employees whose birthday is a certain date ).
In the end, it just comes down to the requirement. If you are required to put a filter on an attribute of master data, then it needs to be a nav. attribute else a display attribute would suffice.
Hope this helps.
Regards.

ClariFit Report Instant Search [Plug-in] for 2 Report Regions

Hi,
can we apply ClariFit Report Instant Search [Plug-in] for two report regions at a time?,
can we one search field for two different report regions?
Thanks in advance.
Chandran

thank u so much VC guru, it really workd now action is happening wen i click on right click options. but again i hav an issue
i used 2 right click options like PAGE2, GOOGLE., which redirects to the respective pages. and i used JS function as
function myMenuAction2() {
if (Menu='page2')
window.location="http://apex.oracle.com/pls/apex/f?p=71510:2:132217491108949:::::";
if(Menu='google')
window.location="http://www.google.com";
but if i click on both the right click options individually, its get redirected to the 2nd page only... and not to the google page at all. i jus wanted to know how to do it guru... and the credentials are http://apex.oracle.com/pls/apex/f?p=71510:1:16973655787072::::: (username-test; paswrd: apex14gm) ... pls help me out....
thanks in advance

Clarification on Report UMG_R3CHECK_FILES

Hello All,
I am working on Combined upgrade and Unicode project from R/3 4.7 to ECC 6 with Ehp 4. Currently running the Unicode pre-conversion steps and I would like to have your clarification in executing the report UMG_R3CHECK_FILES
As per the CU & UC guide i have executed the report and also checked the note 89384. I would like to know should i create the control files from SAP system using the report or at Operating system level (with <SID>adm logon) as mentioned in the note.
Also I have created a folder in application server with full rights for <SID>adm. Later when i try download the files from SAP referring to this path there are no files downloaded and no error occurs. Its going blank.
Any help on this would be much appreciated
Regards,
Anand

Hi Anand,
You need to get the list of all cluster tables in place, from that Report UMG_R3CHECK_FILES, there is a download button on top left. Select the place where you want to download all scripts.
This report should only be used together with transaction SPUMG during the preparation of a system for the conversion to Unicode. The report creates control files for R3check as described in note 89384.
For more information about the transaction SPUMG, please refer to the 'Unicode Conversion Guide' which is available as attachment of note 551344
For each cluster table, you need to run below, better to make script and execute, try with first then move forward,
Assuming you downloaded all scripts in path /tmp/CLUSTER (with SIDADM 775 ownership)
SIDADM> cd /tmp/CLUSTER/
make fie vi CDCLS.txt
export file='/tmp/CLUSTER/'
dumping=yes
client=<nnn> -- only prod client
select * from CDCLS.......one bye one for all for all tables.
save it as CDCLS.TXT
2. Path check, cd /tmp/CLUSTER
SIDADM> R3check CDCLS.TXT
You will get the result in trans.log in same path.
3. So on for all cluster tables.
Make sure where you execute file,
1. try to build txt files for all cluster tables scripts via report.
Run it in same place like /tmp/CLUSTER -- like above example
2. Now you need to run R3check for all control files, you can run in parallel, it will take some time to give output, depends on your cluster table size.
I hope you are doing for sandbox or dev system.
Let me know if any issue.
Regards,
Amit Lal

In one of my report i have clarification purchase price variant report

In one of my FI-SD RELATED REPORT, very very urgent please
1. Net material cost difference due to Forex:
Budget rate during price revaluation: USD TO EURO: 1.4128
Actual rate during goods receipt: USD TO EURO: 1.5888
Difference in Ex-rate: 0.176
Net material cost difference due to Forex: 145,782 x 0.176 = USD 25657
Regarding the pricing conditions in the purchase order.
i am getting the cost (kbetr) but how to get the exchange rates as mentioned above
2.Total PPV relating to inventory sold during current month
how to et purchase price inventory sold like
the flow from po-so-fi, can u pls give the tables and links related with them
i am already using bkpf, bseg , ekko ,ekpo and condition tables to get co code, doc date , post date , assigment , po number , item
how to get the inventory sold.
pls give flow from po to so to fi
regards
subba
Edited by: KODAMANCHILI SUBBARAO on Jul 3, 2008 11:06 PM

Would you mind re-writting your question? I am sorry but I can't understand your problem.
Just trying to help.
Leonardo De Araujo

Urgent Clarification seeking on R12 Account Analysis Report

Hi Guys
I have an urgent requirement regarding R12 Account Analysis Report.
As per Metalink Doc ID : R12 GL Standard Reports Do Not Display Source And Line Item Data [ID 836847.1] ..Account Analysis report in R12 application does not display any value for Source/Line item column as data in gl_je_lines reference columns are not available.
Do we have any replacement report or any other way to get this info in R12 since it was available in 11i. It is creating lot of problem for reconciling the AP/GL
It will be good if you can reply ASAP.
Thanks
Ajeesh

Hi
I believe you can modify the standard account analysis template (RTF using the responsibility "XML Publisher") and include the field for source. This field is available as a standard XML tag in the report. This is a very little effort and can be done quite easily.
Hope this helps. Let me know if you need any clarity in this respect.
Vinit

Finanical report clarification

Similar Messages

Maybe you are looking for