FINANTIAL DOCUMENTS MISSING --- ORACLE LOGS FULL

Hi Experts,
9 documents are missing and when they were saved the system showed the message "update has been stopped". This was because of the Oracle LOGS (full).
When Oracle problem was solved the documents were not found in SM13 to recovered.
Any clue?
On the other hand If a have finantial documents in QAS how can I put it on PRD?
Regards.

Hi,
Schedule your backups according to the full backup time.
Do a test of full backup and fine the time that it takes to complete the full backup. You can include "plus archivelog" if you want your archive logs to be backed up along with the full backup. This is most preferred as this makes restoration easy too.
If your full backup takes, say, 4 hrs to complete and if you schedule your full backup at 00 00 hrs on your scheduler, then schedule the archive backups after 04 00 hrs. This will solve your problems with missing archive backups.
>> "But from RMAN specialist I heard that this may cause problems with full backup. During full backup also archive logs are backed up (at the start and end) so there might be a problem with accessing the file that is used by another process. And this may cause problem with full backup - which we want to avoid especially."
This will throw out errors if your input to full backup consists "delete input" for your archived logs, else the process will not have any problem and succeed.
Also when one or more of backups run concurrently, "ORA-00230: operation disallowed: snapshot control file enqueue unavailable" error may occur but this is rare case.
Thank you!!

Similar Messages

  • Missing archived logs in v$archived_log

    I want to monitor if system accounts such as system, sys or other DBA accounts
    did any DML in my application schema. What are the minimal audit statements?
    needed to accomplish this. I know using Oracle Database Vault one can set realm to restrict this but I do
    not have Data Vault, just looking to audit this using Oracle’s database auditing.
    My organization also has Oracle Audi Vault, but Database Auditing Events have to be set in database
    first for collection agent to pass this information to Oracle Audit Vault server.
    Thanks a lot.

    Duplicate post
    Please ignore
    Missing archived logs in v$archived_log
    Handle:      user632098
    Status Level:      Newbie
    Registered:      Apr 20, 2008
    Total Posts:      115
    Total Questions:      29 (28 unresolved)
    Edited by: sb92075 on Dec 19, 2009 4:49 PM

  • Errors on viewing the documents in Oracle IPM

    Hi All,
    We're facing the following errors when trying to open some of documents in Oracle IPM - Advance viewer.
    Error Caching Page:_ Server returned HTTP response code: 500 for URL: http://ipmdev:16410/imaging/renderimage/export?documentId=2.IPM_377324&version=1&annotations=false&color=true&....
    Error updating annotations:_ Server returned HTTP response code: 500 for URL: http://ipmdev:16410/imaging/annoations/getAnnotations?documentId=2.IPM_377324&version=1...
    We're getting the following exception when we open the same document in IPM- Basic viewer.
    A cache exception occurred. J2EE-JOC-044 An exception is occurring in the method: CacheAccess.get
    Error counting pages while loading cache entry: J2EE-JOC-043 base exception: null.
    If anybody has a solution for this please share with us.
    Thanks to all in advance.
    Edited by: 902526 on Feb 20, 2012 3:46 AM

    Hi,
    Is this error being thrown after an annotation has been created or is it across all documents when viewed ?
    Do check the UCM repository connection that has been created and if so perform the following steps :
    Correct the Repository Proxy Setting to the UCM Connector in IPM.
    Log into IPM.
    Select Manage Connections.
    Select the UCM Connection.
    Click Modify.
    Verify the Repository Proxy: Enter the name of the repository proxy. By default, the repository proxy name is fmwadmin. This field is required.

  • Patch 4247037 Required component missing  oracle.sdo.locator, 11.2.0

    Hi Hussein & Srini,
    Need you help again . After Installing 11.2.0.3 x86_64 software (files 1of7.zip and 2of7.zip of patch 10404530) & runned the Installer from Example..
    as part of part of upgrading the Vision database version from 11.1.0.7 to 11.2.0.3 in EBS 12.1.1 according to[ID 837570.1] and MOS Doc 1058763.1}
    I followed the steps mentioned in http://chavalis.blogspot.in/2012/10/upgrading-r12-11-vision-database.html#!/2012/10/upgrading-r12-11-vision-database.html
    When am trying to apply this patch 4247037 getting this Error.. Please advise ..
    [oracle@ebs ~]$ echo $ORACLE_HOME
    /oracle/VIS/db/tech_st/11.1.0
    [oracle@ebs ~]$ /oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch apply /home/oracle/4247037
    Patch 4247037: Required component(s) missing : [ oracle.sdo.locator, 11.2.0.3.0 ]
    [Apr 6, 2013 2:36:25 AM] [ Error during Prerequisite for apply phase ] Detail: OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
    [Apr 6, 2013 2:36:25 AM] OUI-67035:System intact, OPatch will not attempt to restore the system
    [Apr 6, 2013 2:36:25 AM] --------------------------------------------------------------------------------
    [Apr 6, 2013 2:36:25 AM] The following warnings have occurred during OPatch execution:
    [Apr 6, 2013 2:36:25 AM] 1) OUI-67620:Interim patch 4247037 is a superset of the patch(es) [  4247037 ] in the Oracle Home
    [Apr 6, 2013 2:36:25 AM] --------------------------------------------------------------------------------
    [Apr 6, 2013 2:36:25 AM] Finishing ApplySession at Sat Apr 06 02:36:25 GMT+05:30 2013
    [Apr 6, 2013 2:36:25 AM] Total time spent waiting for user-input is 0 seconds. Finish at Sat Apr 06 02:36:25 GMT+05:30 2013
    [Apr 6, 2013 2:36:25 AM] Log file location: /oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/opatch/opatch2013-04-06_02-36-18AM.log
    [Apr 6, 2013 2:36:25 AM] Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
    [Apr 6, 2013 2:36:25 AM] StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:4835)
    [Apr 6, 2013 2:36:25 AM] StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3888)
    [Apr 6, 2013 2:36:25 AM] StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5853)
    [Apr 6, 2013 2:36:25 AM] StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1787)
    [Apr 6, 2013 2:36:25 AM] StackTrace: oracle.opatch.OPatch.main(OPatch.java:651)
    Couldn't understand even after going the Readme of the patch... Do i need to set the Oracle_Home to to new Oracle_home to /oracle/VIS/db/tech_st/11.2.0.3 as it not specifically mentioned
    in the readme of the Patch Or in http://chavalis.blogspot.in/2012/10/upgrading-r12-11-vision-database.html#!/2012/10/upgrading-r12-11-vision-database.html ..
    Or Perhaps i couldn't get it..... Please suggest
    Thanks
    Priya
    Edited by: 971054 on Apr 5, 2013 2:39 PM

    when i changed the Oracle_home i.e
    [oracle@ebs ~]$ export $ORACLE_HOME=/oracle/VIS/db/tech_st/11.2.0.3/
    [oracle@ebs 4247037]$ /oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch apply /home/oracle/4247037
    Invoking OPatch 11.2.0.1.7
    Oracle Interim Patch Installer version 11.2.0.1.7
    Copyright (c) 2011, Oracle Corporation. All rights reserved.
    Oracle Home : /oracle/VIS/db/tech_st/11.2.0.3
    Central Inventory : /oracle/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 11.2.0.1.7
    OUI version : 11.2.0.3.0
    Log file location : /oracle/VIS/db/tech_st/11.2.0.3/cfgtoollogs/opatch/opatch2013-04-06_03-07-37AM.log
    Applying interim patch '4247037' to OH '/oracle/VIS/db/tech_st/11.2.0.3'
    Verifying environment and performing prerequisite checks...
    Do you want to proceed? y
    y
    User Responded with: Y
    All checks passed.
    Backing up files...
    Patching component oracle.sdo.locator, 11.2.0.3.0...
    Patch 4247037 successfully applied
    Log file location: /oracle/VIS/db/tech_st/11.2.0.3/cfgtoollogs/opatch/opatch2013-04-06_03-07-37AM.log
    OPatch succeeded.
    [oracle@ebs 4247037]$
    I am not sure whether this is the correct way to do it. as setting the ORACLE_HOME to the new one isn't mentioned in Readme of the Patch
    Or Surely I could NOt understand it... Please suggest
    Thanks
    Priya

  • Xml document to oracle tables - data is not fatching

    Hello,
    I am new to xml and trying to extract some fields from xml document to oracle tables to use them further in application. I have written following to extract values but nothing is fatching from document:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <dmsgo:DMS_GO_Interface xmlns:dmsgo="https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1 DMS_GO_Interface_v1.xsd">
    <dmsgo:majorversion>1</dmsgo:majorversion>
    <dmsgo:identity context="CONFGOFR_OUT" datetimecreated="01/03/2011 10:51" source="go" sourceversion="1.410.1" />
    - <dmsgo:prospect>
    <dmsgo:requestresponse code="0" />
    <dmsgo:references />
    - <dmsgo:configurationcontext dataversion="2163" languageiso="en" orderingmarket="867" saleslevel="R">
    <dmsgo:configurationdate>01/03/2011</dmsgo:configurationdate>
    </dmsgo:configurationcontext>
    - <dmsgo:vehicle>
    <dmsgo:variant baumuster="2120482" manufacturercode="2120482" />
    <dmsgo:desc>E 200 CGI BlueEFFICIENCY Sedan RHD</dmsgo:desc>
    - <dmsgo:colorcombination>
    <dmsgo:interiorcolor codeowner="C" manufacturercode="4201" ppmtype="AU">Leather black</dmsgo:interiorcolor>
    <dmsgo:exteriorcolor codeowner="C" manufacturercode="2497" ppmtype="LU">Cuprite brown metallic</dmsgo:exteriorcolor>
    <dmsgo:paintzone manufacturercode="" preference="2" />
    </dmsgo:colorcombination>
    INSERT INTO p1 (flux_name, elment_1, elment_2, elment_3)
    SELECT flux_name, elment_1, elment_2, elment_3
    FROM XMLTable(
    XMLNamespaces ('https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1' as "dmsgo"),
    'dmsgo:DMS_GO_Interface/prospect/vehicle'
    passing xmltype(bfilename('DMLDIR','prospect.xml'), nls_charset_id('CHAR_CS'))
    columns
    flux_name varchar2(20) path 'dmsgo:variant/@baumuster',
    elment_1 varchar2(20) path 'dmsgo:desc',
    elment_2 varchar2(20) path 'dmsgo:colorcombination/interiorcolor',
    elment_3 varchar2(20) path 'dmsgo:colorcombination/interiorcolor/@manufacturercode'
    Please help.
    Looking forward to early response.
    Thanks
    Usman

    Hi,
    You're missing the namespace prefix on some elements.
    This should work :
    SQL> SELECT flux_name, elment_1, elment_2, elment_3
      2  FROM XMLTable(
      3    XMLNamespaces ('https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1' as "dmsgo"),
      4    'dmsgo:DMS_GO_Interface/dmsgo:prospect/dmsgo:vehicle'
      5    passing xmltype(bfilename('DMLDIR','prospect.xml'), nls_charset_id('CHAR_CS'))
      6    columns
      7      flux_name varchar2(20) path 'dmsgo:variant/@baumuster',
      8      elment_1  varchar2(40) path 'dmsgo:desc',
      9      elment_2  varchar2(20) path 'dmsgo:colorcombination/dmsgo:interiorcolor',
    10      elment_3  varchar2(20) path 'dmsgo:colorcombination/dmsgo:interiorcolor/@manufacturercode'
    11  );
    FLUX_NAME            ELMENT_1                                 ELMENT_2             ELMENT_3
    2120482              E 200 CGI BlueEFFICIENCY Sedan RHD       Leather black        4201

  • Getting error while trying to create a document using oracle web ADI resp.

    Hi All,
    When I am trying to create a document using Oracle Web ADI Responsibility and using "Ben Ri Process Bnf" integrator, it is showing me error
    "The following error has occurred
    Exception Name: oracle.apps.bne.exception.BneParameterException - No parameter list definition at parameter list id 800:PER_RI_JPG_PARAM_LIS
    Log File Bookmark: 868035"
    Can anybody tell me the cause of this error?
    Thanks.

    Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
    Thanks,
    Hussein

  • Staging server archive log full

    Hi ,
    i have encountered my staging server having archive log full which i do not understand.
    i hope anyone can help clarify my doubts
    Production server : oracle 10G , RedHat
    Staging Server : oracle 10G , runnings on windows
    source server : DB2
    the staging server is simply a link between the Production server & db2
    i am running my procedures on the production server which is getting db2's data via the staging server thru dblink
    i have encountered the error : ORA-00257 : archiver error : connect internal only, until freed when i ran some recovery which involved some 20M to 40M records being loaded at the same time
    what i do not understand is why would the Oracle running on windows have its archive log full when it's just a link betw the production and db2
    pls advise
    tks & rgds

    Just go to the archivl log destination and delete some/all of the archive logs then I think the problem will be resolved.
    OR
    connect to RMAN then run
    run {
    allocate channel ch1 device type disk;
    backup format '/u04/rman_backup/RMAN_ARCH_<%s:%t:%p>.bkp' archivelog all delete input;
    It will take the backup of your all archivelog and then delete the archive logs from your current archive log directory.
    Regards
    Asif Kabir

  • BW missing Redo logs

    Hi all
    There are missing Redo logs in Db12 in BW server. There are gaps in the sequence of redo logs and about 13 are not there. If we try to restore from a backup the database is going to become inconsistent.
    Can anyone give us an idea why it is happening.
    Thanks

    Missing Redo Logs???
    I would be very worried...
    When was your last full offline backup?
    How are you dealing with redo logs?  Copy, save and delete?
    What are the parameters in you init<sid>.sap and init<sid>.ora file for dealing with redo logs?

  • Error in db6conv failed due to transaction log full

    Hi,
    I have a huge problem with my production system.
    I was executing db6conv v4.08  to convert a table to a new tablespace and it stopped due to a transaction log full.
    Now I have this situation:
    table soffcont1
    db6conv: status: preliminary
    I check the job db6conv_job_soffcont1 with status scheduled.
    The problem is that when I want to execute this jobs it gives me an error:
    Definition of job db6conv_job_soffcont1 is incomplete. Operation is not possible.
    regards,
    filipe vasconcelos

    hi filipe,
    i will follow up on this problem in you OSS message.
    regards, frank

  • Error in creating the payment document; read job log

    Hi All,
    Recently we are upgraded to EHP4 pack. While running the payment proposal for the vendor I am getting the error 007 "Error in creating the payment document;read job log" Details of job log is as follows
    >            Due date determination additional log
    > Document 1100001518 line item 001 via ILS          694.00-
    > Terms of payment: 05/23/2011   60  0.000 %    0  0.000 %    0
    >  01 days grace period is being considered
    >  Maximum cash discount should always be taken
    >   Payment must take place before 07/23/2011; next payment on 07/27/2011
    > Item is due with 0.000 % cash discount
    Internal error: doc.balance not zero / comp.code SNXL vendor 1009530510 customer
    Balances:        2,052.00- ILS /        2,052.00- ILS
    >
    >            Posting documents additional log
    >  Currencies in line 1: ILS / ILS  Currencies in line 2: USD / ___
    > Document  company code SNXL currency ILS payment method T
    >  LIt PK Acct         RA            Amount            Tax
    >
    >  001 38 2001520500               3,420.00              0.00
    >                                  1,002.02              0.00
    >  002 50 0032118400               1,026.00              0.00
    >                                    297.21              0.00
    >  003 25 2001520500              72,645.00              0.00
    >                                 20,879.23              0.00
    >  004 50 0032118400              21,793.50              0.00
    >                                  6,312.93              0.00
    >  005 50 0010009101              48,457.50              0.00
    >                                 14,036.70              0.00
    >  006 40 0096100000                   0.00              0.00
    >                                    769.63              0.00
    >
    Information re. vendor 1009530510 / paying company code SNXL ...
    I have checked the configuration of FBZP The configuration settings is correct. Can you please help to solve this problem
    Regards
    Girish

    Hi Girish,
    You should be having error FZ326.
    Please kindly refer to the following link in order to solve the issue:
    http://wiki.sdn.sap.com/wiki/display/ERPFI/PaymentProgram-ErrorMessageFZ326
    or
    http://wiki.sdn.sap.com/wiki/x/jY3YCw
    Apply all notes that are relevant to your support packaged.
    Kind Regards,
    Fernando Evangelista

  • F110 " Error in creating the payment document; read job log"

    Hi all,
    when i execute payment in Tcode F110, getting message " Error in creating the payment document; read job log".
    Log for payment run for payment on 30.07.2009, identification TEST1
    Error in the recovery of constants
    Information re. vendor 1000040256 / paying company code BG10 ...
    ... payment not possible because of reported error
    Because of it, the payment file is also not generated.
    The status says " Payment run has been carried out".
    But when the open items are cleared.
    What could be the reason for this error message?
    Regards,
    Vidya

    Hi,
    As the document is in the cleared status, you can try finding out with which run date and run id the documents got cleared. Go to Transaction code SE12 and give the following details - Company code, vendor code and the payment documents (clearing document for the invoice) or you can also give the invoice document numbers and fiscal year.
    The output will tell you which payment run id and run date was used to process the payment.
    Hope this will help you understand what has happened.
    Thanks and Regards,
    Anit
    Edited by: Anit Mangat on Jul 30, 2009 4:38 PM

  • Storing PDF and Word document in oracle database

    any idea, how to store PDF and word document using oracle database.
    thanks

    The common approach is store as BLOB in database, use DBMS_LOB package to handle the loading and reading, sample script source asktom
    Also check this thread in Asktom
    SQL> create table demo
      2  ( id        INT PRIMARY KEY,
      3    theBlob   blob,
      4    dummy_col VARCHAR2(1)
      5  )
      6  /
    Table created.
    SQL> -- --------------------------------------------------------------
    SQL> -- Load a PDF file into a BLOB field and compress the BLOB.
    SQL> -- --------------------------------------------------------------
    SQL> declare
      2      l_blob    blob;
      3      l_bfile   bfile;
      4 
      5  begin
      6      insert into demo (id, theBLOB) values ( 1, empty_blob() )
      7      returning theBlob into l_blob;
      8 
      9      l_bfile := bfilename( 'BLOB_DIR', 'Test.PDF' );
    10      dbms_lob.fileopen( l_bfile );
    11 
    12      dbms_lob.loadfromfile( l_blob,
    13                             l_bfile,
    14                             dbms_lob.getlength( l_bfile ) );
    15 
    16      UPDATE demo
    17      SET    theBlob = utl_compress.lz_compress(l_blob, 6)
    18      WHERE  id = 1;
    19  -- If you don't want compress the LOB just update directly
    20      dbms_lob.fileclose( l_bfile );
    21      COMMIT;
    22  end;
    23  /
    PL/SQL procedure successfully completed

  • How to Edit Word Document in Oracle ADF Application - Apache POI

    Hi All
    I was wondering if there is a way to edit and save word documents in Oracle ADF without loosing the Formatting.
    I was able to edit and save the word document however the Formatting was lost.
    Please let me know if there are any pointers or open source Java APIs that we can use to achieve this.

    Refer the Text Formatting section
    Apache POI - HWPF - Java API to Handle Microsoft Word Files
    HWPF Reads in a Word document with minimum formatting (no lists, tables, footnotes, endnotes, headers, footers)
    Apache POI - HWPF - Java API to Handle Microsoft Word Files
    The _cbt field in class HWPFDocumentCore contains formatting information.
    HWPFDocumentCore (POI API Documentation)
    For more advanced text extraction needs, including Rich Text extraction (such as formatting and styling), along with XML and HTML output, Apache POI works closely with Apache Tika to deliver POI-powered Tika Parsers for all the project supported file formats.
    Apache POI - Text Extraction
    Use Apache Tikka for formatting.
    Apache Tika - Supported Document Formats

  • Recover deleted document from Oracle content server

    Hi All,
    I've deleted some of documents from oracle content server mistakenly. I am using oracle ucm11g.
    I found that we have a feature called "Trash bin". Trash-bin used for recover the deleted document/folder but unluckily settings for "Trash Bin" is disabled in my UCM folder configuration.
    Is there any other way to recover?
    Please kindly help me on this. It's an urgent production issue, please.
    Thanks for your great support in advance.

    Is there any other way to recover?
    Try to take a look at Repository Manager admin application: http://docs.oracle.com/cd/E21764_01/doc.1111/e10978/c03_repository.htm#DAFCGDIE
    If you still can see your items there, you could recover the status.
    If not, I'm afraid your documents are gone from UCM. In that case, you might recover them from a back-up. There is also a chance that documents are still present in the Vault directory, so rather than 'recover', you might 're-submit' them.

  • Problem casting org.w3c.dom.Document to oracle.xml.parser.v2.XMLDocument

    I have the following problem:
    I get my xml-documents as an XMLType from the database and want to compare these using the supplied Oracle class oracle.xml.differ.XMLDiff (i use the java version supplied with Oracle 9i r2).
    XMLType.getDOM() returns the xml-document as a org.w3c.dom.Document,
    what i need for oracle.xml.differ.XMLDiff is a oracle.xml.parser.v2.XMLDocument.
    How can i cast/convert between these two formats?
    thanks!
    p.s. cross-posting with Re: Casting/Converting XMLType to XMLDocument? (but i think this forum is more relevant).

    Hi,
    thanks for the suggestion: i have written the code shown below. It results in a casting error.
    As far as i know, i don't use a oracle.xdb.dom.XDBDocument, i only use a oracle.xdb.XMLType as the input parameter for my conversion-method:
    any new suggestions ???
    p.s. the second method which is commented does work, but is a bit verbose.
       private static oracle.xml.parser.v2.XMLDocument convert2XMLDocument(XMLType xml) {
         // simple version (should work according to tech. doc. 9i r2/ 10g r1 database)
         oracle.xml.parser.v2.XMLDocument doc = null;
         try {
            // n.b. probleem is dat XMLType.getDOM() een w3c.Document object teruggeeft ipv een oracle.XMLDocument.
            System.out.println("convert2XMLDocument(): casting w3c.Document naar oracle.XMLDocument.");
            doc = (oracle.xml.parser.v2.XMLDocument) xml.getDOM(); // public org.w3c.dom.Document getDOM()
            System.out.println("convert2XMLDocument(): done casting w3c.Document naar oracle.XMLDocument.");
         catch (Exception e) {
            e.printStackTrace(System.out);
        return doc;
       private static XMLDocument convert2XMLDocument(XMLType xml) {
         // complex version: works ok !!!
         XMLDocument doc = null;
         try{
            DOMParser parser  = new DOMParser();
            parser.setValidationMode(oracle.xml.parser.v2.XMLParser.NONVALIDATING);
            parser.setPreserveWhitespace (true);   
            parser.parse(new StringReader(xml.getStringVal()));
            doc = parser.getDocument();
        catch ( XMLParseException e ) {
          e.printStackTrace(System.out);
        catch ( SQLException e ) {
          e.printStackTrace(System.out);
        catch ( Exception e ) {
          e.printStackTrace(System.out);
        return doc;
    convert2XMLDocument(): casting w3c.Document naar oracle.XMLDocument.
        java.lang.ClassCastException: oracle.xdb.dom.XDBDocument
         at pnb.bdb.xml.testJDBC.convert2XMLDocument(testJDBC.java:305)
         at pnb.bdb.xml.testJDBC.main(testJDBC.java:187)

Maybe you are looking for

  • Another Customer Service Compla

    Hi, and thank you for reading this message. I've experienced bad customer service from Creative and feel it necessary to add to the other warnings posed in this forum. The basic theme is the same: Creative seems to take deliberate steps to make recei

  • A way to force XMP sidecar file use with JPEG files?

    I have a nice camera but it only saves in JPEG format. Once I rename the files and put my basic copyright info into the metadata, I like to mark them as read-only for safety. However, I want to be able to save the metadata that I enter in Lightroom 1

  • SAP RM: How can I create a Node when the node is not visible for the user

    Hi, Product: SAP records Management for Public Sector Version: 7.00 is it possible to create a instance node when the model not is not visible for the active user? I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with

  • New iphone, should i return and wait for macworld?

    Hi everyone, I have a new iphone, it was purchased on 12.21.07. I love the phone, but it has been a little slow for me and has been freezing every now and then. I've been weighting the option of returning the phone and waiting for a possible upgrade

  • Calculated key Figure for Group By

    I need a way to get the total amounts group by all the retailer that related to the root in BEx Query. Just to explain myself clear, I'm putting the following dummy data. In my current report I've the following: Root     Retailer  Cancel($)    Gross(