Find all instance of sub sequence

Hi,
I am using TestStand 3.5
I have created one sub sequence. I am calling this sub sequence at various places in my Seqence file. I found that the parameter value I am passing is wrong. I want to change it. Is there any way by which I can find out all the calling place of this sub sequence? How? (e.g. in LabVIEW we have Find all instances).
br,
LabVIEW_Vish

Hey LabVIEW_Vish,
The best I got for you is to hit Ctrl-F and check Limit Search to:  Then you can choose All Sequences.  When you do your search you'll see a list of all the places where your search word exists.  Then you can double click on any element in the list and it will take you to that instance.   Your search window should stay open so you can go back to it Window>>Find 'keyword" in: etc..
Hope that helps some,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

  • Find All Instances Scripting

    Hello, I was wondering if there was a way to programatically use the Find All Instances function with scripting?  At the moment my work around is very slow but works.  
    I have a reference to a VI and I have my project open, I then want to find all the places that this VI is used.  At the moment I get all VIs in Memory (Application >> All VIs in Memory), then for each VI I get all SubVIs on the block diagram (Traverse References).  Then for each subVI in each VI in memory, I get the path to the VI and compare it to the path of the VI I want to find.
    As one can imagine this takes too long.  Especially when I can right click my VI's Icon and say Find all Instances and get all 6 instances seemingly instantly.  I searched for a while and couldn't figure out if this was possible or how to do it.  Thanks.
    Attached is my attempt, which just counts the number of times the search VI is called.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
    Solved!
    Go to Solution.
    Attachments:
    Find All Instances Slow.vi ‏20 KB

    Well that was easy, not sure why I didn't think of that.  In any case I made a new VI that does what you mention and it indeed works much faster.  Attached is the improved version in case someone was interested.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
    Attachments:
    Find All Instances Faster.vi ‏19 KB

  • Edit find/change (not finding all instances)

    I am using Edit>Find/Change to change a brand name in a document — however, this feature is not finding ALL instances of the brand name. I am having to manually/visually edit through the entire doc. Suggestions?

    Hi,
    You could check whether "Case sensitive" is switched on in your find/change dialog. Also check that your find format options are cleared. Click the "More Options" button if the find format options are not showing in the dialog.
    Regards,
    Malcolm

  • How can i find all instances of my device?

    Hi,
    I was wondering if anyone could tell me I can find all the instances of an ethernet card from a C program. At the moment I use a brute force approach, checking for each physical point of attachment by opening the driver /dev/mydriver and doing a putmsg DL_ATTACH_REQ with ppa= 0,1,2,etc., and checking to see if I get a DL_OK_ACK back.
    Is there any more intelligent way to find this out?
    Thanks in advance,
    S.

    Hi,
    #include <sys/ddi.h>
    #include <sys/sunddi.h>
    int ddi_get_instance(dev_info_t *dip);
    ddi_get_instance() returns the instance number of the device corresponding to dip.
    The system assigns an instance number to every device. Instance numbers for devices attached to the same driver are unique. This provides a way for the system and the driver to uniquely identify one or more devices of the same type. The instance number is derived by the system from different properties for different device types in an implementation specific manner.
    Once an instance number has been assigned to a device, it will remain the same even across reconfigurations and reboots. Therefore, instance numbers seen by a driver may not appear to be in consecutive order. For example, if dev-ice foo0 has been assigned an instance number of 0 and dev-ice foo1 has been assigned an instance number of 1, if
    foo0 is removed, foo1 will continue to be associated with instance number 1 (even though foo1 is now the only device of its type on the system).
    Refer more information man ddi_get_instance()
    Regards,
    Senthilkumar
    Technical Support Engineer
    Developer Technical Support
    Sun Microsystems, Inc.
    http://www.sun.com/developers/support

  • Find all instances in footage

    Is  there a way you can search for an instance of something in footage?  We  have footage of a photoshoot that I'm trying sync with the acutaly  stills.  I was hoping to figure out a quick way to place a marker on the  timeline for every strobe/flash.
    thanks
    shawn

    There's a script called "Magnum: the Edit Detector" (listed on this page) that will place a marker at every place where it detects an edit. The way that it works is that it looks for any abrupt change in the scene and places a marker there; it uses a frame-by-frame comparison to find these abrupt changes. I think that a flash might be enough to trigger the detection of such a change, if you have the sensitivity settings cranked way up. Even if Magnum doesn't work for you as-is, it gives an idea of the direction that you can go to do something similar---or even what script author you could contact.
    The expression method underlying Magnum's functionality is the sampleImage method.

  • Find bar doesn't find all instances

    Title says it all, really. When I look for text it isn't always found. See the image which is from http://www.hsqldb.org/doc/guide/databaseobjects-chapt.html#dbc_common_elements

    I get 4 results when I search for ''<identifier>'' on that web page.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • QUESTION: How can I locate all instances of a field in mult tables

    Hi all.
    So im just learning Oracle and I have an interesting question.
    I just learned how you can query things from multiple tables by using the tablename.fieldname in the select.
    My question is this. Lets say you have, oh, 100 tables and you have referenced a field like IDNUMBER in ten of the tables.
    Now I want to write a query to pull the ID number from those tables but I dont remember every table I used it in.
    How can you easilly find all instances of where a field is used in multiple tables? Im hoping I explained this right.

    791443 wrote:
    AWESOME!! THANKS!!You should be aware that this solution only works to the degree that columns are consistently named.
    Consider
    CREATE TABLE supplier
    (supplier_id      number       not null,
      supplier_name varchar2(50) not null,
      contact_name      varchar2(50),      
      CONSTRAINT supplier_pk PRIMARY KEY (supplier_id)
    CREATE TABLE purchase_order_hdr
      (purchase_order_id      number not null,
       supplier_number      number not null
       CONSTRAINT fk_supplier
       FOREIGN KEY (supplier_number)
       REFERENCES supplier(supplier_id)
    CREATE TABLE purchase_order_line
      (po_number             number not null,
       po_line_item        number not null,
       vendor_product_code number not null,
       CONSTRAINT fk_supplier
       FOREIGN KEY (supplier_number)
       REFERENCES supplier(supplier_id)
        );So, how do you catch that supplier.supplier_id is the same as purchase_order_hdr.supplier_number or purchase_order_line.po_number is the same as purchase_order_hdr.purchase_order_id?
    No, I don't have a solution, just pointing out that you may not be able to depend on a fully automated solution either. It depend on how rigorous your organization is about enforcing naming standards.

  • How can I find the instances of a subvi programmat​ically

    When one subvi appears for several times in the blockdiagramm, who can I get a ID number for every instance of the subvi?
    When I right-click on the subvi -> "Find all instances" then I get how often the subvi appears on the blockdiagramm but i need the information programmatically.
    Thanks for helping!
    Mathias

    LabVIEW won't let you save "DAsst_mxwScript_Get SubVI Refnums.vi" for a previous version of LabVIEW since its a "toolkit vi" if you try to do this with the "Save with Options" feature. However, LabVIEW *will* let you invoke the "Save for Previous" VI server method on toolkit VIs :-)
    Attached are the VIs saved in LV 6.1
    -Jim
    Attachments:
    Find_All_SubVIs_by_Name-6.1.zip ‏39 KB

  • How to design sequence number and sub sequence number

    Hi
    I am creating DMEE for bank file, there is sequence number and sub sequence numbers in the file.
    File structure
    Aaa name 0001 tax id amount
    Bbb name 00010001 dnum amt
    Bbb name 00010002
    Bbb name 00010003
    Aaa name 0001 tax id amount
    Bbb name 00020001
    Bbb name 00020002
    Could you please help me on how to design sequence and sub sequence number in DMEE structure.
    Regards,
    Guna

    Hi,
    please find seqence number and sub sequence number in below file structure.
    Aaa name 0001(Seq. num) tax id amount   -------------------------------------header
    Bbb name 0001(Seq.num)0001(sub seq num) dnum amt---------------- item
    Bbb name 0001(Seq.num)0002 (sub seq num) ---------------- item
    Bbb name 0001(Seq. num) 0003(sub seq num) ---------------- item
    Aaa name 0001(Seq. num) tax id amount                  --header
    Bbb name 0002(Seq. num)0001(sub seq num)---------------- item
    Bbb name 0002(Seq. num)0002(sub seq num)---------------- item
    TRL
    Please help me to design sub sequence number and sequnce number again in the item details.
    Best regards,
    Anji

  • How do I hide objects in all instances of a sub-form?

    I have a list of objects in a sub-form.  They are hidden or made visible depending on the selection of a drop-down menu outside the sub-form.  It works correctly for the first instance, but objects that are supposed to remain hidden become visible in all subsequent instances of the sub-form.
    How do I make the objects remain hidden in all instances of the sub-form?

    I think you want to move all the code from the change event of form1.EXP_Sample_Form.Identifier.Who.LOB_List.LOB_List to the calculate event of form1.EXP_Sample_Form.Bottom_of_Form. 
    Which would then look like;
    switch (Identifier.Who.LOB_List.LOB_List.rawValue)
        case "AmeriHealth Caritas":
            PCPInfo.Docs.SiteVisit.presence = "hidden";
            PCPInfo.Docs.Comments_SiteVisit.presence = "hidden";
            PCPInfo.Docs.SiteVisit_Received.presence = "hidden";
            PCPInfo.Docs.PanelAttestation.presence = "hidden";
            PCPInfo.Docs.Comments_PanelAttestation.presence = "hidden";
            PCPInfo.Docs.PanelAttestation_Received.presence = "hidden";
            break;
    Here is your form with this suggestion made, https://workspaces.acrobat.com/?d=koCEYxi-59F7n5iyIoMhGQ
    Bruce

  • Finding all the running instances of JVM

    We have to write a tool to upgrade an existing installation of our Java based application. For that we need to determine whether our java application is running.
    1. One way which I don't find that clean is listing all the processes on the machine and then find my application.
    2. Other option is using jps, but it is part of JDK and not jre, so that rules it out.
    Does java provide anything inbuilt to find all the running jvm on the host(something like jps)
    Thanks,
    Sumit

    We have to write a tool to upgrade an existing installation of our Java based application. For that we need to determine whether our java application is running.
    1. One way which I don't find that clean is listing all the processes on the machine and then find my application.
    2. Other option is using jps, but it is part of JDK and not jre, so that rules it out.
    Does java provide anything inbuilt to find all the running jvm on the host(something like jps)
    Thanks,
    Sumit

  • Using Property Loader in a sub-sequence with multiple invocations

    I'm using the Property Loader to load a different set of limits for each invocation of a sub-sequence. In my example, I have a sequence to do tests all the tests on a given RF band. But I want the ability to specify different test limits for each band.
    It wasn't hard to come up with an expression based on Parameters.Band to specify different Start and End data markers in the Property Loader step. So far so good.
    I don't necessarily want to override the same limits in every band. For one band, I might be happy with a default limit from the sequence file itself. Trouble is, if I don't specify a limit in the limit-file for a given band, then the limit loaded by the previous invocation of the sub-sequ
    ence is still in effect. This was a surprising behaviour. There's a huge opportunity for errors to creep in here, because the limit files may be edited by "lusers", and it's hard to explain this pitfall.
    Is there an easy way to make the limits reset to the sequence-file defaults before I call the Property Loader? Or alternatively, to make the loaded limits affect only the present invocation of the subsequence (the same way loading Locals only affects the present invocation?)
    BTW, I'm not actually using the official TestStand Property Loader, which I find too unwieldy. We wrote our own Property Loader. But the problem is common to both. Changes to RunState.Sequence.Main... persist across invocations of the sequence.
    - Ron

    Here I go, answering my own question again. For the benefit of anyone else who ever runs up against this...
    The trick is in the Sequence Properties dialog. Turn off "Optimize Non-Reentrant Calls to This Sequence". The little comment there makes it pretty clear that this is what's needed. I tried it, and it works.
    - Ron

  • "Diff Sequence File With" doesn't look into sub-sequences.

    Hello guys.
    I have these 2 sequences in Teststand 2.0 that I'm trying to compare, but when I use the command "Edit" - "Diff Sequence File With" it only looks in the upper level properties (MainSequence, FileGlobals, etc.) but it doesn't check for the contents inside the sub-sequences, which is where I have most of my measurements and tests.
    Hope you can help. Thanks.

    If you expand the 'Sequences' node, you should see the list of all the
    sequences from your file.  Then expand one of the Sequences and it
    should list the Context variables for those Sequences.  This is
    where you should see a comparison of the Locals set.  As a test,
    try comparing the Sequential (SequentialModel.seq) and Batch
    (BatchModel.seq) process models.  You can find them in the
    <TestStand>\Components\NI\Models\TestStandModels directory. 
    Perhaps you could post the two sequences you are trying to compare if
    you are still running into problems.
    Tyler T.

  • Fly reporting recording Begin and End of sub-sequences

    Hi,
    I've opted to use the Fly report option in T.S. 3.5 and have Excluded steps which Pass or are Done.
    I was expecting the test report to show only a report header and any Failed lines.
    However I find that the test report for a Passed unit includes lines recording the start and end of all
    the sub-sequences, e.g. :
    Begin example sub-sequence
    End example sub-sequence
    Any ideas how this detail can be excluded please.
    thanks,
    Gary.

    Gary,
    You would have to modify the relevant  report generation sequence file.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • How to get the values of all elements and sub elements from  following xml

    how to get the values of all elements and sub elements from following xml...
    <?xml version="1.0" encoding="UTF-8" ?>
    <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
    <TransactionID>TransactionID</TransactionID>
    <Match>
    <Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
    <List_Matched_Field>
    <FSFM_Matches>
    <NUMBER>NUMBER</NUMBER>
    <TERROR>TERROR</TERROR>
    <TU>TU</TU>
    <NAMEU>NAMEU</NAMEU>
    <DESCRIPT>DESCRIPT</DESCRIPT>
    <KODCR>KODCR</KODCR>
    <KODCN>KODCN</KODCN>
    <AMR>AMR</AMR>
    <ADDRESS>ADDRESS</ADDRESS>
    <SD>SD</SD>
    <RG>RG</RG>
    <ND>ND</ND>
    <VD>VD</VD>
    <GR>GR</GR>
    <YR>YR</YR>
    <MR>MR</MR>
    <CB_DATE>CB_DATE</CB_DATE>
    <CE_DATE>CE_DATE</CE_DATE>
    <DIRECTOR>DIRECTOR</DIRECTOR>
    <FOUNDER>FOUNDER</FOUNDER>
    <TERRTYPE>TERRTYPE</TERRTYPE>
    </FSFM_Matches>
    <OfacMatchDetails>
    <UID>UID</UID>
    <TITLE>TITLE</TITLE>
    <SDNTYPE>SDNTYPE</SDNTYPE>
    <REMARKS>REMARKS</REMARKS>
    <ID_UID>ID_UID</ID_UID>
    <IDTYPE>IDTYPE</IDTYPE>
    <IDNUMBER>IDNUMBER</IDNUMBER>
    <IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
    <ISSUEDATE>ISSUEDATE</ISSUEDATE>
    <EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
    <ADDRESS1>ADDRESS1</ADDRESS1>
    <ADDRESS2>ADDRESS2</ADDRESS2>
    <ADDRESS3>ADDRESS3</ADDRESS3>
    <CITY>CITY</CITY>
    <STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
    <POSTALCODE>POSTALCODE</POSTALCODE>
    <COUNTRY>COUNTRY</COUNTRY>
    </OfacMatchDetails>
    </List_Matched_Field>
    </Match>
    </List_AML_Finacle>

    avoid multi post
    http://forum.java.sun.com/thread.jspa?threadID=5249519

Maybe you are looking for