Find and replace in files does not refresh when changes are made
Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes
Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks
Similar Messages
-
AUTO POPUP OF NOTE CREATION WHEN CHANGES ARE MADE TO CUSTOMER/VENDOR
Hi,
When you change Customer/Vendor by VD02/XD02/MK02/XK02 there is the Object Services Toolbox for Object functions next to the title. I'd like the 'Create note' screen to popup as soon as the Vendor or Customer change is being saved. Can you help me?
Rgrds,
GyurkaHi,
When you change Customer/Vendor by VD02/XD02/MK02/XK02 there is the Object Services Toolbox for Object functions next to the title. I'd like the 'Create note' screen to popup as soon as the Vendor or Customer change is being saved. Can you help me?
Rgrds,
Gyurka -
My JSP file does not reflec the change of a Bean
My test environment: Win 2000, JDK 1.3.1, OC4J(standalone)
My problem:
In servlet, the change of a Strng value is reflected at the next refresh of a browser.
But, when a jsp file call a bean's getXXX(return a String value) method, and if the String value of that bean is changed, the next refresh or visit to that jsp file does not reflect the change of that bean.
For example:
1) TestClass.java
public class TestClass {
private String txt;
public class TestClass {
txt = "Test"; ----- (g
public String getTxt() {
return txt;
2) test.jsp
<html><body>
<h2>
<% TestClass test = new TestClass(); --(h
out.print(test.getTxt()); %> --(i
</h2>
</body></html>
In my first vistit to "http://localhost:8888/test.jsp" the brower shows "Test" String, but after I change the txt value to "Test1"((g) the brower does not reflect the change.
I found that if I use <jsp:useBean id="test" class="TestClass" /> instead of (h-(i line, the brower reflects the change of the bean.
Why does this occur?
Thaks in advance.
PS) In some cases(Not above example), I get the java.lang.ClassCastException.
So Each time I change a Servlet or a Bean, I restart OC4J.
nullSangKyu,
<jsp:useBean > has a property called scope, which defaults to "page".
So the bean gets reset everytime you reload the page.
Can I suggest that you set it to "session"?
The following syntax card I have found userful:
http://java.sun.com/products/jsp/syntax.pdf
Cheers,
Scott
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL] -
Image does not refresh when I undo
This seems only to happen when using my Wacom. A lot of friends have the same problem.
The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
Anyone else having this issue? It seems like a nasty bug to me.OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors. -
Hi.... i have downloaded and installed Lion. iTunes does not launch when I connect it to my mac. The correct box is ticked in 'Summary'. Any ideas? Thx. The same thing happens with my ipad.
Hi there Bry,
If you want to be able with out it syncing automatically, you can disable the automatic syncing feature following the instructions in the article below.
iTunes 11 for Mac: Require a prompt before automatic syncing
http://support.apple.com/kb/PH12120
Hope that helps,
Griff W. -
Upload and Download Errror " File does not contain valid data"
We are on the ECC 6.0 Unicode system.
I dowloaded the Role from QA server and tried to upload into DEV box.
I am getting the Error " File does not contain valid data".
However, when I downloaded the Role, it was done successfully.
Please let me know if anyone has that problem.
Thanks,
From
PRANAVThis is what I see here.
DATE 20090716 131756RELEASE 700LOADED_AGRS Z_BI_HR_REPORTING_FUNCTIONALAGR_DEFINE 210Z_BI_HR_REPORTING_FUNCTIONAL PTHAKER 20080523131557000000000000000PTHAKER 20090709142400000000000000000AGR_TCODES 210Z_BI_HR_REPORTING_FUNCTIONAL TRRRMX X 00000AGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000001S_RFC T-BD90003500 U O000004Authorization Check for RFC AccessAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000002S_RS_AUTH T-BD90003500 U O000013BI Analysis Authorizations in RoleAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000003S_RS_COMP T-BD90003500 U O000016Business Explorer - ComponentsAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000004S_RS_COMP1T-BD90003500 U O000023Business Explorer - Components: Enhancements to the OwnerAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000005S_RS_FOLD T-BD90003500 U O000029Business Explorer - Folder View On/OffAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000006S_RS_HIER T-BD90003500 U O000032Data Warehousing Workbench - HierarchyAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000007S_RS_ODSO T-BD90003500 U O000038Data Warehousing Workbench - DataStore ObjectAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000008S_RS_PARAMT-BD90003500 U O000045Business Explorer - Variants in Variable ScreenAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000009S_TCODE T-BD90003500 S O000009Transaction Code Check at Transaction StartAGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000001S_RS_COMP T-BD90003500 RSZCOMPTP CKF U O000021AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000002S_RS_COMP T-BD90003500 RSZCOMPID * U O000020AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000003S_RS_COMP1T-BD90003500 RSZCOMPID ZHCM* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000004S_TCODE T-BD90003500 TCD RRMX S O000010AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000005S_RS_HIER T-BD90003500 ACTVT 71 U O000033AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000006S_RS_HIER T-BD90003500 RSHIENM * U O000034AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000007S_RS_HIER T-BD90003500 RSIOBJNM * U O000035AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000008S_RS_HIER T-BD90003500 RSVERSION * U O000036AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000009S_RS_PARAMT-BD90003500 PARAMNM * U O000047AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000010S_RS_COMP T-BD90003500 RSINFOAREAZPA_ECM* U O000018AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000011S_RS_ODSO T-BD90003500 RSINFOAREAZPA_ECM* U O000040AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000012S_RS_COMP1T-BD90003500 RSZCOMPID ZPAOS* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000013S_RS_ODSO T-BD90003500 ACTVT 03 U O000039AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000014S_RS_COMP1T-BD90003500 RSZCOMPID ZPAPA* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000015S_RS_ODSO T-BD90003500 RSODSOBJ * U O000041AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000016S_RS_ODSO T-BD90003500 RSODSPART DATA U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000017S_RS_ODSO T-BD90003500 RSODSPART DEFINITION U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000018S_RS_ODSO T-BD90003500 RSODSPART EXPORTISRC U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000019S_RS_ODSO T-BD90003500 RSODSPART UPDATERULE U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000020S_RS_COMP T-BD90003500 ACTVT 03 U O000017AGR_1251 -
I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?command-option-esc keys and force quit Mail. Then relaunch.
-
IWEB does not delete old pages on .mac account when changes are made.
I deleted one "movie" page and added a different one via IWEB. I changed the name of the site. I saved it to a folder on my drive and updated the .mac account.
When I checked my .mac folder, WEB>Sites>IWeb contains a folder with the new site name. That folder contains each of the pages and associated folders, html's.
However, using a previously saved .html, I can still access the old named web site which contains the un-desired deleted page. That deleted page and the entire site funtion as though it was never removed.
This "removed site" and all its pages does not appear any place in the .mac account's file listings.
What is happening that I can't remove a page using the procedure listed in the IWEB documentation?
Anyone have any thoughts?However, using a previously saved .html, I can still
access the old named web site which contains the
un-desired deleted page.
Was the old site also produced by iWeb? Why are you "saving to a folder on your drive and updating the .mac account" instead of publishing directly into .Mac?
That deleted page and the
entire site funtion as though it was never removed.
This "removed site" and all its pages does not appear
any place in the .mac account's file listings.
Are you sure they are not in the Sites folder used by Homepage? What is the url?
If they really are not anywhere on your iDisk, then perhaps they are being cached somewhere and will eventually disappear. -
Ipod does not pause when headphones are removed
My Ipod touch 3g does not pause when playing music when my headphones are pulled out or removed. Can someone help with this problem? Thanks in advance
if a restore hasn't fixed it then it's probably a hardware problem. is it still under guarantee? you probably need to take it to apple.
-
Call-Off and Forecast Excel-File does not work anymore?
The Excel-file e-mail sent does not work any more (Excel says: "The following system error occured: .") when opened with Microsoft Office 2010, which I have on my new
computer with Windows 7 Professional x64.
The file is quite important for checking order and forecast quantities retrieved via OLAP-task from 101AS.
Many thanks in advance for your help.
ICT ASKNW
PS: When i use Excel 2007 all work fine. But when i clean Install Excel 2010 it wont work anymore. So but when i upgrade 2007 to 2010 it still working? Can it be true that a
file of the 2007 Edition is missing on 2010? Thanks for your help!Hi Sir,
Would you like to share us the whole error message? The following system error occured:... We need it to check the issue.
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
NW2004s: 0ANALYSIS_PATTERN drag and drop: Navigation pane does not refresh
Hi together,
I am wondering what's up with the 0ANALYSIS_PATTERN in the WAD.
When I execute a query and use the drag and dorp functionality to make a drilldown of a free characteristic to a row, the navigation pane on the left side ist not updated. It still shows the characteristic in the tab for the free characteristics and not in the part for the rows. Even when I do this action via the contextmenu it does not work.
In the old 3.x template this update works fine (ok, obviously not with drag&drop
Any ideas?
Greetings
StefanHello,
Please give your SPS (Java) and Patch level of BIBASES & BIWEBAPP.
Regards, Karol
SAP NetWeaver BI, Development -
ADFf 11g, view does not refresh when model changes
Hi,
I am really missing something about adf faces (jdev 11.1.1.3.0).
I have a web app, with jspx, tabpanels and pojo data controls.
Since there is a complex logic to open new pages/tabs, sometimes I have to open new pages/tabs programmatically, and also sometimes I have
to refresh the model behind pages/tabs programmatically.
When I say "programmatically" I mean that the model refresh is not started by an user action on the webpage, but is started by logic in the model layer
(say, for example, you receive a JMS message and you want to reload the content of an entire page).
I can succesfully update the model, using debug println I can see the model is updated, but there is no way I can update the view.
I tryed with the "addPartialTarget" code and so on, but it does not work.
I've also bought and read "Oracle JDeveloper 11g Handbook" and "Oracle Fusion Developer Guide", but I can't find anything that can help me.
Can someone explain me: what am I missing? I am sure there is some concept in ADF Faces I missed: this framework is too
big not to offer what I need, so I miss something for sure.
I hope to get an answer, I hope Shay reads this too.
Thanks all.Hi,
Active Data Services (chapter 20 in the book) is what would allow you to synchronize the screen with the model changes. The problem you face is because the data you see is what is stored in the iterators of the binding layer. An alternative solution to using ADS is to use an af:poll component that refreshes the display component when the model has changed. For this your model exposes a method that returns a time stamp that changes whenever the data has changed. Upon af:poll expiring, it calls a managed bean method, which - through the ADF binding layer - checks for the time stamp and compares it with a local saved copy (whenever the time stamp has changed, the client side will e.g. write it to the viewScope or pageFlowScope). If the time stamp has changed, the managed bean re-executes the method populating the iterator for the UI components and then issues a partial refresh of the component(s). Instead of PPR'ing each component in turn, you can try setting the ChangeEventPolicy property of the iterators to ppr"
This should solve the problem. The latter example is also explained in chapter 20, but for ADF BC
Frank -
FLV File does not play when published to my web server
Hi. I have created a short video in VC3 and selected the FLV option to create a web page. When I uploaded the entire file content to my web server (windows 2003 server hosted at Network Solutions) the FLV file will not play. Now... if I do the same with a WMV tile, the video plays.
You can view the file at
http://www.airforcehomeseller.com/videos/va_education/VATutorials/index.htm
We have another video published in WMV format, although the video vs audio sync is out of wack at the moment, at
http://www.airforcehomeseller.com/videos/Energy%20Pricing%20101/index.htm
What am I doing wrong?
Any help would be greatly appreciated.
G-IIHi again
You should probably double-check to ensure the standard.js file was also copied in when the HTML page was imported. It should be there but it never hurts to double check.
You might also perform a double-check to ensure things ended up in the correct folder (if you are organizing your project into folders). It could be that you moved the HTML page into a different folder and orphaned the JavaScript file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Mp4 file does not play when exported to swf?
I am putting together an interactive flash file that I have created in inDesign (CS4).
I have had no problems creating and exporting links, buttons etc, but when it comes to embedding video I am experiencing trouble..I have a video which I have converted to mp4 H.264 format, and there appears to be no problems when uploading but when I export, the video does not play, and there is just a black box in its place with no controls. I have tried converting the file into various other formats, all with no luck. I hope you can tell me where the problem lies!
Thank youSupport for placed videos in exported SWF was introduced in InDesign CS5 so it does not suppose to work with CS4...
-
IChart Trend does not refresh when NULL returned
I have a problem with an iChart displaying a trend. The chart receives data based on a selection from a dropdown box. Everything works fine as long as there is data, the trend updates correctly for the line selected from the dropdown. If, however, you select a line that is down, no current data available, then the iChart continues to display the trend from the last selection. These are based on a query that runs when a new selection is made and a button clicked.
When the page is first opened the iChart is blank until a selection is made. If the frame is refreshed, it refreshes the iChart to a blank state until a selection is made. What we need it to do is reset it to blank when no data is returned from the query, rather than caching the previous trend.
Any suggestions greatly appreciated.Mark,
Three dashes (---) and 12/31/1969 dates are an indication that the InitialUpdate has been suppressed for the chart, meaning it doesn't run the query template. Because the query is time based, but does not actually run the query it has 'null' dates to display for the start and end.
There is currently no way to use JavaScript to tell the iChart applet to revert back to this state. Your best alternative may be to run a query that returns no values to display (something that doesn't produce a FatalError, which would lead to the 'No Data Available' message).
Regards,
Jeremy
Maybe you are looking for
-
DrawImage takes long time for images created with Photoshop
Hello, I created a simple program to resize images using the drawImage method and it works very well for images except images which have either been created or modified with Photoshop 8. The main block of my code is public static BufferedImage scale(
-
Random Display of Photo's in a Slide Show
Does anyone know of a way to make iPhoto display photographs randomly in a slide show? I have been looking for a "shuffle" feature similar to iTunes but can't seem to find one.
-
What is rfc of creating relationship between ibase and partner?
I need bapi or rfc for assign a partner to ibase. create relationship between ibase and parten. pls.
-
Question about iSight bulit in camera: please help!!!
can the built in iSight be used with msn messenger as a webcam
-
Where is your customer service?
I had a repair appt today to replace a defective jack in my bedroom. First they told me they would be there 9-6, then it was 8 - 5 and then 8-8. Guess what they never showed up and when I called them they said it was because it was an outside wire p