Find and replaced disabled in Reports 10g

Hi,
I've noticed that in Reports 10g, the 'Find and Replace' and 'Find and Replace in PL/SQL' options tool under the Edit menu cannot be accessed until you open a program unit. Is this a bug ?
In previous versions of the reports builder, I didn't have to open a program unit to bring up this tool.
My version is Report Builder 10.1.2.0.2.
Thanks.

Any answer ??

Similar Messages

Find and replace in files does not refresh when changes are made

Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes

Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

In the new Numbers, can I find and replace within formulas like I used to in Numbers'09?

I use Numbers with quite long formulas with reference to other tables. With Numbers'09, it was extremely useful to copy formulas and then use "find and replace" to change the terms within.
Did they remove this option? I don't seem to be able to do that with the new Version.
If it's still there, where do I find it?
If it's not there.... why would they remove it.
Thanks

Basically, I use it for payroll, taxes, and so on... I have one sheet per employee (which compiles their weekly payroll). I have then different sheets which makes the quarterly taxes calculation (state and federal taxes - 941, 940, W2, disability, UI, paystubs, tracks payments and deadlines, etc... ). It took me awhile to write all of the formulas, but now it does everything for me.
When I add an employee. I have to add a sheet, but also add a line in the calculation sheets. Because all the employee sheets are the same format, all I need to do (or used to now) was to copy the line above, and just change the reference name of the employee sheet within the formula (because there are several terms that are looked up, the reference name comes several time in the formula)... changing it manually is really annoying. What was taking me a minute or so, before, now takes me about 20 minutes. (between the different sheets, there are about between 75 to 100 changes in formulas per new employee - so the "find and replace" in formula only, was extremely useful).

How to prevent find and replace from finding linked files?

I have a bunch of ASP pages that I need to update in the same manner with Find and Replace. In order to do this, I open all the files, use Find and Replace, and choose to Replace All in the Source Code of Open Documents.
Pretty straightforward, right? Except, if I have any include file statements, such as this:

DW opens these files on its own, and updates THEM as well.
This is a very frustrating behavior. I have been through the Preferences several times and I'm just not seeing any way to turn this off.
I have tried Googling this problem, and have seen absolutely no mention of it.
Does anyone know if this annoyance can be disabled?
Thanks.

I would try selecting the specific files in the Files tab, then using "Selected Files in Site" and see what happens.
I think DW considers related files to be "open" (since you can edit them from within the main file they are related to) when that option is turned on and the files they're related to are open.

How can I multi-find and replace relative paths to external topics?

I am using RH7 and publishing to a company server share. External topics are saved on the same server share and linked on my local drive to create a relative link. How can I do a multi-find and replace on the relative links to change the path to the external docs? The paths do not show up in the Topics List because they are relative, not absolute. Although changing all of the many paths manually would be job security, I would like an easier fix. Thanks for any help.

Hello again
Likely your best bet at this point is to use a good Multi-File Find and Replace utility.
While RoboHelp has one included, it often fails. So we typically recommend something like FAR (Find And Replace) or BKReplace.
Click here to visit the FAR site
Click here to visit the page for BKReplace
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Find and Replace with User Defined Variable

I am in the process of converting some legacy help content to RoboHelp HTML 9 in order to give it some more features and customization for our clients. I have been taking advantage of User Defined Variables in order to customize the content. Up to this point I have been manually going through each topic and replacing each instance of a word ("statements" for example) with a user defined variable saying the same thing but with the possibility of being changed later should the customer want to. Though we only have about 200 topics, this is still relatively time-consuming and I would like to automate this as much as possible.
Is there any way to find and replace content with a User Defined Variable?

Hi there
If you open the Script Explorer pod I believe one of the sample scripts is a "UDV Converter" script. Perhaps you could give that a try.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Find and replace smart quotes with straight quotes?

I understand I can turn off smart quotes so that I can type straight quotes, but I need to replace hundreds of curly smart quotes with straight quotes, is there a feature that will let me do this? I am using FM8.
Thanx,
Willian

I am using FM9....so I don't know if the same shortcuts apply, but this is what I found out last week.
Use the Find and Replace tool:
With smart quotes turned off and the Num Lock key turned on:
Alt0147 will give you beginning quotation marks
Alt0148 will give you ending quotation marks
In the Find box use ALT0147 or ALT0148 for the beginning or ending quotes. When you click in the box and type
one of the shortcuts the correct quote will be shown in the box.
In the replace box type the regular straight quotes on your keyboard.
I was thrilled that it would work!...course you do have to do them separately and be careful not to replace the curly quotes
that you want to leave in your document.
Hope this helps using FM8....
ls

Use VBA and Excel to open Dreamweaver HTML (CS5), find and replace text, save and close

I wish to use VBA and Excel to programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the code view of these files, save and close them.
I have 5000 associations between Find: x0001 and Replace: y0001 in an Excel sheet.
I have the VBA written but do not know how to open, close and save the code view of the ####.html files. Please ... and thank you...
[email protected]

This is actually the code view of file ####.html that I wish to find and replace programmatically where #### is a four digit number cataloguing each painting.... In 1995 I thought this was clever... maybe not so clever now :>)) Thank you for whatever you can do Rob!
!####.jpg!
h2. "Name####"
Oils on acrylic foundation commercial canvas - . xx X xx (inches) Started
Back of the Painting In Progress </p> </body> </html>
Warmest regards,
Phil the Forecaster, http://philtheforecaster.blogspot.ca/ and http://phils-market.blogspot.ca/

How do I find and replace text in PHP files?

How can I in CS3 make sitewide changes to the text in PHP pages without changing variable names etc that have the same name?
For example if I have an installation of a PHP forum and I want to change every instance of the word 'forum' to 'message board'...
If I used the 'inside tag' search with " as the tag, then if "" contained a variable called 'forum' it would also be changed and therefore corrupt the code....
Is there a simple way around this?
Thanks!
I'm using CS3 on Windows Vista.

It looks like you're trying to find and replace source code, so you may be able to look at the various places that are looked at when finding and uncheck the ones that don't apply.
But, if it's all source code then that won't help. One thing that may work is to expand the search option - for example if the work "forum" that you're wanting to change it preceded by another word, or character or something that sets it apart, then do you find on that. You can expand that search phrase as far out in either direction that you need to to make it different, if of course that is practical in your situation.
The only other way I can think of is to somehow create an exception rule, but I'm not sure if that's possible or how to do it.

Find and replace in RTF Template

Hi,
I'm using a if statement in my template, but i need to change a value within this statement. It's being used multiple times, therefor it would be easier to do a find and replace, is there a way to do a find and replace within the RTF template? Already openede it in Notepad++, but no luck
Osman

I don't think there is a way to find and replace all.. You can view all the code by using Field Browser -> Show All and then replace the code and update one by one from there..
Thanks,
Bipuser

XML tag markers moved: Find and Replace causing problem in xml elements

Hi All,
I am doing find and replace using GREP. While using the expression like $1, $2 (Found Items) in the change to field it changes the placement of tag marker. If the found item is a part of two of more xml elements, I am getting a serious problem while replacing it. (ie. The xml tag markers are moved.)
See the screen shot below, then you may get better idea. And help me to overcome this issue.
This is just an example to show you what i'm trying to say, there are so many cases like this.
Original text/ Before doing find replace
After replacing
Green4ever

Hi Peter and John,
but it seems to me that the example is looking for any space that
follows a semi-colon and has two word characters following it, and
repalce that with an em space. I think you could do the same using look
behind and look ahead and not need to replace the found text.
Yes you are right about the look behind and look ahead. I'd like to show some more examples to show what the actual problem is,
Original/Before Replacing,
(Consider there is another case here, instead of em-space some times normal word space will also be there)
Using the Grep:
Find What---------> ^(\d+\.(?:\d+)?)~m
Change To------------->$1\t
After Replace:
Did I make any sense? Eventhough this will not make any changes in the layout, my requirement is to insert the tab out-side the tag marker not indise.
Green4ever

Find and replace value in Delimited String

Hi All,
I have a requirement, where i need to find and replace values in delimited string.
For example, the string is "GL~1001~157747~FEB-13~CREDIT~A~N~USD~NULL~". The 4th column gives month and year. I need to replace it with previous month name. For example: "GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~". I need to do same for last 12 months.
I thought of first devide the values and store it in variable and then after replacing it with required value, join it back.
I just wanted to know if there is any better way to do it?

for example (Assumption: the abbreviated month is the first occurance of 3 consecutive alphabetic charachters)
with testdata as (
select 'GL~1001~157747~FEB-13~CREDIT~A~N~USD~NULL~' str from dual
select
str
,regexp_substr(str, '[[:alpha:]]{3}') part
,to_date('01'||regexp_substr(str, '[[:alpha:]]{3}')||'2013', 'DDMONYYYY') part_date
,replace (str
         ,regexp_substr(str, '[[:alpha:]]{3}')
         ,to_char(add_months(to_date('01'||regexp_substr(str, '[[:alpha:]]{3}')||'2013', 'DDMONYYYY'),-1),'MON')
) res
from testdata
STR
PART
PART_DATE
RES
GL~1001~157747~FEB-13~CREDIT~A~N~USD~NULL~
FEB
02/01/2013
GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~
with year included
with testdata as (
select 'GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~' str from dual
select
str
,regexp_substr(str, '[[:alpha:]]{3}-\d{2}') part
,to_date(regexp_substr(str, '[[:alpha:]]{3}-\d{2}'), 'MON-YY') part_date
,replace (str
         ,regexp_substr(str, '[[:alpha:]]{3}-\d{2}')
         ,to_char(add_months(to_date(regexp_substr(str, '[[:alpha:]]{3}-\d{2}'), 'MON-YY'),-1),'MON-YY')
) res
from testdata
STR
PART
PART_DATE
RES
GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~
JAN-13
01/01/2013
GL~1001~157747~DEC-12~CREDIT~A~N~USD~NULL~
Message was edited by: chris227 year included

Using applescript for Find and Replace All in Pages 2.0

i saw that Pages 2.0 is scriptable
i try to create a script for merge use to find and replace all occurence of a certain string using a script but Pages doesn't seems to respond to "Find" even using "System Events"
how can i do to use this function with a script
Thanx for any help
S.B.
ibook G3 Mac OS X (10.4.6)

OK, here's another example. This one gets the text as a string and uses the offset property to find "[", presuming it to be a merge delimiter. (Pages' text doesn't support "offset of").
One failing of this scheme is that the offsets are incorrect if you have inline objects (pictures, shapes, tables, etc.). While it is probably possible to compensate for them, that's a trickier proposition.
<PRE>-- Example merge replacements:
property mergeText : {"[name]", "John Smith", "[address]", "1234 Anystreet"}
on lookup(mergeWord)
set theCount to count of mergeText
repeat with x from 1 to theCount by 2
if item x of mergeText = mergeWord then
return item (x + 1) of mergeText
end if
end repeat
-- If merge field is not found, delete it (replace it with the empty string)
return ""
end lookup
tell application "Pages"
repeat
tell body text of document 1
-- Get text as a string so that "offset of" can be used.
set allText to it as string
set startOffset to offset of "[" in allText
if (startOffset = 0) then
exit repeat
end if
set endOffset to offset of "]" in allText
select (text from character startOffset to character endOffset)
end tell
set mergeWord to contents of selection
tell me to lookup(mergeWord)
set replacement to result
set selection to replacement
if (replacement is "") then
-- Get rid of extra whitespace (space or return)
-- Do it in a "try" block to handle edge cases at start or end of text.
try
set theSel to (get selection)
set ch1 to character before theSel
set ch2 to character after theSel
if ((ch1 is " " or ch1 is return) and (ch2 is " " or ch2 is return)) then
select character after theSel
delete selection
end if
end try
end if
end repeat
end tell</PRE>
Titanium PowerBook Mac OS X (10.4.6)

Dumb Q: problem with Find And Replace window in Flash 8

Dear Flash Group,
apologies if this is trivial, it's my first day using Flash.
I downloaded a Flash project from
http://www.flashorb.com/articles/benchmark_files/flash-benchmark.zip.
This
flash calls into a web service at localhost:8080. I used the
'Find and
Replace' window within Flash Professional 8 to locate the
string
'localhost:8080' and replaced it with plain 'localhost'.
However, when I 'Debug the Movie' (Ctrl-Shift-Enter), it
still tries to
access port 8080! Obsiously, my replace command did not do
what I thought it
would do. I opened the FLA file in a binary editor, and saw 4
more
references to 8080, One if them in 'Properties' of a
WebServicesConnector,
but I cannot figure out how to find the other occurences.
Checking on google, I see lots of people having similar
problems, but no
solutions
Any ideas?
Regards, /george
PS. What do you guys do for code completion - is there a tool
that would
bring Flash on par with an professional IDE?

george,
> when I 'Debug the Movie' (Ctrl-Shift-Enter), it still
> tries to access port 8080! Obsiously, my replace
> command did not do what I thought it would do.
Agreed.
> I opened the FLA file in a binary editor, and saw 4
> more references to 8080, One if them in 'Properties'
> of a WebServicesConnector, but I cannot figure out
> how to find the other occurences.
Might they be the result of that WebServicesConnector
reference?
> Checking on google, I see lots of people having
> similar problems, but no solutions
That's really odd, actually. I'm on these boards every day,
and I've
never heard of this issue. I don't *think* the Find/Replace
dialog visits
panel contents, such as the Component Inspector panel, but I
wouldn't swear
to that.
> What do you guys do for code completion - is there
> a tool that would bring Flash on par with an
professional IDE?
Well, Flash is a professional IDE, of course. By definition,
if you pay
for something, you have acquired a professional product or
service. I know
what you mean, though. Flash itself rocks, but the Actions
panel can be
glaringly weak. Personally, I use SE|PY to edit ActionScript.
http://www.sephiroth.it/python/sepy.php
Sorry I can't speak to your other issue. :-/
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Folder action to find and replace text and change line feeds

I want to use a folder action to find and replace text and change Mac carriage returns to DOS line feeds inside text files.
The text to be replaced is: "/Users/wim/Music/iTunes/iTunes Music/Music" (without the quotes)
This text has to be removed (i.e. replaced by an empty string)
The text occurs many times within each file.
The files are playlists exported from iTunes in the M3U format (which are text files). They contain Mac carriage returns. These need to be changed to DOS line feeds.
I have found the following two perl commands to achieve this:
To find and replace text: perl -pi -w -e 's/THIS/THAT/g;' *.txt
To change carriage returns to line feeds: perl -i -pe 's/\015/\015\012/g' mac-file
I know that it's possible to make a folder action with Automator that executes a shell script.
What I want to do is drop the exported playlists in M3U format in a folder so that the folder action will remove the right text and change the carriage returns.
My questions are:
Is it possible to make a folder action that executes command line commands instead of shell scripts?
What is the correct syntax for the two commands when used in a folder action shell script? Especially, how do I escape the slashes (/) in the string to be removed?
Thanks for your help

Ok, I've include an applescript to run a shell command. The applesript command quoted form makes a string that will end up as a single string on the bash command line. Depending on what you want to do, you may need multiple string on the bash command lines. I've included some information on folder actions.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set desktopPath to (path to desktop) as string
    log "desktopPath = " & desktopPath
    set unixDesktopPath to POSIX path of desktopPath
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "ls -l " & quotedUnixDesktopPath
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run
How to set up a folder action.
1) right click on folder. click on Enable folder actions
2) Place script in
/Library/Scripts/Folder Actions Scripts
3) right click on folder. click on attach folder action
pick your script.
Create a new folder on the desktop & try.
You can put multiple folder actions on a folder. There are other ways of doing this.
Here is my test script:
on adding folder items to this_folder after receiving dropped_items
    repeat with dropped_item_ref in dropped_items
       display dialog "dropped files is " & dropped_item_ref & " on folder " & this_folder
    end repeat
end adding folder items to
How to make the text into an AppleScript program.
Start the AppleScript Editor
/Applications/AppleScript/Script Editor.app
In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
Copy the script text to the Applescript editor.
Note: The ¬ is typed as option+return. ption+return is the Applescript line continuation characters.
You may need to retype these characters.
Save the text to a file as an script and do not check any of the boxes below.

Find and replaced disabled in Reports 10g

Similar Messages

Maybe you are looking for