FIND BADI OR USER EXIT FOR TRANSACTION CORK -STEP SAVE CONFIRMATION
Hi all .
I need to find a badi or user exit to make some w/h movements on action "save confirmation"
in transaction CORK .
Please ,your help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Helena
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving
No of Exits: 24
Similar Messages
-
BADI or User Exit for Transaction CK 24
Hi Experts ,
I need to do some customization as per my client requirement , once CK 24 transaction get executed .
For that i am searching for a BADI or User exit that is being triggered after execution of the transaction CK 24 .
Can any body please help me on this to find a BADI or User exit on the same . Ihave tried all the basic methods for fidning the same .
Good points will be rewarded on the solution .
Regards
SarmisthaSD,
Am afraid to say there is no exit or BADi for same.just ask access key for program than change where you want.
Amit. -
BADI or USER EXIT for Transaction F-02
Hi All,
I had requirement from end user to add two customer fields on screen for transaction F-02 at header level. For which end user will input some values which needs to maintain in BSEG and further use for reporting purpose.
Is there any USER EXIT (Screen exit) or any BADI available for this requirement?
I tried using BADI FI_HEADER_SUB_1300 . Can I get some guideline how to implement this BADI ?
Thanks in advance.
Regards,
Meenakshi.User-exists:
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic Correspondence
SAPLF051 Workflow for FI (Pre-Capture, Release for Payment) -
Process to find user exit for transactions /sapapo/snptlb or /sapapo/sdp94
Hi All,
Can you help me out with the approach to find out user exits for transactions /sapapo/snptlb or /sapapo/sdp94?
What I am looking for is the approach, i mean how to proceed with?
Win full points for detailed answer !!
Thanks a lot - ChandanHi Chandan - this is the same as in any module of SAP:
1) check SPRO
If nothing is found then do the following:
1) Goto SE24 and display class cl_exithandler
2) Enter method GET_INSTANCE and create a break point at Line 25 (CASE sy-subrc)
3) Execute SAP standard transaction and invoke the process for which you need to create custom coding
4) Your break point will stop the process in debug mode - check the values of variable 'exit_name', it will contian the name of the BADI currently being executed.
5) Continue to debug by pressing F8 to see other BADI's
6) Repeat steps 3 thru 5 for each process that you want to find a BADI for
Regards
Andy -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
BADI/USER Exits for Transaction PPOME
Hi,
I need to add a new tab in the transaction PPOME under Details of Org Unit section and maintain some fields in that tab through some custom table. As of I know this can be done through BADIs or User Exits of that transaction.
Can somebody guide me in getting the BADIs and User Exits for this transaction?
Also share some information of how we can achieve this?
Regards
Somuwhy you not seeing this:
Adding a new tab in PPOME
sorry i missed to mention not
Edited by: pr@t on Mar 3, 2009 1:04 PM -
Badi or user exit for changing currency INR to EUR
hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu -
User Exit For Transaction F150 (Dunning)
Hi All,
Can any one help me in finding a User Exit for Transaction <b>F150</b> (Dunning).Hello,
Try this one
F150D001
Bye
gabriel -
How to find the exact user exit for our requirement?
Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
<b>How to find the exact user-exit for your requirement.</b>
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
<b>The procedure to find the package name.</b>
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
<b>Checking if the user-exit is getting triggered or not.</b>
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
Badi or user-exit for QA32 after save
I need a badi or user exit to execute exactly after save in QA32 ..I tried belows but they are not that i want
QPL1_SUBSCREEN_ADDON
INSPECTIONLOT_UPDATE
Check these Exits:
QEVA0004 Exit for changing information line in usage decision he
QEVA0005 User subscreen for displaying add. data for usage decis
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetti
QEVA0008 Usage decision: Customer function key (e.g. to cancel U
QEVA0009 UD: Predefinition of quantity to be posted to sample st
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print reportHello Tuncer,
have you checked the BADI QE_SAVE? This is the last possible chance of changing data on saving a QM transaction and should be active in QA32.
The only other solution I can come up with is a follow-up action i.e. for the UD-code
Hope this information proves usefull.
Regards
Isabelle -
BADI or User Exit for Txn : CRMD_ORDER
Hi Experts,
Is there any badi or user-exits for the transaction crmd_order.
regrads,
arul jtohi aDear Arul Jothi,
BAPI_ACTIVITYCRM_CREATEMULTI
BAPI_BUSPROCESSND_CREATEMULTI
CRM_BUSPROCESSND_BAPI
CRM_LEADCRM_BAPI
BAPI_LEAD_CREATEMULTI
CRM_OPPORTUNITYCRM_BAPI
BAPI_OPPORTUNITY_CREATEMULTI
CRM_SLSTRANSACTCRM_BAPI
BAPI_SLSTRANSACT_CREATEMULTI
Also, visit the following thread:
Change status for sales order in crmd_order
BAdi/Enhancement:
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Regards,
Naveen. -
Hi Gurus,
I am looking for BADI's or User exits for transaction ME23n.
Exactly I am looking for BADI or user exit for the release strategy for the PO and then mailing it to th e apporover.
regards
kanishkadear ,
check out these two badi it may be useful for your requiremrnt
ME_RELEASE_CREATE
SMOD_MRFLB001
Cheers
fareed -
User exit for transaction CK11N
Dear all,
can any body please tell me any user exit for transaction ck11n.
i want to terigger the exit when the save button will be pressed in the ck11n transaction.
i have found one exit "EXIT_SAPLCK21_002" but it is not triggering after save button is pressed.
so please tell me if any other user exit is there to suit my requirement.
thanks
prabhuduttahi,
found the following BADI
check them
COSTINGRUN_CK Edit Costing Run
COST_APPORTION_CK Maint Apportionment Structure Joint Production: Dist Rules
CO_PROD_COSTING_CK Cost Management for Joint Products (Costing, Target Costs)
DATA_EXTENSION_CK For Data Enrichment in Product Costing
DYNPRO_EXTENSION_CK BAdI for Interface Enhancement in Costing
ORDER_COSTING_CK Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK Enables Quantity/Structure Changes in Costing
SUR_STOCK_TRANSF_CK Overhead on Materials with Stock Transfer Between Plants
CK_KALAMATCON2_CI BAdI for CI Fields for Table KALAMATCON2
VALUATION_CK BAdI for Valuation in Product Costing
Regards -
How to find the appropriate user exit for invoic02 idoc in idoc_output_invo
Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM
Maybe you are looking for
-
Pc or Mac for Uni please help!
I start uni soon my old toshiba is soon dead. I need a computer. I would love a macbook or macbookpro. The uni has some softwares - open uni - which are pc only. They recommend Pc. Now with a mac would I be ok? Like i know you can out windows on it ,
-
"Disk Too Slow..." problem solved...for me
Lately my Macbook and Logic have been driving me nuts with the "Disk Too Slow" error message. But I notice it was happening on one particular song. I'll cut right to the chase....delete unused tracks. After doing this the song played thru without a p
-
How to trigger the workflow from RFC
Hi, I need to trigger a workflow from a RFC.How can I call the event and start my workflow? How can i do this? please advice. Thanks, Anand
-
Can't Activate changes after adding a few Watches/Notifications
Hello, I've been setting up some WLDF modules on our servers for the first time. On several of my servers I will randomly get errors when I try to Activate and changes that I've made in the Diagnostic Modules section of the Console. It hangs and I ge
-
OSB, xquery and Assign issue
Hello all I have an issue that I cannot quite understand... I have a very simple proxy service, that I would like to receive an xml of this form: <SO so_att1="soatt" xsi:noNamespaceSchemaLocation="Split.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchem