Find common customers in two different comp codes
Hi all,
How to find the common customers in two different company codes without writing a code/program?
thanks in advance
regards
PP
Not an ABAP question, nevertheless, look at menu Accounting, Financial Accounting, Accounts Receivable, Information system, Reports for Accounts Receivable Accounting, Master Data, S_ALR_87012195 - Customer Master Data Comparison.
Another answer would be: create a query via SQ01, or report writer.
Regards,
Raymond
Similar Messages
-
How to enter invoice with two different tax codes in one line?
Dear friends,
I have this PO for which I enter the invoice.
I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
How can I enter in one row in MIRO a debit with two different tax codes.
Thank you.I want in the same line item to enter two tax codes.
Do you Know if there is any way to do this?
It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
How can this be done?
Thank you? -
Using Same Bank Account for two different company code
Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank accountThe system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon -
Inter company STO wtih two different company codes
Hello expert,
I am doing inter company stock transfer between two plants that belongs to two different company code. Can someone tell me if my settings are correct
Plant-A (S.org- X, DC-10, D-00) and CC-A
Plant- B (S.org-Y, DC-10, D00) and CC-B
Deinfe shipping data for Plant u2013A
u2022 Plant u2013A
u2022 Customer u2013B
u2022 Sales Org-X
u2022 DC 10
u2022 D 00
u2022 Under Control data tab, Vendor = A
Define shipping data for plant u2013B
u2022 Plant u2013B
u2022 Customer u2013A
u2022 Sales Org-Y
u2022 DC 10
u2022 D 00
u2022 Under control data tab, Vendor = B
Customer Master for Plant -A
u2022 Customer-A
u2022 CC-B
u2022 S.org-Y
u2022 DC -10
u2022 D-00
Customer Master for Plant -B
u2022 Customer-B
u2022 CC-A
u2022 S.org-X
u2022 DC -10
u2022 D-00
Vendor Master for Plant u2013A
u2022 Vendor u2013A
u2022 CC- B
u2022 P.org = 1000
u2022 Additional purch data/Extrac = A
u2022 Under control tab, Customer = A
Vendor Master for Plant u2013B
u2022 Vendor u2013B
u2022 CC- A
u2022 P.org = 1000
u2022 Additional purch data/Extrac = B
u2022 Under control tab, Customer = B
When i try to create a STO with document type NB, it says shipping data can't be determinded. Ofcourse , the material is being maintained for both plant with sales data. thank you so much for ur help.this is because of of shipping point is not determined, maintain shipping point for the following combination
1)The shipping conditions from the customer master record (Shipping screen)
2) The loading group from the material master record (Sales/Plant Data screen)
3)The delivering plant
Regards,
Bala -
Billing in Stock Transfer between two plants of two different company codes
Hi Friends,
I am doing the scenario of stock transfer between two plants of different company codes.
I have some issues in Billing for this..
What are the settings do i need to to for Pricing in SD point of view.
Ex:
Supplying / Receiving
Com.Code:2000 / CompanyCode:1000
Plant:2100 / Plant:1100
SA:2000/10/00 / SA:1000/10/00
I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
I created Vendor 7777 and assigned Supplying Plant 2100 in add purchasing data.
In IMG Settings:
Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
In Supplying Plant i assigned customer blank and sales area as 2000/10/00
Create Checking Rule: Standard(B SD Delivery)
Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
What are Pricing settings in SD i have to do?????????
Process:
ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
I have gone through many threads in Forum but confusion in Pricing Part..
Some are mixing with the inter company sales proces..
Pls guide me..
With RegardsDo the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur -
Is it possible to use same sap script for different comp code with difflogo
I have 3 company codes. I need to use same sap script to all but each company code has different logo. I dnt want to go for 3 different sap script. Is it possible to change in coding
like this
If comp code = '100'
print ' logo1'
If comp code = '200'
print ' logo2'
If comp code = '300'
print ' logo3'
in same sapscript.If yes how ?Hi,
Yes you can do it.
In Sap Script use:-
/: If Comp code='100'
INCLUDE ZHEX-LOGO100 OBJECT TEXT ID ST LANGUAGE EN
/:Elseif comp code = '200'
INCLUDE ZHEX-LOGO200 OBJECT TEXT ID ST LANGUAGE EN
/:Else
INCLUDE ZHEX-LOGO300 OBJECT TEXT ID ST
LANGUAGE EN
/:Endif
I hope this helps,
Regards
Raju Chitale -
Finding the data between two different substrings in a string
Hey guys-
This is probably really easy for someone...I can't figure it out with CF. I've searched a bunch but haven't found exactly what I'm looking for.
I'm searching a HTML document with Coldfusion and need to pull some data from it. Just as a quick example, somewhere in the HTML document there might be some code that looks like (this is obviously super simplified):
<tr><td>Grand Total: </td></tr><tr><td>$1000.00</td> </tr>
I need to do a couple of things. 1) I need to capture the $1000.00 (this amount is dynamic, it will be different on every HTML doc) 2) I need to delete the whole row (or two rows in this example).
I'm guessing it's something along the lines of setting " <tr><td>Grand Total:</td></tr><tr><td> " to a variable, then searching for everything after until it finds </td> and storing that as a variable.... and then for step two storing everything from the <tr><td>Grand Total:</td></tr><tr><td> to the next </tr> as a variable, and then using Replace to take it out of the document. I just dont know how to do the "capture everything from 1 pre-established variable to the next time the code has variable number 2 (in this case, either </td> or </tr>) part.
Any thoughts or help would be so greatly appreciated!
Thanks all!!
JEThanks ilssac...that's definitely helpful, as you said..mine is a little more complex as I need to find a pretty specific line of code and then find the next </td> after (actually, find all of the content between those two).
Any other thoughts? I KNOW someone else has done this. Parsing out HTML documents to capture different pieces of info has to be relatively common....
Thanks! -
Running two different VI codes simultaneously
Hello guys
I am conducting a study in which I am required to run multiple codes for different harwares simultaneously, I have the vi codes for them, I am looking for suggestions on how I can integrate them in such a way that all of them run simultaneously, can I use "Sync" option provided in the pallate.
Please suggest
Thanks in advance
Best
Deependra
P.S- All the hardwares are independent and I am not using any chassis to sync them externally, I only need to integrate the vi codesAre you just reading from the EMG and force plate?
I'm not hearing anything that says you need absolute synchronization. So I would just run them as two separate subVIs. You will want to get away from the example and use the actual driver VIs. If they both are just reading, them put then in the same loop. Read the EMG then read the force plate. Do whatever with the data and loop through it again. This usually works well as a Queued Message Handler.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How to find common fields between two tables
Hi friends,
Is there any way to find out common fields between tables and linking the tables based on common fields.
Thanks and Regards,
Chitty.Hi Chitty,
Try using joins it will give the fields which are only common to both the fields.
Here s an example,
SELECT mara~matnr
marc~werks
INTO TABLE t_material
FROM mara AS mara INNER JOIN marc AS marc
ON maramatnr = marcmatnr
WHERE mara~mtart = p_mtart.
Much Regards,
Amuktha. -
Can I use Find IPhone app with two different itunes accounts?
I have a "main" itunes account. Daughter just got a new iphone but she has a new itunes account (different from mine). Can I use the app "Find iphone" with both phones? I cannot seem to be able to "add" her to my app.
Thanks
Buckeyechic83BuckeyeChic83 wrote:
I have a "main" itunes account. Daughter just got a new iphone but she has a new itunes account (different from mine). Can I use the app "Find iphone" with both phones?
Yes.
Simply load the app onto her iPhone.
Note that the app allow you to find a different iPhone. You can use it to locate your own iPhone but if your own iPhone is in your hands and you are using the app...
Anyone can us the app to log into their own iCloud account and find their own iPhone (ie.You use her iPhone to locate your iPhone and vice-versa). -
Find my friends in two different device but 1 ID
just upgrade both my ipad 2 and my iphone 4 to ios5. What i am trying to do is have my both ios devices listed on each other on find my friends, but the problem is i use same apple ID in the both device. So technically can it be done? Is so, please help me in how to setup it ?
thanks,
~kennythanks alot.. works very well
~kenny -
How to find common columns from two tables
regards
812809 wrote:
regardsHi,
Use User_tab_cols view to extract the result.
Try
SQL> create table test3(id number(10),name varchar2(10));
Table created.
SQL> create table test4(id number(20),addr varchar2(200));
Table created.Now query user_tab_cols
SQL> select column_name from user_tab_cols where table_name='TEST3'
2 intersect
3 select column_name from user_tab_cols where table_name='TEST4'
4 /
COLUMN_NAME
IDHope this helps
Regards,
Achyut
Ps-> Mark as Complete/Answered if it meets your requirement -
Find if there is any common record in two internal tables
hi,
I have two internal tables of same structure... say A and B.
I need to know if there are any common lines in them.
one way is to loop in any one of them and keep executing a read on the other.
can anyone suggest a better way.
thanks,
Arindam.Hi Arindam,
To find common records in two internal tables, they can be compared
If INT_DATA1 EQ INT_DATA2.
endif.
The first criterion for comparing internal tables is the number of lines they contain. If two internal tables contain the same number of lines, they are compared line by line, component by component.
If the internal tables contain the same number of records and are sorted on the same key, the comparison stops at the line where the records are not common. For example, if the number of common records is 4, the comparison stops at the 5th line and sy-tabix becomes 5.
Hope it helps.
Regards,
Nupur -
Use SAPFPAYM_MERGE for comp codes in different countries?
Hi,
Is it possible to use trans FBPM1, program SAPFPAYM_MERGE, to merge payment runs from different company codes in different countries?
In my case, all foreign payments will be done centrally for all company codes and I would like to merge all runs into one payment file (media).
Thanks and regards,
Helene NorellHi,
Thanks for you fast reply.
I have made the neccessary settings for this transaction, but trying to merge payment runs for two different company codes (one Swedish, one German), I get the following message:
*Company codes exist in different countries, for example DE and SE
Message no. F0002*
One of the prerequisites when reading the program code is also 'Company Codes are compatible (currency, country)'.
Does that mean I can't merge payment runs from company codes in different countries?
BR
Helene -
AP vendors with same vendor number in two different companies
I am having trouble running the payment run f110 for two vendors in two different company codes. The vendor is the same so the vendor number was set up the same in two different company codes.
I continue to get the error fcz003. I deleted all of the payment runs and still have the error. Are separate payment runs possible ? Or do I need to have vendor 1234 send it's open balance to vendor 1234 in the first company code. If so, what is the best way to move the balance.
Thank you,it is to be seggregated through company codes,if vendor is present in different copany codes
Maybe you are looking for
-
'iCloud says storage is full' - But it shouldn't be?
My iPhone will not back up because it say my iCloud is full. I have looked at the breakdown of what is due to be backed up and it says I have 4.9GB on the Camera Roll. But I have transferred all the pictures and videos off my phone so it is comple
-
How to make a storage on windows server 2012?
Hello, I've got a domain running with some users joined to it. every user got it's own storage already of 250gb. The only thing left to do is making a global storage, just 1 storage of 250 gb that every user can access and i need it to be shown in "T
-
Hello! My mom wants to give me her old Power mac G4 (Quicksilver) desktop if I buy a monitor for it. I'm hoping to buy the matching monitor that pairs up with the system. The reason I want to buy the original monitor is to be safe and sure it wo
-
Hello, Wonder if anyone can help me. I used to have my iMac hooked up to my TV and could watch movies loading my dvd into a slot on my iMac. Because I moved I had to disassemble the whole sistem.Now I'm putting together but I cant get the movie onto
-
Can any one tell me how to get the Cell ID from the nokia�s mobile stations
Hi All: Im trying to get the gsm cell information from nokia�s cell phones, but the properties "phone.cid", "phone.lai", "phone.mcc" and the "phone.mnc" not works, every time the results are null. Could any one help me? Please contact me at [email pr