Find control which has been "grouped" and dropped in a Tab control fails...

This one sounds like one I have already read about, but I doubt this qualifies as a "feature". I think it is an outright bug.
Anyway here it goes:
- drop two controls on the FP.
- group them.
- drop a Tab control, drag the grouped controls in it.
- switch to the BD.
- right-click one of the controls (not the Tab control, the other two) and try to "Find Control".
- for a brief second, the control will be highlighted, but eventually, the Tab will be selected.
That's OK when the Tab is not cluttered with controls and when you are careful watching where the highlighted object is located, but I do not think that this is an intended behavior.
Tested in LV 2011.

Zing
I'm with you on this suggestion! At the time, I was pretty sure we'd found a bug so I grabbed a LabVIEW Expert to get his opinion. He was able to tell me that the code is not necessarily working incorrectly, but your situation might not have been taken into consideration during design. I'd say create a new thread on Idea Exchange to differentiate it from the other issue and get some Kudos on your post.
KyleP
Applications Engineer
National Instruments

Similar Messages

  • I have bought an Iphone 4 for my daughter from the apple store, I am trying to use a giff gaff sim which has been activated and has credit on it but the phone does not recognise the sim card

    I bought an Iphone 4 for my daughters birthday from the Apple shop, I am trying to use a Giff Gaff sim card which has been activated and has credit on it but the phone keeps giving me the message  "please use a compatable sim"

    Read here:
    http://support.apple.com/kb/HT5014

  • HT1689 How do we find out what has been purchased and for how much on an IPhone 4

    How do we find out what has been purschased and for how much on an IPhone 4?

    View Purchase History
    http://support.apple.com/kb/HT2727

  • HT1657 Cant find movie that has been purchased and billed

    Downloaded some movie rentals and although one is there and has watch attached in purchased window the others are not there or so it would seem. I can see them in history and has the tag  " view " two of these were on the same bill one is the one viewed in purchases but another is not , any help appreciated

    Cheers helped greatly although still somewhat confused? I rented three movies two of which I couldnt find but based on your response found them in video app, however the other one is sitting in purchased items not in the video app why is that? Thanks

  • Got my images online which has been taken and deleted offline

    I was performing some online-offline experiment.
    While experimenting I put my mobile on Airplane mode and took a new picture with default camera application[BB- Z10]. Then I deleted the picture. Then I switched off the Airplane mode.
    Then I checked my Box account, this deleted image was there online, where as I couldn't find the same deleted image anywhere on my mobile device. This is a serious privacy violation and I was not expecting this from blackberry. 
    Downloaded Box from BlackBerry World

    I expect the answer is that you have a setting enabled to sync pictures to Box, and that you deleted the local picture file but not the duplicate in the sync folder. When you turned the radio on the files in the sync folder were uploaded to Box. If that is what happened, I can make a case that it is a useful feature and user error for not understanding how it works...or rather your experiment revealed how it works and now you know.
    So, am I right?
    - Ira

  • Is there anyway to uninstall p/shop frrom my old laptop which has been damaged and I cannot retrieve any info and re-install it on my new laptop? thank you

    I previously purchased p/shop and had it installed on my old laptop.
    It was badly damaged and I cant retrieve anything from it without paying out a fortune to have a company try to access it.
    Is there anyway I can get p/shop uninstalled and re-install t on my new laptop?
    The old laptop is completely kaput-- doesn't even switch on?
    Thank you

    I am sorry its taken me a day or so to respond. ( My niece went into labour on the other side of the country and I have only just gotten back home)
    I would just like to say thank you so much to the kind forum members who responded with very helpful solutions.
    As a complete idiot when it comes to computers I am so grateful.
    I will speak to some friends who are much more computer savvy and will probably be able to put the suggestions into action.
    I really appreciate all the assistance as I would really like to retrieve some of the stuff from the old laptop and transfer it to my new one as I have no way to replace
    the "lost" stuff,
    Again Thank you
    Elaine

  • How do I see a book which has been downloaded, but does not show in Adobe Reader XI?

    How do a find a ePub book in Adobe Reader XI, which has been downloaded and does not show up? janf76607913

    Visit:
    Adobe Digital Editions
    Be well...

  • I have a voice memo that is 8 minutes long which has been synked to iTunes and I want to email it to a friend. I cannot find a 'share' button or any way to email it. Cansomeone help me?

    I have a voice memo that is 8 minutes long which has been synked to iTunes and I want to email it to a friend. I cannot find a 'share' button or any way to email it. Can someone help me?

    I still have the email and the order number but they are no use to me because it is more than 180 days since I ordered this from them.
    The registration cade is contained in the email Apple sent you on purchasing.

  • Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

    Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

    Hi erastyle,
    Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
    Windows:
    C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
    Once downloaded please follow this KB article to use the Tool.
    http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
    Please let us know if it helps.
    Regards,
    Abhijit

  • How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is "unable to find the original file?" I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

    How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

    Backup drive?
    Subscribe to iTunes Match?
    If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck.  A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work.  You can buy a lot of CDs for $200.

  • Old computer died and I am trying to install Illustrator CS5 on new computer. Last version I had before CS5 was/is Illustrator 10, which has been installed in new computer. CS5 install says I need CS2,3, or 4 before installing 5, but old computer went dir

    Old computer died and I am trying to install Illustrator CS5 on new computer.
    Last version I had before CS5 was/is Illustrator 10,which has been installed on new computer.
    CS5 install says I need CS2,3 or 4 before installing 5, but old computer went directly from 10 to CS5.
    How can I repeat this 10 to CS5 install?

    It does not seem likely that CS6 was upgraded from version 10.  You might want to check your purchase history in your Adobe account to see if there is some missing link in the chain of purchases you made.
    You can always try contacting Adobe support thru chat to see if they can find information or otherwise assist you in this matter.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I have a huge iphoto library and an HP simple save hard drive which has been mac formated.

    the discssion board states to close iphoto, go to folders, locate, click and drag library to new location (ie-my HP simple save which has been formated to mac)  When I look in my libraries, I have several for libraries, including some that say 6. 
    When I open one, not all my photos are contained, only a part of my entire iphoto library
    which one do I use--and how can to confirm that ALL my photos are on my external hard drive?
    thank you for your help---
    [email protected]

    Open a Finder Window and go to your Username then to the Pictures folder. In there you will find a file, actually a folder but I won't get into that, called "iPhoto Library.photolibrary". It is that files (Folder listed as a Package) you need to Copy to your external drive.

  • I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

    I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • HT201342 Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

    Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

    Thx Winston,
    I can count the send item. But let me try to explain why did I ask this question.
    I had a trouble in sending e-mails from icloud on 22/2 and when I saw in my send item there were no emails.
    But the mesgs to whom I emailed received and out of which only few of them didn't got the email. So I wanted to know the log abt the outflow of the mesg with subject and the receipants email id and the list with attachment or not.
    How and where will I get the information apart from send item and draft mesg and the outflow undelivered?
    Regards
    Sarfaraz

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

Maybe you are looking for

  • Songs won't show up black (they're gray) when ipod connected to iTunes

    When I used to connect my iPod to the computer, the songs would show up as black in the "My Device" section. Now, however, they're showing up as gray. So, where I used to be able to click on one of the songs within "My Device" to play that song, now

  • Problem in Delete PSA Request

    Hello Guys, I have come across a strange behavior of Delete PSA Request variant in Process Chains. When I am trying to delete PSA through Process Chain, I could delete PSA of all datasources except 0CO_OM_WBS_1. I tried it through different combinati

  • How to get ISO week number?

    hi, I need to interact with a server that expects to be passed the ISO week number. The Calendar class doesn't seem to support this though (although the documentation claims that it is ISO 8601 compliant). For instance the web page here gives today (

  • IPod Software - needed after update?

    Quick question about the iPod software updater. Does anyone know if I really need it on my computer to run my iPod on the computer? It takes up 171 MB on my work computer and I think that's what is slowing the computer down. It's by far the largest f

  • Change in  material in T-Code VD52

    Dear Gurus, If we were to make any amendments to a material in VD52 ie the description would it automatically update in any backorders? Wishes, Abhishek