Find Datas from Select Satement - Oracle 11g After changing the Connection?

Iam very very new to Oracle. Yesterday only I have Installed Oracle 11G & created DataBase - JafferDB
And from Oracle SQL Developer, I have created a connection called - JafferCon and SID also given..and the role is - SYSDBA
And I excute the below statement
insert into MyTable1 Values ('AAA1', 'BBB1', 'CCC1')
insert into MyTable1 Values ('AAA2', 'BBB2', 'CCC2')
Then I checked by Select statement, it has shown the values....No Problem....
But, as a test, I deleted the connection and created a new connection tio the same DataBase with different name
and when I checked by Select Statement....., it has not shown the values....????
Does any mistakes....?
Thanks for the directions...

after you insert, update or delete any data in the database you must use "commit" or "rollback" statement. Commit if you want "save" the changes or rollback if you don't.
Other users can't see this new changes until you do the "commit".

Similar Messages

Create Table Trigger to replicate data from MSSQL2K5 to Oracle 11G on Linux

I am trying to create a trigger on my MSSQL 2k5 server so that when a record is inserted, a replicated record is created in a table on an Oracle 11g database on a Linux server (Oracle Linux 6).
Creating the trigger is easy, but when I test it I am getting an error stating the following:
.NetSqlClient Data Provider The operation could not be performed because OLE DB Provider 'OraOLEDB.Oracle' for linked server "<myserver>" was unable to begin the distributed transaction.
OLEDB Provider "OraOLEDB.Oracle" for linked server "<myserver>" returned: "New transaction cannot enlist in the specified transaction coordinator"
Here is the trigger (MSSQL):
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE insert_aban8_state
    @an8 int,
    @st nvarchar(3)
AS
BEGIN
    SET NOCOUNT ON;
    declare @c numeric
    select @c = count(*) from [e9db]..[CRPDTA].[ABAN8_STATE$] where alan8=@an8 and aladds=@st
    if(@c =0)
     begin
        insert into [e9db]..[CRPDTA].[ABAN8_STATE$]
        values(@an8, @st)
     end
    END
GO
After reviewing the MS Transaction Coordinator, I am now totally confused. I checked the services and have the MS DTC enabled and running, but am not sure what to do on the Linux side.
Does the Oracle Services for Microsoft Transaction Server (OraMTS) work on Linux? I could only find references for this for Oracle 11g on Windows.
What do I need to do to enable this replication via mssql table trigger to Oracle11g on Linux?

nsidev wrote:
While I would agree in part, it appears from the message that the trigger is requiring the Transaction Service to be enabled on both the host and target. The point of this post is to determine what, if anything, I need to do on my Oracle DB to allow the trigger to complete successfully.
There are many posts found with Google concerning the OraMTS service on the Oracle system, but they all appear to be for Windows based systems. My question is, is this service part of the Linux based Oracle DB and if so, how do I initialize it?
If I am mistaken and this is truly an issue with the MSSQL server, I will replicate the post in those forums. I am just looking for direction and help.
1) I have NEVER heard that Oracle has, knows about, or supports any "Transaction Service".
2) Consider what I previously posted regarding the flavor of client source.
If your assertion about this mythical service were correct, then the Oracle DB would have to be able to "know" that this client connection was originated by SQL Server.
I don't understand how or why Oracle should behave differently depending upon whether INSERT is done inside or outside a MS SQL Server trigger.
Please explain & elaborate why Oracle should behave different depending upon the source of any INSERT statement.
3) From Oracle DB standpoint an INSERT is an INSERT; regardless of the client.

Failed to open the connection after changing the connection in CMC

Hi
Below are our environment details:
BOXI 3.1 SP3
Solaris Sparc 10
Crystal Reports 2008 Sp3
Weblogic 11g
Our team is facing the problem as described below:
We have created Crystal Reports using JDBC connection and it works fine
in an environment(SIT).
When we migrate these reports to the another environment(UAT) we get
the error "Failed to open the connection"
After migrating we indeed change the connection to Custom Database
Login Information in CMC.
So to troubleshoot we installed Crystal Reports in UAT environment and
had to perform Set DataLocation after which
the reports starting working fine.
Now when we are migrating reports to Production we have the same issue.
We cannot install Crystal Reports on Production this time and hence we
are stuck.
Please let us know if any known workaround or solution for the same.
Thanks
Kamal
Edited by: Kamalaksha Shetty on Nov 15, 2011 4:18 AM

Hi Meenal,
I am not 100% sure I understood the workaround of having Crystal Designer on the server. Can you connect from UAT designer to production and perform the same operation?
Check this KBA that describes this problem and a solution:
https://service.sap.com/sap/support/notes/1445067
Regards,
Julian

How to get data from PostgresSQL to Oracle 11g

I have a general idea on the topic but need more information on the procedure to get data from Postgres (version 8.2 on Linux) database to Oracle 11g (on AIX Unix). Thanks very much in advance!

You need to configure DG4ODBC (=Database Gateway for ODBC). When you install it on a 64bit OS (for example on the same machine as your Oracle database), then it requires a 64bit Postgres ODBC driver. If you install it on a 32bit machine (for example on a 32bit Linux), then you need a 32bit Postgres ODBC driver. Commonly on Unix you also need to install a matching ODBC Dreiver Manager (for example you can get it from www.unixodbc.org) when Postgres doesn't ship one with their driver.
A note describing the DG4ODBC configuration can be found on My Oracle Support:
How to Setup DG4ODBC on Linux x86 32bit (Doc ID 466228.1)
and
How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) (Doc ID 561033.1)

I had migrated Oracle 10g database from Windows to Oracle 11g Linux

I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Please guide me where I have to begin (starting point) looking into it.
Some document stated gather system statistics. How to check system statistics is up to date
What are the crucial initialization parameter ?

Hi,
Let me just point you out to the documentation, which may concern you:
I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Managing Optimizer Statistics
How to check system statistics is up to date
Managing Optimizer Statistics
What are the crucial initialization parameter ?
Configuring a Database for Performance
Thanks &
Best Regards,

Move database from server running Oracle 11G to server running Oracle 12c

I'm trying to find out the easiest way to migrate a database from a server running Oracle 11G to a server running Oracle 12c. I have tried using RMAN's duplicate database command but have run into far too many issues when trying to setup both servers before running the duplicate command. If someone could provide some clear guidance on configuring both servers for the RMAN Duplicate command then that would be great. The other thing I have tried is performing a cold backup of all the files for the database (control files, data files, etc.). Copying them to the new server and then recreating the control file to include the correct location and names for the datafiles and redologs. After recreating the control file the database will not start up. I'm suspecting this is due to the version differences. If you can provide me clear (ie. migration for dummies) instruction for getting either of these methods to work it would be greatly appreciated. I'm also open to any other method you can think of to achieve what I'm trying to accomplish. Thanks, Paul Noyes

Pl do not post duplicates - Move database from server running Oracle 11G to server running Oracle 12c

Data from Excel to Oracle DB

Hi,
I can upload data from excel to access having created stored procedure on access.
I do the upload using my vb code.
How can I upload data from excel to oracle db? could i use the same technique as above? only problem is im not sure if that vb code will work with oracle?
has anyone done this before? anyone have example code?
kindly assist me here
thanks

The easiest way to do this is to use a Oracle ODBC connection which can be found on OTN. You do not need a stored proc.
After installing Oracle ODBC on the machine where Excel and Access live, do the following.
Note, you already have steps 1, 2 and 3. I list all the steps for others.
1. Create your MS/Excel workbook
2. Add data to it.
3. Save it as "book1.xls".
4. Open MS/Access
5. Create new blank database, call it db1.
6. Then from the file menu, get external data, import, make sure the file type is xls, select book1.xls.
7. The wizard will walk you through the process of importing you Excel workbook into a new table.
8. Save
9. From the file menu select export table.
10. Select ODBC at the bottom of the "Save as type list".
11. Then (depending how you set up ODBC) select Machine Data Source.
12 . Select your Oracle ODBC connection and press OK.
You now have taken data from Excel to Access and placed it in the Oracle schema that was named when you setup your Oracle ODBC connection.
BG...

Generate Insert Statement Script to Extract Data from Table in Oracle 7i

Hi all, I have an old Oracle legacy system that is running for over 15 years.Every now and then we need to extract data from this table@ ORacle 7i to be imported back to Oracle 10G.
My thoughts are to create a script of Insert statements in oracle 7 and that to be deployed back to Oracle 10G.
I found this scripts in Google and not sure how exactly this works.Any explanation on thsi scripts , would be greatly appreciated.I find this scripst may help to generate a set of insert statements from that table to the latest table at 10G.
<pre>
-- Step 1: Create this procedure:
create or replace Function ExtractData(v_table_name varchar2) return varchar2 As
b_found boolean:=false;
v_tempa varchar2(8000);
v_tempb varchar2(8000);
v_tempc varchar2(255);
begin
for tab_rec in (select table_name from user_tables where table_name=upper(v_table_name))
loop
b_found:=true;
v_tempa:='select ''insert into '||tab_rec.table_name||' (';
for col_rec in (select * from user_tab_columns
where
table_name=tab_rec.table_name
order by
column_id)
loop
if col_rec.column_id=1 then
v_tempa:=v_tempa||'''||chr(10)||''';
else
v_tempa:=v_tempa||',''||chr(10)||''';
v_tempb:=v_tempb||',''||chr(10)||''';
end if;
v_tempa:=v_tempa||col_rec.column_name;
if instr(col_rec.data_type,'CHAR') > 0 then
v_tempc:='''''''''||'||col_rec.column_name||'||''''''''';
elsif instr(col_rec.data_type,'DATE') > 0 then
v_tempc:='''to_date(''''''||to_char('||col_rec.column_name||',''mm/dd/yyyy hh24:mi'')||'''''',''''mm/dd/yyyy hh24:mi'''')''';
else
v_tempc:=col_rec.column_name;
end if;
v_tempb:=v_tempb||'''||decode('||col_rec.column_name||',Null,''Null'','||v_tempc||')||''';
end loop;
v_tempa:=v_tempa||') values ('||v_tempb||');'' from '||tab_rec.table_name||';';
end loop;
if Not b_found then
v_tempa:='-- Table '||v_table_name||' not found';
else
v_tempa:=v_tempa||chr(10)||'select ''-- commit;'' from dual;';
end if;
return v_tempa;
end;
show errors
-- STEP 2: Run the following code to extract the data.
set head off
set pages 0
set trims on
set lines 2000
set feed off
set echo off
var retline varchar2(4000)
spool c:\t1.sql
select 'set echo off' from dual;
select 'spool c:\recreatedata.sql' from dual;
select 'select ''-- This data was extracted on ''||to_char(sysdate,''mm/dd/yyyy hh24:mi'') from dual;' from dual;
-- Repeat the following two lines as many times as tables you want to extract
exec :retline:=ExtractData('dept');
print :retline;
exec :retline:=ExtractData('emp');
print :retline;
select 'spool off' from dual;
spool off
@c:\t1
-- STEP3: Run the spooled output c:\recreatedata.sql to recreate data.
Source:http://www.idevelopment.info/data/Oracle/DBA_tips/PL_SQL/PLSQL_5.shtml
</pre>

Thanks Justin.
I get what you are saying,i really wanted to see the output of the codes, because the furtherst i could get from that code is
SELECT EXTRACTDATA('MYTABLE') FROM MYTABLE;
and it generated this:
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
"select 'insert into MYTABLE ('||chr(10)||'DATE1,'||chr(10)||'TIME1,'||chr(10)||'COUNTS) values ('||decode(DATE1,Null,'Null','to_date('''||to_char(DATE1,'mm/dd/yyyy hh24:mi')||''',''mm/dd/yyyy hh24:mi'')')||','||chr(10)||''||decode(TIME1,Null,'Null',TIME1)||','||chr(10)||''||decode(COUNTS,Null,'Null',COUNTS)||');' from MYTABLE;
select '-- commit;' from dual;"
I was expecting a string of
insert into mytable values (19/1/2009,1,1);
insert into mytable values (19/10/2008,5,10);
Thanks for the explanation .

Data from BW to Oracle.

Hi All,
I am new into BW and i know how to get the data from my applications backend i.e ORACLE to BW system for reporting purpose. I have a scenario where user can edit this information through IP. I want this modified data to go back to ORACLE DB so that i can use this in my webdynpro application for further processing.
So how can i achieve the transfer of data from BW to ORACLE DB in real time.
Hope i am clear and will get some solution for this.
thanks & regards,
Manoj

@Jai
no, it's not DBCONNECT.
Database links are an ORACLE feature that comes for free if you have Oracle on both sides.
Main steps for the implementation part:
BW side:
1. you have to invite the Oracle database in the protocol.ora file of the MY_BW database.
The host is the server where the local Oracle database instance is running.
protocol.ora:
TCP.INVITED_NODES= (myORACLEserver,...other hosts...)
2. Define a database user in the BW database MY_BW_USER
3. Grant SELECT privileges for the user MY_BW_USER that is used in the link:
grant select on my_bw_table to my_bw_user;
Oracle side:
1. database link
CREATE DATABASE LINK "MY_BW.WORLD" CONNECT TO "MY_BW_USER"
    IDENTIFIED BY "my_bw_user_password"
    USING '(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = mySAPBWServer.com)(PORT = 1521))
    (CONNECT_DATA = (SID = MY_BW)(GLOBAL_NAME = MY_BW.WORLD))
2. Create a view with the SELECT to extract from BW via the link (listed after the @):
Create view view_extract_from_bw as
select * from my_bw_table@MY_BW.WORLD
You can do any transformations in the SELECT part to fit the data into the local Oracle table later in the insert.
3. You will pull the data on the Oracle DB side from the BW database via the view that inturn uses the link
to the BW Oracle system:
insert into local_Oracle_table select * from view_extract_from_bw
You see some support is needed from Basis guys to establish the link. But once implemented
you have a interface from your local Oracle to the BW database.
bye
yk
Edited by: Bernd Boecker on Jul 2, 2008 1:52 PM

Read data from an external Oracle-DB: Codepage problems

Hi,
I try to get data from an external Oracle-DB which runs under NLS_CHARACTER
WE8ISO8859P1. In this DB are russian texte stored. If I read these texts via native-SQL I obviously get wrong characters. (e.g. Èíñòðóìåíòû äëÿ óãëîâîé øëèôîâàëüíîé ìàøèíû instead of Инструменты для угловой шлифовальной машины). If I save the text as a html file and then open it with IE. I can change the encoding and get the right view.
Has anybody got an idea ? (Mabye I can read the data in a different codepage or maybe there is a possibility to convert the codepage in SAP after reading it from oracle)
Thanks a lot !!!!

The problem is solved.
Many thanks !

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?

Is it possible to perform network data encryption between Oracle 11g databases without the advance security option?
We are not licensed for the Oracle Advanced Security Option and I have been tasked to use Oracle Network Data Encryption in order to encryption network traffic between Oracle instances that reside on remote servers. From what I have read and my prior understanding this is not possible without ASO. Can someone confirm or disprove my research, thanks.

Hi, Srini Chavali-Oracle
As for http://www.oracle.com/technetwork/database/options/advanced-security/advanced-security-ds-12c-1898873.pdf?ssSourceSiteId… ASO is mentioned as TDE and Redacting Sensitive Data to Display. Network encryption is excluded.
As for Network Encryption - Oracle FAQ (of course this is not Oracle official) "Since June 2013, Net Encryption is now licensed with Oracle Enterprise Edition and doesn't require Oracle Advanced Security Option." Could you clarify this? Thanks.

Sql loader loading data from legacy to Oracle

Hi
we have a requirement that we need to import data from legacy to oracle AR.We know that we need to put the data file in BIN folder,but I want to know about the data file source if we place in windows folder instead of BIN directory will SQL loader picks the file and loads the data.
Thanks
Y

Yes,
Refer this
http://www.oracle.com/technology/products/database/utilities/htdocs/sql_loader_overview.html
* Load data across a network. This means that a SQL*Loader client can be run on a different system from the one that is running the SQL*Loader server.
* Load data from multiple datafiles during the same load session
* Load data into multiple tables during the same load session
* Specify the character set of the data
* Selectively load data
* Load data from disk, tape, or named pipe
* Specify the character set of the data
* Generate sophisticated error reports, which greatly aid troubleshooting
* Load arbitrarily complex object-relational data
* Use either conventional or direct path loading.
-Arun

How can i convert data from DBF to oracle database 10g?

Sir,
How can i convert data from DBF to oracle database 10g?

I assume you at least know how to dump the contents of foxpro dbf file into CSV format.
Regarding SQL*Loader, hope this demo makes it a bit clear to you...
http://www.princeton.edu/~storacle/sqlloader_demo.shtml
I agree that it is an old web page (references Oracle 8.0.5) but basics remain the same.
If it is still unclear to you after referring above link, then get an Oracle consultant.

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Find Datas from Select Satement - Oracle 11g After changing the Connection?

Similar Messages

Maybe you are looking for