Find Distribution percentage from Sender Cost to Receiving Cost

Hi All,
How can I find the percentage of distribution from sender cost center to receiving cost center in SAP.
Kindly suggest.

Hi,
Check your distribution cycle: KSV3
Under Segment header screen:
Receiver tracing factor.
Receiver Rule: Variable Proportions/ Fixed Proportions...etc.
Other wise:
Perform the distribution cycle with test run, KSV5
Double Click on senders/ Receivers...you will come to know the base for distribution.
Regards,
Pavan Kumar Arvapally

Similar Messages

Passing Multiple Single Values from Sender Query to Receiver Query in RRI

Dear All.
We have 2 - Bex Reports ZBEX_1 & ZBEX_2
1. In ZBEX_1 having the fileds data like the below.
Account Doc. Number - Clearing Document --- Amount
12345                  - 65432                --- 100
12346                  - 54321               --- 50
2. In ZBEX_2 having the following data.
Account Doc.Number -- Amount
45342                     - 10
66666                        - 100
65432                       -   10
54321                      - 5
3. I am Traying to create RRI Between ZBEX_1 & ZBEX_2 , with Sender query as ZBEX_1 and Receiver query as ZBEX_2
If I drilldown from ZBEX_1 need to show the following output in the ZBEX_2
Account Doc. Number - Amount
65432                       -     10
54321                      -     5
i.e If Clearing Documnet in the ZBEX_1 is same as Account Doc. Number in ZBEX_2 those Account Doc. Numbers I have to show in the output of ZBEX_2 RRI Report.
Both the records I have to show at a time.
So please suggest me
1. How to pass Multiple Single Values to Next Query using RRI
2. How to Map Clearing Document to Account Doc. Number in RRI.
NOTE: Account Doc. Num length is same as Clearing Document
Please suggest me.
Thanks & Regards,
Kiran Manyam

Your scenario of passing values from multiple records in Source does not suit well for RRI Jumps.
In ZBEX_2 query, create a Replacement path variable on Clearing Document. In that Replacement path variable, use the Replacement with query option and choose the ZBEX_1 as the underlying query source.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/589b3c494d8e15e10000000a114084/frameset.htm
When you execute ZBEX_2, what ever clearing document values that ZBEX_1 has will be passed through the replacement path variable as a filter to the ZBEX_2
Hope it helps!
Uday Pothireddy

Fault Message from Sender System to Receiver System

Hi
I have a synchronous scenario
SAP R/3 --> RFC Adapter -> XI -> SOAP Adapter --> Web Service.
When web service returns successful response, it gets mapped properly to an internal table of RFC. But, when web service returns fault message (as parameters passed to the web service are incorrect), RFC gives dump. Below message is shown in sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: java.io.IOException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
{ Sometime AdditionalText has different message, depends upon what parameters Sender system is providing }
Now I would like to provide this message back to SAP RFC. Even if I will create the Fault message type, how exactly I can map this " Exception message " with my fault message type.
I have checked weblog <a href="/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1 Message Types - A Demo</a> but this one talks more about proxy & Asynch scenario.
Can you pls. provide steps with which I can map exceptions message of WS to RFC.
Best Regards
- Lalit Chaudhary -

I got the <RFC>.exception structure from SAP Team.
And from my side I build the "xsd" file for following generic Error structure -->
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PARSING">SOAP_EXCEPTION</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>An error message</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I import this xsd file ( as External Definitions ) and keep this in the Inbound Interface as Fault Message Type & mapped the contents of it with <RFC>.exception structure.
Now when their is some Application error like Web-Service is down, we are not getting DUMP in SAP R/3 system but I mapped the "AdditionalText" field of xsd file with " Attributes --> V1 " of <RFC>.exception structure and on SAP R/3 system the field message-V1 is empty which suggest nothing is coming in this field.
Then I even tried to map constant values <RFC>.exception structure but in SAP R/3 nothing is coming. Can you suggest how actually SAP developers can capture these values or is their anything I am missing on XI side.
Best Regards
- Lalit Chaudhary -

How do I stop the Macbook Pro Messages application from sending things I receive to my iPhone 5c through Imessage?

My iPhone 5c is receiving the same messages that I've already read on my Macbook Pro and I would like to stop connecting my phone number to the computer. Is there a way to fix this? I am using IOS 1.7.2 if this problem has anything to do with my phone and that has any relevance.
Edit: I would not like to turn iMessage off on my phone, as I use it because a lot of the area I live in does not have service while we have wifi.

Try this:
1) On the Mac, open Messages and then open Messages Preferences
2) In the left-hand pane, select your e-mail account that is receiving message.
3) Uncheck "Enable this Account"
Let us know whether this worked or not.

Sender Cost Center may not be the same as Receiver Cost Center

Hello every body
I am trying to create a report that shows the hours that an employee has spend on an activity in a project.
Key Figure:
Hours
Characteristics:
Sender Cost Center (Employees Cost Center)
Receiver Cost Center
Activity code
What happens is that in some cases the Sender- and Receiver Cost Center do have the same value (are the same) in a row. The task in front of me is to exclude these rows from the query result.
One way to resolve the problem is to make a variable for each object; use replacement path and bring the values of their key into query as keyFigures; subtract one from the other, and use a condition that only allows values different from 0.
The problem is that the key value of the Cost Centers are not always numeric values (e.g. M10110). These values can not be a part of a subtraction.
I can resolve this issue by deleting the data in the cube and make a key Figure in update rules with values 0 (sdr. and rec. have different keys) and 1 (sdr. and rec. have same keys).
Does any one knows of a way to accomplish the result I need in BEx, so I can avoid deleting every thing in the cube?
Best regards
/FZA
Message was edited by: Fariborz Zangoui

Hello Roberto
Thank you very much for your help.
Some times it is difficult to search the forum if you do not know what you are looking for (in this case 'virtual key figure').
Best regards
/FZA

Is there an easy way of creating a distribution list from an email with multiple addresses? Those addresses are not in your contacts already, and don't need to be.

I want to be able to take all the email addresses someone else has used to distribute an email and create the same distribution list for myself for future use. I don't want to add all those people to anywhere in my contacts list. I just want them to be in my "new distribution list", like "soccer families", etc. I tried to copy and paste, but didn't get anywhere. Maybe I was close, or maybe it isn't possible. Thoughts?

Ed on iPad wrote:
I don't want them in contacts because they are simply a related group (like my sons current soccer team). People I may never need to email again after a sports season. I don't want to have to have these people in my contacts permanently.
You don't. When the season is over, delete them.
But, the text clipping should work.
The next IOS should have a feature "create mailing list from distribution list". A fast and simple way to retain a distribution list from an email you received. People get copied all the time using distribution lists they may want to reuse easily, like school, sports or work groups. Oh well.
How is that any different from adding them to Contacts? Here's the feedback page: http://www.apple.com/feedback/
There is a set of Mail Scripts that has a function to Add Addresses from an email to any group. But, it doesn't work with Mountain Lion.

How to send email to external users using the distribution list from workflow

I have created distribution list in SO23 with external email addresses.
How I can use distribution list in "Send Mail component" or I should use another component?
It works fine for a single email address. And distribution list works fine when I use it via SBWP.

Hi,
Take activity step instead of Mail step. User fm SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
And use fm SO_DLI_READ_API1 to find list of user from distribution list. You can find how to use this fm in rule 30000012

Sender and Receiver Cost Center

Hi Experts
I have to assign CC as sender and receiver for all Employees.
I assigned the Sender CC in IT315; Need to know where to enter the receiver CC. Will it be the one in IT0001?
Please Confirm
Thanks

Hi,
Yes, you are right. Costs from sending cost center are consolidated at receiving cost center that can be stored in IT 0001.
Please have a look at SAP's brief explanation of cost accounting (last page) http://help.sap.com/bp_bblibrary/500/Documentation/N71_Scen_Overview_EN_DE.ppt
Cheers!

How to find Receiver Cost Center details

Hi All,
How to find the Receiver Cost Center, Receiver Order and Receiver Text which is used in entering CATS?
Please let me know from which infotype we can pick?
thank you!
Prasad

Hi,
Please check IT0001 and IT0315.
Regards,
Dilek

Using sender cost as receiver in assessment

Dear SAP experts,
I have a case in assessment cost center.
When create segment in assessment cost center, one of the receiver cost in receiver group is the sender of the cost.
For example :
sender : cost center A
receiver : cost center A,B,C,D. (one of the receiver is also the sender).
Is it possible to do that?
Regards

hi,
Yes, it is possible, but it should be verified that makes sense.
Please check the oss notes wich provides some recomendations about how to
maintain your cycle allocations:
416507    ALLOCATION: Troubleshooting guide
206690    Overview Note: CO Assessments - Performance Related
64805    ALLOCATION: Find error in cycles
I hope helps,
Best regards,
MLM

ALE, use bd79 (converting data from sender to receiver to blank out fields)

Hi, I am trying to blank four fields out in our FI IDOC for a certain business reason. These fields must be blank (it is the FIDCC1 message type). I am trying to use transaction bd79 (converting data from sender to receiver) maintain rules. Is there a way to blank out these fields using a conversion rule? I can change data fine but I cannot find a way to blank or null a field out. Thanks in advance.

You should have a look at the inbound function module (linked to your inbound process code). sometimes there are checks that if fields are initial that nothing will be changed.

Sending to Distribution Groups from External Addresses

Hi,
I am trying to send to a EX2013 Distribution list from the outside world. The list contains both internal users and external contacts. If I send it from internally the list gets send out correctly, if i try and send it out from the outside world only internal
users receive the emails but there is no errors or NDRs to tell me why.
I have allowed '<label for="ResultPanePlaceHolder_EditMailGroup_deliveryManagementSection_contentContainer_rblRequireSenderAuthentication_1" id="ResultPanePlaceHolder_EditMailGroup_deliveryManagementSection_contentContainer_rblRequireSenderAuthentication_1_label">Senders
inside and outside of my organization' in the Delivery Management tab.</label>
I do use GFI which shows the emails but just says OK so it doesn't seem like its that which is the issue.
Can anyone help please. I did do a Powershell but cannot remember what it was.

Hi ,
On my side i will not prefer ecp for message tracking. Instead i will prefer EMS.
Below command will be used on the exchange management shell to have a grid-view on the output.
Get-TransportService | Get-MessageTrackingLog -Sender "external user" -ResultSize unlimited -MessageSubject "test" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
| Out-GridView
(or)
Below command will be used on the exchange management shell to have the output on the csv file.
Get-TransportService | Get-MessageTrackingLog -Sender "External user" -ResultSize unlimited -MessageSubject "test" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
| Export-csv c:\nithya.csv
Reference
Link for message tracking : http://exchangeserverpro.com/exchange-2010-message-tracking-log-search-powershell/
Thanks & Regards S.Nithyanandham

HT201342 Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Thx Winston,
I can count the send item. But let me try to explain why did I ask this question.
I had a trouble in sending e-mails from icloud on 22/2 and when I saw in my send item there were no emails.
But the mesgs to whom I emailed received and out of which only few of them didn't got the email. So I wanted to know the log abt the outflow of the mesg with subject and the receipants email id and the list with attachment or not.
How and where will I get the information apart from send item and draft mesg and the outflow undelivered?
Regards
Sarfaraz

The same filename from a sender to a receiver file adapter

Michal has provided us with a brilliant <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14. I guess a lot of people have been waiting to do this. However, I have a slightly different scenario. In this case, XI is used as a medium to transfer a PDF file from one directory to another directory. There is not transformation or mapping involved.
The message is send by File Sender Adapter and received by File Receiver Adapter. Message type is created as a simply type hexBinary. The file is supposed to be picked up as a PDF and received as a PDF, retaining the same file name. As such, the file name is neither stored in the source structure nor the target structure.
Once the PDF file is transfered into target directory, it should be able to be open by using Acrobat directly without further conversion.
We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
Any feedback is highly appreciated.

Hi
>>We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
No, adding file name would not hamper the properties. You can name *.pdf or something else.
For that matter any file pdf, word, .msg format etc can be transferred by this approach. We have tried it.
Earlier to SP14 you cannot give the same name to outgoing file without writing a Adapter module. But things are easy with SP14.
Cheers,
satish

The same filename from a sender to a receiver file adapter - SP14

Hi Expers,
I Have Gone through the link which is given bu Michal.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here My Questions are.........
1.Should we give any file name in the receiver side Adapter in this scenario.?????
2.How wil be the Sender and Receiver Communication channel Parameters????
What Are they???????
Please Clarify me...
Regards
Khanna

Hi Rajesh,
Is your query related to sending the file name from the source xml document to the reciever file adapter. If so this can be achieved.
Pls. do the following.
1. In the mapping program that you are using populate the filename coming from the source into the target root element.
2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time
3. To change the adapter-specific attributes of the message header by using message mappings, you access the required classes of the mapping API by using a mapping runtime constant.
Note: You donot need to specify any filename in the receiver communication channel.
To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
You donot need to hard code the value of the filename in the file adapter for your interface.
In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.
Thanks
Indranil

Find Distribution percentage from Sender Cost to Receiving Cost

Similar Messages

Maybe you are looking for