Find existing connection with server

Hi,
i have used socket programming in java. when i start the server
program ,i want to know how many clients are already connected with
particular server Port.
Is it possible? pls, Tell me

Hi,
thank you for you reply. But my need is, while server is running, client can establish the connection with server. just imagine now server has connect with 5 clients. Unfortunately server going down.
And again i start the server it should listen to already existing client connections automatically.
i want to establish the connections of existing clients from the server.
if any body having java code or other ideas for this problem , HELP ME!!

Similar Messages

Lost connection with server

For about two days now, the bbm application has refused to launch. It has been writing lost connection with server....can any one please help! It's really urgent

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

A pop-up window advising of software update for Firefox appears and does not connect with server

The window suggests strongly that I update software but when I attempt to update it does nothing but try to connect with server and never does

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.
You may need to delete active-update.xml and updates.xml as well if present.<br />
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Error message "unable to connect with server. Check wifi connection"

I started having the error message "unable to connect with server. Check wifi connection" when I attempt to use search function within a certain apps and when I try to download certain magazine (eg. National geographic). I didn't have this problem with I first started using iPad, and no problems with connectivity when using other apps. Can anyone help?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

ERROR http: 5: Unable to initialize ssl connection with server, aborting co

HI EXPERTS,
one of my database give me below error when i start its dbconsole. and after failure it give me meassge
TZ set to Asia/Karachi
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://test:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ..............................................................
........ failed.
Logs are generated in directory /u01/oracle/product/10.2/cnichol_cpuplt/sysman/log
and in trace file name "emdctl.trc" below error is logged.
ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
ERROR ssl: nzos_Handshake failed, ret=29024
and trace file named "emagent.trc" give below error
2010-10-04 19:12:25 Thread-88238992 ERROR http: 11: Unable to initialize ssl connection with server, aborting connection attempt
2010-10-04 19:12:25 Thread-88238992 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://test:5500/em/upload/: retStatus=-1
2010-10-04 19:12:38 Thread-88238992 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
dbconosle URL is
https://test:5500/em/console/aboutApplication
Operating system is Redhat linux AS 5.3
what is the possible cause of this failure any one can guide me.
thanx in Advance
regards,
Edited by: AMIABU on Oct 4, 2010 7:28 AM

oracle@bcm-laptop:~$ emctl
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
   Oracle Enterprise Manager 10g Database Control commands:
        emctl start | stop dbconsole
        emctl status | secure | setpasswd dbconsole
        emctl config dbconsole -heap_size <size_value> -max_perm_size <size_value>
       emctl status agent
       emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
       emctl getversion
       emctl reload | upload | clearstate | getversion agent
       emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
       emctl config agent <options>
       emctl config agent updateTZ
       emctl config agent getTZ
       emctl resetTZ agent
       emctl config agent credentials [<Target_name>[:<Target_Type>]]
       emctl gensudoprops
       emctl clearsudoprops
Blackout Usage :
       emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
       emctl stop blackout <Blackoutname>
       emctl status blackout [<Target_name>[:<Target_Type>]]....
The following are valid options for blackouts
<Target_name:Target_type> defaults to local node target if not specified.
If -nodeLevel is specified after <Blackoutname>,the blackout will be applied to all targets and any target list that follows will be ignored.
Duration is specified in [days] hh:mm
        emctl getemhome
        emctl ilint
Em Key Commands Usage :
emctl config emkey -emkeyfile <emkey.ora path> [-force] [-sysman_pwd <sysman password>]
emctl config emkey -emkey [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -repos [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -remove_from_repos [-sysman_pwd <sysman password>]
emctl config emkey -copy_to_repos [-sysman_pwd <sysman password>]
emctl status emkey [-sysman_pwd <sysman password>]
Secure DBConsole Usage :
emctl secure dbconsole -sysman_pwd <sysman password> [-passwd_file <abs file loc>]
     [-host <slb hostname>] [-sid <service name>] [-reset] [-secure_port <secure_port>]
     [-root_dc <root_dc>] [-root_country <root_country>] [-root_state <root_state>] [-root_loc <root_loc>]
     [-root_org <root_org>] [-root_unit <root_unit>] [-root_email <root_email>]
     [-wallet <wallet loc>] [-wallet_pwd <wallet pwd>] [-trust_certs_loc <certs loc>]
emctl secure status dbconsole
Register Targettype Usage :
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep host> <rep port> <rep sid> OR
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep connect descriptor>

Safari cannot open page unable to connect with server?

Keep running into these errors? Safari is crashing, or Could not activate cellular network data because I am not a subscriber? Cannot get mail connection with server failed? Verizon denies network difficulties....??? Suggestions would be greatly appricated! Thanks in advance!

Wi-Fi issue? Are you in a home or business environment? Have you tried connecting and re-connecting to your wi-fi network?

HT4623 unable to connect with server

Overnight my iPad sent a message that it was unable to connect with server. All other mobile devices are running fine. So I feel it is somewhere in the settings of my iPad that needs changing. I can't get on Safari or iTunes, etc., etc.

Wi-Fi issue? Are you in a home or business environment? Have you tried connecting and re-connecting to your wi-fi network?

I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
Thanks

Hi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran

TS3899 Have just uploaded iOS7 and now cannot get mail as device won't connect with server. Apple ID is ok - any suggestions?

Have just loaded iOS7 and now I cannot send or receive mail . Device message is : cannot open mail cannot connect with server. Any ideas?

Had the same problem. Deleted my account and readded it...still didn't work. Had a call with Apple, and they couldn't figure out why the Exchange server wouldn't work. They had me set up mail through Gmail, and that finally worked. There must be a bug they need to fix for the Exchange Server.

Client Not connected with Server

Hi Experts
I upgraded my Patch level from 9.0 PL8 to PL9. Server and Clients are installed and it is working fine but one PC not connected with Server. While I Connect SAP in landscape server selection Page Port Number shown as 40000 instead of 30000. I changed Port No from 40000 to 30000 the error Message came as [message 60070-99999987}. I attached the Screen shot in this discussion.
Please help me to resolve this issue.
With Regards
Balaji Sampath

I have same problem and this is the solution
Go to the directory C:\Program Files (x86)\SAP\SAP Business One\Conf
Copy the file b1-current-user.xml and put it aside
Go to the directory %USERPROFILE%\Local Settings\Application Data\SAP\SAP Business One
Check the file b1-current-user.xml which is likely empty or wrong strings
Rename the b1-current-user.xml file for backup
Move the copied file into the directory.
License server name asked every time on login

No Finder Go "Connect To Server" option

After installing OSX 10.6 I no longer have the Finder > Go > "Connect To Server" option. Command-K does not activate it. How can I connect to a known server? How can I get this option back on the menu?

Thanks!!!!
That helped me...
I could pull up a list of other computers on the network (command-k), but when I tried to connect to any one, I got looped back to the list. Wouldn't connect at all.
Deleting the finder prefs worked like a champ.
rock on.

Replacement for Finder's "Connect to Server" interface?

The Finder -> Go -> Connect to Server interface is a bit minimal, to put it mildly.
Ideally, I'd like to be able to:
• Rename the connections ("smb://192.168.1.32" isn't very helpful)
• Organize them in folders
• Sort by name, connection type, etc.
• Specify whether or not to save user/pwd in the Keychain
Anyone know of any third-party connection-manager utilities?

That's what I was thinking. I have read numerous "how-to's" about this, and all of them say that this is possible, but I think what I am really reading is "How to copy files between computers" and not "How to use a PC as a server."
Thanks again!

ITunes cannot establish secure connection with server

Why am I not able to establish secure connection with server?

Hi,
We support IMAP (yahoo/gmail/hotmail), I apologize for the inconvenience.
Best regards,
Michelle

After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on.

After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on. Can you please help?
Thanks,

Agathe.texier which copy of InCopy are you downloading and installing? Do you receive any specific error messages? Finally what operating system are you using?

I suddenly can\'t send photos out to be printed. "Can\'t connect with server"

I suddenly can't send my photos out to be printe. "Can't connect with server"

Hi,
Please refer the link below to troubleshoot the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02754298&tmp_task=solveCategory&cc=us&dlc=en&la...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Find existing connection with server

Similar Messages

Maybe you are looking for