"find file" doesn't work

The "find" function generally works, but when I try to find a file by name, it always returns "0". It works if I search for date, etc. I tried reloading the operating system--no change.

physicist42,
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP until the only messages reported are the ones listed, in this link Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

Similar Messages

JSP referencinc taglib.tld in JAR file doesn't work.

I have some custom tags which work fine under Weblogic 5.1 when I do a
 normal deployment of files, including the taglib.tld. However, when I
 try to reference the taglib.tld located in a JAR file, then weblogic
 throws an error saying that it cannot resolve into a valid tag library.
 I am only doing this because I am testing the same site agains both
 iPlanet Web Server and Weblogic. iPlanet will only find the taglib.tld
 when it is in a JAR file.
 Can anyone shed some light on referencing the taglib.tld in a JAR file.
 This should work, as it is covered in the JSP 1.1 specification.
 FYI - the jar file is in the same location as the JSP which references
 it. The URI to the JAR file (in the JSP) is from the root of the site.
 Thanks for any help.
 -Scott Edwards


Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Read From Binary File doesn´t work on MCB2400 in LV2009 Embedded ARM

Hello,
I try to read a Binary File from SD-Card on my MCB2400 Board with LV2009 Embedded for ARM.
But the output is always 0, if I use my VI on the MCB2400. If use the same VI on the PC it works fine with the same binary file.
The
access to the SD-Card on the MCB2400 works in other cases finde, if I
try to read from a text-file it works without any problems.
Are thre any constraints for the "Read From Binary File"-Node in Embedded in comparison to the same node on PC ?
I have noticed that there is also a problem
with the reading of textfiles. If the sice of the file is about 100Byte
it doesn´t work anymore, too. I can´t understand it, because I read
always just one Byte. And even if the implementation in Labview is so
bad that it allways reads the total file in the ram it sould work. The
MCB2400 has 32MegaByte RAM, so 100Byte or even a few MegaByte should
work.
But this doesn´t seem to be the Problem for the Binary-Problem. Because even a 50byte Binary-File doesn´t work.
bye & thanks
amin
Solved!
Go to Solution.
Attachments:
SD_Card_Read-test.vi ‏12 KB

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

Examine and repair iphoto library files doesn't work?

examine and repair iphoto library files doesn't work?

As a Test:
In the Source account - create a new library and try share it instead.
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Find file doesn't find and doesn't finish

With no significant events leading to the issue, ⌘F will search but never finds anything and never stops searching. Disk Utility verifies the startup volume, no problems found. Repaired permissions, still Find File will not work. Any suggestions?

Try resetting or redoing the Spotlight files with Spotless...
http://www.versiontracker.com/dyn/moreinfo/macosx/26842

My Applet Jar file doesn't work !!

hello ,
I have written this java applet :
import java.awt.*;
import javax.swing.*;
import java.applet.Applet;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.URL;
public class test4 extends Applet implements ActionListener{
 private static final long serialVersionUID = 1L;
 private JButton B1 =new JButton("Forward ");
 private JButton B2 =new JButton("Backward");
 private JButton B3 =new JButton("Left");
 private JButton B4 =new JButton("Right");
private JPanel P1 = new JPanel();
private JPanel P2 = new JPanel();
private JPanel P3 = new JPanel();
private JPanel P4 = new JPanel();
private JPanel P5 = new JPanel();
private JPanel P6 = new JPanel();
private JLabel L3 = new JLabel(" ");
private JLabel L4 = new JLabel(" ");
private JLabel L5 = new JLabel(" ");
private JLabel L6 = new JLabel(" ");
private JLabel L7 = new JLabel(" ");
JSplitPane sppSplitPane0 = new JSplitPane( );
 public test4()
 JFrame.setDefaultLookAndFeelDecorated(true);
 sppSplitPane0.setDividerLocation( 250 );
 P3.add(L4);
 P3.add(B1);
 P3.add(L5);
 P5.add(B3);
 P5.add(L3);
 P5.add(B4);
 P4.add(L6);
 P4.add(B2);
P4.add(L7);
 P1.setLayout(new BorderLayout());
 P1.add("North",P3);
 P1.add("Center",P5);
 P1.add("South",P4);
 P2.setLayout(new BorderLayout());
 P2.add("North" , P1);
 B1.addActionListener(this);
 B2.addActionListener(this);
 B3.addActionListener(this);
 B4.addActionListener(this);
 sppSplitPane0.setLeftComponent(P2);
 sppSplitPane0.setRightComponent(P6);
 public void actionPerformed(ActionEvent e) {
 try {
 if (e.getSource() == B4) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?R");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else
 if (e.getSource() == B3) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?L");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else
 if (e.getSource() == B2) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?B");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?F");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 } catch (Exception err) {
 System.err.println("Error!\n" + err);
 showStatus("Error, look in Java Console for details!");
 public static void main(String[] args) {
 test t=new test();
 JFrame frame =new JFrame();
 frame.add(t.sppSplitPane0);
 frame.setSize(1100,700);
 frame.setVisible(true);
i made a jar file :
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!
please help me .
Edited by: Amera on Dec 27, 2009 2:51 PM

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Jar file doesn't work

I am quite new to java so I hope my question is not stupid.
I used bluej to realize an application.It works when executing the main method in bluej,but when I create the jar file,it simpy doesn't work.I have included the main class when creating the jar file.When double-clicking on the jar file, it makes the typical error sound of windows,but it doesn't show any message.
What is the problem?

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

InDesign CS6: "find" function doesn't work in "Open a file" dialog box

in InDesign CS6, "find" function in "Open" dialog box doesn't work. Help?

Thanks so much!
I'm using a Mac OS X version 10.7.5. I've been using inDesign for YEARS and depend on that find.
Any other info you need????

Find/search doesn't work in Finder - help!?

I go into finder and I type in a file name to search my computer for. No matter what volume or folder I select, nothing pops up in the search window - no files, no folders, nothing. Finder just sits there. The find command doesn't seem to work. Can anyone help me fix this? I really need to find files on my computer and don't have time to sift through every folder one by one. Thanks!!!

Hi, Todd —
Welcome to Apple Discussions.
I'll assume that you're talking about using Spotlight via the Finder »» Find (⌘-F) command. If I'm wrong about this, please post back to clarify the specifics.
If nothing at all can be found, it's possible that you have inadvertently included your HD (or a significant Volume, your Documents folder, etc.) in the Privacy tab of Spotlight's preferences — which keeps it from being indexed. If the "metadata" associated with a file or folder aren't included in the indexing, they can't be searched and included in results.
To check this, look first in System Preferences »» Spotlight »» Results — are any of the boxes checked? Only those that are will be searched. Are they in the order you'd like to see results reported? Next, look in System Preferences »» Spotlight »» Privacy. Does anything appear in this window? Anything that does will not be indexed, and thus won't be included in a search. If it is the Volume (or folders, etc.) that you want to be searched, select its name and click on to remove it.
Spotlight will then begin to index whatever had been set as "private" — which essentially means "don't search." Note that this may take some time. The Spotlight icon at the far right side of your menu bar will show a tiny "pulsing" dot while indexing is ongoing.
You may want to go to Finder »» Help »» Mac Help, type in "Spotlight find," and hit return. Several useful articles on this subject will appear that will help to explain this. Here is a list of corresponding Apple "Help" articles online.
Does this help?
Please post back to share your progress, and discuss other possibilities, as appropriate...
Regards,
Dean

'Find' function doesn't work on some HP documents

For some pdf doc's I downloaded from HP, if I copy some characters from the text and then paste them into the Find box, the characters show up as hieroglyphs (mostly squares) in the Find box. And then actually executing the Find using those characters doesn't work, because it can't find the very word that I copied them from! On top of that, if I manually type a word into the Find box (showing normal letters), it won't find it even though I can see it within the text on the page showing on the screen. Very strange! In documents other than these old HP documents, the Find function works fine.
I looked into the document properties (menu: File >> Properties >> Fonts) and see that there are 9 fonts that have names I have never heard of before, and those fonts say "(Embedded Subset)" after the font name and "Encoding: Custom" in the font descriptions. There were a few normal fonts listed before these for that document as well.
Anyone have any idea what is going on?
- Brad

It's hard to say without seeing the actual, source content, but given what you are describing, I would venture a guess that the source content is of too poor a quality to OCR reliably and accurately. To test this theory, after running OCR, identify a term that you can confirm is present, but that the search feature cannot identify. Then, copy and paste that term into Word or Notepad. What I expect you will note is that a "0" (zero) has been identified as an "8," and other things of that nature. OCR processing is garbage in, garbage out, so the source always has to be considered. Repeat this process across the document to see if experience similar results.
You don't describe how exactly you are transferring the microfilm "images" to PDF, so it's difficult to say if that process is at issue or could be improved. I suspect that's contributing to the problem, though.
Finally, with regard to the degraded image quality, you want to make sure you are selecting "Searchable Image (Exact)" from the OCR dialogue. ClearScan or any type of downsampling will likely cause or contribute to the type of issue you are describing. In a situation with low-quality source material, you would not want to use these other options.
Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
www.pdflitigationguide.com

Finder sidebar doesn't work for networking?

Does anybody else find that the sidebar in finder doesn't work when you network your computer to a pc network? I SEE the file servers when I click on "all" but when I double click on one of them it always says "connection failed". The only way I can access the network is to go to "Go" then "connect to server" then type in smb://ipaddress and have the server directly mounted to desktop (after changing finder preferences to show mounted volumes on desktop). Does the finder sidebar just not work then in leopard or am I doing something wrong?

When you click on it, it will try and log on as user guest with no password. This will nearly always fail on a windows box.
top right of the window pain there should then appear an option to 'connect as', click this and type in a valid username and password. Tick the box to add it to your keychain and it should then always connect when you click on the sidebar.

ActiveDirectory mapping file, doesn't work for login

The mapping file below works.
Logged in as administrator, in the SAP NP administrator web tool,
I can see and edit users in the datasource (Active Directory).
However, when users in the AD try to login to the portal, they get "User authentication failed".
Default trace log show:
Authentication failed on LDAP server: back end message [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 775, vece]
and
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key DS_AD_I
Any ideas on what in the configuration file below,
that could cause these errors ?
====================================
Configuration file
====================================
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE dataSources SYSTEM "dataSourceConfiguration.dtd">
<dataSources>
 <dataSource id="PRIVATE_DATASOURCE"
 className="com.sap.security.core.persistence.datasource.imp.DataBasePersistence"
 isReadonly="false"
 isPrimary="true">
 <homeFor>
 <principals>
 <principal type="group"/>
 <principal type="user"/>
 <principal type="account"/>
 <principal type="team"/>
 <principal type="ROOT" />
 <principal type="OOOO" />
 </principals>
 </homeFor>
 <notHomeFor/>
 <responsibleFor>
 <principals>
 <principal type="group"/>
 <principal type="user"/>
 <principal type="account"/>
 <principal type="team"/>
 <principal type="ROOT" />
 <principal type="OOOO" />
 </principals>
 </responsibleFor>
 <privateSection>
 </privateSection>
 </dataSource>
 <dataSource id="AD_I"
 className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
 isReadonly="false"
 isPrimary="true">
 <homeFor/>
 <responsibleFor>
 <principal type="account">
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="j_user"/>
 <attribute name="logonalias"/>
 <attribute name="j_password"/>
 <attribute name="userid"/>
 </attributes>
 </nameSpace>
 </principal>
 <principal type="user">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="firstname" populateInitially="true"/>
 <attribute name="displayname" populateInitially="true"/>
 <attribute name="lastname" populateInitially="true"/>
 <attribute name="fax"/>
 <attribute name="email"/>
 <attribute name="title"/>
 <attribute name="department"/>
 <attribute name="description"/>
 <attribute name="mobile"/>
 <attribute name="telephone"/>
 <attribute name="streetaddress"/>
 <attribute name="uniquename" populateInitially="true"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
 </attributes>
 </nameSpace>
 <nameSpace name="$usermapping$">
 <attributes>
 <attribute name="REFERENCE_SYSTEM_USER"/>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="group">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="displayname" populateInitially="true"/>
 <attribute name="description" populateInitially="true"/>
 <attribute name="uniquename"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE"/>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.bridge">
 <attributes>
 <attribute name="dn"/>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 </responsibleFor>
 <attributeMapping>
 <principals>
 <principal type="account">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="j_user">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="logonalias">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="j_password">
 <physicalAttribute name="userPassword"/>
 </attribute>
 <attribute name="userid">
 <physicalAttribute name="null"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="user">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="firstname">
 <physicalAttribute name="givenname"/>
 </attribute>
 <attribute name="displayname">
 <physicalAttribute name="displayname"/>
 </attribute>
 <attribute name="lastname">
 <physicalAttribute name="sn"/>
 </attribute>
 <attribute name="fax">
 <physicalAttribute name="facsimiletelephonenumber"/>
 </attribute>
 <attribute name="uniquename">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="loginid">
 <physicalAttribute name="null"/>
 </attribute>
 <attribute name="email">
 <physicalAttribute name="mail"/>
 </attribute>
 <attribute name="mobile">
 <physicalAttribute name="mobile"/>
 </attribute>
 <attribute name="telephone">
 <physicalAttribute name="telephonenumber"/>
 </attribute>
 <attribute name="department">
 <physicalAttribute name="ou"/>
 </attribute>
 <attribute name="description">
 <physicalAttribute name="description"/>
 </attribute>
 <attribute name="streetaddress">
 <physicalAttribute name="postaladdress"/>
 </attribute>
 <attribute name="pobox">
 <physicalAttribute name="postofficebox"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
 <physicalAttribute name="memberof"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="$usermapping$">
 <attributes>
 <attribute name="REFERENCE_SYSTEM_USER">
 <physicalAttribute name="sapusername"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="group">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="displayname">
 <physicalAttribute name="displayname"/>
 </attribute>
 <attribute name="description">
 <physicalAttribute name="description"/>
 </attribute>
 <attribute name="uniquename" populateInitially="true">
 <physicalAttribute name="cn"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE">
 <physicalAttribute name="member"/>
 </attribute>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
 <physicalAttribute name="memberof"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.bridge">
 <attributes>
 <attribute name="dn">
 <physicalAttribute name="null"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 </principals>
 </attributeMapping>
 <privateSection>
 <ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
 <ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
 <ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
 <ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
 <ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
 <ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
 <ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
 <ume.ldap.access.server_name>machine.company.com</ume.ldap.access.server_name>
 <ume.ldap.access.user>[email protected]</ume.ldap.access.user>
 <ume.ldap.access.server_port>389</ume.ldap.access.server_port>
 <ume.ldap.access.base_path.user>OU=Users,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.user>
 <ume.ldap.access.password>$ume.ldap.access.additional_password.1</ume.ldap.access.password>
 <ume.ldap.access.base_path.grup>OU=Groups,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.grup>
 <ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
 <ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
 <ume.ldap.access.objectclass.grup>Group</ume.ldap.access.objectclass.grup>
 <ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
 <ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
 <ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
 <ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
 <ume.ldap.access.naming_attribute.grup>cn</ume.ldap.access.naming_attribute.grup>
 <ume.ldap.unique_user_attribute>samaccountname</ume.ldap.unique_user_attribute>
 <ume.ldap.unique_uacc_attribute>samaccountname</ume.ldap.unique_uacc_attribute>
 </privateSection>
 </dataSource>
</dataSources>

<?xml version="1.0" encoding="UTF-8" ?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>WebApp</display-name>
- <welcome-file-list>
<welcome-file>login.html</welcome-file>
</welcome-file-list>
- <error-page>
<error-code>404</error-code>
<location>/Error.html</location>
</error-page>
<jsp-config />
</web-app>
This is a very simple war with no component and an error page is defined. But this doesn't work. When I type something like /loginnnn.htmllll, it doesn't give me the error page. That is my problem. Any idea???

Link to a file doesn't work anymore

I repeteadly made this experience: I link some text to a file and upload it via .mac. However, when I change the file, the link doesn't work anymore. Even if I set up the whole thing again and upload it, it doesn't work.
Seems like I get one chance per link and that's it.
Does anyone know how to get the link working again?
Message was edited by: Christian Stahl

I just started using iWeb last night for the first time and ran into the same (or similar) problem. I did it kind of backwards but that shouldn't matter I wouldn't think. I also came across another problem with text which was not supposed to be a hyperlink but ended up being one and one I couldn't turn off.
I created a text field, typed in some text, then made the text an active hyperlink and attached the link to a file. That first one worked OK. Then I copied and pasted that text field about ten times, changed the text slightly and set each text field to another different file link. I then published and tried the links using Safari. The first few links worked fine and the files were automatically downloaded to my downloads folder. However, clicking on the last few links downloaded files from the other previous text links instead of the ones they were supposed to even though the inspector shows the correct files. I even tried doing new text fields and new links but they still don't work correctly.
The other problem is that I created some more text fields to be used as descriptions for the file downloads by copying a hyperlinked text field. I realized after the copies were made and I had spent some time changing the text that these text fields carried over the linked hypertext attribute. Since I didn't want to type everything out again from scratch, I just turned off the hypertext link attribute in the inspector. However, after I saved the web site and then published the site, I discovered that the text was still linked to a file download. I went back into iWeb and that hypertext checkbox was now checked. I turned it off several times but every time I publish, it turns it back on by itself.
I am going to create the entire page over again from scratch and try the method of dragging files from the finder to initially create the link (got that from the help file).
Also it would be nice to have better/more file download features in iWeb such as being able to access a file picker where the web user could select files s/he wanted to download instead of requiring one button per file. Also, some way to automatically compress into one download a selection of several files.
-R

Find Topic Doesn't Work for Priorities

In the Topic List pod I want to Find Topics by priority but it doesn’t work. Here’s what I’m doing:
1.      Ensure at least one topic has a priority of ‘1’.
2.      Click on the Find Topic icon and select the Advanced tab.
3.      Enter a string in the File Name Includes field (e.g., reports) that returns a set of Found Topics that include the topic I have set to priority ‘1’. At this stage, I can see in the Found Topics that it is actually priority ‘1’ (see first image below).
4.      Change the priority dropdown to ‘higher than’ and leave the corresponding text field set to ‘5’.
The result is ‘No topics found’ (see second image below).
I’m hoping someone can point me in the right direction. I’m using RoboHelp 9.0.0.228.

That works!
I was thinking that 1 was the highest priority when the filter was just working on a simple numerical value.
Thank you!

Create AAC from Wav file doesn't work

I've converted many WAV files to AAC and it worked fine. The last few times I've tried it it isn't working. I hear the bleep which I think indicates it's been converted but I can't find it anywhere so assume it didn't happen.
I have Windows XP. I am running iTunes 10.3.1.55
Any ideas would be appreciated.
Thanks,
Ginny

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

"find file" doesn't work

Similar Messages

Maybe you are looking for