Find folder with incompatible applications created during system upgrade

When I upgraded to Lion the sustem placed all incompatible software into a hidden folder. Kaspersky antivirus was places there. I purchased eset antivirus. When I asked it to update it asks me to uninstall kaspersky. Even when I ask finder to show hidden files I cannot find kaspersky. Does anyone know what my solution is?

jeanfromct wrote:
When I upgraded to Lion the sustem placed all incompatible software into a hidden folder. Kaspersky antivirus was places there. I purchased eset antivirus. When I asked it to update it asks me to uninstall kaspersky. Even when I ask finder to show hidden files I cannot find kaspersky. Does anyone know what my solution is?
Best solution is to uninstall with either the uninstaller that came with it or one from the product's support site.
Once uninstalled keep it uninstalled. There are no known viruses that attack OS X and it will cause many more problems than it solves, like none.
Also, forget the other AV. These will only cause problems for you.
Try your Go menu > Computer > Macintosh HD

Similar Messages

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resourc

Everytime I open Safari on my MacBook Pro a pop-up window from my Finder menu, with the Applications highlighted on the left in the favorites column with the Resources folder highlighted comes up and locks my Safari page until I manually close the Resources window then I have to refresh the internet search address line at the top of Safari. Can someone tell me how to stop this. It started after a software upgrade. It didn’t do that before. Thank you.

A few thoughts for diagnosis/testing purposes:
Have you recently run the disk utility and repaired HD and permissions? If not do so.
Boot into the Safe mode - hold down shift key on boot - and see if the problems are still there. Some functions won't work but see if anything odd happens.
Check your startup items. Get rid of them temporarily.
Create a new user account and see if the problems occur with the new account.
Lastly, be sure your backup is up-to-date.

Finder folder with question mark, now will not start at all!!!

Hey guys, I was working in Avid and i opened up Quicktime, all of a sudden i got a crash log. So i restarted, upon restart i got the finder folder with the blinking question mark. I tried restarting with the OS9 cd by holding down the C button, no luck there. So i moved onto the next step, resetting the PRAM, no luck there (just sat on black for numerous minutes until i let up, then the folder came back). Then I moved onto resetting th PMU, now it will not start up at all. I restart, and all i see is a black screen, nothing. Any help appreciated. Thanks in advance.
The machine im workin on is a Powermac G4 (quicksilver), OS9, 1.5 G Ram, machine bases around Avid Editing system
Rhyno

Ok let me clarify this.
1)system crashed restarted and got the folder with the ?
2) tried to boot from the OS 9 CD no luck? it did not boot?
3)reset pram and still the flashing ?
4) Reset the PMU chip and the mac is dead won't start up at all?
a couple of ideas too...
did you press the pmu button more than once?
Check to make sure the power cord is plugged in correctly etc.
Check the Pram battery to see if it might be dead it should read between 3.3v and 3.7v
also try to restart the computer without other devices plugged into it (USB Firewire, keyboard, even monitor.
hmm...
iBook G4 Mac OS X (10.4.3)

IMac wont boot Past Grey Screen, finder folder with blinking question mark

iMac G5 won't boot Past Grey Screen. The G5 froze and i restarted, It will not go past the grey screen and it has the finder folder with blinking question mark, also the fans kick on wide open. As it atempts to boot a sound plays "beepda beepda beepda beep" that starts quiet and gets louder and repeats a couple of times. I ran a hardware check on the startup disk and all hardware passed. I thought it might be the RAM any suggestions?
I have restarted using the troubleshooting methods in the guide.

Sorry for the late reply. The drive shows up when booting to disk, but it will not allow you to verify disk or repair. Also it will not allow you to select the hard drive to reinstall the software. Under disk utility Maxtor sabre shows up with total capacity:0 bytes.
I've taking the Mac to the Apple store to get looked at, and its probly the hard drive. Now Im trying to see if theres a way to recover the data myself. I've used software like "Data Rescue" the hard drive shows up "Maxtor Sabre" totally capacity: 0 bytes, and it will not recover anything.
Did this test just to see if it was power problem.
http://support.apple.com/kb/HT2173
Thats when noticed the beeps are coming from the hard drive. So its getting power.
Now just wondering how to recover data.
Any suggestions?

Trying to write an Automator program to find files with same time created and change file names to matching source folder names

I am failrly green when it comes to automator.
I am trying to write an Automator program:
Not sure where to post this
trying to write an Automator program to find files and alter their names
I have a source folder with correct named master files in it.
eg. A0001_1234.mpeg
time created 14:02:03
date 07/07/2012
Another folder where there will be copies of the master files in a different format with different names but created at the same time as a file in the source directory.
they are created with a seperate device but they are
A0000001.mp4
time created 14:02:03
date 07/07/2012
I need it to then take the name from the source fies and apply the correct name to the matching file based on the time it was created.
I can't seem to find actions in automator that reference time crated.
Is this something I will be able to Do in automator?
Any help would be great
Thanks
R

Hi,
It's impossible to do this without any script in Automator.
Use this AppleScript script :
set source to choose folder with prompt "Select the source folder"
set anotherfolder to choose folder with prompt "Choose the another folder"
tell application "Finder"
    repeat with tfile in (get files of source)
        set cDate to creation date of tfile
        set findFiles to (files of anotherfolder whose creation date is cDate)
        if findFiles is not {} then
            set tName to name of tfile
            set name of item 1 of findFiles to tName
        end if
    end repeat
end tell

Opening a folder with an application in one click, and automating Terminal

A forum member kindly recommended I move a question from 'Mac OS X Leopard' to this sub-forum as it was more appropriate to Unix:
Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
1. Load Terminal by clicking on the icon in the dock
2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
4. 'CMD + T' (to open up a new Terminal tab)
5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
6. 'autotest' (to runs the tests in the rails application)
7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
Cheers

you can try this applescript. just copy it into the Script Editor and save it (1) as a script application that you can double-click, or (2) as a script that you can run from the script menu or quickkeys or etc. may need some tweaking...
<pre class="jive-pre">tell application "Terminal"
set cmd to "cd sites/rubyonrailsapp; mate ."
do script cmd
activate
end tell
tell application "System Events"
keystroke "t" using command down
end tell
tell application "Terminal"
set cmd to "gitk --all & autotest;"
do script cmd
activate
end tell
tell application "System Events"
keystroke "t" using command down
end tell</pre>
to solve your other question, you'll probably need to script textmate. something like:
<pre class="jive-pre">tell application "TextMate"
open alias "path:to:folder"
end tell</pre>
I don't have textmate to test it on, however.
sorry it's not a unix solution, but the task you're trying to accomplish fits better with applescript.
Message was edited by: twtwtw - sorry, wrong quote style...

Can I include raw files into the installer folder with LV application builder?

Hello,
I have created a batch file that will run at the end of the installer, which will copy over some raw configuration files into the source destination so that the configuration files can be customized for each end user without rebuilding the installer with application builder. I also have an autorun.inf so the installer will automatically run when the user installs the CD.
However I would like to have some default configuration files and an autorun.inf file that will be automatically added to the installer "volume" folder using the application builder.
However I don't see a way to include raw files in the "volume" folder. It appears all source files in the application builder are embedded into the binary files.
Please let me know if this is possible with the current application builder.
Regards,
Russell
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

Russel,
i think this link might give you some good hints....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Opening a folder with an application in one click, and automating a process

Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
1. Load Terminal by clicking on the icon in the dock
2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
4. 'CMD + T' (to open up a new Terminal tab)
5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
6. 'autotest' (to runs the tests in the rails application)
7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
Cheers

Thanks
Here's the new post;
http://discussions.apple.com/thread.jspa?threadID=2070033&tstart=0

Blinking question mark folder with only OS X base system left

Yesterday I turned my laptop on to see a blinking question mark folder. I searched through a lot of people questions with the same problem however mine is not the same because I only have the OS X base system left. I can't redownload the OS X lion because there is nothing to download it after I chose the option to redownload it. I see that most people have the Macintosh HD but I don't have anything like that.
disk1
Mac OS X Base System
that's all I see when I try the repair option?

Have you tried booting to your Recovery HD (if you are running Lion or Mountain Lion?) If not and if you were running Lion or Mountain Lion, then:
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

!How to find out follow up activities created during creation of an Order??

Hi Gurus,
I want to find out the number of follow up activities created during creation of an Order??
Is there any BAPI or Function Module which can detrmine the number of follow up activities after creation / saving an Order..
Please Reply fast.
Thanks
Pranay

Hi Pranav,
I am confident this will solve your problem:
Step 1.
Enter the guid of the current order into function module
CRM_DOC_FLOW_READ_DB.
Code:
DATA : t_doc_links TYPE crmt_doc_flow_db_wrkt,
 v_guid TYPE crmt_object_guid.
v_guid = <guid of the order from table crmd_orderadm_h>
CALL FUNCTION 'CRM_DOC_FLOW_READ_DB'
 EXPORTING
 iv_header_guid = v_guid
 IMPORTING
 et_doc_links = t_doc_links
 EXCEPTIONS
 error_occurred = 1
 OTHERS = 2.
Step2.
Now loop through the returned table ie t_doc_links.
Records which fulfill the following criteria are
the follow up records.
reltype = 'VONA'
objtype_b = 'BUS2000126'
objkey_b = v_temp
roletype_b = 'NACHFOLGER'
roletype_a = 'VORGAENGER'.
Step:3
Now Count the records which fulfill the above creteria.
This count represent the number of followups created.
REWARD THE ANSWER WITH FULL 10 POINTS IF UR PROBLEM IS SOLVED.
thanks,
ashish.

Windows (8.1) could not find back up devices while creating a system image (0x80070003)

I am trying to create a system image backup under Windows 8.1 Windows Backup is unable to find a backup device with error (0x80070003). No drives are shown under "On a hard disk" and select <Refresh> gives the same error.
A LaCie 1Tb external harddisk is connected to the PC and formatted as an NTFS drive. The hard disk is visable under Harddisk Management and shows up under Explorer mapped as Drive D:
Any thoughts?

Hi,
As you mentioned, the Drive D is mapped from your external harddrive. How did you connect this hard drive into this computer?
If it was connected via network, Please choose "On a network location" and locate the harddrive to check the results.
Kate Li
TechNet Community Support

Compressor is not a finder "open with" recommended application for qt's

On my macbookpro If I select a quicktime file in the finder and go to the file:open with:recommended applications, compressor is not a choice. I can easily choose it as a nonrecommended application, but it's a bit of a pain. The same is true for a quicktime export from fcp (the first quicktime export option, not quicktime conversion) which has a fcp icon not a qt icon. On my G5 tower, qt files do have compressor as an option for open with, but fcp exports, do not.
Obviously I could change the "open with" option in the file info for either an individual file or all files of this type, but I just want compressor available in the "open with" list for either file type.
This ain't a deal breaker, just a minor annoyance.
Message was edited by: Michael Grenadier

What version of FCS/FCP, Michael?
If you're using FCP 5.x, the issue with QuickTime Movie exports from FCP is because those movies do not have an .mov extension. You can't drag them to the Compressor icon on the dock and force Compressor to open, for instance, like you can for anything else that actually has a .mov extension.
As far as opening QT movies with Compressor, mind explaining why you're doing this? That is, you're opening them in Compressor for previewing purposes, correct?

Shadow system during system upgrade

Hi All,
I am new to upgrade.I would like to know about Shadow System, how it will be created, what happens during the switch between the shadow and original system.
I had read the following blog which helped me to get clarity in the introduction part.
SUM: introduction to shadow system
Appreciate if anyone can explain and share some document on this.
Cheers,
Febin Roy

Hi Febin,
If you are working on SAP upgrade project you will come across to this term – shadow system or instance and system switch.The background upgrades process. Basically by upgrade we want to get the newest functions that provider offers in its software product that we are currently using. For sure we want to get this done without an interruption to existing, running system. In reality there is always some interruption. We are just trying to minimize it as much as possible. So does the SAP. The background of shadow system is to minimize system downtime during the upgrade.
Shadow system is basically copy of system that is going to be upgraded. This copies system is a bit limited to original one. It has only technical repository (SAP Basis objects) of objects and you cannot run your business processes on it. More over technical repository is upgraded into version of final release of to be upgraded system. Technically speaking it is used for modification adjustments (famous transactions SPAU and SPDD) and activation of objects. All the support packages and add-ons are imported into this instance as well. By them you get you system to the higher release. Let me mention also that shadow system run in the same database as its original system. They are running in parallel.
During preparation of shadow instance you are still running your original SAP system where all the business processes are being executed normally. At the moment when shadow instance is prepared we do its switch from shadow to original system. This is called system switch when you kind of “exchange” original system with shadow one. By that time shadow system becomes upgraded system.
Regards,
Deva

How to create a folder with java application?

Hi expert
I would like to read some tutorial or manual to understand the logic behind the management of the folder and document from a java application in KM.
Anyone could help me?
thank you
Andrea

Dear Andrea,
Please have a look to below documents might help.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a2a087-190f-2d10-07a4-dad666b44c1f?QuickLink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/Snippets/KMLibrary-ReusableComponentforWebDynpro+Java
Best Regards,
Arun Jaiswal

J2EE Cluster is not created during system copy.

Hi all,
Iu2019ve been trying to perform a system copy on our PI 7.0 sp14 test system & create a second system on the same server.
I used the standard Sapinst tools for this because it is a PI ABAP+JAVA system.
The copy process went smooth but after it finished I realized that the ABAP side has been installed correctly but when I tried running "SXMB_IFR" I saw that the system points me to the source system J2EE process.
Looking into the file system of the target system, I saw that under the path \usr\sap\<SID>\<Instance>\j2ee\cluster only the bootstrap folder exists. Of course that in the SAP MMC, you cannot see any J2EE process under the new system process list.
I tried using a newer sapinst but that didnu2019t help.
Anyone ever encounter anything like that?
Thanks for your help.
Regards,
Yoav Zilberman

He again,
Now i finally managed to make all the J2EE process work but i keep having issues with the "server0" process in both systems on the server.
the first system i starts works fine but the second one will get the error: [Thr 8944] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\XIQ\DVEBMGS00\exe\jvmx.jar ; (SID changes according to which system started first).
Thanks,
Yoav

Find folder with incompatible applications created during system upgrade

Similar Messages

Maybe you are looking for