Find Friends "geofence tracker" was on but not placed? Is that possible?
I will try and be brief. My boyfriend came to me upset and deleted FF because I had a fence around him. I had no clue what that was. He didn't show me just deleted it. About 4 months ago I did a notification but deleted it right away. I have received no notifications at all as to his comings and goings. Is it possible that from back when I set up the notifications it set up this fence? I am positive I cancelled the original notification. Just wondering if there is a glitch. Caught me off guard when he hit me with this. Any info would help, thanks!
Seriously, you have bigger issues. If your boyfriend is deleting things from your phone without your permission and without actually explaining to you what he was upset about, the problem is not Find Friends.
In order for you to see him on Find Friends, he would have had to have invited you to do so.
Put a passcode on your phone.
Best of luck.
Similar Messages
-
my ipod has been stolen i used find my iphone it told me last time it was found but not were it is help please!
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
Find My Mac can be used from Find My Phone at iCloud.com and via Find
My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0
9. Prey 0.6.2 -
Can i find a file that was scanned but not renamed?
can i find a file that was scanned but not renamed?
Hi johnathong,
Did you scan the file directly into Acrobat, but didn't save it? If so, the file is most certainly lost, and would need to be rescanned.
If I misunderstood your question, please let me know.
Best,
Sara -
Newbie: XML/Java - The entity "rsquo" was referenced, but not declared.
I get the following error when I try to run my java program(it's supposed to read an xml file and print out some of the content).
How can I fix this problem?
Thanks,
[Fatal Error] subject.xml:4:233: The entity "rsquo" was referenced, but not declared.
org.xml.sax.SAXParseException: The entity "rsquo" was referenced, but not declared.
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at DomParserExample2.parseXmlFile(DomParserExample2.java:42)
at DomParserExample2.runExample(DomParserExample2.java:24)
at DomParserExample2.main(DomParserExample2.java:115)
Exception in thread "main" java.lang.NullPointerException
at DomParserExample2.parseDocument(DomParserExample2.java:54)
at DomParserExample2.runExample(DomParserExample2.java:27)
at DomParserExample2.main(DomParserExample2.java:115)The easiest way to fix your problem is to not put unreferenced entities into the document. That just makes the document be not well-formed. If somebody else gave you that document, send it back to them and tell them to fix it. If you made it yourself, then you did it wrong. It's hard to say how you did it wrong because you didn't say anything about that.
If you were hoping for some Java code, there isn't any. If you get an XML document which isn't well-formed, all you can do is to reject it. And that's what happened there. It's the correct thing to do.
That tutorial you linked to is correct as far as it goes, but in your case you've just got some HTML which somebody carelessly reformatted into XML. You don't want to write an EntityResolver for HTML entities, you either want them to not be there, or for there to be a DTD at the beginning which points to something declaring them. -
Workflow need to start at the node where it was rejected but not frm start
Hi,
I have a scenario where the workflow is a employee resignation custom workflow.
Here the case is - when ever the reviewer or the approver rejects the workitem in the workflow the workflow stops and it returns back to the initializer ie the employee who has resigned...
the moment the employee makes the required changes the workflow starts from the 1st level where as the workflow should start at the point it was rejected but not from the start.....
The point where it was rejected, or the level where it was rejected it has to start at the same level but not from the start or the 1st step of the workflow...
Kindly suggest me that how do i place the scenario where the workflow starts at the node where it was rejected intially...
Thanks in advance,,,
shankyHi,
Here what i am doing is
I am running a loop based on the levels there in the entire workflow
Here there are 8 levels in the workflow, so rather going for 8 consecutive step workflow. I have placed the entire step in one loop to robust the entire process...
Placing all the levels in one condition, and running the loop. I am trying to capture the Approval or Reject status after every loop run to see the status and based on that - the level will be determined
My question over here is - Once the loop is run and i am able to determine the status - whether it is a rejection or an approval.
as the values are stored in a workflow container or in "z" table (varies from situation to situation) -
I did not understand that - how do i place the method ( which determines the level ) and at what position..should it be in the loop or after the loop...
kindly clarify this as this the only major concern which i have...
thanks,
shanky
Edited by: shanky s on Oct 24, 2010 10:56 AM -
When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
My apple password was reset but not by me. any one else have this problem?
My apple password was reset, but not by me, also an email showed up but when i went to click into it, it wasn't there anymore and was not even in my inbox.
If you have never shared your password with anyone then your account was hacked. NOT your iPhone, your Apple ID. If you use the same password for other accounts any of them could have been hacked, and your password obtained from that other account. If your password was simple it could have been hacked by brute force. If it is a word found in any dictionary especially. Or if there is anything personally identifiable about it (nickname, pets name, address, name of someone you know).
The really important thing is to get it resolved QUICKLY with Apple Security, and to change all passwords that might have been stored in an iCloud backup of your phone. -
My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks
The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/ -
i updated my iphone 3g to ios4.2.1 ... the update was succesful but nw itunes says that sim card inserted in this phone is not acceptable and also states that on;y compatible sim from supported carrier is acceptable !!! kindly suggest ...
horsie10 wrote:
i bought my iphone in USA and im using it in india .... kindly hellp me how can i resolve this problem !!!
It has NEVER been possible to purchase an unlocked iPhone 3G in the US. Your phone was hacked. Updating it has re-locked it to AT&T. AT&T will NOT unlock iPhones for any reason.
The phone is now useless to you. There is no legitimate way to fix this. Buy a new phone. Preferably in India. -
sms code for verification does not reach to my mobile. ? i can not access my e-mail because of code that does not sent right now. code that related to my alternated e-mail was sent , but not to mobile
Bugzilla is not the place for this sort of problem. Forwarded this post to the relevant team.
-
Hi where can I find my all iPhone back up, but not on iTunes , but in the folders
Hi where can I find my all iPhone back up, but not on iTunes , but in the folders
~/Library/Application Support/MobileSync/Backup/
Where the "~" (tilde) represents your Home directory
/Users/username/Library/Application Support/MobileSync/Backup/
Note these backups are not in human readable form. -
I have been doing itune for years and this one's puzzled me?
Hi im a newbie here and i recently bought an iphone from a friend (wahh i know i should have bought it legitly but i wasnt paying that price sorry),
I have a 32 GB Black Iphone 4s and theres a problem.
Yesterday i decided i wanted music on my phone and decided to sync my phone to my itunes and computer..
But lets backtrack first... Earlier in the day i decided to plug a (non iphone heaphone into the headphone port) and much to my ssureprise it worked (all ive ever dealt with is blackberry) unplugged the headphones and a few hours later this is where i synced my phone tried to play music an GASP nothing..in the music app the volume nubs are gray and cannot be moved left or right and no sound is being heard.. also when i tried to check to see if my ringer was going up and down it was displaying the little speaker but not the bar that moves. Read the discussions here and it seemed that we've all been screwed now i love my iphone and all its features only phone ive ever wanted but i would love this to be fixed.
I have tried:
Restting all setting
Hard Reset
Restore
Restore from back
Changing everything imaginable in Setting and nothing has worked
Making a voicenote and i actually got sound and my ringer started to work! YAY right.. WRONG
Cleaning it with nail polish removeer
Brushing it with a brush
Using a paperclip and scraping it
*i did find some fluff but it came out*
After a few futile attempts at trying to play videos and games with sound and getting nothing i have decided its time to put my tail inbetween my legs and hope that someone can help.
Im not sure if was the type of headphones that i used or hat but i need help
PLEASE REPLY I NEED MUSIC
I AM ALSO A YOUTUBER AND FILM OFF MY IPHONE AND I NEED TO HEAR WHAT **** I AM TALKING AT THE END OF A VIDEO
THANK YOU -
Mail doesn't send e-mail. Before yesterday everything was ok, but now it says that a copy of the message has been added to "sending messages and the content of the message cannot be sent to the server". All the data in IMAP is ok. What to do?
thanks for replying!
When sending from one mac email account to another email account on the mac it seems to send fine, and it moves to the sent items, but nothing appears in the mac inbox.
When sending from a mac account to the pc, it seems to send fine, and it moves to the sent items, but nothing appear in the PC inbox.
When sending a massage from the PC to my mac email, it send fine from the PC and arrives in the inbox on the mac.
mac to mac - seems to send but dosent arrive
mac to pc - seems to send but doesnt arrive
pc to mac - seems to send and arrives.
As i said it was all working fine yesterday and for four years previous to that, but now it has just stopped.
I hope you can help. -
i have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds
Are the ones from the CD's on iTunes? You may just have to sync them over to the phone.
-
I have the latest version but I am continually told that Firefox is running but not responding and that I need to close Firefox or restart my computer to clear the problem. Why is this happening?
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs
See also:
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
Maybe you are looking for
-
Looking for a high-res drawing app for the iPad
I've tried a few of the available iPad drawing apps like Sketchbook Pro and Brushes. It's a little hard to tell, because documentation tends to be short on details, but it appears that most of them (with the exception of Brushes) only let you work an
-
I cannot send email from iPad just get maeesage saying copy sent to outbox,but I can receive incoming mail.problem started after using dictation a couple of times I can send from my computer though anyone help me please
-
Photo in video cut when going from "Quick" to "Expert"
I created a video using Premiere Elements 11. I used a video I took on a Canon T3I and pics saved on the computer and edited using Photoshop Elements 11. I created the video with the Premiere Elements 11 set to "Quick." With the video created this
-
Time and date are set incorrectly on the routers and switches
I've just noticed that the date and time on all my Cat4006's, Cat3548's and Cat6000 were grossly incorrect. I was wondering if this would contribute to problems I am having on the network. Does the switches/routers check the timestamp on the packets
-
How to limit the size of large core file
These days in my project I am facing big trouble of large core files . I want to limit the size of the core file . Please help for same . Regards , Abhi