Find heap memory Size for Web Intelligence processing server in BO 4.0

Hi All ,
We need to gather data for sizing inputs.For Adaptive processing server , we can find same by going in CMC> Server > APS > Properties & check value for the parameter -Xmx  . Could you please tell how to  find the max heap memory allocated for a Web Intelligence processing server in BO 4.0 as for Webi server this parameter is not maintained. ?
Regards ,
Abhinav

Hi Abhinav,
The maximum threshold is a value which may reach on peak usage and Webi processing server cannot occupy memory beyond this value at any time.
In your situation 9 Webi Processing servers with 16 GB of RAM on server is not recommended. This is because consider situation with total 16 GB of host RAM.
4 GB should left for OS
Tomcat will need minimum 2 GB for 200 users
So you are left with 10 GB RAM for all BO services
Now 9 Webi Processing servers with 6 GB of Threshhost will not work here
For this configuration you can have 2 Webi Processing servers with default threshold should be running on single host.
Regards,
Hrishikesh

Similar Messages

  • Web Intelligence Processing Server Continuously in Stopping Stage....

    Good Morning Guru's,
       any one help me to come out from this situation in my Project "Web Intelligence Processing Server Continuously in Stopping Stage" in BOBJ server 4.0
    Thanks in advance.
    Regards
    Satya Pavan.

    Hi,
    Check in the logs if there is any error.
    or you can try with below steps.
    Clone your webi processing server
    Disable and stop the old webi processing server
    edit properties of the new webi processing server and click all available checkboxes that called "Restore System Defaults".
    Click save and close.
    start and enable the new webi processing server
    Amit

  • Web Intelligence Processing Server Stops

    We are having an issue with BOBJ XI 3.1 where the Web Intelligence Processing Servers just stop on their own and are stuck in the "starting" state.  We can't seem to find a pattern to when or why this is happening.  The only way to get the server back running is to Force Termination and then restart.
    Anyone else having these problems?  Anyone have any ideas on a possible fix?
    Thanks in advance.

    Denis,
    OK...so...
    Should it better standard practice for all BOXI installs to modify the reg key
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems\Windows
    From:
    %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows
    SharedSection=1024,3072,512 Windows=On SubSystemType=Windows
    ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3
    ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off
    MaxRequestThreads=16
    To:
    %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows
    SharedSection=1024,3072,1024 Windows=On SubSystemType=Windows
    ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3
    ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off
    MaxRequestThreads=16
    Also, is there any Desktop Heap advantage to running the SIA under a dedicated admin account vs. Local System?
    Thanks.
    KMS

  • How to change heap memory size for general java applications (not applets)

    Hi. I made a java class which manipulates images and I sometimes get an out of memory error when the files are large. In these cases I can run it successfully from the command line using:
    java -Xms32m -Xmx128m myappbut as I run this class from a firefox extension, I can't use this technique.
    Could some one tell me how to set this globally? I've found a lot of info on setting it for applets in the control panel but that's it. I also tried editing my deployment.properties file by adding:
    deployment.javapi.jre.1.6.0_11-b03.args=-Xmx128mbut none of these options seem to work.
    Thanks for any help.

    Also you can use use [JAVA_TOOL_OPTIONS|http://java.sun.com/j2se/1.5.0/docs/guide/jvmti/jvmti.html#tooloptions], with more documentation here. JAVA_TOOLS_OPTIONS is available since 1.5. There is no direct documentation on [_JAVA_OPTIONS|http://java.sun.com/j2se/1.5.0/docs/guide/2d/flags.html] but was made available since at least 1.3.
    The recent existing forum thread [Java Programming - How to change the default memory limits for java.|http://forums.sun.com/thread.jspa?threadID=5368323&messageID=10615245&start=36] has a long discussion on the issue.
    You specified you are not using applets, but if you do, I would also suggest you use the next Generation Plug-in (since 1.6.0_10) that allows you specify the max memory in the applet without having to instruct the user how to make the change. See [JAVA_ARGUMENTS|https://jdk6.dev.java.net/plugin2/#JAVA_ARGUMENTS] for applets. Java Webstart uses resources.

  • Documentation and Samples for Web Intelligence Extension Points url.

    I have been trying to find documentation and samples for Web Intelligence Extension Points. Can someone give me the link ?
    The files are
    1.)  webi_dhtml_EP_samples.zip
    2.) xi3-2_web_dhtml_customization_and_integration_ext_points_en.pdf

    Hello,
    I'm trying to find the API documentation and samples for Web Intelligence Extension Points for BO XI 3.1.
    The downloadable ZIP is no longer available at the URL Simply customize your WebIntelligence User Interface
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f21e8b-711d-2c10-6f9a-ae191653f848
    Anyone could you give me a new link for this feature ?
    Thank in advance.
    Sincerely,

  • Change the Default Page Size for WebI Rich Client 4.0

    Hi:
    I am trying to change the default paper size for Webi Rich Client 4.0. 
    In 3.x you made the changes to the defaultconfig.xml located in the path C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\classes\AppletConfig.
    In 4.0 I canu2019t seem to locate the file, can you advise if the file is the same name and where the file located.
    Thanks
    Brad

    Hi,
    Please check out the User Guide - see section Web Intelligence Cascading Style Sheets (CSS)
    http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_ia_en.pdf
    Regards
    H

  • Not able to find Interactive View Mode for WEBI in BI LaunchPad Preferences (BI 4.1 SP04).

    Hi
    I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!

    Hi,
    In BI 4.0, We don’t have the option of Interactive mode, the only modes for viewing WebI documents are as follows:
    1) Web:  it is similar to the Interactive mode in XI 3.1. It means that you will use the HTML interface in BI launch pad to create, edit and analyze documents.
    2) Rich Internet Application: This is similar to the Java Report Panel in XI 3.1.
    You are using the Java interface in BI launch pad to create, edit and analyze documents .
    But this requires the download of a Java applet.
    3) Desktop (Windows only): in this case you are using Web Intelligence Desktop to create and edit documents, a standalone interface that works outside the BI launch pad. But this requires an install on your local machine.
    4)  PDF: Same as in BO XI 3.1
    All view modes except PDF, have "Reading" and "Design" mode.
    When you view a WebI document, the default mode is "Reading".
    When you modify a WebI document, the default mode is "Design".
    The user should use the modify option or view > Design, if he wants to modify a report.

  • How do I find a file size for a project in its entirety ???, How do I find a file size for a project in its entirety ???

    How do I find a file size for a aperture project in its entirety ????

    You can't. The Aperture library is a combination of database and flat files, a project can be split among multiple files in combination with other projects. The size of any of those files (or a sum of the files) would have no meaning concerning the size of a project.
    BTW typing in a large bold font like you did is seen by many in then on-line community as a sign of shouting and is considered bad form. I'm sure you didn't mean to shout at us here as we are all just users here freely giving of our time to try and help folk like yourself so please in the future use the standard font.
    regards

  • "License Not Valid" Error on BOE XI 3.1 for Web-Intelligence

    Hey Everyone,
    This has been going on for sometime now. I downloaded the trial version ( BOE ) and installed the temSporary key in it. Now when I go to Infoview it doesn't show the option for Web-Intelligence document. So I went over to Rich Client and tried to log in. Now it gives me the error "License not Valid".
    The weird part is I can log into the Designer, DeskI , CMC , and it works perfectly, the only problems I'm getting are in WebI. I've tried doing a clean sweep and still it doesn't work. Any ideas on how to fix this?
    Thanks

    Can you run the following query in Query Builder and check whether SI_ENABLE_WEBI is true ?
    SELECT SI_SYSTEM_INFO FROM CI_SYSTEMOBJECTS WHERE SI_ID = 4
    Also, have you tried using a different temporary key?
    Best,
    Srinivas

  • How to capture memory usage for web application

    In OATS openscripts, how to capture memory usage for web application? Does it have the exisitng java method that we can call to get the memory data (e.g. peak bytes, private bytes) consumed by web application?

    JProbe

  • Where can I find the file sizes for each application before downloading?

    Where can I find the file sizes for each application before downloading? I have limited download (525 MBs/day) because of Hughsnet and I need to know each applications total size before I download.

    You can go to the trial page to get an estimated size.  As the Creative Cloud products change over time though this may become less accurate.
    If you are on a limited bandwidth account then you may want to consider purchasing a perpetual copy of Creative Suite 6 as opposed to subscribing to the Creative Cloud.

  • To find the Memory statistics for past 30 days

    Hi gurus,
    how to find the memory statistics for the past 30 days , i have tried with the options ST06 and ST02  but i cant able to have the data for 30 days.
    can any one help me out  in this reply with solutions rewarded!
    regards,
    S.Rajeshkumar

    Hi Rajesh,
    what do you call system statistics ?
    There are many many statistics in SAP that can be called "system".
    I already gave you the way to look at 3 of them.
    For your information, and it may not please you but it is rude to tell that the problem is urgent for you.
    Guess what : it is not at all urgent for ME as I know how to look at every statistics I would need.
    If your problem is really urgent, don't ask it on volontary answered forums but open a message with SAP support. As you pay for SAP support, you are in a position to tell SAP that your problem is urgent, not with me...
    I choose to answer to questions that
    I find interesting.
    I know something about.
    In that case, I'm very happy to help but I really really don't care about points.
    These points can't be eaten or sold and I already own enough t-shirts !  
    Good luck !
    Olivier

  • Isolating WebIntelligence ad hoc reports to specific Webi Report Processing Server

    Post Author: Lucia Chan
    CA Forum: WebIntelligence Reporting
    Has anyone successfully isolated WebIntelligence ad hoc reports to be processed by specific Webi Report Processing Server?  We need to enforce governance on the database side.  We can restrict scheduling for Webi reports to specific Webi Report Processing Server, but not for ad hoc reports.  Otherwise is there a way to do connection override for scheduled Webi reports?

    New version that's comming up SBO Bi4.0 will have bouilt in monitoring that will allow what you requesting.
    In the current product line - this is not possible, unless you just monitor WIReportServer.exe at OS level and alert when it's memory or CPU usage goest too high... (if memory reaches close to and above 1.7gb - you're going into troubles.)
    There are various fixes and improvements to Webi processing stability in recent fix and service packs, so if you're having webi instability - you should review latest FP fix issues list (in SMP to right of FP download there is an Info link - it leads to fixed issues docs).
    If you do not see your issue listed - open incident with support - let them investigate.
    Webi crashing when merging/unmerging dimentions sounds like a bug...

  • What's happaned with Web intelligence report Server

    Hello
    Im making a document about the BOE XI 3.1 server and when i saw the services in cmc web app i dont the services:
    Web intelligence report Server
    Web intelligence Job Server
    Dont this services exist anymore?
    Thanks
    Vegas

    I believe they are called adaptive processing/job servers now, from the CMC services there should be a sub category for webi, the new names are listed under there.
    Regards,
    Tim

  • Web Intelligence Report Server - Error: Failed to run rexec. Error number

    Hello,
    I post a message in this forum :
    "When i want to start "Web Intelligence Report Server" with CMC, i've got this error :
    Web Intelligence Report Server: Echec du démarrage/de l'arrêt du service sur l'ordinateur distant : Error: Failed to run rexec. Error number: %12.
    Any idea ?"
    I've do this command :
    bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
    bouser@v-bo-1 bobje$
    but i have always the same error "Error: Failed to run rexec. Error number: %12".
    Thanks

    Please try to avoid posting duplicate forum posts.
    This command :
    bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
    Restarts RAS server and has nothing to so with WebIntelligence.
    To be able to Start/Stop servers from CMC, you have to have rexec running on your Unix box.
    Google rexec for more information on what it does and ask your Unix admin to enable it.

Maybe you are looking for

  • How do I remove a phone number from iMessage on my Mac?

    I get a new iPhone tomorrow on a completely new number and I wanted to know how I can remove my current number from being used for iMessage on my mac so that when I get my new phone I can set it up

  • SECess for Import Purchase

    Dear Gurus, I am using Taxinn procedure. Also At the time of import purchase I am calculating SECess 1 % with the help of Condition JESH . I have assigned this condition at AP AT2 cond. in taxinn and also in prising procedure for import as in import

  • I upgraded to FF 3.6.10 and now FF will not run at all. (Safe Mode will.)

    I upgraded to FF 3.6.10. I have tried opening/starting FF from the Start Menu, from the Desktop FF Icon, and from the Program Folders Mozilla folder. When I try to run FF, it will not start. In the Task Manager, FF shows up in the list of Processes -

  • How do I reset my errors when trying to sync in the new version of iTunes?

    Hey everyone, I experienced an error a while ago when syncing my ipod to my laptop - it would say "100 items cannot be synced, refer to itunes for further info" - I figured out I could reset my warning messages by clicking on the phone symbol ... but

  • ESS implementation

    Hi, Can any one help me about the ESS implementation process? Like what are all the main areas in the ESS implementation? For example if a company wants to implement the following modules (below) mean what are all the things need to be done to achiev