"Find in Files" does not show a "Search Text" area (10.1.3.0.4)

I'm using JDeveloper 10.1.3.0.4
I use the find in files constantly so this is slowing me down. When I get the dialog for "Find in Files" it doesn't show a search text input area. It seem like there is a way to search by selecting text in the current file, but that isn't as useful to me. Am I missing something really obvious?
Thanks,
Dan

Hi,
when you select the search in file option from the menu then this shows you a text field to type in the search string. Below are option to select where to search and which fiiles to search. This works fine on all releasesI've installed
Frank

Similar Messages

Par file does not show up in iView

Hi,
I created a small project and exported as PAR file via system admin -> support -> admin console -> portal runtime -> upload .
The file is loaded into the server but when I go to create a iView based on this PAR file my PAR file does not show up as an available option. Am i doing something wrong or missing a step?
thanks
Salim

https://www.sdn.sap.com/irj/sdn/collaboration
Please find the new link.
Thanks
Subramanya

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

"ADF Navigation List" does not shows all items that are in table

Hi
Thank you for reading my post
I am tring to use "ADF Navigation List" , (it can be draged from data control platte into a form)
but when i drag and drop it on my form it does not shows all items that are available in my table ?
it just shows 10 item when i have 60 record in my Table.
Thanks

Hi,
in the pageDef ile, select the iterator for this list and set the fetch size to -1 (its 10 by default)
Frank

Song plays in iTunes, but file does not show in Finder

Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physical location where iTunes shows it to be.
An example is below... these are two song file locations from the 'Master Tune Library.xml' exported from iTunes. Both of these files
show in iTunes, and they both play just fine from iTunes (no exclamation mark next to the song names). Yet only the first file (one ending in 1219.mp3)
is at that location. The one ending in 1249.mp3 does not show in that location, either via Finder, or via Terminal.
From Terminal I get no results from "find /Volumes/LaCie500 -name espace_20101103_1249.mp3" (without the dbl quotes) But if I run the same command for the 1219 file, it does find it in the expected location. Really stumped as from where iTunes is playing ...1249.mp3.
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1219.mp3
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1249.mp3
Mac Mini
Mac OS X 10.5.8
iTunes 10.5
iTunes Media folder location is /Volumes/LaCie500/myTunes Both options underneath for "organize" and "copy files ... when adding to Library" are checked.
Thanks!

Try using EasyFind utility to reveal the files.
Are you absolutely positive those files exist? You have verified with iTune's summary view thatthe files is what you think it is?
Show In Finder will usually not only open the directory but also leave the actual file highlighted.

Concatenated PDF file does not show all content.

When I concatenate 2 single page pdf file into one pdf file, the concatenated page does not show all the content. It misses the last line on the 2nd page.
However the thumbnails view shows the missing line correctly.
Also, if I view the concatenated pdf into another pdf view, it shows the content correctly.

Upon further research in the merged pdf file, it appears the merged pdf file has 2 references to the same field "UFE_ISSUE_DATE".
If I edit the pdf file in the text editor and change one of the field name to "UFE_ISSUE_DATE_TEST", then the pdf gets rendered correctly with date value shown correctly!
So, we decided to use 2 different field names in each of the individual pdf for this field only.
But, what causes confusion is that we do have several other fields with same field name in each of the individual pdf file, but upon merge they appear correctly. Searching for such field name in the merged pdf file via text editor, I can see only 1 reference. Not sure, why this particular field "UFE_ISSUE_DATE" has 2 references in the merged pdf file.
Any one has any thoughts?

Outlook 2007 instead search does not show the items which are actually present in the inbox and folders

Scenario:
when user search for any particular email item by using the sender name or subject name it does not show any result. At the same time it works fine when he specify the search folder(target folder) instead of searching it across all the folders/sub-folders.
1. We tried reconfiguring the outlook profile but this not fixed the issue.
2. It is specific to only few users but so far for all the others users it works fine.
3. Restarted the “Microsoft Exchange Indexer Service” but this is also not fixed the issue.
4. Hence the outlook reconfigure not worked, rebuild the search index not tried yet, but will give a try.

Hi,
Did the user select All Mail Items scope when searching in Outlook?
In addition, please make sure the user is not searching in a shared mailbox because in some configurations, you are limited to using the
Current Folder search scope when searching in a shared mailbox.
Please also let me know the result if you have tried rebuilding index.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

An swf file does not show up in the website even though you can see it in preview and publish

I created a swf file from a mov file in Adobe Encoder. Thge movie shows up in Muse in both the preview and publish mode.
Does not show up in the webstie. The html file is in the assets foder and the swf file is in the image folder and the space is blank.
When i encoded the .mov file I saved it as FLV. Web 1920 x 1080, 16 x 9 5.4 Mbps is the setting for Flash Web Video when i encoded the file.

To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
* Tools > Options > Privacy > History: [X] "Remember download history"

Deployed par file does not show as an iview create option

Hello Experts,
I modified the com.sap.portal.runtime.masthead par app and deployed it to the portal as myCustomMasthead.
I see the par file in under the Support Workset in the portal, but when I'm in content admin and try to create an iview from the deployed par file template, the option for the deployed par does not show? Do I need to request basis to bounce the J2ee engine? What might be wrong?
Any advice will be appreciated.
Regards,
MM

Hi Nishant,
Yes the file exists under ROOT/WEB-INF/portal/portalapps.
And I am not using iview from template option, I am using iview from par file option.
I did not deploy the par file from NWDS, I created the par file in NWDS and then manually deployed the par file using the par uploader tool in the portal.
Do I need to do anything in the portalapp.xml file? This is what my portalapp.xml file looks like:
<application>
<application-config>
    <property name="ClassLoadingPolicy" value="5.0"/>
    <property name="DeploymentPolicy" value="5.0"/>
    <property name="AuthenticationPolicy" value="5.0"/>
</application-config>
<components/>
<services/>
</application>
Then there is also another portalapp.xml in the dist folder that has all this SAP stuff inside it. The top line says not to modify the file.
I bounced the J2EE Engine but it didnt fix the issue.
MM

XML configuration file does not show entry for PI_BASIS for PREPARE

Hello SAP Gurus,
We are doing ECC 6.0 SR3 upgrade including EHP3 SP3
We generated XML configuration file for EHP3 from MOPZ
But during XML file does not contains any information for PI_BASIS target level or source level
current level is 2006_1_620
We tried that XML file in PREPARE during EHP_INCURSION phase
but failed all time.
Let me know what we have to generate XML file with proper information including PI_BASIS
Even PI_BASIS not appearing in MOPZ list for selection, its surprising for us.
Any idea/direction would be highly appreciated.
Thanks,
Amit Lal

Hi,
I forwarded my query to AGS Dev support, They verified Solution manager and found no problem since it was up to date SPS15 ST400
Problem was in SAPup, they provide the lastest sapup tool that was again released for this specific problem. See notes for SAPup with keyword EHP
thanks,
Amit

Newest Adobe Reader not working with 8.1 IOS...Adobe icon does not show when pdf docs are saved...also printing pdf documents take forever. I uninstallled and reinstalled...issues continue

Latest AdobeReader not working properly with 8.1 IOS...Adobe icon does not show on saved PDF's and printing from PDFs takes forever. I uninstalled and reinstalled latest Reader

zoer1,
Adobe icon does not show on saved PDF's
Would you provide more details about the problem? A screenshot would be helpful.
The following FAQ document describes the steps to add a screenshot to your forum message.
How to add a screenshot to a forum message from iPad/iPhone
Regarding printing PDF documents...It depends on the PDF document that you are trying to print. In general, it will take longer to print more complex and larger PDF documents.
If you are willing to share your PDF document (that takes forever to print) with us at [email protected], we can test it with the same version (11.6.3) of Adobe Reader on different iOS versions (iOS 7.x vs. iOS 8.x). Please include the link to this forum (https://forums.adobe.com/thread/1616231) in your email message for reference.
Actual printing is handled by iOS (not by Adobe Reader) via AirPrint over Wi-Fi connection. We've heard from other users about iOS 8 Wi-Fi connectivity problems.
You may also want to search for similar issues on Apple Support Communities.

Filtering - DENY (bong-file) does not show/work

I have a very simple filter setup with only 2 entries, so 99.99% of the Internet gets blocked.
The custom Deny HTML page I have setup does not display on the clients computer when going to a page not in the allow list.
What am I doing wrong?
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
# Use only forward slashes in pathnames--backslashes can cause
# problems. See the documentation for more information.
Init fn="flex-init" access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->vars.p2c-cl% %Req->vars.remote-status% %Req->vars.r2p-cl% %Req->headers.content-length% %Req->vars.p2r-cl% %Req->vars.c2p-hl% %Req->vars.p2c-hl% %Req->vars.p2r-hl% %Req->vars.r2p-hl% %Req->vars.xfer-time%"
Init fn="init-proxy" timeout="300" timeout-2="15"
Init Test="C:/Sun/ProxyServer40/proxy-server1/config/Test.url" fn="init-url-filter" Test2="C:/Sun/ProxyServer40/proxy-server1/config/Test2.url"
<Object name="default">
AuthTrans fn="match-browser" browser=".*MSIE.*" ssl-unclean-shutdown="true"
PathCheck fn="url-check"
PathCheck fn="url-filter" allow="Test" bong-file="C:\\DENY.html"
ObjectType fn="block-ip"
Service fn="deny-service"
AddLog fn="flex-log" name="access"
</Object>
<Object name="file">
PathCheck fn="nt-uri-clean"
PathCheck fn="find-index" index-names="index.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service fn="send-file"
</Object>
<Object ppath="ftp://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve"
</Object>
<Object ppath="http://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve" method="*"
</Object>
<Object ppath="https://.*">
Service fn="proxy-retrieve"
</Object>
<Object ppath="gopher://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve"
</Object>
<Object ppath="connect://.*:443">
Service fn="connect" method="CONNECT"
</Object>
<Object ppath="connect://.*:563">
Service fn="connect" method="CONNECT"
</Object>The one odd thing. If the page i am viewing is using frames in the HTML code and there is a link to a page not in the allow list, the main frame that the link would display in does correctly show the deny html page. However, as said before, a simple request to say http:.//www.sun.com for example shows the browser's built in forbidden page.
Thanks

What ever default page the browser has for forbidden pages.
Like these:
[http://www.msexchange.org/img/upl/image0641086263614188.jpg|http://www.msexchange.org/img/upl/image0641086263614188.jpg]
[http://www.wictorwilen.se/WindowsLiveWriter/HTTP403ForbiddeninaSharePointsitewhenadd_D274/image.png|http://www.wictorwilen.se/WindowsLiveWriter/HTTP403ForbiddeninaSharePointsitewhenadd_D274/image.png]
[http://blog.stealthpuppy.com/images/cs/1000.14.124.403Forbidden.png|http://blog.stealthpuppy.com/images/cs/1000.14.124.403Forbidden.png]

Nautilus does not show Tracker search results

Hi,
I recently installed tracker and had it index my files. After indexing had finished, I tried tracker-search and tracker-needle, both of which returned the files I was looking for. But in Nautilus, searching via CTRL+F still only returns files whose filenames are matching my query. Nautilus does not seem to integrate Tracker search results properly, as it should according to this forum thread. Tagging files via the tracker-tags plugin in Nautilus works just fine. Re-installing nautilus did not change anything.
Any ideas what could be the problem here?
Thanks,
mfs

Hmm, I think it is supposed to use tracker if installed. At least nautilus has a build option called enable-tracker which is set to auto by default (I also compiled it with enable-tracker=yes but nothing changed). Also, "wonder" said in the thread quoted above that nautilus would use tracker and find only as fallback.
Last edited by mfs (2012-03-06 22:27:09)

Finder menu bar does not show up always

From time to time (maybe once a month) when I boot up my MBP, Finder Menu bar at the top of the screen does not automaticaly show up. Only basic screen color.In order to bring that bar (with apple icon in the left top corner and little magnifying glass,airport symbol etc in the right top corner) I have to click once at the top of the screen where that bar is suposed to be.Than it shows up and everything runs smoothly afterwords. At the same time my Dock works fine from the beginning. It does not bother me too much because everything else works perfectly fine and it happens not so often. I only wonder if anybody had a similar problem or if that is a problem at all. Thanks!

My own and my girlfriens's new 13" MBPs (10.6.2) have done this a couple of times. I really haven't bother to look into the case because I assumed that it's just a bug as it was happening on both machines. As a matter of fact, I haven't seen it happening for a while.

PDF file is not opening in ipad mini,pdf file does not show any containts in file ,tried all options , please suggest solution

Hi Friends
i am not able to read some of the important pdf from ipad mini,pdf is opening but not showing any containts,i tried all suggestion priviously given in discussion forum (reinstallation,formatting,system upgrade,mailing pdf document )
can any one kindly suggest solution for above problem ?

Try and install free Adobe Reader to save and read your PDF files.
https://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8

"Find in Files" does not show a "Search Text" area (10.1.3.0.4)

Similar Messages

Maybe you are looking for