Find IP address from which Document Changes are done

How to find out from which IP Address the user has made changes to the SD Document.

Sat is correct, the change log does not go down to that level.  The lowest level would be user, date, time.   I suppose if it was necessary, you could use a user exit to get the current IP and update a custom table  with the data.  I'm not really sure of the point though.
Regards,
Rich Heilman

Similar Messages

  • How do I change the address from which voice memos are being mailed?

    My wife's iphone is sending voice messages with my return address. I can't find the setting to change that. Ideas?
    Thanks,
    Bob

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • How can I chose and manage the addresses from which my emails are sent?

    My ISP lets me have an infinite choice of addresses by putting whatever I like in front of the @ in my email address.
    I want to use this to create and manage separate accounts for myself, my wife, and two voluntary associations for whom I act as secretary.
    How do I I set this up?
    Thanks in advance.

    Look for Manage Identities in Thunderbird's Account Settings.

  • In Mail, how do I make it so that email replies to me are sent to the email address from which I sent my original message?

    I have two IMAP accounts set up in Mail, one work and one personal. The personal account also receives emails from a third account (but I have that set up through gmail's forwarding, not Mail). I am sending emails from my work account and replies are coming to this third account, which I don't want to happen.
    How do I make it so that replies to me are sent to the email address from which I sent my original message?
    Thanks for your help!

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Could Apple provide info about IP addresses from which my iPhone was tracked?

    Hello, i've been attacked by two people in the street from the back and my bag with documents and money has been stolen. and now i'm guessing who was it. So i have a question about Find My iPhone app: could Apple provide info about IP addresses from which my iPhone was tracked?

    Welcome to the Apple Community.
    could Apple provide info about IP addresses from which my iPhone was tracked?
    Unfortunately not.

  • How can I extract a page from a document if I don't have that option on my tools menu?

    How can I extract a page from a document if I don't have that option on my tools menu?

    iPhoto on the iPad can be used to make photo books, but not calendars. It is a very different program from the Mac version of iPhoto. I hope you have access to a mac to create your christmas calendar.
    http://help.apple.com/iphoto/ipad/2.0/?handbuch#blnkbc26e276
    Search the AppStore for "Foto Calendar". I have not tried any of these apps, but there are quite a few, that claim to be able to create an "Awesome foto calendar"

  • What exact changes are done in MGCP after NAT

    Hi All,
    I am not able to understand the changes in the MGCP packet after NAT. The screenshot is of working and non working case. Office is working fine with port change after NAT. But at home the NAT does not change the src port. It RSIP packet from the phone to the MG.
    What exact changes are done to a MGCP packet after NAT.
    Any help will highly be appreciated.
    Regards,
    Ravi

    NAT should not be used with VoIP.
    However, you may have better luck with H.323, or SIP, under NAT.

  • How to Find out the from which table we can get the following fields?

    The following fields are from invoice data
    How to  know or from which table we get the following fields:
    Header Details:
    Manifest:, Finance Control #:, Alternate SID:, Carrier:, Container/Trailer #:, Hazmat Code:, Harmonizing Code, Freight Forwarder, Fiscal Rep., Ship From,  Notify Party
    Item Details:
    VAT/Tax Rate %, VAT/Tax Amount, Measurements, Net Weight, Gross Weight
    thanks

    Dear Krishnama
    Place your mouse on the required fields and press F1.  A box with header Performance Assistant will appear in front of you where you select "Technical information" (icon like hammer and spanner). 
    You can now see what table it is.
    thanks
    G. Lakshmipathi

  • Finding IP address from Client ID?

    From an Android tablet:  How do I find the IP address of a computer in my network if the know the client ID? It's easy from a desktop:  I just bring up Hamachi and everything is revealed.  If I use the tablet browser to view my Hamachi networks (at the Hamachi site), the page is compressed horizontally and part of the IP address is hidden. Apologies if I have missed this in the documentation or knowledge base.

    try
              request.getRemoteAddr() to get IP of Client
              request.getRemoteHost() to get HostName of Client
              "Matt Raible" <[email protected]> wrote in message
              news:3a9c1efc$[email protected]..
              > Does anyone know how to obtain the IP address from the client? I need to
              > get it in a servlet to set it as a session variable.
              >
              > Thanks,
              >
              > Matt
              >
              > P.S. Please send reply to [email protected]
              >
              >
              

  • How to find T-codes from which roles

    Hi
    Can any body tell me how can I find from which all role a user getting access to a Transaction code.
    For example : I want to remove a access of a particular Transaction for User XYZ. For this I want to find out from which all roles assigned to him , he is getting access to that Transaction
    Thanks in advance

    Hi there,
    this is how I would do it.  Forget the lookups etc, though maybe this would be useful for later analysis.  Instead, run a report with complex selection criteria
    SUIM->Roles-> Roles by complex selection criteria
    (transaction S_BCE_68001425)
    Enter in role name
    Enter in User ID (in selection according to user assignments)
    Enter in transaction code, if the transaction is in the role menus
    OR
    Enter in S_TCODE under selection according to authorization values, then click 'entry values' then enter the transaction under transaction code.
    Execute and voila.
    Hope this gives you want you need.
    Cheers,
    Di

  • My old iphone was stolen. Can I wipe it remotely if I know the IP address from which someone is trying access my accounts?

    I was in Europe last week and was pick pocketed and my iphone 3GS.  Now someone is trying to access my gmail account from Romania.  I was notified by google and given an IP address from where the attempt is coming from.  I have since upgraded my phone, and was only using it as an ipod.  For that reason, I didn't have any security settings (no password).  But, there's quite a bit of personal things on there (text, tons of pictures, etc)  Is there any possible way it could be wiped remotely since I know the IP address where it is located?  I also remember setting up a locate my iphone thing some years back, but have never needed to use it (so it seems some of the information needed may not be up to date).  Seems like I'm SOL if I don't have icloud or whatever.

    Here is a link that explain you the steps http://support.apple.com/kb/ph2701

  • To trigger  congen_obj_wrt   when any changes  are done in Capgen_obj_wrt

    Hi ,
      I would like to know if there is any mechanism to trigger an congen_obj_wrt when changes are made to the organization(capgen) even for change in fields like name1 or address .
    There is "is contact person of " relationship maintained for the cp(congen ) and the organization (cap ) .
    I would like to trigger a congen_obj_wrt as soon as any changes are made to capgen_obj_wrt if the relationship exists .

    Hi,
    try the user exit EXIT_SAPLV56U_004.
    use the following tables parameters of this function module to determine whether the values are changed:
    I_XVTTK - Shipment Headers (Current)
    I_YVTTK - Shipment Headers (Old)
    I_XVTTS - Shipment Stages (Current)
    I_YVTTS - Shipment Stages (Old)
    if any change is made to any of the fields, you can trigger the standard output type by using the function module WFMC_MESSAGE_SINGLE. you will have to pass a structure of type NAST with the required vlaues.
    try this...
    cheers
    jubin

  • Is it possible to obtain the last IP address from which the device has displayed a message from Find My iPhone ?

    Hello, a couple of months ago my macbook got stolen so when yesterday i recieved an email my message was displayed on it i was wondering if there is a possibility to get the last IP address used on that machine .So if there is such possibility could someone direct me how to do it ?

    I'm sorry, but I'm still not clear on the problem. Do you mean that you have both "Smith Family" and "John Smith" tied to the same email address? If so, again, that "friendly" name isn't sent to the recipient, so the person receiving the email will get exactly the same thing regardless of whether you select the "Smith Family" entry or the "John Smith" entry. The "friendly" name doesn't go along as part of the email.
    It would only matter on your end when looking at your Sent email, and if that's an issue, it should be no problem to select which one you want; just start entering in the email address/name and wait a second; you'll get a dropdown with all the addresses that meet that criteria and you can just pick the correct one.
    Forgive me if I'm still not understanding what the difficult is or what you're trying to accomplish.

  • Enhancement - Accounting Document from Billing Document - change line items

    Hi Experts,
           Our client has a requirement to display all line items(as shown in Billing document) along with the tax line in the Accounting document. I can explain it as below:
          In VF01 transaction code: enter the delivery number.
          Press enter to see the number of line items that will be populated in the Billing document.
          Click on save.
          Here in the Accounting Doc you'll find only 2 line items, one line item is the consolidation of WRBTR and quatity of all the line items in the Billing Document and the other line item is the tax.
          We are required to replace the consolidated line item in the Account Doc with all the actual lines as populated in the Billing Document.
          For this we tried various methods:
                 Searched for a BAPI - couldnt find any which will help in modifying the line items before creation of Account Doc
                 Checked UserExits - Found one SDVFX008 but it didnt have the table which is sent for population of Accounting doc hence there was no way we could modify any table to get the desired output.
                 Searched the VF01 Flow in Debugger to check when the Accounting Doc is updated, but it also didnt yield any fruits.
          Kindly please guide on a way this can be accomplished. Appreciate the help from you all...

    Hi
    I think that your requirement is related with summarization of items in the FI doc for the billing document. Please, see SAP Note 36353 - AC interface: Summarizing FI documents. See also Note 301077 - User exits for the interface to accounting.
    I hope this helps you
    Regards
    Eduardo

  • Remotely Shutdown Mac/ Find IP Address from Back to My Mac

    So I use Screen Sharing frequently with the Back to My Mac service with Mobile Me. Tonight I was screen sharing to my Mac Pro in my dorm room from my Macbook Pro at home, and changed the display resolution of the remote machine (MacPro), which now just shows up as a black screen, but I can still navigate through it's files using the Finder. I can't find a way to change the screen resolution back on it, so I figured I would just shut it down remotely until I can sit down in front of it. However, I don't know the IP address (since I just login via back to my mac). Is there some way I can get the IP address of my remote machine? That way I can remotely login through SSH and just shut it down via the terminal.

    Can you go thru the Finder and pull up Safari or some browser for http://whatismyipaddress.com/ which will give your ip address(it gives my static address) and then in Terminal this command will show local addresses & foreign addresses,
    doug-penningtons-power-mac-g4:~ dougp$ netstat
    Active Internet connections
    Proto Recv-Q Send-Q Local Address Foreign Address (state)
    tcp4 0 0 192.168.0.5.51493 192.168.0.4.vnc-server ESTABLISHED
    I am doing this all thru screen sharing to give you an idea.
    Local above is Leopard and foreign is Tiger(remote/foreign)

Maybe you are looking for

  • How to remove the window border in SAP Script

    Hi, In my requirement when I create any window in SAP Script, in the output the border around the window should not be displayed. Request to suggest how to proceed on this. Thanks, Naresh

  • EBS BAI2 and ZBA Accounts

    Hi All, How to handle clearing for ZBA posting in EBS. We have one concentration account and it funds to 4 ZBA accounts. On the outgoing ZBA it will post Debit to clearing account - posting type 1 On the incoming ZBA it should clear the Debit in the

  • How to share with users?

    Hello! I am an administrator user. I created a managed user for my little sister and I don't know how to share with her my iTunes library. How can I do that? Thanks in advance, Camille

  • Unable to update OS 7.0 to 7.1 using desktop manager

    Hi... I have bb 9380 curve which has 7.0 OS, i want to update it to 7.1.  I have downloaded 7.1 device software and installed it in PC but when i try to update this through Desktop Manager it shows me " There is no update available for your divice" .

  • Using static import

    I just downloaded the 2.2ea. I tried using the static import feature. When I try to import my own classes f.ex. import static test1.test2.TestInferface; i get the error cannot find symbol symbol : class test2 location: package test1 import static tes