Find lost pictures while exporting
I somehow deleted my edited photos while exporting. My library is showing zero pics. Please help.
First try restarting Lightroom and/or your computer, if still no go:
Try renaming your preferences file, if still no go:
Try a backup catalog.
I think either Lightroom itself is wrapped around it's axle, or your catalog is on the blink.
You can always try re-installing Lightroom, although my experience is that the problem is more often a data file than a program file.
Good luck,
Rob
Similar Messages
-
clicked on photo icon to discover 3000+ lost pictures, iPod was not backed up, any suggestions?
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
you said no backup
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
Otherwise they are lost. -
I lost pictures while transfering from iphone to mac, how to get then back?
I lost 952 pictures after transferring then from my Iphone4 to Iphoto on my mac... While iphoto was finishing the transfer, it asked me if i would like to delet photos from iphone and I answred Yes... but some problem happens to Iphoto, and I have had to do the "force quit" with it... after all... when I opened Iphoto to see the pictures... it was not there... neither in my Iphone... Where I can find it back??
You get one download only.
It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Use your backup to put everything back.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow it.
http://www.apple.com/support/itunes -
Find lost pictures from my disk app
I pluged my iphone to a different computer and by mistake syncronised it. In the process I lost many apps but worst is all the privet document I had stored in the "My Disk" app. Does any one knows how I can get those document back?
ThanksNo, unless you have a backup.
iPhone sync only with one computer. Syncing with another will delete iPhone content and replace with the new iTunes library. -
I lost my last import when iPhoto quit. Is there a way to find these pictures?
I lost my last import when iPhoto quit. Is there a way to find these pictures?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Lost pictures---cannot find volume
I recently installed Leopard on my IMAC. Did the archive and erase method. More recently I installed an update from Photoshop CS2 to CS4. Now my wife gets "cannot find volume PICTURES" error message and has lost all her pictures. I lost all pictures except those that had been opened or worked up in PS.
Under Finder, left side, the Picture volume seems to be not connected, but if I go to the hard drive Icon, I can find a pictures folder containing some recent additions to the folder. So it seems to be there, but it is not in the finder below Documents.
On my login Pictures works, but most of my photos are gone. Help!
Anybody got hints on how to find the pictures, and re-connect the pictures volume?Did the archive and erase method.
NO you didn’t. You did either an +Erase and Install+ or an +Archive and Install+. There is no “archive and erase method”.
Now my wife gets "cannot find volume PICTURES"
The Mac is looking for a Volume called Pictures - not a folder, a Volume. A Volume is a disk, a partition of a disk or whatever.
but if I go to the hard drive Icon, I can find a pictures folder containing some recent additions to the folder.
This is the Pictures folder on your on your Start Up Volume.
Regards
TD -
I was importing photos to iphoto and somehow lost access to my iTunes library. when i open iPhoto, it asks me to select a library, but there are no photo libraries present for me to select. I cant find my pictures and have no access to my iPhoto.
somehow lost access to my iTunes library.
What does iTunes have to do with this? Also more specific information might be helpful.
What system and iPhoto versions are you running?
Where are you being asked to select a library? What kind of library, iPhoto or iTunes?
What do you see when you first launch iPhoto?
OT -
How / where can I find my pictures/videos that's been lost from my iPad?
I am just wondering how and where on my iPad can I find my lost pictures and videos4 months ago?
Did you ever back anything up with iTunes? If not, at this point, those pictures and video are long gone. Sorry.
-
I can't find my pictures on iCloud. Have I lost everything?
I had the settings on my iphone to automatically backup to iCloud my camera roll, accounts, documents, etc. My iPhone's touchscreen went out and was unable to be fixed. I cant find my pictures on iCloud. Have I lost everything?
Pictures are not saved to iCloud, they can be synced to PhotoStream.
PhotoStream is accessible from other iDevices and the AppleTV.
If the device had been used as desigend, pictures taken with the device would have been regularly copied off the device to a computer. -
I have lost my pictures as I had to do a backup for data on my iphone and could not find my pictures. Please help me to find pictures also on WhatsApp.
That has not changed:
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
If necessary
iOS: Unable to import photos to computer - Apple Support
If they were synced to the iPod then yo need a third-party program like TouchCopy or PhoneView -
Issue while exporting report in Excel Format
Hello,
I am facing problem while exporting the report in Excel Format. After analysis, I think that it could be due to two reasons, either we are using wrong versions of Jars, or we are using wrong API. Here is the code, approaches and problems we are facing. Please help.
First approach we are using is:
// using basic API
import com.crystaldecisions.reports.sdk.ReportClientDocument;
// get client document from crystal report API and open the report by specifying the report name, with path
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open( reportPath, 0 );
// give chance to extending classes to configure the report document by POJO or by sql parameter etc, just adding the parameters infromation using ParameterFieldController
configureReportDocument( reportClientDoc, reportMetadata, reportData, reportContext );
// get data source of crystal report
Object reportSource = reportClientDoc.getReportSource();
// export the data - we have also tried with MSExcel format
ReportExportFormat exportFormat = ReportExportFormat.recordToMSExcel;
LOGGER.debug( "exportFormat[" + exportFormat + "]" );
ByteArrayInputStream byteArray = (ByteArrayInputStream) reportClientDoc.getPrintOutputController().export(
exportFormat );
Problem Faced: Specified Excel format is not supported.
Second Approach: We come to know that excel format is supported with new releases and with occa package.
Then we tried with import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument; It ask to set the ReportServer. When we are trying to set the server as
reportClientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
Application is unable to find 'ReportClientDocument.inprocConnectionString' property. It seems like we are using some old jars. However we have downloaded the latest released jars for eclipse 2.
Please help for it. Issue is to export the report in excel format, which is currently working fine for PDF. If this problem is related to Jars, please suggest the path to download the latest jars. We also looking for the latest jars like rasapp and rascore etc. But these are not available with Crystal Report for Eclipse 2 release.
Waiting for urgent help. Thanks you..
Regards,
MohitHi,
Send me Environment Details .
Here is the code snippet for exporting report to excel format:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import="com.crystaldecisions.sdk.framework.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.managedreports.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.io.*" %>
<%
String username ="Administrator";
String password ="";
String cmsname ="localhost:6400";
String Authen ="secEnterprise";
//connecting to Enterprise
IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon(username,password,cmsname,Authen);
//get the report App Factory form the Crystal Enterprise
IReportAppFactory appFactory = (IReportAppFactory) es.getService("","RASReportService");
//get the infostore service form the Crystal Enterprise
IInfoStore istore = (IInfoStore) es.getService("","InfoStore");
//get the report by name from crystal Enterprise
IInfoObjects iobjects = istore.query("Select * From CI_INFOOBJECTS Where SI_NAME = 'sampleramz2.rpt' and SI_INSTANCE = 0 ");
//open the report in the report doc object.
ReportClientDocument Doc = appFactory.openDocument((IInfoObject)iobjects.get(0), 0, Locale.ENGLISH);
// WORKING WITH THE PRINT OUTPUT CONTROLLER
//Use the report documents PrintOutputController to export the report to a ByteArrayInputStream
ByteArrayInputStream byteIS = (ByteArrayInputStream)Doc.getPrintOutputController().export(ReportExportFormat.recordToMSExcel);
// EXPORTING THE REPORT
//Create a byte[] (same size as the exported ByteArrayInputStream)
byte[] buf = new byte[2000 * 1024];
int nRead = 0;
//Set response headers to indicate pdf MIME type and inline file
response.reset();
response.setHeader("Content-disposition", "inline;filename=ramz");
response.setContentType("application/xls");
//Send the Byte Array to the Client
while ((nRead = byteIS.read(buf)) != -1)
response.getOutputStream().write(buf, 0, nRead);
//Flush the output stream
response.getOutputStream().flush();
//Close the output stream
response.getOutputStream().close();
%>
Let me know any information is needed,
Regards,
Rameez -
Error while exporting a table - EXP-00091
I am doing an export of a table. The table has 1000838 rows. After the export is completed,
when I checked the log - it said
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.4.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table FIDA_LABEL 1000838 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
I looked in the Oracle error messages document and found this out ---
EXP-00091 Exporting questionable statistics
Cause: Export was able to export statistics, but the statistics may not be useable. The statistics are questionable because one or more of the following happened during export: a row error occurred, client character set or NCHARSET does not match with the server, a query clause was specified on export, only certain partitions or subpartitions were exported, or a fatal error occurred while processing a table.
Action: To export non-questionable statistics, change the client character set or NCHARSET to match the server, export with no query clause, or export complete tables. If desired, import parameters can be supplied so that only non-questionable statistics will be imported, and all questionable statistics will be recalculated.
And this how my export command looks like -
exp vincent/passphr query=\"where state in \(\'MD\',\'CA\',\'WI\'\)\" file=$EXPDIR/fida_label_9i.dmp tables=vincent.fida_label
log=$LOGDIR/fida_label_exp.log
Ofcourse, I am using the query clause because I really need to and it has always worked when we were in the Oracle 8i environment. We recently moved to the 9i. And this happens in this 9i version...
And I certainly do not want to specify the import parameters to ignore the questionable statistics as no changes are desired in that area...(my hands are tied..).
What could " a fatal error occurred while processing a table " mean? And how can this be traced and troubleshooted ? Or how can I find out if any row errors occurred ? And if required, how do I check the character sets and other likes ?? (I have no idea in this area)
Thanks. All I needed was to get around this error. Your suggesions/responses would be highly appreciatedWhat version of Oracle 9i are you using? Do you have a standard 'NLS_LANG' environment variable set on client's machines? Or do you set it to different values on different machines?
Here is one of way you could get around it.
Could you specify the export parameter 'STATISTICS=NONE' while exporting the table data?
Try this and see.
If this is successful, you could use the import utility as usual. You could always compute or estimate statistics on the table after import. -
Crystal Report: Error while Export to Excel
We are using combination of Crystal Report 10 With
J2EE, Below source code is working fine While
exporting to PDF, MSWord, RTF format.
if(selectedFormat.equals("MSWORD"))
exportOptions.setExportFormatType(ReportExportFormat.MSWord);
if(iPageFrom>0 && iPageTo>0)
RTFWordExportFormatOptions RTFExpOpts=new
RTFWordExportFormatOptions();
RTFExpOpts.setStartPageNumber(iPageFrom);
RTFExpOpts.setEndPageNumber(iPageTo);
exportOptions.setFormatOptions(RTFExpOpts);
But am getting following error while exporting report
to Excel
com.crystaldecisions.report.web.viewer.ReportExportControl
Invalid post back event : {0}
We would like to know, Is SDK feasible for exporting
to excel or not ?
If yes! then Please suggest us for same.
Thanks In advance :)I will make sure that I am on the latest patch ie SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
You can find the rumtimes here:
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
ClickOnce
https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
Recompile the app and then deploy.
What is the .NET Framework used by the application?
Method of deployment?
OS where app is deployed, x86 or x64?
Are you able to export the report from designer ie CR2008 Standalone?
- Saurabh -
How do I find all pictures with no (empty) keyword ?
I have decided to import all my pictures into LightRoom.
A lot of my older pictures are not registered with any keywords :(
- only with IPTC location information.
My plan is to systematic go through all my pictures and add relevant keywords to all pictures - so my old pictures become as searchable as my newest pictures.
Some of my old pictures has keywords some has not.
How do I in Lightroom - find all pictures with no keywords?
I have tried to use the Find tool - but don't see any options to search for "Empty/missing" keywords.
Also I would like to find all pictures with few keywords and in step II add additional keywords to these pictures.
Any ideas on how to make a find all pictures where number of keywords is less than X inside or outside LightRoom.
Henrik Bach
Denmark> I also did think of the SQL idea.
> If I find a way of doing this I will repost my findings.
Well, being a tech geek, I found this challenge kind of irresistible,
and I'm happy to report I have a solution for you.
STEP 1
First, make a copy of your "Lightroom Database.lrdb" file (we'll work
off the copy to be safe)
STEP 2
Next, you need to be able to browse the database. The database is in
SQLite3 format. I tried installiing an SQLite3 ODBC driver and accessing
it through MS Access 2003. While Access was able to see all of the
tables in the database, every time I tried to link to one I got:
"Reserved error (-7748); there is no message for this error"
I found a few tips for this but wasn't able to work around it and get it
to work. Which is a shame, since Access would be the easiest way for
browsing and querying tables.
Instead I found an open source tool called SQLite Database Browser.
http://sourceforge.net/project/showfiles.php?group_id=87946&package_id=91778&release_id=41 4746
I used the Windows version. There appears to be a version for MacOSX on
PowerPC. It doesn't look like there is a version for Intel based Macs
(though if you know how, you could always try downloading the source and
compiling it yourself).
STEP 3
After you install the browser, open it up, choose "Open Database" and
select the COPY of the lightroom database we made in step 1
STEP 4
go to the Execute SQL tab and issue the following command
SELECT A.idx_filename, count(C.name)
FROM Adobe_imageFiles A, AGLibraryTagImage B, AGLibraryTag C
WHERE A.image=B.image AND B.tag=C.id_local AND C.kindName='AgKeywordTagKind'
GROUP BY A.idx_filename
HAVING count(C.name) <= 3
That will give you all images with 3 or fewer keywords applied.
Of course, theres no guarantee that this wont break in future versions.
Now an explanation of the data.
Adobe_imageFiles - contains data about image files:
1) idx_filename is the filename
2) absolutePath is the full file path
3) image is a unique ID for the image which you can cross reference in
other image related tables
AGLibraryTag - contains info about "tags" applied to images:
1) id_local is a unique ID for this "tag", which you can use to cross
reference in other tag tables
2) kindName is the kind of tag you are looking at. Available values
appear to be:
AgCaptionTagKind
AgCollectionTagKind
AgCopyrightTagKind
AgEnumeratedMetadataTagKind
AgFolderTagKind
AgImportTagKind
AgKeywordTagKind
AgMissingFileTagKind
AgQuickCollectionTagKind
AgSpecialContentOwningTagKind
AgTempImagesTagKind
3) name is the value for that tag (the collection name, the keyword, etc)
AGLibraryTagImage - Use this to connect the images and tags tables -
Error while exporting "PProHeadless.exe has stopped working"
hello friends,
I am facing trouble while exporting any video from Premiere Pro, right now I tried to export video with H.264 codec but after completing to 60% it stopped and showed an error mesg PProHeadless.exe as stopped working, I checked some threads but didn't find any solution. Following is the detailed error code
Problem signature:
Problem Event Name : PPCRASH
Application Name : PProHeadless.exe
Application Version : 0.0.0.0
Application Timestamp : 4ce34c66
Fault Module Name : dvamarshal.dll
Fault Module Version : 5.0.0.0
Fault Module Timestamp: 4ce33713
Exception Code : c0000005
Exception Offset : 0000000000023c88
OS Version : 6.1.7600.2.0.0.256.1
Locale ID :1033
Additional Information 1: 5c8e
Additional Information 2: 5c8ea6111923f086cbfdc87126296bd6
Additional Information 3: bc7e
Additional Information 4: bc7e96e4b390e9895c38ff75db64a199
I checked one thread suggesting the re-installation of Windows 7 and other suggesting re-installation of Adobe Premiere Pro so is this error occured due to windows or due to adobe PR?
please help me, your help is highly appreciated....
Happy New Year to everyoneHi Todd,
Thank you for the quick reply, yes I have installed the Premiere Pro CS5 Update 5.0.3, still I am facing the same problem
Maybe you are looking for
-
How can I enable the android one-fibger zoom gesture in Firefox?
2 OS versions ago, android changed the system wide zoom gesture to a single finger one. double tap -> hold -> move finger up or down This doesn't work in Android, which is still stuck on the old iOS style pinch zoom gesture. Is there an option to fix
-
while doing stock posting I am getting the bellow error T.code:MB1C (Period 004/2014 is not open for account type S and G/L 799999) Discussion locked. Reason: 1. Basic question. Please put some effort in search & trail, before you post your query as
-
I'm not sure I properly asked my question. I have a need to post a resume to an employer who requires that the information be submitted via Internet Explorer. My OSX vs 10.4.11 will not accept downloads of the current IE version and Microsoft no long
-
I noticed that there is a huge difference in image quality when my podcast is viewed from my .Mac site in Quicktime and when it is viewed in iTunes. iTunes looks really, really bad. Can anyone account for this? And is there any way to make the podcas
-
How can I get my music on iTunes on my new computer?
I just got a new computer because my old one totally died. All I want to do is get my iTunes on my new computer to have all my music on it, just like it was on my previous computer. I have an first generation iPod Touch, 16GB.