Find model # with fried motherboard and blank sticker

Hello, I have a tecra a9, but no idea the model#. The sticker on the bottom is blank due to age (Toshiba should look into their sticker quality). And the motherboard is fried so I cannot boot or do anything that would reveal in the bios, in windows, or use anything software-related to identify it. I have disassembled it completely as a side-project to replace the MB, but based on the components within the case can I identify the model? Let me know what components would reveal the model I have, such as the processor, ram, graphics solution, hard drive size, wireless components etc. I will then report back what those components are and perhaps we can track down my model. Thank you!

http://www.sparepartswarehouse.com/Toshiba,Tecra,A9,Laptop,Parts.aspx
Theres a whole list of model numbers on the second table, after selecting a model then the component part numbers are available. Hope this helps

Similar Messages

Using display from touch smart with fried motherboard.

I have a 520-1055 touchsmart that croaked because of motherboard problem.
does anyone know if there Is any way to hookup the display to use it as an additional display for another touchsmart or any other computer for that matter. I already removed the HD and the RAM so I am just trying to salvage what I can before recycling it.
I would appreciate any suggestions anyone has.
THKS.
This question was solved.
View Solution.

Hello @oldguy64,
I understand that you are looking to use your HP TouchSmart 520 All-In-One Desktop PC with a fried motherboard as a monitor for another computer. Unfortunately, you cannot do this. The HP TouchSmart 520 All-In-One Desktop PC is a computer with a monitor built-in which means the connections (except for the game-in HDMI port) all go through the computer to the monitor and not directly to the monitor. This means when you try to connect another computer you are connecting it to a fried motherboard and not the monitor.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How to use Adaptive WebService Model with CAF WebService and Complex Type

Hi All,
I am trying to use the Adaptive Web Service Model and call a WebService generated by the CAF. The return type of the WebService is a Complex Type.. I receive an exception when trying to instantiate the Model Node.
Does anybody know how to use the Adpative Web Service Model with CAF WebServices and Complex Types as return type?
Help is appreciated..
Thanks, Johannes

Thanks Mukesh.
It is not possible to apply the Service Controller Template on Enterprise Java Bean Models as described in the Document. When I try to aply the template on the EJB Model, NWDS says: Only Webservice Models and RFC Models are supported...???
I did not find any information about how to return complex types in AWS.. in this document???
Is there such information available? Has anybody ever done that? There must be a way to do that.. Is is the standard approach, isn't it...? Please help me out there.. I need to get this running..
Thanks, Johannes

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Yosemite finder crashes with previewig .txt and other files

Hello,
under Yosemite the Finder crashes with previewig .txt and other files.
Is this just my problem? Help please.
Thank you very much.
Regards.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Macbook Pro late 2012 model with intel processor and 4G of RAM. I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

I have a Macbook Pro late 2012 model with intel processor and 4G of RAM. I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. I have ordered a 1T external drive to do a backup now. What can I do to improve my system performance?   Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

I have a Macbook Pro late 2012 model with intel processor and 4G of RAM. I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. I have ordered a 1T external drive to do a backup now. What can I do to improve my system performance?   Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

Needed SAP CRM Data model with Object, Entity and Attribute level details

Hello all,
We are working on a huge IS-U / CRM implementation and we are still in the data gathering phase. The client has a whole load of legacy systems that will be replaced with IS-U and CRM. Right now we are in the process of developing data models using Excel first and then presenting them to the client to go forward from there. For this we need to have all the business objects, entities and their attributes.
I know about the SD11 transaction, but we don't have a CRM system yet. My colleagues have access to a German ERP system and they were able to get models for HR, FI and Asset management. I tried for the Business partner / customer in there, but the models were not proper.
So, once again, I need the specific data models out of SD 11 for CRM business partner. If anybody has the information, please do pass it on to me as I need them urgently. It would be a great help if somebody can do so.
Regards
Rajesh

I suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant

ATO model with both "Make" and "Buy" options

Hello,
Is it possible that an ATO Model has both "Make" and "Buy" type of options in it. If yes, how does the "Buy" item get fulfilled on the sales order. The buy item needs to ship together with the assembly, but as a separate part.
Or should such a scenario be achieved by having an ATO within a PTO and the buy item as a separate option in the PTO?
Thanks,
Raj

If an item is not made part of the assembly, then you have to choose a PTO.
Something like this
>
PTO
-------- PTO Option Class
---------------Buy1
---------------Buy2
--------ATO Model
--------------ATO option class
---------------------Option1
---------------------Option2
>
Sandeep Gandhi
Edit: For some reason, the BOM format is not rendered correctly in the above post. It appears that the ATO model is a child of PTO option class. That is not the case. The PTO Option Class and the ATO model are at the same level on the PTO bom.
Edited by: Sandeep Gandhi, Independent Consultant on May 1, 2012 9:14 AM

QT logo with Question Mark and Blank screen sound ok on training videos

I suddenly had all sort of problems (before 10.4.9) with QT logo and Question Marks throughout all browsers and also suddenly unable to continue training programs using files such as "avibasicmono.htm" and "introbasicmono.htm" .
finally think I have solved the QT logo by replacing Flash 9.0 with the old 8.022.
I could now also see current issues of magazines again on a site www.picturebusiness.uk.com (weird naming).
however I am not able to see the training videos at all but I hear the AVI files
Macosx 10.4.9 Quicktime 7.1.3 (removed 7.1.5 to try that option did not work)
will stay with what works until I hear more...

www.picturebusiness.uk.com uses Flash Media.
Tell us more info about the AVI's. Are they found at that Site?
Give us a link.

MSI GX660R with intel motherboard and compatibility with Samsung 840 EVO SSD

Hi
Im am new to this forum, so I apologize in advance if this post is in the wrong section.
I am considering to replace the hard drive in my MSI GX660R with a Samsung 840 EVO 250 gb ssd, since it has the best benchmark ratings and are very afordable. My laptop has an Intel motherboard with an i7 core processor.
My question in relation to the upgrade is, whether the laptop is compatible with that excact ssd. I plan to run it in AHCI mode, since I have bad expirience with loss of data under RAID. If i chose to run the extra HDD as a secondary drive, it will therefore still be under AHCI.
Can anyone refer me to some sort of compatibility list, or tell me if the above mentioned drive is compatible? I havent been able to find out myself, and MSI is farily difficult to get in contact with.
Any help is appreciated.

Yes, your early 2013 Retina model uses 6.0 Gbps SATA but it's not a standard mSATA connection. You could upgrade using Transcend's JetFlash -> http://www.transcend-info.com/apple/jetdrive/ - to space up to 960GB, however.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

I just purchased Adobe and it converted my pdf with symbols, spaces, and blank "context Not readable"

Hello,
I purchased abode and it isn't converting my pdf into Word. It made gaps, symbols, columns bleed into the other column, and some blank context. I thought acrobat was included. Here is an example below. Let me know if this will be fixed? I don't want to pay for something that isn't working correctly.
Thanks,
Christie R
46 Chapter 3 • AN INTRODUCTION TO THE ADMINISTRATIV E APPLICATIONS OF COMPUTERS
i nsurance company, determines necessary care and treatment, so there is no financial reason for a health care worker to deny necessary care. Managed care also has a schedule of benefits for out-of-network providers. Managed care plans and preferred   provider   organizations (PPOs)
!?ay require that the provider get authorization fore a procedure i s p.eiformed. This is simply permission by the insurance carrier for the pro
_v ir to perform a medicaLpmcr.dure.
In 2010, some private insurance companies began trying to pay doctors for performance "evaluating physicians and paying them accord ing to their 'quality ranking."' However, a study published in The Journal of the American Medical Association found that results are i nfluenced as much by "whom the doctors care for" as by what
doctors do.3
A patient with PPO insurance can seek care within an approved network of health care provid ers who have agreed with the insurance company
to lower their charges and accept assignment (th1 amount the insurance company pays). Th-
.!!lay pay a co-payment, the part of the charge fa'
which_the patient is responsible. The patient ma) choose, however,_to go _o             etwork and lli!J the provider's customary chEges. The i nsurance company may then reimburse the patient a smal amount. There are several government insuranc• plans. They are administered by the federa.LCenter; for Medicare and Medicaid ServicesJ.CMS), for merly the Health Care Financing Administratior
(HCFA). WorkeJ:,'.s_compensation is a gQVem
ment program that covers j                   illness o injury. Millions of Americans receive their heal!! care-through government insurers-some throug fee-for-service plans and some tlu·ough manage. care. According to CMS, Medicaid is "jo intly
    iunded,   federa l-state health insu:ranCe for          er.:
....rai.n-lo:w-income and needy o_e!e." As of 2010, Ms;dicaid cove 29 million children andJ 5 million adul.ts,_14 million old pe and people with

Hi Christie,
The quality of a conversion depends on the quality of the PDF file you start with. Do you know how your PDF file was created (from a scanned document, using software other than Acrobat?). Please see: Will Adobe ExportPDF convert both text and formatting inf…
You may have better luck by disabling OCR as outlined in this document: How to disable Optical Character Recognition (O... | Adobe Community. (Note, however, that isn't a good option if your PDF was created from a scanned document and doesn't contain editable text).
If you decide that ExportPDF isn't going to work out for you, please let us know and we will take care of canceling it for you.
Best,
Sara

How is your mouse setup in xorg? (with a trackpad and pointer stick)

I have found plenty of information on the web to assist in setting
the pointers in xorg. I have a new Dell D830. It has both
a pointer stick and a trackpad.
I want to make sure I have this setup in a sane way.
I'm wondering if anyone has solved these and wants to post a working
xorg.conf for me to try.
1. Is there anyway to control the speed of the pointer stick? I had to do
xset m 1 1 to cancel out acceleration which made it usable. I can live with
it, but I would like to have more control if possible.
2. The trackpad is working including the vertical scroll on the right. But, double
tapping a word in any editor doesn't select the word, triple tapping selects it for a
second, and then deselects it. It is seen the double clicks, though. I can roll up
a window in Fluxbox by double tapping the title bar.
Note, both the pointer stick and trackpad work somewhat with this single device. I'm puzzled
a bit by this. I have quite a few devices to choose from. /dev/event6 seems to do this.
Or may be it's the SendCoreEvents option.
Currently I'm using this
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "SendCoreEvents" "true"
Option "Device" "/dev/event6
Option "Protocol" "auto-dev"
Option "LeftEdge" "100"
Option "RightEdge" "900"
Option "TopEdge" "100"
Option "BottomEdge" "900"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "1.16"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "TouchpadOff" "0"
Option "CircularScrolling" "on"
Option "CircScrollTrigger" "0"
EndSection
available devices
crw-rw---- 1 root root 13, 64 2007-09-09 22:38 event0
crw-rw---- 1 root root 13, 65 2007-09-09 22:38 event1
crw-rw---- 1 root root 13, 66 2007-09-09 22:38 event2
crw-rw---- 1 root root 13, 67 2007-09-09 22:38 event3
crw-rw---- 1 root root 13, 68 2007-09-09 22:38 event4
crw-rw---- 1 root root 13, 69 2007-09-09 22:38 event5
crw-rw---- 1 root root 13, 70 2007-09-09 22:38 event6
crw-rw---- 1 root root 13, 71 2007-09-09 22:38 event7
crw-r--r-- 1 root root 13, 63 2007-09-09 22:38 mice
crw-r--r-- 1 root root 13, 32 2007-09-09 22:38 mouse0
crw-r--r-- 1 root root 13, 33 2007-09-09 22:38 mouse1
crw-r--r-- 1 root root 13, 34 2007-09-09 22:38 mouse2
crw-rw---- 1 root root 13, 128 2007-09-09 22:38 ts0
crw-rw---- 1 root root 13, 129 2007-09-09 22:38 ts1
crw-rw---- 1 root root 13, 130 2007-09-09 22:38 ts2

Firefox 8 is here
* getfirefox.com
check Google toolbar incompatiblity article
* https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox

Find users with Role A and Role B but not Role C

Hi all.
How can I find users that have a combination of roles? The find user and user reports only have one line for selecting a role the user has. Is there a report that lets you select multiple roles? It would be really handy!
Thanks,
Jim

If you haven't found it, there are likely no such reports, but it is easy to do that in a custom report. The problem is that its really badly documented how to make a custom report. But, it's really not that difficult if you know what to do. I will, when I get some spare time, post a guide here on how to make a custom report, the way I, and some other people, think it should be done.
Roughly a custom report consists of three parts, a listing object, to make the report turn up in the report list, a report form, and the report WF. The trick is to know the correct subtypes, attributes and such.
But take a look here Sunday, and there will possibly be a nice custom report guide posted.

How to get the disco model with all tables and fields ?

Hello !
I have to make a document showing all the tables and fields I have in my EUL ... This would be a good documentation for our company and our clients too !
I haven't find any ways to perform this directly from disco admin and I can't make a query using the EUL tables ...
Please Help ...

Hi,
I am assuming you are using Discoverer 4.1/4i. In the Oracle Home\Discvr4 directory contains an EUL4.eex file. Import this in Admin edition, and it will create a business area on your EUL. Then you can get details on the Folders and Items and use it to create reports....
Cheers
Deepak

Question on model crashes (compiled with Matlab 2013b and Veristand 2013)

These models were compiled with Matlab 2010a and Veristand 2010 and when I deploy them to RT target with Veristand 2013, everything works correctly.
Now I compiled the same models with Matlab 2013b and Veristand 2013...they are successfully deployed to the same RT target but when I start the model (set model command to 0), the RT side crashes.
The strange thing is that I found if I set the initial state of model to running, this crash won't happen but when setting initial state to paused then manually set model command to 0, RT machine crashes immediately. Have any one come across the similar issue? I feel it's something to do with the initial condition but wonder why it doesn't happen when compiled with Matlab 2010a and Veristand 2010.

That behavior definitely sounds odd. I would expect models that worlk in previous versions of VeriStand to work with newer ones as well.
With that said several other things have changed in the interum between VeriStand 2010 and VeriStand 2013.
I see you have already contacted us through a service request, we will continue troubleshooting there for the moment.
Craig H. | CLA | Systems Engineer | National Instruments

Find model # with fried motherboard and blank sticker

Similar Messages

Maybe you are looking for