FIND NOTES FROM REAL INSTRUMENT LOOP?

Hello,
Is there a way to get/find the notes to a real instrument blue loop (Cinematic Transition 43)?
When I edit it, it only shows me waves. Thanks and let me know anybody!

I think the plug-in "Melodyne" should be able to help you with the issue.

Similar Messages

How Can I Turn A Software Loop Into A Real Instrument Loop?

My primary reason for wondering about this is that one of my songs requires a windchime sound throughout...but not too much of one. Just a touch of windchimes. The Orchestra Kit has a few pretty good windchime sounds BUT the natural sustain is too long for what I want. If figure I can get my wisp of a windchime if I can convert my miniscule software loop into a real instrument loop then whittle it down to the sound I want.
How can I make this conversion?

Well, Hangtime...You were absolutely right (again!) about messing around with the notes preferred over dissecting them.
I got an absolutely gorgeous windchime sound from applying a couple of carefully auditioned filters and then messing around with the volume at the end of each note. It actually turned out better than I had imagined. It turned out so very nice that I gave it a well spaced looping rhythm and now the windchime is throughout the entire song and the song is better for it.
My dissection effort didn't get a natural sounding windchime effect at all. I trashed it almost immediately.
hugs

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Hi, I would like to ask about how to capture data from real time loop.

Hi,
Here is some overvier of my project:
I have done real time control using labview 9.0. I used PID controller.
In order to optimise this controller, I need to capture data from my sensor(input) and actuator (output).
1. For example while real time control is running. I need to capture 1000 sample data (sensor(input) and actuator (output)).
Then I will used these data for PID optimisation on the other loop without intefere my real time loop.
2. When PID optimisation is completed, I will sent its PID parameter to real time control loop.
3. These operation is done in parallel.
Anybody can help me to solve these. Your idea may solve my problem.
TQ

Typically you will have to use RT FIFO or Queue communication to avoid any impact to your time critical loop.
Best regards
Christian

Will Not Create Real Instrument Track

When I try to create a Real Instrument track nothing happens. Any ideas? I'm using GarageBand 3.0.5 (104.10)

I'm having the same problem and using the same version of GarageBand - 3.0.5 (104.10).
When I go to create a new track and choose "Real Instrument," the Track Info always says "Software Instrument" regardless of what I click. I'm trying to record a banjo without any pickups, so I can't plug in, but without being able to indicate that I'm recording a real instrument, I can't use the built in mic either.
Please help!

How to remove clip of static from Real Instrument tracks

I posted about this a while ago and never followed up on it [http://discussions.apple.com/thread.jspa?threadID=2454679&tstart=0].
Original question: I've been heavily trimming vocal/real bass guitar parts. And at the beginning of the track, there's a blip, or one-second clip, where you can tell I trimmed the part. Is there a way to get rid of/hide this?
The thread closed so I'm making this new one. I tried the link mentioned in the original thread, but it just said to drag the clip left or right. That didn't solve the problem. The boarder from that thread also said something about "zooming in at a zero-cross," and that's what I'm following up on now. Can someone expand on this? How do I do it?

rsherid wrote:
something about "zooming in at a zero-cross,"
if you think of a sine wave, there is +, 0, and -, above, at, and below the zero cross line which you see in the waveform ... the middle is zero. if the waveform is cut at a point above or below zero there will be a "click"
GB is not an audio editor, so it's not a perfect tool for finding the zero cross line. zooming in can help, but an audio editor that can zoom in to the "byte level" is the best tool for editing audio:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Suddenly no sound from Real Instrument

Hey all! thanks in advance.
We've been using Garageband 1.1.0 for awhile now as an easy Voice Over tool. Recently we reformatted our computer and now Garageband doesn't recognize our microphone.
Here's what I've tried so far:
-The microphone DOES work outside the computer
-I tried a different port in the G5 and a new firewire cord that connects to our recording interface
-I tried a different computer (a G4)
-I tried the muting, volume, pan, channels, etc.
-The monitor IS on
*The track is a No effect voice track, channel 1, mono (which is what we've been using all along)
Here are the specs:
G5 10.3.9
Garageband 1.1.0
Shure SM57 dynamic microphone is connected to the M-Audio Firewire solo recording interface which is connected via firewire to the G5.
Thanks for your help!
G5 Mac OS X (10.3.9)

Did you reinstall the m-audio's drivers. Does the mic show up in System Preferences > Sound > Input. Did you choose the interface in Garageband Preferences. Is the track enabled.

Real Instruments Tracks Not Playing

In one of my songs, the real instruments do not play. However, I can hear the reverb and echo for these tracks. The tracks still respond to editing. The drum loop and Software Piano play just fine.
Last night, all tracks worked properly, even after deleting a real instrument track. I saved and shut down for the night.
After booting up today, the remaining real instrument tracks have only very minimal volume; really, just a faint whisper. Track info remains the same and I can see some real instrument track monitor activity, but that's about it for the real instruments.
In response to some earlier advice, I created a new Real Instrument and/or a Software Track and see if they are soloed. Nothing, no "hidden" soloed Track.
The real instrument tracks remain silent, though fully editable.
Any assistance would be great.

I went into the master track to see what's going on.
Ducking option was not highlighted, so I clicked on it just to see what would happen. It unlocked all locked tracks, but not the real instruments for some reason. Then, I removed Ducking option.
All real instruments have returned. Problem resolved.
It was something to do with Ducking.
Each day I learn something new. Life is good.

How to convert a real instrument file into a software instrument loop?

Thanks.

You can't convert real instrument to software instrument.
But you can have your real instrument make into a
real instrument loop.
In edit chose add to loop library (translation may not be accurate I use GB in french)
Your audio section must be higtligthen
Message was edited by: Vince Burn

Looping real instruments - follow time of project option not selectable

Hi,
I've recorded a real instrument track, now I would like to make it loopable and safe it to the instruments library.
So, I trimmed it to the desired lenght and wanted to export it.
Now my problem:
the export option "follow time and tonality" is not selectable irrespective whether or not I checked the box at the bottom in the edit track window that should allow the loop for following the project parameters.
Does anyone know what could be the problem?
THANKS

It seems that it is crucial to adjust the region one wants to loop to an integer bar lenght, then recheck the box, follow time and tonality in the track window. I have noticed that although following the same proceedure sometimes it not possible to export the such a loop as one that follows the tempo of the song (unable to check box, in the loop-export dialogue). To me the reason is not completely clear, often it requires some trial and error, import loop in new project to export it as a tempo following one.

Real Instruments Not playing - effects are

In one of my songs, the real instruments do not play. However, I can hear the reverb and echo for these tracks. The tracks still respond to editing. The drum loop and Software Piano play just fine.

Thanks for the suggestions. I can't remember deleting any tracks... however, how would i check for "hidden" tracks?
The funny thing is i can hear the effect returns for the real instrument tracks...tracks that are heavily reverbed i can hear a faint echo of the track. and like i mentioned the drum loop and software piano still play fine.
And, I also see monitor activity in the real instrument tracks when i play the song. Everything looks normal, but of course, the sound isn't there.
Thanks again for your help!
Message was edited by: Ike the Longshoreman
P.S. I just tried Unsolo all tracks and Unmute all tracks... still the same problem.

No Sound From SOME Real Instrument Tracks

All tracks (real, software & guitar) are recording properly and play back is fine. Then out of the blue a previously recorded real instrument track will not play back. Software tracks are playing and "blue" drum loops are playing back back, but not real bass or real guitar tracks.
The wave files are there and the activity is visible. The volume meters are moving, but there is no sound. The track is not muted and no tracks are in solo mode.
I can copy and paste the tracks and they play again, BUT they loose quality and all of the sequencing, as far as where the region sits in the song, is lost.
Any one know how to fix this?
Thanks in advance.

BobbyQ3 wrote:
your suggestion to toggle the Ducking WORKED. I'm back in business! THANK YOU VERY MUCH.
you're welcome, enjoy

Can I get Notation when recording from a "Real Instrument"?

Hi all,
I am plugging my Triton TR keyboard to my interface.
When in GB, I can record as a "software", and I can get the notation because I am using the soundbank of GB.
I would like to use the soundbank from my Triton TR, so I use 'Real' instrument, but at the bottom of the screen where it shows the details of what Im recording, I can only see waves, not the notation.
Can I see the notation that I am playing from the 'real' instrument?? Because I know that its receiving the information of 'what' I am playing because my midi is connected as well.
Can anyone help?
thanks a million

You can record midi and audio in parallel, so you can see the notes of what you played. But changes in the recorded midi track won't affect the audio, since you don't send midi out to trigger your keyboard's sounds.

Real Instruments play beyond end of repeated loop

I've tried every google-fu trick I could think of to see if anyone else has had this problem.
I record a real instrument (say an electric guitar riff). I drag/repeat/loop it 3 or 4 times. It plays properly.
Then at some point I select it, and move it left or right.
The part starts at the right time, but will repeat an extra time beyond the visible onscreen loop. Once this glitch occurs, neither resaving, shrinking/re-repeating, moving it around and then back to where I want it make the track end when it's supposed to.
The only way I've found around it, is to end the repeat early and let the erroneous repeat play out, or just end the repeat entirely, and use cut'n'paste instead.
This happens to me *all the time*... anyone else seen this or have a resolution?

Thanks for the suggestions. I can't remember deleting any tracks... however, how would i check for "hidden" tracks?
The funny thing is i can hear the effect returns for the real instrument tracks...tracks that are heavily reverbed i can hear a faint echo of the track. and like i mentioned the drum loop and software piano still play fine.
And, I also see monitor activity in the real instrument tracks when i play the song. Everything looks normal, but of course, the sound isn't there.
Thanks again for your help!
Message was edited by: Ike the Longshoreman
P.S. I just tried Unsolo all tracks and Unmute all tracks... still the same problem.

Couldn't find the adequate forum. I run win 8.1 and the adobe acrobat dc ap on my computer edoesn't acess the doc cloud. I can´t turn the mobile link on. I can acess the clud from my browser, but not from the desktop ap. I can acess from my mobile ap

couldn't find the adequate forum. I run win 8.1 and the adobe acrobat dc app on my computer doesn't access the doc cloud. I can´t turn the mobile link on. I can access the cloud from my browser, but not from the desktop app. I can access from my mobile app.

Can you please post a screenshot of your Acrobat DC when launched, without opening a PDF?
Thanks,
-Amboo

FIND NOTES FROM REAL INSTRUMENT LOOP?

Similar Messages

Maybe you are looking for