Find ODS's with data that is not activated

Hello,
Does anyone know a systematic way to find ODS objects containing data loads that are not activated?
we are working on a system upgrade and this is one thing that we have been asked to identify.
Thanks,
Nick

Hello,
I found something that will work.
In RSA1 I clicked on the 'Modelling' tab in the left pane.
I then clicked on the 'Status Overview' and I was able to review the ODS's there.
Thanks,
Nick

Similar Messages

  • Clean-up all data that did not match with the selection.

    Hi Everyone,
    In my requirement I need to  Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
    Pls suggest me...

    Hi Meenakshi
    Try  delete lt_cdpos where kunnr  NE KUNNR (from selection screen) .
    Before Checking <condition> make sure both comparing field type match with each other.
    You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
    Regards
    Parveen

  • I have a hard disk drive with data that i want to back up onto another hard disk drive. I tried just copy and it won't let me paste it in the new drive. I have also tried to drag the files across and they won't go across. Does anyone know how to do this?

    I have an external hard disk drive with data that I want to back up onto another extrnal hard disk drive. I have tried to copy and paste but this wont give me a paste option. I have also tried to click and drag but it wont let me either. I have reformatted the external hard drive to accept both mac and pc files and this did not make any difference. Can anyone help me with this?

    How did you reformat the drive? If you formatted it as NTFS, your Mac will not be able to write files to it unless you use a small application such as Paragon's.
    Please reply as to how you formatted the drive.
    Clinton

  • Statistic report with figures that will not change when rerun months later

    Hi,
    Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
    My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
    I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
    Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
    Please advise.
    Thank you.

    What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

  • I am having trouble with songs that will not play completely through.

    I am having trouble with songs that will not finish playback. The songs play about 75% of the way and then stop mid-song. This is true for my PC and songs transferred to my iPod. I have redownloaded (and repaid) for one song to see if that helps, which it did. But that can become expensive as I am starting to find an increasing amount of songs that are haaving this problem.

    Take it to a genius bar. It's probably something with the magnets.

  • Checking my plug ins there is a list of plugs that are not active. How do I find out if I should turn them on or not? Clicked on research no help?

    When I checked the plug ins there are some that are not active. How do I know which ones to make active? When I clicked on research it just took me to a google search with a lot of different site to go to. Is there a way or a place to find out which ones should be activated? When I go to a site general don't understand what they are talking about. There were some that I thought I should activate, but don't want to do that with out checking. Last time I did something with out checking had lots and lots of problems. (some REALLY GREAT PEOPLE on this site helped me get things working again) Want to avoid that situation if possible. Thanks

    You need to go to add-ons, and when it opens up, there are a list of things to the side, and then click extensions.

  • Can EJB 3.0 beans be used with tables that do not have a primary key?

    Can a EJB 3.0 persistence bean be used with tables that do not have a primary key defined? I am building a test application based on the HowTo - Building EJB 3.0 Faces App paper posted after Openworld (schalk). The issue I am running into when trying to run the application is: Exception Description: Entity class [class com.persistence.Rpthead] has no primary key specified. Note: I get a simular error when using toplink directly.
    The tables I am binding to do not have primary keys defined. They use unique constraints to manage the table integrity.
    Is it possible to use EJB 3.0 on tables without a primary key? If not, are there plans to support this in the future?

    The spec requires a primary key Id annotation. I will take your suggestion to EJB 3.0 expert group.
    Can you also send an email to [email protected] with your requirement?
    -Debu

  • I have a new Windows laptop with iTune that is not recognizing my iPhone 5?

    I have a new Windows laptop with iTune that is not recognizing my iPhone 5? I have the latest version of iTune and when I open iTune it comes up with an error message that " the registry settings used by the itunes driver for importing and burning CDs and DVDs are missing" Thismessage always come up, even after installing the latest version of iTunes.

    Same is here
    Have a MacBook Pro , upgraded to Lion and now cannot download music from CD to ITunes "... An unknown error occurred (-50)".
    Help

  • I often get emails with attachments that will not open with my mac. Is there any free software to help this

    I often get emails with attachments that will not open with my mac often a small ? will show. How do I open these

    What kind of attachment? Post an example file name.

  • After updating to Maverick some emails arrive with contents that do not belong to Sender and title.

    Since updating to Mavericks I'm receiving some e-mails with contents that does not match the Sender and Title. Also receiving blank emails that DO have contents on my iPhone.

    HI..
    A rebuild can help >  Mail (Mavericks): Rebuild mailboxes

  • Error while TRANSFER System is trying to write data that were not locked

    Hi Everybody,
          I am encountering a Error Msg when i try to TRANSFER plan values .The Error masg is
    "System is trying to write data that were not locked".
    I never got this msg before. I checked my Planning query, it looks fine. I have the cells in Blue but couldn't change values or create new records.
    I have the locks set up in RSPLSE too.
    I am on BI-7 IP SP12.
    regards,
    Roger

    Hi ,
      Below is the reply i got from SAP this morning... i have asked my basis team to apply the note.. will update after i test my layout.
    *************Reply from SAP *********************
    I was able to replicate the issue in your system.
    Please implement the note 1153756 in your system.
    1153756 : Template: BI 7.0 (SP18) / BI 7.1 SPS06
    This note will solve your issue.
    If the issue still persists then , please try using a blank value for
    RSADMIN parameter RSPLS_DATA_CHECK_WRITE = X.
    This parameter triggers some 'extra' checks.
    Using a blank value should avoid these error message which you are
    getting.
    regards,
    roger

  • Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?

    Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?
    I bought in 14 january 2014 and the expiration said it will be in 5 september 2014
    Is it mean that my ipad had been activated in 5 sept las year?
    But the packaging is good and it looks like very new.
    Please help me....
    I bought in IT plaza in kuala lumpur, malaysia..
    Heeellllppp...

    The merchant told me it is new. And when they opened the box and turn the ipad on, the ipad asked me to activate first.
    Is the 'restore to factory setting' can make us must activate the ipad again??

  • What will going to happend with app that are not ready for IOS 5?

    What will going to happend with app that are not ready for IOS 5?

    Most applications will work just fine.  I typically have 150 or so apps installed, and typically only 1 or 2 will "break".  The vast majority of apps will continue to operate just as well as before if not better.  iOS developers are privy to beta testing the upcoming OS, so the week or so before and after the official release you'll see a larger number of apps needing to be updated than normal.  Last night I updated 23 apps, and you'll see alot over the next week or two getting updates.  Most are making minor changes to take advantage of new APIs, or add a new feature based on a new function of the OS (like twitter integration into the OS for example).  Very few apps, (maybe 3-4 percent??) actually are getting updated because they're broken, but there will be a few.  Most of the time, any apps that would break will have already been addressed in an update prior to the release of the new OS, and you've probably already updated that app so that it will work seamlessly and perfectly after the update hits.

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • The option 'Display Credit Balance with negative sign" was not activated.

    I've encountered with a huge problem after load opening balance.
    I forgot to tick the  option 'Display Credit Balance with negative sign"
    It makes my client's Chart of Account  uncommon such as credit balance in Cash Account, AR .....
    However, I've search the sap  note to solve it  as follow:
      Description of the bug::     
    When creating the company in the system the option 'Display Credit Balance with negative sign' was not activated.
    Once transactions were created in the system the functionality can not be changed.
    Limits of the query:     
    After running the update query, please restart SBO first and then   run the restore 'GL account and bp balances';
    otherwise, the cashed value of SBO will not be updated and restore function may not take effect.
    1. Meaning of  restart SBO => restart SBO Service Manager right?
    2. Please help me please to find "The restore G/L account and bp balances" form.  Where is it?;
    Thank you

    Hi,
    I would think that you are following the PEQ instructions for note 970813, correct?
    If this is the case and you are using 2007 then you will find the restorev in the top menu; Help -> Support Desk -> Restore. You will find the functions here. Please note that this should only be used on direct instruction from support or a note like in this case. A backup should also be taken before running restore.
    Regards,
    Jesper

Maybe you are looking for