Find out settings of old installation?

I have a Oracle 9 RDBMS installed and want to install the same components on a new system. How can i find this out from the old installation?
Thank you!

A good way is to run "opatch lsinventory -detail".
It will show you all the components installed and their versions along with any patches installed, so that you can setup the same on the other machine.
VJ

Similar Messages

HT4113 how can I find out 14 year old daughter passcode on iphone?

how can I find out 14 year old daughter passcode to access iphone?

Ask her what it is. Other than that, there's no way do figure it out.
If it's been forgotten, you'll have to restore the phone using iTunes.

How do i find out when my old desktop was purchased or built?

We have a HP desktop model a1512x and would like to find out approx when it was sold or built. S/N is [edited] but when I key that in on HP's site it doesn't come back with anything. Just wondered if there is someplace else to look.

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
Based on the specs of your HP Pavilion Media Center a1512x Desktop Computer, this model was introduced for sale on or around 23-May-2006. Please contact official HP Customer Support in your region / country, via the HP Worldwide Support Portal, to request a more accurate date.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Way to find out settings for an encoded mpeg file

Not sure if this is possible, but is there a way for compressor to tell me what the quality settings were for an mpeg file I already encoded? I just want to know what the avg and max bit rates were for the file.

If you changed the settings of a preset and didn't save them, then I don't think you can. You can see what the data rate of the file is by looking at it in quicktime (CMD+i), but Compressor will only tell you what preset you used to encode your file (in the History window).
If you saved the settings, you can look in the preset.
Andy

I am trying to find out if I can upgrade my old airport express from WEP to WPA2? If so, how do I do that?

I am trying to find out if my old Airport Express can be upgraded from WEP to WPA2? If so, does anyone know how to do this? I have a new PC for work reasons and I cannot get online with my WEP password. I realize now this is why my family and friends who bring PC's into the house cannot connect - I need WPA2 for PC, and besides, I should upgrade anyway as this is more secure than WEP. Thanks for any help!

Clone your system.
Install the 10.6.8 Java update.
Clone back from your clone you made before installing the update when finished.

How to find out the current workspace?

Assume I have a couple of possible workspaces on my harddisc.
Can I find out for a JDev installation which of them is currently used?
Peter

respect...
you didn't explain yourself properly. I too wondered if you were writing a JDev extension which this is a common question that comes up. Use case is everything when it comes to helping people to understand what you are trying to achieve.
If you hold your mouse over your application or project file icon in the application navigator it displays the full path of the current workspace/project.
Brenden

Is there any way to find out exactly when I bought my mac

is there any way to find out exactly how old my mac is. I know I bought it in 2009 but I am trying to find the exact date.

Enter the serial number here and it will tell you all that and more:
http://www.appleserialnumberinfo.com/Desktop/index.php

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

I have an iPhone 4S that is a replacement of a defective 4s and it shows over 3Gb of data backed up in the cloud from my old 4s. How can I find out what is in this backup? It is preventing me from backing up my new 4s to the cloud due to the amt of data.

I have an iPhone 4S that is a replacement of a defective 4s. When I activated the newer phone, I believe I transferred over everything except pictures (had multiple failures trying to backup and restore). Now the phone shows over 3Gb of data backed up in the cloud from my old 4s. How can I find out what is in this backup? It is preventing me from backing up my new 4s to the cloud due to the amt of data. It may be duplicated info that I don't need or I may want to archive the backup or parts of it like pictures.

You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device?

I have a very old G$ that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. Thanks!

I have a very old G4 that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. I would rather not buy the old 10.2.8 system as it is expensive. Thanks!

Need to know which newer one, some cannot run 10.2.x.
One solution might be to clone the 10.2.8 Drive to another drive, then Install a later OS on it Preserving Users & Settings.
Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html
Relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Ways to find out modifications in base oracle apps installation

What are different ways to figure out what all has been changed ( modified ) in a base oracle applications installation ?
Basically need to find out in a 6 year old installation, what all objects / forms / modules where "modified", and not "extended". Assume that not all changes were done using a standard nomenclature.
e.g. I read somewhere, to figure out what all "new" tables were created, a sql query on creation_date in all_objects or all_tables etc may give some hint/s.
Is this right ? also how do we check for other objects like stored procs, seeded forms, other objects ?
Thanks!

Go to monitoring, expand reports, select Software Distribution Package and Program Deployment status and then select status of a specified package and program deployment, select your package and program deployment, and then you can see all successful,
failed results and you can click and see further details. If you send it through task sequence use the task sequence deployment status to see the results.

Way to find out old Encryption Key

Hey everyone,
Is there a way to find out the old Encryption Key? I just recently upgraded an old 5.9 database to WT6 PL10. I am getting the Padding error, however I used the same Private Key from the old database and matched the Installer to it. Is there a way to find out the old private key? Not sure how it changed... If I can't figure out the old key, what do I have to do to get the old database online to match the Keys? Any thoughts would be greatly appreciated.
Thanks,
Kristen

The private key is used to create a one-way hash and therefore cannot be discovered by any sort of reverse engineering. Web tools uses RM PKI encryption which is specifically built to disallow such operations.
1) Try recreating the hash by opening the Installer in tasks mode(Installer -tasks from command line)
2) If this doesnt do the trick, re-initialize the synch and clear out only the data that synchs, which does not include themes or catalogs, but be ready for the subsequent sync to take a minute or so, ok more like an hour or more
3) Don't forget to recreate the web.config file(installer -tasks again) if you change the private key. In fact you may wish to do this now, just to be sure it has the right one, and the updated version of it, since this is an upgrade from 5.9(.Net 1.1)

I just synced with my MBP, but my iCloud account email address remains in a "inactive" status. Under settings the Apple ID and Password is wrong, and I can't find out how to fix it

I just switched over to an iPhone 4 CDMA on the verizon network the other day. I connected with my MBP/ w Lion and the sync seemed to go flawless.... All my date was pushed thru the iCloud, but then I saw that my main email address @me.com says that it is inactive when I look at it in Settings- Mail-Accounts. I can see that the iCloud account name and password is wrong, but I can not seem to find out how to correct it. Can anyone help me?
Thanks a lot,
Fred

You either have an incredibly complex computer setup or I think you are confusing terminology here. If you have iTunes set to share your library with others in your iTunes preferences then other computers in the area will see it as an item when they are running their iTunes and have it set to check for shared libraries. Your husband is probably seeing this when running iTunes on his computer. You can disable this sharing on your computer and/or he can set his not to pick up shared libraries.
By the way, an iTunes account is something you log into when you want to buy something from Apple. On your computer it is simply your iTunes collection or your iTunes application. So you need to turn off sharing in your iTunes application preferences.
Your husband is seeing "his" iTunes collection when running iTunes, but it is possible he doesn't have anything in it if it is a brand new computer.

Pages? Can I open really old Claris Works documents with it? I don't want to spend $20 to find out.

Pages? Can I open really old Claris Works documents with it? I don't want to spend $20 to find out. I saved a bunch of stuff back in 1996, and now i need to open it.

Pages opens strictly word processing AppleWorks v6 files.
The problem with ClarisWorks files were they could contain all sorts of objects from databases to spreadsheets, drawings and paint. the iWork suite is not that versatile.
But you really have little choice as ClarisWorks and AppleWorks are both history. If you are going to switch, the sooner the better.
Just keep in mind what Apple did to ClarisWorks/AppleWorks along with many other of their appliactions and technologies theywill ultimately do to Pages.
Peter

I need to find out how to re-set icloud id on my iphone. I already had an apple id which is a family id. I used it as my id when setting up my new company phone. I have new apple id but can't change icloud phone. Still recognizes old id.

I have a new company iphone. When setting it up I used a current "family" apple id I created for the children's itouch's. I realized after the fact that all of their contact/content dat is syncing to my business phone. I created a new apple id for the phone,logged out of the old id and in with the new on my phone. However, it will not allow me to make this same change for icloud on the phone. The icloud is still associated to the old id. How can I change my phone icloud to sync with my new apple id and stop getting the kids content?

In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

Find out settings of old installation?

Similar Messages

Maybe you are looking for