Find out which charateristics that are in use

Hi
We use classes linked to our document types.
And the classes has a lot of characteristics.
Is there an easy way to find out which characteristics that are in use (documentens where values are given), and on how many documents they have been used on?
Best regards
Tom Saga

See if table AUSP serves your purpose.
Regards,
Pradeepkumar Haragoldavar

Similar Messages

Find out particular printers that are being used by background jobs.

Find out particular printers that are being used by background jobs..
Hi Gurus,
I have to remove some printers from SPAD, but before removing those printers I have to make sure that those are not being used by any background jobs. The table TBTCP can be used to identify which jobs are still using those printers, but this is a tedious process.
Any input would be highly appreciated.
Thank you
Adil

Hi Adil,
I'm lazy so I'd just run this SQL
select distinct(jobname), pdest from SAPSR3.TBTCP where PDEST in ('LP01', 'LOCL') ;
Just put the printers you want as shown above and just perform a little manual cross check by checking the job in SM37.
And that's it .....
Cheers,
Amerjit

Is there a way to find out which CSS rules are being used by the different html files?

Is there a way in Dreamweaver CS3 to find out which CSS rules are being used by the different html files, sitewide?
Thanks - Dave

Firefox add-on "Web Developer Toolbar" is a must have. Information > Display Div & Class details.
https://addons.mozilla.org/en-US/firefox/addon/60
Another handy Firefox Add-on to add to your tool chest is called "Dust-Me Selectors."
http://www.sitepoint.com/dustmeselectors/
"It extracts all the selectors from all the stylesheets on the page you're viewing, then analyzes that page to see which of those selectors are not used. The data is then stored so that when testing subsequent pages, selectors can be crossed off the list as they're encountered.
You can test pages individually, or spider an entire site, and you'll end up with a profile of which selectors are not used anywhere."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How to find out, which RFC-Destinations are in use?

Hi community
We have a huge list of RFC-Destinations in our productive system and I want to delete unneeded entries.
Is there a report or a log, which shows, which RFC-Destinations were used, and when?
Thanks in advance.
Regards, Michael

HI
can you see the default trace in tcode SMGW, Be careful about deleting any system rfc.
Read the documentation about default RFC, internal RFC, LDAP_RFC, transport RFC.
I don't know other way to do that you need
Regards
William Neira

In CS5 can I find out which brush is currently in use so that I can slect it again later?

in CS5 can I find out which brush is currently in use so that I can slect it again later? I can't figure this out

Chris, I just ckecked and realized that the problem is only with CS5 64bit, I'm on windows 7. CS5 32bit works as you described.
However even if it worked this doesn't help me anyway. I constantly change the size of the brush because I mostly paint but still need to know which brush preset I selected last. Please make a feature that highlights the last brush preset used - may be in a different way (color) if it doesn't match the current brush. It is real pain to find the needed brush. I have hundreds of brushes showing on my 30 inch monitor and I need them all. I spend a lot of times looking for recently used brushes. You can also implement recently used sorting order. I hope this is not very difficult to implement. Im sure that a lot of artists use many brushes like me, just look at all Photoshop painting instructions videos, even the tutorials are boring when watching how long it takes to find and select the needed brush.

How to find out which sequence a certain column used?

you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?

In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc.

How can I find out which vi's are dynamic?

I am working on a project made up of hundreds of VIs. I have to make an standalone executable version of it. I was not the original developer. Is there a way I can scan the vi's to find out which of them are dynamic? What should I be looking for as a telltale sign of being dynamic (What makes a vi dynamic?)
Are all vit's dynamic? (I was told by my senior developer to include all vit's in the dynamic section of the build dialog box.)
Message Edited by rashid19672008 on 02-27-2008 03:25 PM

This is not a property of a VI, but rather a way of using it. You can call any VI either way (or both ways), so whether a VI is called dynamically depends on your code.
One way of finding whether a VI does not have static calls is to open all the VIs in the hierarchy at the same time and then go over each of them in a loop, open a reference to it and check its "Callers" property. If the array is empty, it means that this VI is not called by any other VI currently in memory and might be called dynamically. It might also mean that it is an old VI and is not used any more.
Another option is to create a copy of the hierarchy using File>>Save With Options. LabVIEW will only copy the VIs which are called statically and you can then compare the hierarchies for files which are only found in the original.
Try to take over the world!

How to find out Which SAP programs are affecting Which Z programs?

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

HT1338 HOW CAN I FIND OUT WHICH SERVER MY MAC IS USING?

HOW CAN I FIND OUT WHICH SERVER MY MAC IS USING, KEEP GETTING MICROSOFT SQL SERVER ERRORS
WHEN TYPING IN ADDRESS'S?

If your computer is tied to a network, then there is a way to check. Go to System Preferences, and click Accounts. unlock Admin
then you can click Login Options.
under that, Network Account Server. This should show you what server your computer is tied to. If you aren't in the tech department, you could try asking them.

How to find out which materialized views are running on the DB?

So I have a long list of MVs stored on the DB.
Is there a script to find out which MVs are being refreshed right now?
Help!
Thanks

Hi ,
You can use the following data dictionary view to get information on when Mview was last refreshed--
SQL> desc DBA_MVIEWS
Name                                                  Null?    Type
OWNER                                                 NOT NULL VARCHAR2(30)
MVIEW_NAME                                            NOT NULL VARCHAR2(30)
CONTAINER_NAME                                        NOT NULL VARCHAR2(30)
QUERY                                                          LONG
QUERY_LEN                                                      NUMBER(38)
UPDATABLE                                                      VARCHAR2(1)
UPDATE_LOG                                                     VARCHAR2(30)
MASTER_ROLLBACK_SEG                                            VARCHAR2(30)
MASTER_LINK                                                    VARCHAR2(128)
REWRITE_ENABLED                                                VARCHAR2(1)
REWRITE_CAPABILITY                                             VARCHAR2(9)
REFRESH_MODE                                                   VARCHAR2(6)
REFRESH_METHOD                                                 VARCHAR2(8)
BUILD_MODE                                                     VARCHAR2(9)
FAST_REFRESHABLE                                               VARCHAR2(18)
LAST_REFRESH_TYPE                                              VARCHAR2(8)
LAST_REFRESH_DATE                                              DATE
STALENESS                                                      VARCHAR2(19)
AFTER_FAST_REFRESH                                             VARCHAR2(19)
UNKNOWN_PREBUILT                                               VARCHAR2(1)
UNKNOWN_PLSQL_FUNC                                             VARCHAR2(1)
UNKNOWN_EXTERNAL_TABLE                                         VARCHAR2(1)
UNKNOWN_CONSIDER_FRESH                                         VARCHAR2(1)
UNKNOWN_IMPORT                                                 VARCHAR2(1)
UNKNOWN_TRUSTED_FD                                             VARCHAR2(1)
COMPILE_STATE                                                  VARCHAR2(19)
USE_NO_INDEX                                                   VARCHAR2(1)
STALE_SINCE                                                    DATE
SQL>

How can I find out which portal users are logged in portal?

Hi
I need to know where can i find information about which portal
users are currently logged in to portal. Are there any api or
built-in functions which will help me find out this information?
Thank you for your immediate help!!

I too would like to find out which users are loggeg on. We need
to restrict users to one login or session if possible.
Thanks,
Tom Henricksen

How to find out which site and list is using InfoPath form

Hi,
We have a site collection with 100+ sites. We are doing analysis of these sites for SP-2013 upgrade, I would like to know which site lists are using a InfoPath form, how do I find out this without manually going through all the
sites & lists.
Thanks,
Pat

Hi
You can Use sharepoint Manager to do so.or use below link
http://blogs.msdn.com/b/david/archive/2011/08/25/powershell-script-to-locate-content-type-useage.aspx
http://aarebrot.net/blog/2011/02/using-powershell-to-retrieve-content-types-and-associated-fields/
As info path form deploy as content type you can find usage of content type
Regards, Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful http://sharepointundefind.wordpress.com/

How to find out which C library I am using?

On my Solaris 9 UltraSparc system,
% echo $LD_LIBRARY_PATH
/opt/gcc/3.4.4/lib:/opt/glib/2.12.1/lib:/opt/gnome/lib:/opt/openssl/0.9.7g/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Solaris 10 x86 system,
% echo $LD_LIBRARY_PATH
/pkg/gcc/4.2.1/lib:/opt/gcc/current/lib:/opt/glib/2.10.1/lib:/usr/sfw/lib:/usr/lib/mps:/opt/openldap/lib:/opt/openssl/current/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Linux/x86 system,
% echo $LD_LIBRARY_PATH
/opt/openssl/0.9.7g/lib:/opt/gcc/3.4.4/lib:/opt/binutils2.13/lib:/opt/glib/2.12.1/lib:/opt/java/j2sdk1.4.1_01/lib
% /lib/libc.so.6
GNU C Library stable release version 2.6.1, by Roland McGrath et al.
From the above, can one tell what C library I am linking to on the Solaris systems? If not, how can one tell? How do I know the exact location of the C library I am using?
On the Linux/x86 system, I can use gnu_get_libc_version() to find out the version of glibc I am supposedly using. But it does not work when I compiled the identical C program using gcc on the Solaris 9/UltraSparc and Solaris 10/x86 systems. If I can use gnu_get_libc_version() , does that mean for sure that my C program links to glibc? On the other hand, if the linker reports that gnu_get_libc_version() is not found, does that mean for sure that my C program is not linked to glibc?
Is there a function on the Sun libc similiar to gnu_get_libc_version()?
http://docs.sun.com/source/819-3690/Using.Libs.html says "The Solaris operating system comes with several libraries installed in /usr/lib. Most of these libraries have a C interface. Of these, the libc and libm, libraries are linked by the CC driver by default." If one wants to link to the glibc library, how to override the default? How to find out the default? Is it in some environ variable? If one changes the CC driver to gcc, does the default remain the Sun libc? And if one compiles explictly using gcc, i.e. "gcc myprog.c", is the default C library the Sun Library, or glibc?
gnu.org has a (web page for the) glibc manual but I am not able to find a Sun C Library Manual. Is there one?
Edited by: hzmonte on Jun 28, 2008 1:43 AM

I'll discuss only the Sun C compiler here. For questions about gcc, look in the gcc manual, or try a gcc forum.
Run the command "ldd" on an executable file or shared library, and it will report the shared libraries that it will link to, based on any runpath in the file, and on LD_LIBRARY_PATH. Example: % echo $LD_LIBRARY_PATH
LD_LIBRARY_PATH: Undefined variable
% cc hello.c
% ldd a.out
        libc.so.1 =>     /lib/libc.so.1
        libm.so.2 =>     /lib/libm.so.2
        /platform/SUNW,A70/lib/libc_psr.so.1 BTW, except possibly for testing, there is usually no need to set LD_LIBRARY_PATH, and setting it is usually a bad idea. For more on this topic see Rod Evans' blog:
[http://blogs.sun.com/rie/entry/tt_ld_library_path_tt]
Prefer to set a runpath in the executable so that no client needs to set LD_LIBRARY_PATH.
If you want to know what libraries the C compiler will link, based on a given command line, you can add the -v (verbose) option, which will display each subcommand. Or you can use the -### option, which shows what commands would be run. Example: % cc -### hello.c
### Note: NLSPATH = \
/opt/SUNWspro/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/opt/SUNWspro/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### hello.c
/opt/SUNWspro/prod/bin/acomp -xldscope=global -i hello.c -y-fbe -y/opt/SUNWspro/prod/bin/fbe -y-xarch=generic \
-y-xmemalign=8i -y-o -yhello.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly \
-xdbggen=incl -y-s -m32 -fparam_ir -Qy -D__SunOS_5_10 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix \
-D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun \
-Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/opt/SUNWspro/prod/include/cc \
"-g/opt/SUNWspro/prod/bin/cc -c " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
### Note: LD_LIBRARY_PATH = <null>
### Note: LD_RUN_PATH = <null>
/usr/ccs/bin/ld /opt/SUNWspro/prod/lib/crti.o /opt/SUNWspro/prod/lib/crt1.o /opt/SUNWspro/prod/lib/misalign.o \
/opt/SUNWspro/prod/lib/values-xa.o hello.o -Y "P,/opt/SUNWspro/prod/lib/sparc:/opt/SUNWspro/prod/lib:/usr/ccs/lib:/lib:/usr/lib" \
-Qy -lc /opt/SUNWspro/prod/lib/crtn.oThe basic runtime support library is /lib/libc.so.1, on any version of Solaris, used by every compiler version. You can check the patch version of the library by running
showrev -p | grep <patch>
where <patch> is the patch number for the library. The patch number depends on the Solaris version. You can get more information at [http://sunsolve.sun.com].
There is no manual specifically for the C library. There is a Solaris man page for each function in the library, and you can check the C Users Guide and the Solaris Linker and Libraries Guide for additional information.

How to find out which "purchased items" are not authorized?

I have an iPhone 5, and my son has an iPod touch that are both synced to iTunes on my MacBook Pro. Since I upgraded the MBP to Yosemite, I can no longer sync the apps on the iPod; it always responds with "The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod".
The iPod contains apps that are purchased with my Apple ID, and apps purchased with my son's own Apple ID. I have deauthorized all computers from both accounts, and authorized iTunes again for both accounts; however, trying to sync the iPod continues to generate this error message.
Is there any way to find out out which specific app(s) are generating this conflict? If I knew which of the (more than 300 in total) apps cause this conflict, I could probably remove/reinstall/do something about them; but as it stands, the error message doesn't help me at all.

I have an iPhone 5, and my son has an iPod touch that are both synced to iTunes on my MacBook Pro. Since I upgraded the MBP to Yosemite, I can no longer sync the apps on the iPod; it always responds with "The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod".
The iPod contains apps that are purchased with my Apple ID, and apps purchased with my son's own Apple ID. I have deauthorized all computers from both accounts, and authorized iTunes again for both accounts; however, trying to sync the iPod continues to generate this error message.
Is there any way to find out out which specific app(s) are generating this conflict? If I knew which of the (more than 300 in total) apps cause this conflict, I could probably remove/reinstall/do something about them; but as it stands, the error message doesn't help me at all.

How can i find out which apple ids are associated with my ipad

When I sync my iPad I get the message that some songs cannot be updated because only 5 Apple IDs can be associated with an iPad. I am aware of three that we use in my family - mine and my two sons. How can I find out what other Apple IDs are associated with my iPad?

Itunes limit includes computers.
http://www.ilounge.com/index.php/articles/comments/managing-devices-in-your-itun es-store-account/

Find out which charateristics that are in use

Similar Messages

Maybe you are looking for