Find out who has deleted a template

In my system, a project template was deleted.
It was in status "created" before, so it was possible to delete it for all users with the corresponding profile.
Now I would like to find out who has deleted it. Is this possible?
I assume that all data of the template is deleted, so it is not possible to find this information, right?

Daniel,
To my knowledge there is nothing like Deleting an object in cProjects they can only be Archived. One cannot delete a template right away, there is a process or sequence of steps to achieve deletion affect (archiving). In first place you need the authorizations to SAP_CPR_TEMPLATE_ADMINISTRATOR role. Once you have this role the templates needs to be moved through various statuses and then finally gets to Flag for Archiving, once you set the status flag for Archiving there are couple of back end jobs to be run that will actually delete / Archive the template. But still if you have added this template to your Favorites on the dash board you will still be able to get to it.
Now I would like to find out who has deleted it. Is this possible?
This is possible. Go to the data base tables, I don't have them on top of my head will update the thread later.
I assume that all data of the template is deleted, so it is not possible to find this information, right?
No all the data is not deleted it is only archived. You should still be able to retrieve this information from Archives.
Hope this helps you close this thread.
regards
N K

Similar Messages

System log - how to find out who has deleted the req from cube.

^hello friends
how can i find out who has deleted the request from cube ?
i wanted to check the system log , that who has deleted the request from cube .
could you please let me know how to check the same ?
regards
manoj

Hi,
Did you try the method I had suggested. It will work.
Also its better to try the path I had suggested as it will display the logs for that particular Cube only.
But if go through SM37 > B_DEL* it will display all the logs for all the deletion jobs not just this cube and it will be difficult to find out.
Try that and you should get the log.
Thanks,
JituK

How to find out who has deleted the production Query

Hi All,
I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
Please let me know is there any possiblity to kow
How to find out who has deleted the production Query
Awaiting for your replies.
cheers

Hi Mahesh and all,
Thanks for all your inputs.
I have tried with RSRREPDIR tabel , I am unable to see that query at all.
If I use theT-code SLG1,
please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
OR
could you please suggest any other way.
cheers
leena

How to find out who has deleted the postion

Hi SRM Gurus,
In the EBP org structure some one has deleted the position
Around 1000 users were attached to the position. How to
findout who has deleted the Position.what is the method is
there any T.code.(or) any table to check?
G.Ganesh Kumar

pl check if follow thread helps
Change business partner for purchasing organization.
BR
Dinesh

How to find out who has deleted my query

Dear SDNs,
My query has been deleted in Prd system, so I want to know who did it.
I try to get the log from SLG1 and SM21, but I can't get any information about the query deletion.
I have also tried to read record from table RSRREPDIR, and this table can only supply the information of query which is not deleted.
Could you tell you the way to find out it?
Thanks a lot.
Best regards
Tianli

Hi Pravender,
I have tested it.
If you delete the query var T-code RSZDELETE,then you can find the log in SLG1.But if you delete the query in query designer,you can find nothing in SLG1.

How to find out who is delete my query

Hi all,
Today I lose my query in production environment. Is it any other way to find out who is delete my query?
Because we share our server with BPC team, I afraid that they do something in our server.
Thanks beforehand.
Regards,
Steph

hi,
Open the table 'RSRREPDIR' in Dev and give your Query Name in COMPID field and execute.
Take the COMPUID value from that and Go to table 'E071' in production and execute it with COMPUID.
In 'E071' table, there is a field called OBJFUNC. This field get populate with value 'D' is some one deleted the query using transport request, you can also see the transport under which it got deleted.
In case someone deleted it directly in production then it cannot be traced.
regards,
Arvind.

How to find out who has released the purchase order?

Hi All,
I have a PR number lets say 10231322 and somebody has release it. Could any one please tell me how to find out who has release it?
Waiting for your kind replies......
Thanks in advance.
Regards,
Faisal

Hi,
When you are in tr ME23N, use the menu: environment > header changes.
Rgds,
Suzy

How to find out who had deleted the function moldule? S O S

how to find out who had deleted the function moldule Thank you very much.

if this fm was assigned to device class (package) you'll find it in
tables tadir, e070, e071
try with name of function module or function group
hope that helps
Andreas

Find out who has given local administrator rights to standard domain user?

In my Organization i have faced problems with domain administrator, it seem that all of a sudden a standard domain user is having Local administrator rights. Can anyone please help me how to find out who has given local administrator rights to that standard
domain user account?

Hi,
Based on your requirement, you need to enable the auditing in your Active Directory to identify the user/ group changes and WHO made the change etc.
Checkout the below steps to enable auditing for AD User Changes,
1. Open GPMC console, click Start --> Administrative Tools --> Group Policy Management.
2. Right click the Default Domain Controllers Policy, and then click Edit.
3. Navigate to Audit Policy node, “Computer Configuration/ Policies/ Windows Settings/ Security Settings/ Local Policies/ Audit Policy”.
4. Now enable the Success auditing for - Audit Account Management and Audit Directory Service Access.
5. Execute the command “GPUPDATE /FORCE” in the Domain Controller to force apply the GPO settings.
For Windows Server 2008 R2 and later versions, additional configuration is required in “Advanced Audit Policy Configuration” section in Default Domain Controller Policy.
1. Go to the node DS Access (Computer Configuration/Policies/Windows Settings/Security Settings/Advanced Audit Policy Configuration/Audit Policies/DS Access.)
Enable Success auditing for the following settings
- Audit Directory Service Changes
2. Go to the node Account Management (Computer Configuration/Policies/Windows Settings/Security Settings/Advanced Audit Policy Configuration/Audit Policies/Account Management.)
Enable Success auditing for the following settings
- Audit User Account Management
After completing the audit settings, configure SACL in Active Directory Users and Computers console for enabling the geneartion of AD Change events in the eventlog as shown below,
Checkout the below KB article on complete list on Event ID and Description for AD Changes,
http://support.microsoft.com/kb/947226/en-us
Regards,
Gopi
JiJi Technologies

I'm having network security issues, how can I find out who has been seeing my information on my laptop

How can I find out who has been loging on or attached to my network and on to my computer remotly.

Dartrath--
Please give us much more pecific information as to why you think someone is doing this?
What signs and symptoms are you experiencing?

Trace to find who out who has deleted / modified the attendance record

Dear All
Some one has deleted the attendence record of a particular user of previous month , so how i can track who has deleted / modified the same in salary slip it is showing 1 leave record for the same month, but while checking throught pa30 there is no record shown for the same . can you please tell me how to trace that and which tables are updated once we update the attendence and while processing the salary slip , from which table it picks the leave availaed data .
Thx
Shilpa
Edited by: Shilpa on Nov 13, 2009 11:31 AM

Hi Shilpa,
You have to activate the audit Trail.
RPUAUD00 isthe program to see the changes in infotypes records, but before that you have to configure T585A, T585B, T585C
Regards,
Kapil Kaushal

How to find out who had deleted a varient of a report

Hi,
I want to know who has deleted a variant of a report. is there any table or a transaction code from where we can know the login id of the person.
Thanks,
Vinayak

Hello,
Check these tables:
VARI     ABAP/4: Variant storage (similar to INDX)
VARICON     Selection variants: Content
VARICONCI     Selection Variants: Content (Cross-Client)
VARID     Variant directory
VARID_CI     Variant Catalog, Cross-Client
VARIDESC     Selection Variants: Description
VARIDESCCI     Selection Variants: Description (Cross-Client)
VARINUM     Internal number assignment for variants
VARIS     Assignment of variant to selection screen
VARIS_CI     Assignment of Variant to Selection Screen
VARIT     Variant texts
VARIT_CI     Variant Texts, Cross-Client
VARK     Delivery Plan: Customer-Specific Itinerary
VARZ     Delivery Plan: Zone-Specific Itinerary
If useful reward.
Vasanth

Can I find out who has opened a document in Sharepoint 2013 document library?

Is it possible to use PowerShell you find out who opened a certain document in a library in a users MySite? Or can I interrogate the audit logs?
I also have Harepoint installed, but I don't know if this works to a MySite document level?

Hello Alex,
Just save the file with .ps1 and run with Powershell.
you just need to enter the URL and Path as per your liking.
$rows=@()
$url ="https://SP2013.com/"
$site = New-Object Microsoft.SharePoint.SPSite($url)
$webs = $site.AllWebs
foreach($web in $webs)
$listCollections = $web.Lists
foreach($list in $listCollections)
if ($list.BaseType.ToString() -eq "DocumentLibrary")
$dList = [Microsoft.Sharepoint.SPDocumentLibrary]$list
$items = $dList.Items
$files = $dList.CheckedOutFiles
foreach($file in $files)
$wuse = $file.DirName.Substring($web.ServerRelativeUrl.Length)
#Write ($web.Url+ "`t" + $wuse+"`/" + $file.LeafName + "`t" + $file.CheckedOutBy.Name + "`t" + $file.TimeLastModified.ToString()+"`t" + "No Checked In Version"
$row=New-Object System.Object
$row|Add-Member -MemberType NoteProperty -Name "Web Url" -Value $web.Url
$row|Add-Member -MemberType NoteProperty -Name "WUSE" -Value $wuse
$row|Add-Member -MemberType NoteProperty -Name "File Name" -Value $file.LeafName
$row|Add-Member -MemberType NoteProperty -Name "Checked out by" -Value $file.CheckedOutBy.Name
$row|Add-Member -MemberType NoteProperty -Name "Last Modified" -Value $file.TimeLastModified.ToString()
$rows+=$row
$web.Dispose()
$site.Dispose()
$rows|Export-Csv -NoTypeInformation -Path "D:\Rahul.csv"
Thanks and Regards Rahul Dagar

How do I find out who has accessed my computer at a particular time?

Hi,
Someone has been deleting files from my computer at work using another mac through an internal network.
Is there anyway I can find out what computer has deleted the files?
Any help would be greatly appreciated.

Maybe. Launch the Console application and view the following log:
/Library/Logs/AppleFileService/AppleFileServiceAccess.log

How to find out who has release the purchase requisition?

Hi,
I have a Purchase Requisition Number with me and I want to know who has released it. Can any body please help me how to find this?
Waiting for your valuable responses! Thanks in advance.
Regards
Faisal

Hi,
Thanks for your response. However, is there not any tcode by which we can find it out?
By the way I have done the following to find it. Kindly confirm if I have done it correctly:
1. Executed tcode me23n
2. Menu Purchase Requisition->Other requisition
3. Specified the PR number.
4.Menu Environment -> Item Changes
5. Here in this screen, I got some information saying :
Person responsible (user id), Date, Time, Transaction, Change Doc etc..
Here it says that, one user executed tcode me54 and release indicator is changed to 3.
I think this is only the user who has released it.
Anyway, kindly confirm the same.
Regards,
Faisal

Find out who has deleted a template

Similar Messages

Maybe you are looking for