Find position of object in VBox
Hi All,
I have a outter VBOX that gets populated dynamically with
VBOX that contain text and buttons.
The architecture of the containers is below.
<VBOX>
<VBOX>
<text>Item One<text/>
<Button/>
</VBOX>
<VBOX>
<text>Item Two<text/>
<Button/>
</VBOX>
</VBOX>
The objects that are in the outer VBOX box are created
dynamically and do not have explicit heights.
QUESTION: How can I get the height of each of the items in
the outter VBOX?
I have been doing the following:
//Get the children of the outter VBOX
var childList : Array = al.listBox.getChildren();
var total : int= 0;
for(var i1:int =0;i1<childList.length;i1++) {
var child :Object = childList[i1];
var childRect : Rectangle = child.getBounds(container
holding the item);
total = total + childRect.height;
The getbounds call always returns 0 as well as the x and y
coord return 1.
Any suggestions would be appreciated.
Hi,
check this..
DATA: patt TYPE string VALUE `now`,
text TYPE string,
result_tab TYPE match_result_tab.
FIELD-SYMBOLS <match> LIKE LINE OF result_tab.
FIND ALL OCCURRENCES OF patt IN
`Everybody knows this is nowhere`
RESULTS result_tab.
LOOP AT result_tab ASSIGNING <match>.
WRITE: / <match>-offset, <match>-length.
ENDLOOP.
here your pattern should be space . i.e. ' '.
Arunima
Similar Messages
-
MapBuilder Error:Can not find a GeoRaster object with specified rdt and rid
Hello,
I can't GeoRaster data in the preview of the MapBuilder and MapViewer. The GeoRasterViewer shows the Raster images without problems.
MapBuilders error message:
19.11.2008 13:07:11 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
The errror message of MapViewer is nearly the same with some more informations about the spatial query and the coordintes of the query window. If I run that spatial query in the sqldeveloper it returns a result!
I did following stebs:
- saved a tiff-Image in a GeoRaster table with pyramid an tiled images.
- checked the sdo_geom_metadata --> they are correct
- checked the sdo_georaster object for the rdt table name and rasterid --> they are correct
- checked the rdt table --> objects with that rid are saved
- checked the mdsys.sdo_geor_sysdata table --> entry is correct
- validate the geraster with the sdo_geor.validategeoraster function --> object is valid
- updated the spatial extend of the image and try again the preview functio--> the same error
The databse server is a virtual Linux server with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit.
The web server is a Window 2003 R2 Server with a weblogic server and mapviewer patch 5 (Ver1033p5_B081010).
For a test I did the same (the same table script, the same raster data, the same import method) on a developer pc (WinXP Pro SP2) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 (32bit) the same mapbuilder version but with the MapViewer QuickStartKid and it works fine!!!
Has anyone an idea?
Greeting,
Cord
Edited by: Corti on Nov 19, 2008 2:14 PMHi Joao,
Thanks so far.
I'm previewing a GeoRaster theme. I created it with the MapBuilder GeoRaster wizard. The theme difinition is (out of the export file):
RAS_DGK|
null|
RAS_DGK|
GEORASTER|
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster">
</styling_rules>|
(GeoRaster table name is "RAS_DGK", theme name is also "RAS_DGK")
I get following log information:
preview without a coordinate or scale:
MapBuilder Error (as pop up): MAPVIEWER 01005: no spatial data to render
log file:
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-43
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
preview with a center coordinate of the image and a scale:
20.11.2008 10:18:43 oracle.sdovis.SRS getOptimalQueryWindow
AM FEINSTEN: *** isGeodetic=false, unit=METER
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-45
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: 2550045.7746478873,5608500.0,2551954.2253521127,5609500.0
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent, MDSYS.SDO_GEOMETRY(2003, 31466, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?,?,?,?)), 'querytype=WINDOW') = 'TRUE'
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on loading features: 234ms.
20.11.2008 10:18:43 oracle.sdovis.RenderingEngine prepareForRendering
AM FEINSTEN: xfm: 0.284 0.0 0.0 -0.284 -724212.9999999999 1593097.9999999998
20.11.2008 10:18:43 oracle.sdovis.ImageRenderer renderGeoRasterTheme
WARNUNG: GeoRaster theme RAS_DGK has no rendered images.
20.11.2008 10:18:43 oracle.sdovis.VectorRenderer render
FEINER: time to render theme RAS_DGK with 0 styled features: 0ms
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on rendering: 16ms
If I run the sql statement in the log file, it returns a result.
select grt.georid, grt.GEORASTER, grt.GEORASTER.metadata.getClobVal()
from ras_dgk grt
WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent,
MDSYS.SDO_GEOMETRY(2003, 31466, NULL,
MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3),
MDSYS.SDO_ORDINATE_ARRAY(2550045.7746478873,5608500.0,2551954.2253521127,5609500.0)), 'querytype=WINDOW') = 'TRUE';
GEORID
2
GEORASTER
MDSYS.SDO_GEORASTER(20001,MDSYS.SDO_GEOMETRY(2003,31466,null,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(2550000,5608000,2552000,5610000)),RDT_RAS_DGK,522,oracle.xdb.XMLType@194a7ec)
GEORASTER.metadata.getClobVal()
<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>8BIT_U</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>6299</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>6299</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>4</totalRowBlocks>
<totalColumnBlocks>4</totalColumnBlocks>
<rowBlockSize>2048</rowBlockSize>
<columnBlockSize>2048</columnBlockSize>
</blocking>
<interleaving>BSQ</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>6</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<SRID>31466</SRID>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScale="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>17668678.695368 0 -3.14949718277477</polynomialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-8031218.31607409 3.14949718277477 0</polynomialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>1</layerID>
<colorMap>
<colors>
<cell value="0" blue="255" red="255" green="255" alpha="255"/>
<cell value="1" blue="0" red="0" green="0" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
I checked also the content of rdt table and it contains entries with that raster id (= 522).
Finally the log file when I use the preview directly on the GeoRaster table without a theme:
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-55
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER from RAS_DGK grt where grt.GEORASTER.rasterid = ? and grt.GEORASTER.rasterdatatable = ?
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
If you need more information - please ask for it.
Cord -
Unable to find requested Data Object
Hi,
I import a standar data object in my DOE... It is a simple getlist and getdetail.
I import all correctly, but when i activate it appear this error:
"Unable to find requested Data Object"
What happend?
Thanks in advance,
Regards,I delete de data object and the bappi, i create the bappi with the wizard, and now work fine the data object...
Regards, -
How to find out which objects are at the end of the datafiles
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/ -
Hi
New Installation. Sharepoint 2013, Project Server 2013 and SQL Server 2008 SP1 (another box).
When I try to create Project Web App Instance, I get
Provisioning 'PWA': Post provisioning setup failed. Exception 'Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
Followed by:
Failed to provision site PWA with error: Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
Already tried reinstalling the whole farm to no avail. Farm Admin account is used to do everything within this process.
Thanks in anticipation.Hi
I got the same error when provisioning the PWA
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 8/29/2013 11:58:12 AM
Event ID: 6966
Task Category: Provisioning
Level: Error
Keywords:
User: abc\administrator
Computer: mycomputer
Description:
Provisioning 'PWA': Post provisioning setup failed. Exception 'Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
at Microsoft.Office.Project.Server.Administration.ProvisionFeatureEventHandler.FeatureActivated(SPFeatureReceiverProperties properties)
at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce)
at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
at Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
fMarkOnly, SPFeatureDefinitionScope featdefScope)
at Microsoft.SharePoint.SPFeatureCollection.AddInternal(Guid featureId, Version version, SPFeaturePropertyCollection properties, Boolean force, Boolean fMarkOnly, SPFeatureDefinitionScope featdefScope)
at Microsoft.SharePoint.SPFeatureCollection.Add(Guid featureId)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProvisioningFeature(SPSite site)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)'.
Later found that the service application where I was trying to provision the PWA, it was not associated with the web-application. -
Exact, precise positioning of Objects
I have an application that needs to be very precise in the positioning of a text object (so that OCR can read it). As an example, I can position an object at x=3.5 inches but I need to position at x=3.53. I use the "Size and Position" dialog box and enter x=3.53. Get out of the dialog, go back in and it has changed to 3.52, Get out and in and now it is 3.51. Once at 3.5 it stays at 3.5. Position seems to work well at 1/10 of an inch but I need 1/100 of an inch. Snap to Grid & Free-Form Placement Options can be on or off - no difference.
This is my first post.James Terry You sent a reply via email with discussion regarding setting the grid to 0.01 inches (which is 1/100 of an inch). When I sent grid to 0.01" and moved them manually without using "Size and Position" dialog window, the objects stayed where they needed. Going in and out "Size & Position" does cause it to move. But by forcing 0.01" with snap turned on, I GOT WHAT I NEEDED! James: put in a response and then I can award points and mark this answered.
-
Dynamic Positioning of Objects in a Grid (rows and columns) AS3 Tutorial
The topic of a dynamic positioning of objects in a right grid (rows and columns) comes up often so I decided to post an AS3 solution here:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/Hard to tell from your description but this might help:
http://dtptools.com/product.asp?id=atid
Bob -
Dynamic Positioning of Objects in a Grid (rows and columns) with AS3 Tutorial
The topic of a dynamic positioning of objects in a right grid (rows and columns) comes up often so I decided to post an AS3 solution here:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/Hard to tell from your description but this might help:
http://dtptools.com/product.asp?id=atid
Bob -
Need to find the dependent object details for an object.
Hi,
Is there any query to find the dependent object details for any object. Like if mview is built on a table, then i should be able to find the table name with out checking code of the mview. Thanks in-advance for your support. similar way for view and functions or procedures etc...
Regards
DBA.Hi all,
Thanks a lot for your inputs. seems i have not given full details in my post. I need to have a SQL Query to find the dependent object details not DDL.
if i give a metriealized view name, i should get the base table names directly not DDLs...
if i give index name i should get its corresponding table name(off course i got this already)...
if i give a function name, i should get all the tables which are being in the function...etc...
i am looking for a script which will cover all the aspects.....i hope i have given now enough information for this....
Regards
DBA. -
Oracle Access Manager Configuration : Cannot find the Person Object Class
Hi,
I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
1) I have installed OID. I am using one OID for both config and user data.
2) I have installed Identity server and have modified the OID schema automically during installation.
3) I have installed web pass.
I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
Here i gone to Identity System Console to configure Identity server.
Following are the config data i have given
Configuration DN : dc=mydomain,dc=com
Search Base : dc=mydomain,dc=com
Host : mypc.mydomain.com
Port Number : 389
Root DN : cn=orcladmin
Root Password : *******
Directory Server Security Mode : Open
Is the Configuration data stored in this directory also : Yes
Person Object Class : inetorgperson
Auto configure objectclass : yes
Group Object Class : groupOfUniqueNames
Auto configure objectclass : yes
After this I have clicked on the restart server button.
It comes back to the page asking to enter Person Object class details.
I Get the Error : Cannot find the Person Object Class.
I have checked the object class in OID it is there, I have verified the connection details are also correct.
Any Ideas what might be wrong.
Earlier during setup i had to modify the OID schema, how do i check if this has been done.
Any Ideas<?xml version="1.0" encoding="utf-8"?>
<ValNameList
xmlns="http://www.oblix.com"
ListName="setup.xml">
<NameValPair
ParamName="mainOIS"
Value="true"></NameValPair>
<NameValPair
ParamName="currentStep"
Value="LDAP_CONFIG_CHANGES"></NameValPair>
<NameValPair
ParamName="status"
Value="incomplete"></NameValPair>
<NameValPair
ParamName="whichDB"
Value="OID"></NameValPair>
<NameValPair
ParamName="dataDirCopied"
Value="TRUE"></NameValPair>
<NameValPair
ParamName="machineNo"
Value="localhost"></NameValPair>
<NameValPair
ParamName="portNo"
Value="389"></NameValPair>
<NameValPair
ParamName="rootDN"
Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="ldapRootPasswd"
Value="**************"></NameValPair>
<NameValPair
ParamName="securityMode"
Value="Open"></NameValPair>
<NameValPair
ParamName="oblixUserDataSame"
Value="Yes"></NameValPair>
<NameValPair
ParamName="searchBase"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="configDN"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="obClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="defaultConfigForPersonOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obClassGroup"
Value="groupOfUniqueNames"></NameValPair>
<NameValPair
ParamName="defaultConfigForGroupOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obOldClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="obOldClassGroup"
Value="groupOfUniqueNames"></NameValPair>
</ValNameList> -
Finding an EJB object. Web clients vs. Java clients
From what I've read this is the process for a web client to find an EJB object: the client uses JDNI to find a reference to the EJBHome interface and then it uses the create method from this interface which makes the container to begin to work, creating an instance of the implementation class and an instance of the EJBObject interface, and returning a reference to the EJBObject, which will be used by the client to call the methods.
Are there any differences if the client is a java application and not a web client?The Java Client talk to the server with random ports
not 80. Gives me a headache. _*why?
There's no need to get headaches about it, in fact no need to worry about it at all.
Just have the JNDI services available so you can do the lookup (which might require opening a port (or more than one) on the firewall, but that's it.
And that's no different between a standalone client and a web application client. Both need to do that JNDI lookup. -
Unable to find abstract layer object definition
Hi,
I am using SoapUI 3.6.1.
When I send a request "getAttribute" along with all the optional parameters, specifying the Username and password in the Request Properties window, I am getting following error.
<ns1:VdxServiceException xmlns="http://www.novell.com/vdx/service" xmlns:ns1="http://www.novell.com/vdx/service">
<reason>Unable to find abstract layer object definition for the specified definition key.</reason>
</ns1:VdxServiceException>
<stackTrace xsi:type="xsd:string">com.novell.srvprv.impl.vdata .soap.ws.impl.VdxServiceException
at com.novell.srvprv.impl.vdata.soap.ws.impl.VdxServe rHelper.convertToVdxServiceException(VdxServerHelp er.java:90)
In case of "getAttributes" request, an error is thrown.
<html><head><title>JBoss Web/2.1.3.GA - Error report</title><style><!--H1 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:22px;} H2 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:16px;} H3 {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;font-size:14px;} BODY {font-family:Tahoma,Arial,sans-serif;color:black;background-color:white;} B {font-family:Tahoma,Arial,sans-serif;color:white;background-color:#525D76;} P {font-family:Tahoma,Arial,sans-serif;background:white;color:black;font-size:12px;}A {color : black;}A.name {color : black;}HR {color : #525D76;}--></style> </head><body><h1>HTTP Status 401 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>This request requires HTTP authentication ().</u></p><HR size="1" noshade="noshade"><h3>JBoss Web/2.1.3.GA</h3></body></html>
Please suggest steps how can one get attributes of a user using SoapUI.Sorry, I can't help you.
It's been too long since I have used SoapUI.
What is "getAttribute"?
It is not a SOAP request.
I also do know what "www.novell.com/vdx/service" is.
Preston
>>> On Friday, October 11, 2013 at 12:16 AM,
Nikender<[email protected]> wrote:
> Hi,
>
> I am using SoapUI 3.6.1.
>
> ‑ When I send a request "getAttribute" along with all the optional
> parameters, specifying the Username and password in the Request
> Properties window, I am getting following error.
>
> * <ns1:VdxServiceException xmlns="http://www.novell.com/vdx/service"
> xmlns:ns1="http://www.novell.com/vdx/service">
> <reason>Unable to find abstract layer object definition
> for the specified definition key.</reason>
> </ns1:VdxServiceException>
> <stackTrace
> xsi:type="xsd:string">com.novell.srvprv.impl.vdata .soap.ws.impl.VdxServic
> eException
> at
> com.novell.srvprv.impl.vdata.soap.ws.impl.VdxServe rHelper.convertToVdxSe
> rviceException(VdxServerHelper.java:90)*
>
> 2
> ‑ In case of "getAttributes" request, an error is thrown.
>
> <HTML><HEAD><TITLE>JBOSS WEB/2.1.3.GA ‑ ERROR
> REPORT</TITLE><STYLE><!‑‑H1
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:22PX;}
> H2
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:16PX;}
> H3
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:14PX;}
> BODY
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:BLA CK;BACKGROUND‑COLOR:WHIT
E;}
> B
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;}
> P
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;BACKGROUN D:WHITE;COLOR:BLACK;FONT
SIZE
> :12PX;}A
> {COLOR : BLACK;}A.NAME {COLOR : BLACK;}HR {COLOR :
#525D76;}‑‑></STYLE>
> </HEAD><BODY><H1>HTTP STATUS 401 ‑ </H1><HR SIZE=\"1\"
> NOSHADE=\"NOSHADE\"><P><B>TYPE</B> STATUS REPORT</P><P><B>MESSAGE</B>
> <U></U></P><P><B>DESCRIPTION</B> <U>THIS REQUEST REQUIRES HTTP
> AUTHENTICATION ().</U></P><HR SIZE=\"1\" NOSHADE=\"NOSHADE\"><H3>JBOSS
> WEB/2.1.3.GA</H3></BODY></HTML>
>
> Please suggest steps how can one get attributes of a user using SoapUI. -
(JS) Find Page of Object
While preparing a presentation I'm going to be giving in a couple of months, I took a good hard look at my findPage(theObj) function and I think that this is as good as it gets:
function findPage(theObj) {
if (theObj.hasOwnProperty("baseline")) {
theObj = theObj.parentTextFrames[0];
while (theObj != null && theObj.constructor != Page) {
var whatIsIt = theObj.constructor;
switch (whatIsIt) {
case null : return null;
case Character : theObj = theObj.parentTextFrames[0]; break;
case Cell : theObj = theObj.insertionPoints[0].parentTextFrames[0]; break;
case Application : return null;
if (theObj == null) return null;
theObj = theObj.parent;
return theObj
} // end findPage
The previous versions posted in various threads here reflected various degrees of needless caution about what might happen, for example if the object were anchored to text in a cell in an overset table. The above returns null in that case with no need for try/catch.
Notice the use of objects rather than their names. Works! This is similar to the instanceof construction but it's easier to test the negative.
If anyone can knock a hole in the above script, I'd be very interested in hearing about it.
Dave[email protected] wrote:
> Thanks Harbs, interesting points.
>
> 1. I've resisted the use of while(theObj) because it just feels unnatural from a readability point of view. It might be worth setting up a timing test to compare the speed of it with while(theObj != null).
>
>
I find (theObj) more readable, but that's probably because I have a
funny way of thinking, and don't like reading anything extra... ;)
I remember the first time I saw Kris use "0" instead of false and "1"
instead of true, it looked so odd to me, but I've gotten so used to the
short-hand way of writing everything that the long-hand way looks clumsy!
My point here was that "theObj.constructor != Page" was not necessary.
> Your idea of moving the catch for Page into the switch is interesting. That would actually make it impossible to drop out the bottom of the while loop.
>
>
Exactly. Here's (approximately) what I meant: (It should work in CS3 and
later -- in CS2 and earlier, storyOffset was a number and not a
character) Also, Notes can have a lot of nesting, and this will not
catch that...
function FindWhere(theObj,where) {
var err;
if(where==undefined){where=Page}
if (theObj.hasOwnProperty("baseline")) {
try{theObj = theObj.parentTextFrames[0];}
catch(err){}
while (theObj != undefined) {
var whatIsIt = theObj.constructor;
switch (whatIsIt) {
case where : return theObj;
case Note:
case Footnote: theObj = theObj.storyOffset;break;
case Character : theObj = theObj.parentTextFrames[0]; break;
case Cell : theObj =
theObj.insertionPoints[0].parentTextFrames[0]; break;
case Application : return null;
if (theObj == undefined) return null;
theObj = theObj.parent;
return null;
> 2. A test for null catches undefined values. I've always used that test, so I'm going to stay with it. Again, the form if(!theObj) strikes me as something I'd have to pause and think about for a moment each time I read it, so I tend not to use that construction.
>
>
Yes, I know "==null" works. My point was that if you want the
readability factor, "==undefined" is more correct -- the text frame is
undefined and not null. To illustrate this point theObj === undefined
will return true, while theObj===null returns false.
> 3 & 4. Aha, I never thought about footnote references and notes. They hardly ever come up in my scripts so I hadn't had the need to think about them.
>
> 5. "infinitely"?
>
>
Okay. "Infinitely" might be a bit of an exaggeration, but I do use
"FindWhere" on a lot of different levels. For example, it's very useful
for finding if an object is on a MasterSpread.
> At one point, my version of this function did indeed return the last text frame of a story if the object were in overset text, but I ended up realizing that this was rarely useful and indeed misleading. But it is an option that is occasionally needed.
>
>
I find it very useful indeed. I have a separate function to verify
oversets if necessary.
> Thanks for the feedback.
>
> Dave
>
Harbs
http://www.in-tools.com -
"System: Unable to find the specified object" on N...
When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
I'm sure these 2 issues are related but I'm not sure.
Please, can someone tell me how to fix this.
Thanks.Hi
I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx -
How can I find services for object for PM Notification
Hi all
How can I find services for object(attached files ) for PM Notification ?
I can see then,for examle ,using transaction Iw22 :System---->Services for object
My requirement are : 1. open attached file of selected notification for display ( if exists one)
2. If user wants to attach file as service of object
what function exists for it ?
Please your helpHi SD,
I have checked in SUIM and SU24 also. But I didn't find. Could you please tell me any other way to finding out the authorization objects.
Thanks,
bsv.
Maybe you are looking for
-
Why is the Adobe Application Manager in a language other than English?
I'm not sure if I accidently chose the wrong option when setting up my account, but the Adobe Application Manager seems to have all the text (other than product names) in what I think is German, not English. Is there a way to fix that for future down
-
Safari crashes every time I attempt to attach a file to an email through gmail.
I am trying to send some emails for school and need to be able to attach files and pictures. Every time I try to attach something to an email, Safari immediately crashes. This is the report: Process: WebProcess [567] Path: /System/
-
In Photoshop Elements 7, how do I free up the ends of a crop box independently?
In Photoshop Elements 7, how do I free up the ends of a crop box independently? I require the end points to move independently to fit am image crop
-
Can you password protect an pdf Portfolio? Not a single pdf, but a pdf Portfolio.
I know how to password protect individual PDF's. My quesiton is can one password protect an entire pdf Portfolio after assembling the Portfolio.
-
Hello! i installed my router yesterday and its been online the past 24 hours. havnt had any real problems apart from my online gaming still.. but looking at my router i noticed this: Is my error count bad for past 24 hours? VPI/VCI 0/38 Type PPPoA Mo