Find problems in understanding a tutorial relating to IDOC

Please check the link
http://idocs.de/www5/books/IDocBook/cook_A5.pdf
In page no: 32 (Topic: 8.5 Assigning a processing function ) ,FM is assigned directly to Message type and Idoc type combination.
But in the next page, Process code is created for that FM and Asigned that process code to message type and Idoc type combination.
What's the differece.
Another thing is in which transaction we assign Process codes to Message type and Idoc type Combinations
Above tutorial looks like old version. In my system Transactions are looking different ,than they are in Tutorial. I am working in version 5.0. If possible, Please provide me perfect material.

Similar Messages

How do I revert back to iOS 8.2? It's not my job to troubleshoot all the issues. I'm tired of finding problems.

How do I revert back to iOS 8.2? It's not my job to troubleshoot all the issues. I'm tired of finding problems.

creativelauren wrote:
I have the same problem trying to restore a backup from a previous IOS. Is there anyway of doing this and then upgrading to IOS 8.3 once you have done the restore?
You do not have the same problem. It is always possible to restore a backup made with a previous OS to the most recent OS. If you are having a problem restoring a backup from an older version the problem is not related to the fact that you have 8.3 on your device.

Problem with Business Process tutorial

I'm trying to run the Business Process Tutorial (http://e-docs.bea.com/workshop/docs81/doc/en/integration/tutorial/tutWLIProcessCreateApp.html?skipReload=true#1025634)
in WebLogic Workshop 8.1 (Build 2003.0710.190003) and I'm having trouble with
the part that says:
In the New Application dialog box, select Tutorial in the left pane, and select
Tutorial: Process Application in the right pane.
In my setup, the New Application window has only "All" in the left pane. And it
doesn't have anything "Tutorial" related in the right pane.
Any suggestions?
Thanks
-TAB

"Todd Bradfute" <[email protected]> wrote:
>
I'm trying to run the Business Process Tutorial (http://e-docs.bea.com/workshop/docs81/doc/en/integration/tutorial/tutWLIProcessCreateApp.html?skipReload=true#1025634)
in WebLogic Workshop 8.1 (Build 2003.0710.190003) and I'm having trouble
with
the part that says:
In the New Application dialog box, select Tutorial in the left pane,
and select
Tutorial: Process Application in the right pane.
In my setup, the New Application window has only "All" in the left pane.
And it
doesn't have anything "Tutorial" related in the right pane.
Any suggestions?
Thanks
-TAB
Hi TAB--
When you installed the platform, did you install the whole thing, or just part
of it? If you chose not to install the examples, or if you chose not to install
Integration, that would explain this behavior. If not, we'll try to go from there...
Thanks,
Mike

I plugged in a USB drive, tried to open Finder, got the message Finder.app can't be opened - 10810, went into terminal.app, messed up, now terminal screen blank. how do i regain terminal in order to fix finder problem?

With my iMac running, I plugged in a USB drive. When I clicked on finder, I got the message Finder.app can't be opened - 10810. I removed the USB drive. I messed up while in Terminal.app trying to fix Finder problem. Now my terminal screen is blank, just the cursor, but no action after typing a command & clicking enter. Help!

I finally figured out a way to Restart (normal way wasn't working...) & that Restart DID FIX both the Terminal problem AND the Finder problem. So easy, yet so elusive. Thanks so much.

Finder problem with 10.4.6

I installed the update today and now my iMac, which I love and has NEVER had a problem has a Finder problem.
When I scroll through files in a Finder window the file names will get "all bunched up" for lack of a better description.
The names of the files will seem to stack on top of each other and it looks messy and it's driving me nuts. Anyone else see this?
Thanks.
Paul

Gotta love that Dictionary!"I haven't updated yet but it's been reported by everyone."Actually, it's mentioned in the second bullet from the top of Article 303411: About the Mac OS X 10.4.6 Update (delta) and Article 303410: About the Mac OS X 10.4.6 Update (combo) — which I'd read before proceeding. But if they explained why, I missed it. Perhaps so a software engineer can bemusedly observe how many enthusiastic Mac folk would spin on the top of a pin? (Just in case someon'e revising the articles as I write... Thanks, AppleCare!)
Unfortunately, the Apple Installer's abbreviated "Important Information" screen doesn't mention it — so folks who didn't check the KnowledgeBase were caught unaware.
"Maybe it reset your pram?"MJ, have another cup of coffee... I think I muttered the same hypothesis above in saying, " Gotta wonder if it 'zapped PRAM' for me. And what a pleasure to no longer see the faux permissions!...
I guess devious minds think alike...
Cheerfully,
Dean
Did I really just suggest that a New Yorker have another cup o' Joe? Shame on me.
Is that "GRACILE" as in Burns & Allen?
Did I edit this message? I forget; too much coffee, I guess...

Adobe Acrobat Reader via OLE, Problems to understand...

Hi,
i have a little problem to understand how the OLE API works...
Here is what I mean:
1. Load a Document (No view)
2. Findo out the page size
3. Close the document
I can start via:
$OLE$AcroExch.Document.11
But i did not become an object to load the document...
What is the right way for that?
The API reference is not a help for me on this point...
Best Regards
Bernd

Here is an easy? Problem?
What is wrong?
The problem is: "Acrobat.AcroAVDocClass..."
I will only open a PDF File in C#...
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
using Acrobat;
namespace WpfApplication1
    public partial class MainWindow : Window
        public String pdfFile;
        public MainWindow()
            InitializeComponent();
            MyPDF();
        public void MyPDF()
            pdfFile = "c:/MyPDF.DFF";
            Acrobat.AcroAVDocClass _acroDoc = new Acrobat.AcroAVDocClass();
            Acrobat.AcroApp _myAdobe = new Acrobat.AcroApp();
            Acrobat.AcroPDDoc _pdDoc = null;
            _acroDoc.Open(pdfFile);
            _pdDoc = (Acrobat.AcroPDDoc)(_acroDoc.GetPDDoc());
            _acroDoc.SetViewMode(2);
            _myAdobe.Show();

Finder problem or LaCie HD problem

How do I tell whether my external HD (LaCie d2 quadra) used for TM failed or if the trouble is with my Mac (Finder)?
Today I had trouble saving a pages document. The Finder showed the spinning beach ball When I typed the 1st few letter of the destination folder. I checked Activity Monitor & it showed “Finder not responding.” I force quit the finder & discovered I could not restart since no menu bar. I could not access the application folder & I also did not know any keyboard shortcut to bring up terminal so I could not use
“sudo shutdown -r now” or “sudo shutdown -h now”
I gave up & Manually shut down with the On/Off button.
I probably should NOT have force quit Finder! I should have just restarted.
When I booted up again everything worked OK except the LaCie HD icon was missing from the desktop & the TM would not work (since there was no mounted volume for TM). I repaired permissions, I restarted, I shut off & turned on the LaCie HD --no joy.
I am not certain but, suspect that the Finder problem CAUSED the LaCie/unable to mount problem. I just don’t check constantly to verify that the LaCie volume remains mounted. It may have preceded the Finder problem but if so, not by more than a few hours.
The LaCie HD is connected by FW800. I tried to use FW 400 cable & USB cable & same result. The LaCie power light goes on but I don’t hear the HD noises. I don’t know but suspect that the HD must 1st mount before it makes HD noises.
The LaCie is only 16 months old & under warranty. I hate to send it in especially if it is fine & my Mac is the problem.
Under Disk Utility the LaCie is not shown. Under System Profiler/Firewire it shows up as “Unknown Device.”
Is there a way (log?) to find out When the last TM backup completed? Is there a definitive test to tell if It is the Mac software, The Mac Hardware - (doubtful unless FW 800, 400 & USB ports all failed ) , or the LaCie that is the problem?
Thanks,
Steve

Thanks for the replies.
Pullman,
I looked in Console & did find a backup failed but I had been getting occasional TM backup failed messages for months & usually if I manually backup or just wait , the next one works.
I think that is a TM problem as I checked the forums When it 1st happened.
I did not save the Pages document to LaCie. LaCie is used only for automatic TM backups.
I bought LaCie 11-2007 & used exclusively for TM since. I don’t recall anything about “Mac OS Extended Journaled or GUID partition” but, I followed instructions & it went smoothly & has worked very well so I really doubt I set it up incorrectly.
Thomas, Can you point me to any documentation or even anecdotes about the failure of an external drive causing Finder problems? How can I take your very good suggestion to repair the external (LaCie) disk when Under Disk Utility the LaCie is not shown. Under System Profiler/Firewire it shows up as “Unknown Device.”
When you discuss erasing the drive, you are talking about erasing the External drive, right? But if it is not mounting how can I do anything with it? When you say “If the external disk is connected, turned on and not showing up in Disk Utility, then you've got something more serious going on, probably a hardware failure.” You are referring to a failure of the LaCie hardware not the Mac, right?
Update/ more symptoms:
Keyboard shortcut to switch Spaces stopped working. So did mouse buttons for Expose & Dashboard.. So did Hot corners. Repaired Permissions, no help. Trashed Finder plist, no help. Tried to restart & could not. Had to open Terminal & use “sudo shutdown -r now” & Then it restarted with everything working fine except still no LaCie External TM HD mounting.
Something is wrong with my Mac. Probably the LaCie is just fine.
I will use disk Utility to Repair disk with Leopard DVD.

Always finding problem "server not find in safari"

Always finding problem "server not find in safari" for any redirection or even opening some sites through google.. Hv to delete cookies an still some times work some times no..pls do not give me ******** answer like apple for restarting wifi..its a serious issue and i think millions of users are finding this problem.. Apple should be forced to fix this issue through an update..or should come out with a or react solution..

It is not a broad issue, I have absolutely no problems using Safari and ios7.1 on many ipads.
Verify that you have good DNS entries, that can be a major cause of this type of message.

Problems while doing following Tutorial

Hello all,
I have problems while completing following tutorial:
http://www.oracle.com/technology/obe/obe9051jdev/ToplinktoDatabinding/toplinktodatabinding.htm
Everything is fine until I reach the step to create the databinding.
After I drag and dropped the table to the databinding field, I get following warning:
Warning, no session.xml
A session.xml, that can be created from New Gallery, was not detected fpr the TopLink project associated with the selected class. In order tu use the TopLink Client/Server erchitecture, you must define a session.xml containing a Server Session for the associated TopLink project. If uou continue without creating a session.xml, this data control will not have the benefit of a Server Session shared across the given application (recommended TopLink architecture for ...
Is it necessary to have such a session.xml?
And after I finished the tutorial, I don't get any data, in every case, wether with or without a session.xml.
It would be nice, if anyone could give me a answer. Thanks a lot.

Problem solved:
created a session.xml and everything worked fine.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.

miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot

I want to put a number in a cell and tell it to times by 2 and get the result as a total further along. Sorry couldn't find the answer in any tutorial.

I want to put a number in a cell and tell it to times by 2 to give the result i another cell? Sorry couldn't find the answer in any tutorial.

Hi Caakie,
Sounds like tou need some basic information.
The best advice I can give someone new to Numbers (and to spreadsheets in general) is to download and read at least the first four chapters of the Numbers '09 User Guide. You'll find a download link in the Help menu in Numbers '09.
When you want to start using more complicated formulas, you'll also need the iWork Formulas and Functions User Guide, available from the same menu.
Regarding your question: "Can you just give me the string for B which is just add and C which is *2."
What is to be added in "B"? What is to be multiplied by 2 in "C"?
=2+3 will return the result 5.
=A+B will return the sum of the numbers in column A and column B in the same row as the cell containing the formula. If either A or B contains a non-numerical value, the formula will return an error message.
=3*2 will return the result 6.
=A*B will return the product of the numbers in column A and column B in the same row as the cell containing the formula. If either A or B contains a non-numerical value, the formula will return an error message.
Regards,
Barry

Hi.. i am finding problem in transferring .avi file from dektop to itunes

hi.. i am finding problem in transferring .avi file from dektop to itunes

iTunes does not support .AVI files. However, you can use iSquint to convert the file to an Apple-Friendly format (Its free, and really easy to use) http://isquint.en.softonic.com/mac

How to find the Standard Program associated with a Standard IDOC

Hi,
I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

Hi,
For outbound IDoc the program can be found:
1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
For Inbound IDoc the program can be found:
Via WE42 where inbound process and its related inbound function module is maintained.
In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
For extending IDoc look at the following links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
It can be summarized as follows:
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
Hope this helps.
Regards,
Gajendra.

How to find out error segments in a group of Idocs

Hi,
1. For every 5 minutes Idocs are coming in to R3 from some third party systems, and this scenerio some of the Idocs are in failed status as well.
My doubt is how to see the all segments at a time, since there might be some problem with the data, so I need to check the each and every segment all time. Is there any way to findout all segments at a time for the group of the idocs of the same message type.
2. How to find out the error in segments of the idoc.
Many thanks in advance.
Thanks.
Ahmed.

Hi Mujeeb Ahmed
I dont have SAP System in front. Any way check the menu bar, there you can fine SEGMENT WITH ERROR OPTION
Regards
Kumar

File to IDOC:how do i relate inbound idoc with generated idoc in the R/3

hi experts;
can any body tell me how can i relate the IDOC number genrated in the PI with the generated IDoc number in the SAP R/3 system for file to IDOC scenario?
in SAP PI for tcade idx5, idoc no is:12002
but in SAP R/3 in tcode WE05, idoc no is:846915
how can i know a particular message (in SAP PI) created a particular idoc in the backend SAP R/3 System.
thanks in advance,
kumar

Hi Kumar
at the time of testing you have to note down a time at what ur file got picked up ok
then go to we05
-> give the date on CREATED ON field.
-> then in BASIC TYPE field select your particular IDOC CREMAS05 or whatever, see the TIME field that you have noted down at the time of testing, if that is matching means that is ur latest IDOC you have tested.
-> one more thing, tha last IDOC showing in the list means that is your latest IDOC you have tested.
Hope i have helped you, points plz
Warm Regards
Dheeraj Kumar

Find problems in understanding a tutorial relating to IDOC

Similar Messages

Maybe you are looking for