Find program that activate DataSource

Hi,
i have change something in Z data source how i find the program that activate it?
Regards

Hi
Just Got ot T code se11 or se 14
Just paste your Z datasource name here, you will find a screen where you can find your extractor name and structure. Just double click on it , it will take you to the screen where all the FM and Program used by this datasource..
If Helpful Reward
Regards
Hari

Similar Messages

Find program that run transction

Hi,
i have transaction CNE1 how i now which program its activate.
Regards

Hi,
You can find the program name from the status bar of the SAP GUI.
Click on the arrow button which is displayed at system name. It will display the program name.
Regards,
Siva.

Seems like everyday I find another program that worked on SnowLeopard, but now doesn't work on Lion. Can I easily downgrade back to Snow Leopard?

Since I installed Lion, I keep finding programs that won't run, but which ran fine on Snow Leopard. (Apple even eliminated MacSolitare.) How can I downgrade back to Snow Leopard? Do I have to erase my HD and start all over?
I have my stuff backed up on Time Machine and Carbonite.
But do those backups just contain files? Will I have to also reinstall every application that I have been using?

Dorsey Hudson wrote:
(Apple even eliminated MacSolitare.)
No they didn't, since it's not part of the OS.
How can I downgrade back to Snow Leopard? Do I have to erase my HD and start all over?
Yes.
But do those backups just contain files? Will I have to also reinstall every application that I have been using?
If you have a pre-Lion backup, simply restore that backup.

HT5910 Help me find a program that will allow me to tag files with color over file name and not just a small dot that is not easy to see.

Need help to find program that allows me to relabel files with a bold color that is easy to recognize and not just a small nearly invisible dot at the end of the line.

That's one of the many features in the feature-packed "Finder Sustitiute" file brower program, Path Finder, by CocoaTech . It's extremely powerful, with enhanced searching, file list filtering, and batch file operations. It also has an amazing preview mode for most all file types.

Batch program to replicate DataSources in process chains

Hi everybody,
I am looking for a batch program to replicate DataSoruces in a BW 3.5 system. I would like to use this program at the beginning of process chains, in order to avoid any potential problems from transports into productive environment.
I found the following program already but it seems not to work: RSAOS_METADATA_UPLOAD_BATCH
thanks in advance for any help
Ulrich

Hi John
thanks for the hint. Of course you are right. I would expect to have also a transport in BW. It happend unfortunately several times, that not only the involved DataSource got inactivated in our complex data model, but also other ones.
That's why I look simply for the program that replicates DataSources. I tried already with tracing in via SM30 - unfortunately no useful results
regards,
Ulrich

I have photoshop CS5 Extended problem comes when I try to install it as I cannot seem to find an unzip program that will do it

I have photoshop CS5 Extended but my motherboard flashed over so I have now purchased a new computer and of course wish to download another copy, I have my Serial No from my account and I have downloaded a new copy of the program, the problem comes when I try to install it as I cannot seem to find an unzip program that will do it as they are asking for file names etc which of course I don't have until I unpack it !! can anybody please advise what program will unzip this automatically bearing in mind there are two files with the download. Or is there a way that I can download without having to unzip?
Thanking you for your help.

download both the exe and 7z, put both in the same directory and click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I need help finding a workable web program that is not CSS based. I tried IWeb and it just won't work for me. Way too limiting. I've been using a 12 year old copy of Macromedia Dreamweaver, but the new Dreamweaver is CSS

Been building web pages for nearly 20 years, starting with GoLive. Went to Dreamweaver about 12 years ago, the Macromedia version. Tried going to iWeb when it came with a new Mac, but found it way too limiting with it's CSS template base.   Unknowlingly, I then bought a new copy of Dreamweaver.   Ooops, Adobe had bought Macromedia and Dreamweaver, too, is now CSS based, which for my money makes it useless to anyone who likes simplicity.   Now I find that even iWeb has been discontinued. I was told yesterday that Apple doesn't have a web program any more.   At 12 years old, I just don't think it's practical to try to load my old Macromedia Dreamweaver into the new Mountain Lion (I'm getting a new Mac), though it is running, barely, in Snow Leopard.
I need to find a web builder program that will permit simple construction of educational pages, nothing fancy, nothing artistic, just create a page, give it a color, type or drag in text, insert a table, insert pix in the table blocks, add text under the pix... done!    I should note that I am not looking to build traffic. I teach simple things for free and people who want to learn those things (antique sewing machine repair, quilting, building longbows) find me.
I've downloaded trial versions of half a dozen or so programs and looked at maybe 20 more, but all are either CSS based and drive me insane with requirments for constantly making rules and template models, and/or require that you base your web presence in their server.   Also, many will not work with pages built in other programs. I maintian a volume of over 1000 web pages, many requiring regular updating, and they have been with the same server for more than 15 years. I'm not about to change.
So, anybody know a simple, old fashioned web builder that's happpy on a Mac platform?
Captain Dick

Although not supported anymore, iWeb does still function using Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html
... and you can purchase it from Amazon.
Start with a blank page using the Black or WHite template.
All modern websites use CSS and there are thousands of free templates to be had if you want to use a code entry style application. You will need to go this route if you want to create a site that is viewable on mobile devices although you can create an iPhone version using iWeb...
http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html
Search this forum for numerous topics about iWeb alternatives.

I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?

I have an idea for an iPhone app that I believe would be marketable. However, I have no talent towards writing software. How does I find a reputable programer that would be will to develop and split proceeds?

Find an app you like. Contact the developer of that app and see if they are interested.

Trying to find a Program that locates and updates your songs and albums??

Does any1 know of a program that Finds and Updates Information about Your songs and Albums. These are the Songs and albums that have already been on my PC and not have been purchased on Itunes

In the detailed help for the event structure there is a link to caveats and recommendations for using event structures. It is a good starting point.
It is courteous to let the Forum know when your questions are related to a school assignment or homework. We are glad to help you learn LabVIEW, but do not do your homework for you.
You have learned the major disadvantage of the sequence structure: It must run to completion before anything else can happen.
If you are building a state machine (typically a while loop with shift registers enclosing a case structure with one case per state) and having trouble with timing, then think about your requirements. Apparently you have some time delays, but under certain conditions you must terminate a delay/wait and do something else. One way of doing this is to have a Wait state. The wait state has a short delay, determined by the minimum time you can delay responding to a changed condition, and a check to see if the required elapsed time has occurred. If the time has not elapsed, the next state is the Wait state again. The state machine can repeat any state as often as necessary. So a 15 second delay could be implemented by going to a Wait state with a one second wait 15 times. Any error or new command will see a response in no more than one second.
Lynn

Why can't the finder in Mountain Lion 10.8.2 find files that have successfully downloaded, or that other programs can find?

Why can't the finder in Mountain Lion 10.8.2 find files that have successfully downloaded, or that other programs can find?
This happens with maybe 1 out of 5 files. These are files that have either an ."aa" extention, or or are libraries that icloud can see, but finder can't.

Files beginning with a period are invisible and library files are system files. Spotlight cannot find either unless configured to do so (btw, this is not a Finder issue but a Spotlight issue.)
Get Spotlight to search system files (and more)
Enter the search term in the Finder window's search field.
Click the [+] button in the search bar to add a search option.
In the first drop down menu choose Other.
Choose “System Files” from the list that pops up (and check the box to place in drop down menu to avoid this step later,) click on the OK button.
Now back in the Finder choose Include from the second drop down menu.

Thank you for your service. I was most disappointed to find, however, that the letters I really wanted (Adobe Garamond Alternate Caps) is not in this collection and indeed, one now has to use another fancy designing program to construct those letters. I

Thank you for your service.
I was most disappointed to find, however, that the letters I really wanted (Adobe Garamond Alternate Caps) is not in this collection and indeed, one now has to use another fancy designing program to construct those letters. I can’t afford to buy Photoshop just to construct two special capital letters. I’ve used the B and M in my logo for Balquhidder Music for years - but from jpgs - and I was hoping to have more flexibility in the future. I spent $169 to make sure I am in compliance. But I didn’t get anything of use to me.
I can’t understand why those Alternate Caps are not part of this - or any other package. I thought Adobe was capable of amazing things.
I assume I am whistling in the dark. So have a nice day.

Actually, when Adobe moved from Type 1 fonts to OpenType CFF fonts, all the so-called “expert typefaces” were consolidated into the base fonts. In other words Adobe Garamond Pro Regular not only has the Western Latin characters of the original Type 1 version of Adobe Garamond, but also has alternate Latin capitals (with titling, titling floating accents, and stylistic alternates), alternate Latin lowercase (swash and superiors), Latin small capitals (alphabetic and floating accents), ligatures, multiple numeric forms (including lining tabular, lining proportional, oldstyle tabular, oldstyle proportional, superscripts, scientific inferior, numerator, denominator forms, fractions, mathematical operators, etc.) plus a raft of other special symbols.
OpenType fonts are Unicode-based and allow for more than the 256 characters in Type 1 fonts which required multiple typefaces all with mappings to a standard keyboard to accommodate all these glyphs.
Thus, hopefully your disappointment will turn to joy.
To assist you in understanding OpenType fonts and to show you what is in the current Adobe Garamond fonts, I have attached a few PDF files for your perusal.
Let us know if you have any questions.
- Dov

Hello, I trying to create a program that would run a household furnace. I can't find a way to set timers for the ignitor,flame sensor and blowers. Any thoughts.

Hello, I'm trying to create a program that would run a household furnace. I can't find a way to set timers foe the ignitor,flame sensor and blowers. Any thoughts would be greatly appreciated. Thanks, primetime

In the detailed help for the event structure there is a link to caveats and recommendations for using event structures. It is a good starting point.
It is courteous to let the Forum know when your questions are related to a school assignment or homework. We are glad to help you learn LabVIEW, but do not do your homework for you.
You have learned the major disadvantage of the sequence structure: It must run to completion before anything else can happen.
If you are building a state machine (typically a while loop with shift registers enclosing a case structure with one case per state) and having trouble with timing, then think about your requirements. Apparently you have some time delays, but under certain conditions you must terminate a delay/wait and do something else. One way of doing this is to have a Wait state. The wait state has a short delay, determined by the minimum time you can delay responding to a changed condition, and a check to see if the required elapsed time has occurred. If the time has not elapsed, the next state is the Wait state again. The state machine can repeat any state as often as necessary. So a 15 second delay could be implemented by going to a Wait state with a one second wait 15 times. Any error or new command will see a response in no more than one second.
Lynn

Were do I find a program that stiches my stills to an animation ?

Just in a loop , not interactive . I have a serie of stills but need a program that creates more frames so that the animation runs smoother.

If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

How to find the Program that triggered the outbound idoc

Hi,
I need to find the program that triggers a particular Outbound IDoc.
I have the IDoc number/segment/message type.
We need to Debug the Outbound IDoc but we do not know from where the IDoc got triggered.
Is there a way we can find which program triggered it?
Thanks!

Hi Suresh,
Go to tcode WE20, select ur partner profile type, which configured in output type for EDI documents.
On right side, double click on the Message type in outbound parameters.
go to message control Tab, double click on process code variable to see FM triggers for the IDOC.
same as for Inbound also.
Regards
Syed A

I am trying to find a photo shop program that allows cropping by hand so I can crop a head and put in another of my pictures

i used to make greeting cards by cropping faces and putting them on funny pictures that i would download from the web. i recently purchased a macpro and was disspointed to learn that i cannot cut out a face by hand on iphoto. Do you know of any ..other program that I can use with my macpro to accomplish this. Thank you in advance for any help you can give to me.

Go to Picture editor, edit pictures | Adobe Photoshop Elements 12 and click on this video tutorial:
You can download a demo version of PSE 12 here: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe
OT

Find program that activate DataSource

Similar Messages

Maybe you are looking for