Find relevant message in SXMB_MONI for a specific IDoc
Hi,
I have an IDoc sent from XI to ECC. I need to look at the payload in XI. I was told there was a way to find out which entry in SXMB_MONI is for the IDoc, but cannot remember.
Does anybody know how to do it.
Hi,
use we02 to see the Idoc using IDoc number.Also if you know the pipeline ID or PID you can use SXMB_MONI ->Archived XML Messages (Search using ID)
Also check BD20 and BD87.
Regards
Aashish Sinha
PS : reward points if helpful
Edited by: Aashish Sinha on Jan 3, 2008 12:21 PM
Similar Messages
-
No messages in SXMB_MONI for outbound proxy interface
Dear All,
i am executing Proxy-PI-File interface and I am not able to find any message in SXMB_MONI in the ECC side.
I have done all the required proxy configurations and also the ABAP report calling the proxy is working fine but still not able to view data.
Please guide where i am missing.
Warm Regards,
Nishant Jain1. Debugg your report which is sending data to Proxy. Make sure data is present in the internal table.
2. Proxy configuration is client specific so make sure the client from where you are running the report has been cofigured for proxy. Check SLDAPICUST & SXMB_ADM settings once again. -
I can not find the messages in sxmb_moni in http to rfc scenarion
hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
can anyone help meHi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish -
Printing out message history log for a specific co...
I'm using Skype for Windows v 6.1.0.129 on a W7 PC.
Is there a way within Skype itself to:
Printout a message history log for a specific contact?
If there is, what is the navigational steps to accomplish this task.
If not, what is the best 'work around'.
Thxs!I have the same problem as I needed the log for my Fiancee Visa application.
I have just found this software that collates the skype logs.
I then highlighted the names and dates that I wanted and saved and printed it out.
http://www.nirsoft.net/utils/skype_log_view.html
Hope it helps. -
No messages in SXMB_MONI for ABAP Synch Sender proxy
Hi,
I am doing a Scenario which involves ABAP Synchronous sender Proxy and Webservice at the receiver end. On triggering the outbound proxy from a report, i can see no messages in SXMB_MONI of the ECC system neither can i see any message in PI(SXMB_MONI). But on triggering the same after deleting the Receiver Determination in PI Configuration, SXMB_MONI promptly logs the message with error
"No receiver could be determined" both in ECC and PI, since there is no receiver determination.
Note:I am not getting any System fault or Application fault in Sender report neither any response message.
There is no problem with the Proxy settings since other proxy scenarios are working fine with same ECC system but those are Asynchronous proxy calls.
Any Clue about this?
Regards
AmithHI,
YOur answer is near to my problem . Can i ask you more detailed.
I am not getting messages in SXMB_ADM. So i configured in Integration server in ECC & XI system.
IN ECC , i am using two clients, dev & testing - so in which client i have to do configuration ? and What is the role of the business system in ECC ( Integration Server or Application server )???
IN XI, i am using only one client 100...so i have done. here i have given Role of business system - HUB Integration Server.and corresponding destination http://host:port/sap/xi/engine?type=entry
And while creating business systems in SLD...
for XDC...i have given path http://host:port/sap/xi/engine?type=entry
for EDCClient105...how can i create for proxy ...Adaper XI? is it type -
WEB AS ABAP?
pls reply for my mesaages? -
Need to store the synchronous messages in SXMB_MONI for 7 days
Hi Experts,
We have a business requirement where we need to store the sychronous messages in SXMB_MONI
Regards
HemanthHi Hemanth,
If you check the below threads/links pointed by the SCN members and me you need to do two things mainly:
- Set up the sync monitorization. (It looks right with the information that you have pointed).
- Programming the archive/deletion messages. This depends about your PI version and about if you want to archive/delete the messages in the ABAP or in the Java stack. Check this documents/blogs/threads:
Archiving & Deletion of messages in PI - Part 1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?quicklink=index&…
Archiving of messages in PI 7.3 (Dual stack)
Regards. -
How to find out which batch job generated a specific idoc?
Dear Colleagues
Is it possible to find out which batch job generated a given idoc?You need to check in the program about the naming conventions for the job. Then based on it you will be able to identify the correct one.
Thanks
Nabheet -
No message in sxmb_moni for idoc to file
Hi all,
In the idoc to file scenario i want to store the file on the XI server.i have done all the settings.When i trigger the program an idoc gets generated and it is posted to the port(XI port in my case)I get a green status(we02 status 03)but when i monitor my messages i am unable to see it in sxmb_moni.need help.
Regards,
Shrita.Hi Shrita,
Take a look at these links..
Messages stuck with a "Green Flag" status in SXMB_MONI !!
Missing Messages - in RWB but not sxmb_moni
No Messages in integration server
cheers,
Prashanth
P.S : Please mark helpful answers -
Locate an entry in SXMB_MONI for a particular value(IDoc numbe) in payload
Hi,
We have an R/3 XI Third party scenario. R/3 is sending tones of IDocs. In some cases some IDcos are not going beyond XI. In BD64 we get a status code 40(from XI).
We would like to locate the entry in SXMB_MONI for one particular IDoc. The only way now is to manually open all entries for the service/interface combination and see the IDoc number which is becoming very painful.
Since we are in testing phase, there are a lot of entries for the sender/receiver interface combination. We tried to narrow down the result in SXMB_MONI with all possible search criteria like service, interface, etc. Time is ruled out because, we have queues with a lot of messages and never know when a particular message is processed by XI (so the time of sending from R/3 may not make sense in SXMB_MONI as a search criteria).
So my question is: it there a way to find an entry in SXMB_MONI for a particular IDoc number (which is present in the payload) ?
As a programmer, I could think about a program which does this ?! But dont know in which tables the entries are saved or the relation between the tables ?!
Can someone please throw some light on it ?
Thanks in advance
Cheers
danus
nullThere is a way actually.
Idoc Tracking is available from Sp18 ( I think ).
http://help.sap.com/saphelp_nw04/helpdata/en/c1/bab13bb3acd607e10000000a11402f/content.htm
Look into Idoc Tracking in this link.
Regards
Bhavesh -
How to block the status mail for an inbound Idoc to a specific user
Hi,
I have to stop sending the error status mail to a specific user depenidng on Partner Type. This will trigger when an inbound Idoc contains status error(message type INVOIC &ORDRSP).This user needs other mails which are getting triggered with the same Idoc for the same partner. Basically, the requirement is to block only the status mail for that user. The statndard task for this is TS70008125 and it uses the agent determination rule 30000001 (Idoc Administrator).in WE46, this task is assigned to process code EDIR. I have copied the task to a custom task and changed the agent determination rule. I would like to know how will I configure this task so that this custom task will trigger for the status error, without altering other workflows for the same message type & the partner type. Or is there any other way to block the mail?
Thanks,
SantoshHi,
I have done the required coding to exclude the specific agent from the rule,copied the task and its ready. My question is how do I map this custom task to a particular partner type, for the message type INVOIC in WE20? (The message type used for the inbound Idoc is INVOIC). I checked the Partner profile in WE20. Most of the process code is using function module as the processing type.
Thanks,
Santosh -
Query on IDOC Ack (STATUS) config in XI for a specific partner comm.
Hi Experts,
Is it possible to configure the IDOC Ack (STATUS.SYSTAT01 message) in XI for a specific partner communication? We want to configure our system like ALEAUD but the message type should be STATUS.SYSTAT01 and the acknowledgment should be send to sender system for a specific partner only if XI receives any IDOC like (Orders) from that specific partner. For other partners (same sender system) we donu2019t want this acknowledgment settings and configuration. If possible please provide the configuration filters steps etc. Thanks for your valuable inputs in advance.
Thanks,
Satish
Edited by: Satish Jaiswal on Jan 8, 2009 2:55 AMHi Husain,
I have the document you have mentioned. Please note my requirement is to filter the Ack while creating and sending to R/3 based on Partner and Message type. The document provides info only on Message type filter but not parner specific for same sender system!!! Any help appreciated. Also note: BPM and Alert is out of scope.
Looking for some ALE configuration tricks to achieve this.
Thanks
satish
Edited by: Satish Jaiswal on Jan 9, 2009 2:40 AM -
Revision: 12944
Revision: 12944
Author: [email protected]
Date: 2009-12-14 21:36:44 -0800 (Mon, 14 Dec 2009)
Log Message:
Added support for state specific sccessible names in ToggleButtonAccImpl
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ToggleButtonAccImpl.asSorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
CSS part:
nav p {
font-size: 90%;
color: #FFC;
text-align: right;
font-weight: bold;
background-color: #090;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-top-width: 2px;
border-top-style: solid;
border-top-color: #060;
HTML part: (bold italic is the part I added)
<body>
<div class="container">
<div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
<p>Home | About Us | Contact Us</p>
</nav>
<div class="sidebar1">
<ul class="nav">
<li><a href="#">Green News</a></li>
<li><a href="#">Green Products</a></li>
<li><a href="#">Green Events</a></li>
<li><a href="#">Green Travel</a></li>
<li><a href="#">Green Tips</a></li>
</ul> -
Finding Text Messages in My Folders
This is strange! I have transferred a load of text messages to My Folders (I have a Nokia E50). I can see them there on my phone. But when I try to access these messages using PC Suite or anything else, I cannot see "My Folders" anywhere! And I cannot find my messages!
Thanks for your reply, Peter. I have probably 50 subject folders for my emails so I can refer to them more easily. Some are business, some are for a community collaborative I chair and other activities, like Therapy Dogs.
If I'm collecting opinions on an idea, they all go in one folder and are easy to refer to and tabulate. I've been doing this for the 24 years I've been using email! It's become a habit . . . and I do refer to the emails a lot!
Barbara -
Searching Message ID in XI using the IDOC number produced in S1P
Hi Everyone,
I'm a sap XI newbee and i have a question.
The scenario is like this, We have a message ID (PO) that passes thru XI from a 3PLP(3rd party system) which eventually produces an IDOC when it reaches S1P(R/3).
Message flow: 3PLP - XI - S1P.
So in S1P(R/3)'s perspective, the IDOC is INBOUND and its supposed to display the message ID from XI in the DETAILS TAB (tCode:WE02) unfortunately it did not.
So how would I be able to find the message ID in XI using the IDOC produced in S1P.
I hope you get my point.
PS: tcode IDX5 wont work since the IDOC was only produced as soon as it reaches S1P(R/3).
Thank you so much,
XI MonitorYou have to search for the IDOC from IDX5 in your XI system...
Also please check the following OSS note : Note 1083694 - IDoc adapter: IDX5 and IDoc tracking
No object relationship is written in step 2.
No object relationship is displayed in the IDoc monitor (transaction WE02) in the receiver system.
Note that object relationships are written for logical systems only (partner type = "LS").
For more information, see Note 428344.
In transaction WENOLINKS, check whether the administrator has deactivated the object relationships.
If everything is maintained, you should see the Sender idoc number(PI) in BD87...
One of the roundabout ways till you fix the issues is to get the timestamp when IDOC was created and go to SXMB_MONI or IDX5 in PI for that timestamp to get the message id -
Currently, I must browse through 50 or so bookmarked pages to see if a specific topic is covered. I would like to be able to search all bookmarked pages at once for a specific keyword. For example, if I have 50 news sites bookmarked and I would like to see which pages have the word "tuna" in them, I would need to open each page individually and do a "find". If I could search all of those pages at once, then I would save an immense amount of time. I have looked on the add-ons and found nothing...
1. Create a smart album and in the drop down in the top right corner select file status
2. Check mark the file status box and select 'Offline'
Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
To reconnect..
1. Select the missing files.
2. Go to File and scroll to Manage Referenced Files
The dialog box will have one of the photos selected
3. Select the drive and folder that contains the referenced file and select it
4. Click 'Reconnect All'
This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
Narvon
Message was edited by: Narvon
Maybe you are looking for
-
im using the 3ware 8506-4LP with 4 WD 250 GB Caviar Drives(7200rpm).. What would be the ideal stripe size for : -reiserfs -reiser 4 -xfs does the file system make a difference? whats the best stripe fo rlinux in general..everyday desktop use.. my opt
-
Exclamation mark and the message "itunes could not find your song file
Hi everyone. I've tried doing a search but couldn't find this exact problem. I hope i'm not about to annoy everyone with a question that has been asked a thousand times before. my problem is that every now A/some song file(s).that are already in my i
-
Windows access to mac encrypted images?
I know that truecrpyt is a cross platform solution for creating encrypted volumes. Is there ANY way that I would be able to access encrypted volumes or ANY volumes for that matter that I created on a mac using windows? any tricks or third party softw
-
Please see Troubleshooting Info below.
-
My screen won't rotate with the phone
I'd like to know why my screen does not rotate with my phone. And how do I fix that.