Find Reserved Stock

Hi,
I want to know where can I find the reserved Stock , either from the Table or from any F/M.
When you go to MMBE transaction give material number , Batch and Plant you will get the stock in different categories like Stock in QA , Unrestricted Etc there you can find Reserved Stock .
If you go to MCHB Table you will get these Values but not the reserved Stock value.
Can any one help on this as where can i find the reserved Stock , is there any F/M or Table where I can find this.
Regards,
Kris.

Hi Venkat,
look for.
MARD-LABST
If u r looking for unrestricted stock in use ..
check field LABST in MARD table .
also check the other stock fields as well.
regards,
Vijay.

Similar Messages

Which table to find reserved stock (mmbe)?

In the transaction mmbe I can see reserved stock is stored in
RMMMBESTN_DATEN
BDMNG
but thats only a structure, where to find the real data?
that I can say
select bdmeng from xy where matnr = xy.
chris

Hi,
You probably mean RKPF - that is the reservation header data and RESB where the lines\ items are.
A select with matnr will be from RESB.
Best Regards,
Nir

Reservation Stock In MMBE

Hi friends,
I would like to know the table in which the reservation stock has been stored.Iv checked in mard marc mbew but it does not update the quantity of reservation
I also checked in rseb table but the quantity does not match with MMBE report.Please let me know on this.

hii,
reservation stock check it out in the material mangement (MM) transaction,check tables in se11 from MB21 TO MB25,where u find the reqirement.
regards,
sumanth reddy.

Difference in Reserved stock

Dear all,
I am trying to get a standard report which shows stock reservation per material code. I am looking at two transactions - MMBE and MB25. Both these transactions are showing different quantities of reserved stock.
Does anyone know why there is a difference of value in both the reports? Is there any other report which shows the same information.
Thanks for your help.
Best Regards
Keyur

Dear Shah,
Just click on the value which you see in MMBE under reservation and in the top menu click on Environment--->Reservations or
click on the value and press Shift+F6.
Here you can find the clear picture of the reservations.
Check with this and revert back.
Regards
Mangalraj.S

Stock reservation against Sales order and deivery against reserved stock

Hi SAP Gurus,
e We are trying to provide a solution for thscenario where user wants to reserve stock immediatey after SO creation...and deliver same reserved stock.
i am recommanding Reservation where reservation will be created with 231 immediately after SO creation but the rea problem is that how to create SO delivery against that reservation/Reserved stock so that document flow remains intact for the SO.
Thank you very much in advance,
Regards,
Dharmesh.

Hi Lakshmipathi,
I had the same question and search landed to this thread but I ask again with the different perspective
The reservation concept is really an MM functionality but you really dont reserve stock against any order or delivery (other than using special stock movement types like 412E) but unless you create a delivery immediately (and include deliveries as requirements in case of ATP check) you have no real way of establishing the hard reservation. If you do a non-order reservation i.e. you reserve something in anticipation then reservation needs to be used as a receipt in ATP check for both sales order and delivery.
Alternatively what you can do at most is to conserve the pegging relationship (fixed pegging) that has been established once the order is confirmed (with or without ATP check) but this can get really tricky when you have batch determination to be done is delivery in which case you find that there aren't enough batch stocks conforming to customer specifc SLED to pick. So both ATP check and pegging looses its purpose of hard reservation. So that leaves us with having to determine batches too at sales order creation and let pegging not change.
Is this is a good idea in general.. 1) in Make to stock segment, 2) In make to order segment..
Does the concept of resevation stocks at sales order creation does more harm than good ? in general.. Implication in planning. inventory build up .MRP. Another issue is how long should you reserve stocks against order or against specific customer or country and such.
Regards
Loknath

Reserved Stock information in MB52

Hello All,
Is it possible to have "Reserved Stock" information in MB52.
In MB52 Layouts / Line 1 - There is no "Reserved Stock" field available.
Can we bring this information to the layout? (like in MMBE).
Thanks in advance,
Siva

Hi,
Why SAP must have not provided this information in MB52?
This question is difficult to answer for us...sometimes SAP AG creates its software in a way that is not logical to all of us.
However, if you check "Plant stock" view in material master, you can see that "Reserved" is not mentioned. You can't find "On-order" stock also.
The explanation might be that these are not real stock types as someone already mentioned. If you start MMBE and umark checkbox "Also Select Stock Commitments" you won't get these data.
So, these are not real stock types, these pieces of information derive from transactional data (e.g. reservations, open PO).
So, it seems MMBE provides more than a normal stock report, it gives a little bit outlook to planning situation (e.g. scheduled for delivery, Consignment ordered are also not stock types but origin from transactional data).
Regards,
Csaba
Edited by: Csaba Szommer on Jan 16, 2009 11:18 AM
Edited by: Csaba Szommer on Jan 16, 2009 11:19 AM

How To Find Opening Stock And Value For a Material

Hi Experts,
How To Find Opening Stock And Value For a Material in Given Dates
Moderator Message: Search.
Edited by: kishan P on Sep 15, 2010 4:05 PM

Thanks For Answering.....
But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

Sales Order/Delivery for particular customer From his Reserve stock?

Dear Couleague,
There is one scenario that faulty material from customer Co. get back by
Return Order (RE), Then return Delivery --& post goods receipt, Of the sold material,
Now co. (PP/QM) do rework Process (assemble, dismantle ...... whatever on the basis of return order) & make perfect material ok
Now this stock PP/QM people put under RESERVE STOCK because it belongs to that particular customer
Now I want to deliver that stock to that Particular customer,
1) HOW CAN I DO?
2) HOW CAN I PICK UP THAT ReserveMaterial while doing Sales Order/ delivery?
Even though I maintain copy control from RE to OR & AvailabilityCheck?
Thanks
Suresh

Hi Suresh,
As and when you get a return order for repair, then you do the PGR and place that stock into a different storage location and you get that repaired and when you are doing PGI then fetch the stock from the same storage where you have placed the stock when you did the PGR.
If you are having serial number concept that will help you to give the same piece which you have collected from the customer to return the same piece.
We have implemented the system in the same way in our previous implementation.
Thanks,
Mahesh.

Reserved stock quantity from MB25 t-code in R/3

Hello Guyz
1. I have to extract reserved stock quantity (difference quantity) from t-code MB25 into my Inventory Cube (0IC-C03) in BW.
2. The user has advised me that the movement type is always '301' and the storage loc. is always '9998'. The problem is, in the cube, when I look at that specific movement type and storage location, I still have multiple records divided into 'material doc. numbers'.
3. On the R.3 side, I have the 'Reservation number and its Item' as the key fields.
4. How can I get my partilcuar KF from this t-code in R/3 into my cube in BW?
5. My specific question is: The KF exists at the stor. loc. level.. how can I bring it down further at the material doc number level in the cube?
Regards,
Atul.

Very helpful answer Shalini. Thanks. So, I can enhance this extractor 2LIS_03_UM with these 2 fields. Then based on this, I can extract my 'Reserved Quantity' (KF) into 0IC_C03.
But I notice in R/3 that the 'reservation number and item' are the same for multiple document numbers. ie
Doc No.----> Reservation No--
> Item
100                      ABC                                1
101                      ABC                                1
102                      ABC                                1
103                      ABC                                1
104                      ABC                                1
But in MB25, I have
Reservation No -
> Item----
>Diff. Quantity
       ABC                        1                       5000
How can I extract my KF, if there is a one-many relationship between reservation no and item & material doc number?
Any suggestions.. anyone??

Which table holds the reserved stock

Hi All,
In report - MMBE there are two columns unrestricted stock and reserved stock. Can you kindly share how this reserved stock is calculated which table/field holds the reserved stock. If I run the MMBE report now if it is determining the reserved stock assuming it comes from RESB which holds reservations what field in RESB gives me the reserved stock and how many days or what logic does MMBE use to calculate the reserved stock.
Thanks
Karen

hi KarenFarr .. check out this tables
Table MCHB , MSLB
regards
chinnaiya

How to move CoProduct lying in rcpt reservation stock type to unrestricted

Dear Frndz,
I am having coproduct defined and after doing the goods receipt of the main product , the co-product is found in the rcpt reservation stock type.Why it is so and how to move the stock to unresticted ?....Pls help me with the soln.
Regards,
Srini

Dear,
If you have maintained a material in BOM with negative quantity. Then at the time of creation of Production Order when system creates automatic Reservation, then this material quantity will get displayed under "Rcpt reservation" column in MMBE. Because that much quantity will be received as By-Product via 531 movement.
Please ckeck this link,
[Rcpt Reservation |Rcpt Reservation]
Regards,
R.Brahmankar

Reserved stock table

Hi,
Can you please tell the table and field to display reserved stock against contracts?
Basically, we would enter a contract (VA41) and reserve this stock. (so that call off orders can consume this stock)
What is the table where we can see the reserved stock against that contract?
Is it MARD - LABST?
Thanks in advance.

Hi Kasi,
MARD-LABST is total unrestricted stock,for reserved stock also you can use this .In MMBE you can see the reserved stock by clicking on ths quantity,here it will give you the total idea on stock .for returns u can see the values in RETME (This is merchandise that a customer returns because she is not happy with it.) or VMRET (Quantity returned by the customer in the previous period.)
check these fields as per your requirement.
Thanks
Vinayak
Edited by: vinayak4all on Jul 13, 2011 8:05 AM

Re : Reservation stock in warehouse management

Hi
I am transfering warehouse stock to production; I am using LT01 and LT12 for pick and confirm the material transfer from warehouse to production. after doing confirmation using co15 the bin stock ir removed(LS24). But the reserved stock in MMBE is not removed.
How to remove reserved stock
while not using LT01 and LT12 the werehouse stock is not removed. Bot stock in MMBE is removed.
How to solve this.
Thanks
Anto

Hi,
Reservations which you see in MMBE are created against either a Production Order / Cost Center reservations.
In you case you are transferring the Material from the Warehouse to Production Storage location, Logically if your production order reservation is existing agisnt the Production Storgae location system should remove the reservation on confirmation of the order (with backflush option used ).
I suggest you to run the MRP for the material in MD03 and check as the Goods Issue is completed for the order reservation should be removed.
Hope this will help you.
regards
radhak mk

Restrict Goods Issue for Reserved Stock

Hi Experts,
My requirement is to restrict goods issue of stock qty which is reserved.
For that i have created checking rule and assigned to MIGO_GI because we need to consider only reservation .
Now when i create manual reservation system gives msg as per config.
e.g current unristricted stock is 100 qty
manual reservation created for 10 qty
System gives msg if i issue material more than 90 qty. It is working properly
Now pb is system is not considering reservation created by process order confimation.
I already assing checking rule with Checking grp for availability check and also set properties.
in include dependant reservation i set - x - Include all reservations.
I need to restrict goods issue for reserved stock for reservation created by process order.
Thanks in Advance
Janak

Hi Janak,
When a reservation is created automatically or manual, it will depicts the requirement of the material for the specific department/process. BUt it doesnot restrict or label the material as reserved. This is because the acutal requirement/consumption may vary from the reserved quantity. Also the stock still remains in the un-restricted stock and hence its open to be issued.
Now if you want restrict the stock for automatic reservation, then you can make an enhancement wherein the stock is moved to required stock type. But this will block the stock for the order even if it is not required.
Regards

Sales order price with normal stock as well as Reserve stock

Dear all
i have different situation in stock reserving plz let me know
i am explaining whole scenario plz tell me how to proceed
ex: customer agreed To buy the stock around 500 qnt so i have kept stock reserve on jan 15th 500 qnty ( by using 412 e )
At theat time price is 10 rs per one so totally 500*10=5000
Now after 3 days i mean 18th price increased 15 rs per one
now total price is 500*15=7500
in copy control price type is maintained carry out new pricing
user created one sales order with 1000 qnty
now what he wants system should bring old price for 500 qnty (500*10=5000) And remaining 500 qnty with new price (500*15=7500)
I told as per my knowledge System will bring old price only for reserved stock if you want to apply new price for reserved stock just 411 e return the stock from reservation and now create sales order
i hope this right
But here imp thing is how price is calculated if different type of price is there for same material
i have created one sales order with 1000 qnty ( 500 reserv stock +500 Normal stock ) here how price is calculated i mean schedule lines will be different
bz for 500 one price and remaining 500 another price but in one line
Is it possible to calculate price like this 500*10=5000+(500*15=7500) =12500 rs
is this possible ?
plz let me know this process how to proceed and tell me You have any doubts
thanks a lot

Maintain a condition record for Rs.10/- with a validity date (only as an example) as 1st March'14 to 15th March'14. Another condition record for Rs.15/- with validity date as 16th March'14 to 31st March'14.
Now create a sale order for 500 nos. with one line item and change the pricing date as 15th March'14. Similarly, create another line item for the same material with 500 nos. and here, change the pricing date as 16th March'14 at line item level. By doing so, system would fetch the pricing in billing accordingly.
I told as per my knowledge System will bring old price only for reserved stock if you want to apply new price for reserved stock just 411 e return the stock from reservation and now create sales order
i hope this right
Your understanding is incorrect. System will never validate pricing based on age of the stocked material but based on validity period what you maintain in condition record.
G. Lakshmipathi

Find Reserved Stock

Similar Messages

Maybe you are looking for