Find several lights points in the screen
I've bought a macbook air in 2009. I just use it several times.It keeps power off during the 2010,today I start up it, and find several lights points in the screen. What can I do??
"several lights points"
Are you referring to "dead"pixels?
Similar Messages
-
When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?
No problem.
This is a user forum so you are not addressing Apple. There's nothing to fix, that's how home-sharing works. There would be no way for the ATV to recognize your library and display content if the computer is in sleep mode.
You can always airplay from an IOS device or use icloud if you don't wish to keep the computer on. -
My iPhone 4s is stuck after attempting to download the latest update several hours ago. The screen shows picture to connect charger cord to iTunes however, when i do, iTunes is not detecting the phone when I plug it into my lap top. that has never been a problem before now. please help? I have been with out a phone for hours and I am losing a lot of business.
-
Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank
Do as the image suggests, connect the device to a computer running iTunes.
If it is still not working, try posting in your native language. -
My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??
1. Press the F2 key couple of times.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
After my Macbook goes into sleep mode it sometimes won't wake. The keypad lights up but the screen stays black. This problem has only occured after updating to OSX 10.7.2.
All I can do is switch off and restart. Then any programs I have not 'quit' all open.OK, I have a fix.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps. -
I have a mac book air. I felt down and I have broken the screen: several white lines on the screen. Do you know if I can only change the screen? Is it expensive?
Welcome to Apple Support Communities
Take your MacBook Air to an Apple Store or reseller to have your display replaced. If you want, you can buy the display yourself and install it, but as you can see, that's expensive > http://www.ifixit.com/MacBook-Parts/MacBook-Air-13-Inch-Mid-2012-Display-Assembl y/IF188-083?utm_source=ifixit_guide&utm_medium=guide_intro&utm_content=required_ items&utm_term=macbook_air_13%22_mid_2012 -
I have an HP Photosmart Premium e-All-in-One Printer - C310a . I want to send a fax. I can not find an efax icon on the screen on my printer. How do I send a fax?
This model does not include e-Fax. The product specifications are here: Product Specifications. If you want a model with e-Fax, you should check out the HP Photosmart eStation C510.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - - -
The screen of my imac always goes to the maximum exposure. Then appear the light icon on the screen. After reducing the brightness goes my screen after a few minutes back to the maximum intensity with the brightness icon back on my screen.
Try resetting the SMC and if that doesn't work then reset the PRAM too.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I have a iPhone 5s fell into the water and damaged fingerprint sensor motion and lines of light appeared on the screen, but it still works and did not hurt anything else Can I replace it with a new phone
No. The warranty does not cover damage.
You can only get a replacement if you can talk Apple into selling you and out of warranty replacement.
Allan -
I spilled coffee on my MacBook. I dried it for 24 hours. It turns on, the keyboard lights up but the screen is blank. Any help?
Make an appointment at an Apple store genius bar for a free evaluation.
Ciao. -
My ipad is having something wrong in the screen pixels the screen is having an error it is giving a red and baby blue lights all over the screen (invert colours is turned off)
Try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully. -
Nano crashes after I apply light pressure to the screen
This is an easily repeatable occurance, too. All I have to do is lightly touch the screen (closer to the top of the screen is where it seems to be most sensitive), and my nano immediately crashes. I've looked pretty far and wide on the net and cannot find anyone with this same problem. It's frustrating, since I can't put my ipod in my pocket when I go running anymore. It immediatly shuts off when I take my first step!
Have any of you heard of this problem?
Windows XPI doubt there is anything anyone here can advise except get it serviced, or take it to an Apple store and have them check it out.
-
Light leak on the screen...
I have a week 38 build...got this on 21 September...i noticed recently that i have very slight light leak on top right corner of the screen...very very faint you cant resly tell unless i point somone...i wonder if its a defect...does it even quilify for replacement?
most lcd with backlighting will have the light leak, but not all of them. If you had a monitor, turn off all the light in the dark and see if you have them. My HP 23 inch widescreen HD monitor also has a light leak on all sides when the screen is black and in the dark room but if I am watching a movie or something then I don't even notice the light leak.
Now If you have it set to full brightness you definitely may notice the light leak. While in a low brightness, you won't notice.
Now if you think it's bothering you then it's your decision to replace it or not. -
Turn off Q10 keyboard light but keep the screen on
Is it possible to turn off the Q10 Keyboard lighted keys but still have the screen turned on? I would like to do this.
I'd like to know how I can turn off Q5 keyboard light. It's hurting my eyes esp. in the dark.I'm an user and need help. I browsed the Help and google but I could not find a solution on this. Thanks,Chiang
Maybe you are looking for
-
Adobe Bridge CS6 "The operation could not be completed"
I cannot get Bridge CS6 to run under my Mac account. All other accounts on my MacBook Pro work fine with Bridge. I have re-installed CS6 several times and I have searched the internet for days to find a solution. I can see that this is a common pro
-
Can someone help me it's urgent
Okay I bought an iPhone 6 and suddenly it restarts an gets stuck on the apple logo and the screen turns blue red pink white then it restarts and again same thing happens and it is stuck on a loop what is happening some help me
-
Reader 8.1.2 does not allow reading PDF within Web browser???
Adobe updated my perfectly working reader with version 8.1.2, then I received the following message: "Cannot use Adobe Reader to view PDF in your Web browser. Reader will now exit. Please exit your browser and try again." I un-installed 8.1.2 and cle
-
Two questions for After Effects CS5 Mac
Hello, (new to AE) I am trying to figure out why my "make movie" export is smaller than the composition I created. My comp settings are 1280 x 720 and my compostion window is at 100%. My output settings are also locked at 1280 x 720. However when I
-
Problem with trial CS6 download
I downloaded a trial CS6 software. How do I get it to run?