Find source page for index entries

In ID CS4, I could Alt-Ctrl-click on the page number of an entry in my index and it would take me to the source page. That doesn't seem to work in CS5. Is there a keystroke that will do it, so I can check to be sure my index entries are correct?

[Jongware] wrote:
(Why is it good ol' Framemaker still runs rings around ID, or at least on a few points? Isn't Framemaker on its way out? Will Everything Learned since 1986 be lost?)
FrameMaker is not on its way out!!! Development on FrameMaker "next" is ongoing.
I devised this trick to add a 'continued' line to a table -- it works well if you were planning to have the header repeated anyway:
Insert 2 rows at the top of your table.
Copy the entire header (originally row #1, now the 3rd row) and put it into the 2nd row.
Join the entire length of the first row into one single cell.
Type "Table 124. (continued)" into this cell.
Adjust top/bottom lines where necessary. Take care if you have different widths for the very top/inner line thicknesses -- you'll have to check if the correct widths get applied at the top, and in the repeating header.
Select the top 2 rows and define them as Header Rows
In Table setup, choose to Skip First Occurrence of the header.
It takes some time to set it up, but the advantage is it's totally autonomous -- the table won't care whether it fits onto a single page, or runs to a next one; the header will always be correct.
It's one of those things I might write a script for, some day ...
This is what I may have remembered reading, when I referred to seeing something like my posted solution.
For some reason I can't edit my posting now, so I'll add my corrections here: it's not necessary to insert an anchored frame to hold the cross-reference, as I described. The anchored frame was a leftover from my first experimental solution. Also, it's not necessary to enter the table title in the paragraph that precedes the table, as the source of the cross-reference; with Jongware's method of using the first non-header row that appears at the start of the table when the header row(s) skip the first instance of the table, you can point the cross-reference to that first non-header row.
I'll also add a note to Jongware's method: when using a cross-reference to an auto-numbered table-title paragraph style, rather than entering static text such as "Table 124." as in 4. above, the cross-reference updates if the number changes.
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

  • Infopackage Idocs in status 2 - could not find code page for receiver system

    Hi,
    We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
    We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
    One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
    We did not encounter this issues on our previous migration test runs..
    Hope someone can help
    Christophe

    Hi,
    Thanks for responding. We finally found out what the problem was.
    We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
    Regards
    Christophe

  • IDoc Status 02 ( Could not find code page for receiving system )

    Hi All,
    I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
    Error description.
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed at runtime.
    3. The logon language is not installed in the target system.
    4. In the destination system, no logon language is maintained
    Please help.
    Thanks - Vinay.

    Hi Vinay,
    Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination  is working fine and your able to connect to target system and also check correct port is assigned.
    Regards,
    Vinod.

  • Not able to find driver page for HP 15-r007tx

    Not able to find driver page for HP 15-r007tx.
    The web site is able to detect my product, but when clicked on link Software & Driver Downloads, it says page not found.
    Please help. I am looking drivers for windows 7 ultimate.

    Hi Anoop22Sharma
    Install:
    Intel Chipset Installation
    Intel Video Driver 
    NVIDIA High-Definition (HD) Graphics Driver
    Synaptics Mouse Driver
    Realtek Ethernet Controller Drivers  
    MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
    Ralink Bluetooth Software Driver
    Intel USB 3.0 Driver for Intel 8 and U/Y Series
    Realtek High-Definition (HD) Audio Driver
    Realtek PCIe Media Card Reader Driver
    HP 3D DriveGuard

  • Idoc Error: Could not find code page for receiving system

    hi,
    I am facing the following error while processing Idocs.
    ERROR: Could not find code page for receiving system
    Diagnosis
    For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

    Hi,
    I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
    If this helps you really award me the points.
    ~Katty

  • Idoc failed in Bi system "Could not find code page for receiving system".

    Dear Experts,
    i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
    All the idocs have been successfully posted except one which is giving this error
    Idoc status 02 - could not find code page for receiver system.
    Please guide me
    thanks
    vamsi

    Hello Vamsi,
    check Note 647495 - RFC for Unicode ./. non-Unicode Connections
    If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
    Please check this thread - IDoc error - Could not find code page for receiving system
    Hope it helps,
    Thanks & Regards,
    Amit Barnawal

  • Could not find coding page for receiving system

    Hi,
    We have set up the configuration of RFC connections in SM59. We want to send an IDoc from a Unicode to a non-Unicode system. Message 'Could not find coding page for receiving system' appears. We activated some solutions described in OSS notes and added the required authorization to the communication user but it still doesn't work. What else can cause (solve) this problem?
    Regards, Jan

    Hello Jan,
    I had the following situation:
    After seup of an ALE/IDOC scenario with another SAP but Non unicode system sometimes the outbound PROJECT idocs failed with the error message "Could not find code page for receiving system". Status of Idoc was 02. When reprocessed some minutes later with report RBDAGAIN it worked.
    It turned out that for what'o'ever reason the connectivity was down for a very short time but long enough to get the Idocs failed.
    That's what I meant with the error text could be misleading.
    We solved this problem with a daily job with report RBDAGAIN for reprocessing.
    Regards
    Michael

  • Could not find code page for receiving system

    Hi  Experts,
              When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
    Dave
    "Could not find code page for receiving system"

    Hi Praveen,
    The detailed error msg says the following.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System response
    There are IDocs with incorrect status.
    Procedure
    Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
    Removing errors:
    How you remove the errors depends on the error message you receive.

  • BW Monitor error  Could not find code page for receiving system

    Hi All,
    Frequent BW Monitor error  - Could not find code page for receiving system
    I checked SM59 and every setting is fine there. Any other possibility ?
    Regards
    Srinivas

    The log updated in the status tab was:
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.

  • Error "could not find code page for receiving system"

    Hello Everyone,
    We are trying to load data and receive the message:
    Could not find code page for receiving system
    We have searched notes and this forum and can't find anything.  We also checked WE20 and could not find anything wrong.
    Can someone please elaborate specifically what this error is and where to fix it?
    Thanks so much.
    Colleen

    I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem.  Here is the resolution that is stated in note #613389 (it's not very clear in the note).
    - Language “EN” must be specified in sm59
    - Under Special Options -> RFC Bit Options
    Make sure that “Use Found Communication Code Page” has a check mark.
    Once this was done, the data loads started completing successfully.

  • Need help finding proper page for Extending OA Framework

    I am using OAF 11.5.10 CU2. We have a requirement to modify the table that shows on the OTL timecard notification. This is what shows when u go to the "Worklist Timecard Approval" responsibility and select the notification with type of "OTL Workflows for Employees". The table contains project number, we want to change that to project name. We also need to add a custom comments field.
    When I go thru the "Extending OA Framework Applications" documentation it shows me how to find the page to export from the MDS repository. However, when I do that it doesn't contain the Timecard Entries table as expected. The page I exported was /oracle/apps/fnd/wf/worklist/webui/NotifDetailsPG, as the "About this Page" shows.
    Please help me find the proper xml page to extend for this requirement.

    t looks like it does creates the web bean dynamically. This is the controller code that gets fired when the details button is selected, which is the timecard details.
    if(s9.equals("Detail"))
    oapagecontext.removeSessionValue("TimecardBlockCount");
    oapagecontext.removeSessionValue("TimecardAttributeCount");
    flag = false;
    GlobalUtilities.putSessionValue(oapagecontext, "FOOTER", "detail");
    oapagecontext.putSessionValue("TimecardMode", "TIMECARD-REVIEW");
    oawebbean.addIndexedChild(createWebBean(oapagecontext, oawebbean, "Hxctimecard"));
    So How would I know how to find this web bean to make the changes?

  • Could not find source code for Storefront application of CRS in ATG 10.0.1

    Hi All,
    I am trying to find the source code of Storefront application of CRS in ATG 10.0.1. This is needed to try all the multi-site features in the default website first before doing the same on our application. I want to create a similar setup like MotorpriseJSP application on ATG 10.0.1.
    Let me know if there are any options to get the source code for storefront app.
    Thanks,
    Kishore Kumar.

    Hi
    You can find the source code for the CRS applicaiton under
    ATG10.0.1\CommerceReferenceStore\Store\EStore\src
    Thanks
    GS

  • Can't find source file for newsservice.NewsServiceProxy in JMS Web Service

    i can't find the source file for newsservice.NewsServiceProxy in JMS Web Service. The
    newsservice.NewsServiceProxy is required for client to post news to server and received news from server. But
    i can't find where the file located in the newsservices.jar provided in that tutorial.
    Someone please help me to located it. thank you :)

    Hi,
    You will have to generate this file. The steps to generate this file has been provided in the Install file present under NewsService/doc/Install.html (once newsservice.jar is extracted) - Running the NewsService client application section - Step 1.
    Follow the instructions, and you will be able to download the zip/jar file which contains newsservice.NewsServiceProxy within it.
    Regards
    Elango.

  • Where to find source code for PDK

    for example, source code for AbstractPortalComponent.

    Hi Han,
    To get the source code of the PDK, first download the pdk either from SDN or portal from java developer> PDK download>jar files  and save netweaverlib.zip.
    Unzip it and you will find more jar file.
    Now if you rename the .jar file to .zip and open you will find .class file. Use a decomplier to get the java classes. For abstract portal component rename and unzip prtapi.jar.
    PS: If helpful award points
    --Deepak

  • Help finding help pages for elements 11

    Upon pressing F1 key when in Elements 11 I'm directed to the current help page for the current Elements 13.  Surely Adobe archived the Elements 11 help pages and tutorials somewhere!  Anyone know where they are?

    This should help
    Learn Photoshop Elements 11 | Adobe TV
    And here is PSEv.11 help.pdf from  archival repository
    http://help.adobe.com/archive/en/photoshop-elements/11/photoshop-elements_reference.pdf

Maybe you are looking for

  • Need suggestion whether to use ATM or MPLS in DSL implementation

    Presently i am working in ISP, and we are providing internet access via simple dialup, ISDN and IVS. and now we want to implement DSL i ve talk with few peoples regarding whether to use ATM or MPLS in DSL implementation but because they are solution

  • SPML Client Modify Request

    Hi, I am trying to assign a user in OIM to a Role or group using the spml modify request webservice. I am creating a java procy for this webservice and then trying to invoke the same. I am not sure how to add membership to any role , i am trying with

  • Inserting into MsAccess Database

    Hi, I am having problem with inserting a row into the MsAccess Database. I am getting error like "SQLException: Occurred while performing Database Operations ---> method Main() java.sql.SQLException : [Microsoft][ODBC Microsoft Access 97 Driver] Synt

  • Flash Video Not rending in IE 7 or 8

    I have a website, and on one of my pages, TV commercials, I embedded Flash videos from my YouTube channel. I tested on all browsers, and everything is fine except for Internet Explorer. I get the red X for where the videos are supposed to be. What gi

  • Dealing with number range gaps with grouping?

    What i am trying to do is get a query of data that gives me a start year and end year. I can't use min and max as there could be gaps in the year.. 1999,2000,2002 i am missing 2001 .. so i need 1999/2000 and 2002/2002 here is a bigger example. Table