Find System which are automatically updating by internet

Hi team,
can any one help me on this , In my environment I have around 1000 servers , we are using wuss for windows update
but some server are missing they are updating by internet means automatic update.
can I find the server name which are taking update from internet ,I don't want check manually all the servers.
Regards, Triyambak

Hi Triyambak,
I’m writing to just check in to see if the suggestions were helpful. If
you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support

Similar Messages

System settings are being updated??

I bought an eMac from a friend of my husband's, and there wasn't the Safari icon to connect to the internet. So, I clicked on the apple icon at the top left of the screen, then clicked on Mac OS X, and it would usually open up the internet browser and I could surf the web from there. Well, my husband was messing around with the computer to try and figure things out, and now when I click on that same thing a gray box pops up in the middle of the screen and says that my system settings are being updated and it's unable to open my preferred web browser and I need to try again in a few minutes. This started last night, so it's been well over 24 hours, as we let it set there thinking it just wasn't finished updating. How do I get rid of that?

Hello Mrs. Long,
Did you get the 10.4 Install Discs with it? If so power down, hold mouse button down at power on to open the tray & inset Install Disc, hold Option/alt key at same time to bring up the Startup manager so you can choose the Install Disk to boot from.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

Google "lightroom 5.6" and direct links to both Mac and Windows will be at the top.

Deletion of Request which are not updated to data target

hi,
I want to all PSA data whether it is updated or not In our project this is being done by Using a Process chain, But it is not deleting the request which are not updated to any data target or failed, I have selected both the check boxes
Only successfully booked requests
Only requests with errors, not updated in any data target
but even after selecting this check box it is not deleting the failed request, can any one tell me why it is so.
Any help in this would be highly appreciated.

Try to do it without checking any of the checkboxes...
Regards,
Luis

Where can I find out which areas in London Actuall...

Where can I find out which areas in London Actually have got the Fibre Optics promised last year? I have tried with bt and on the net but cant actually find anything that would tell me where the elusive fibre optics are. I am being asked all the time for a postcode and if I knew that I would be living there.

The problem you're going to have, is not only finding where it's available but also if there are any connections still available in the local cabinet. I'm in London, in a slow-spot (500kpbs) for normal broadband, and when the engineer did my Infinity install last Friday he told me that I got one of the last connections available (they only put in a 100, based apparently on take-up in other areas, never mind that given the speed round here over the copper wire, a lot of people are going to want Infinity...)

I updated operating system to OS X but I have updates for Mountain Lion which are already updated through OS X, can the updates be deleted?

First Timer
I had Mountain Lion prior. I just updated my operating system to OS X (Version 10.9.2) last evening. This morning I have updates for Keynote, Numbers and Pages whick were already updated with new OS X. It is not a huge deal, but I have 3 updates showing in APP Store which will not update because they are associated with the old system. This will bother me. Is there a way to remove the old available updates from App Store without removing the newly updated versions? I am far from a knowledgeable computer person so if there is a solution, could you please respond in simple terms. Thank You.

Do you have a connected external HDD that has the older versions of these apps installed on it?

Import of data source into R/3 systems which are not in transport route

Dear experts,
I generated FI-SL data sources for hierarchies in order to extract a custom R/3 set hierarchy. The object directory entries are fine, the package has the correct assignment of the QA system. Now, I want to import the settings into another R/3 system (not QA): the import finishes without errors but nothing is updated. Does anybody have an idea why? Due to technical reasons, I can't switch the target system manually in the transport request.
Any help appreciated.
Best regards,
D.O.

Hi,
This checkbox is set for those fields of the datasource(in rsa6) which are custom fields,and whose values are determined by a user-exit written in tcode CMOD.
We have observed that keeping this checkbox ticked or unticked does not make any difference at all.So even removing this checkbox for your 4 fields will not solve the mismatch issue.
The mapping for the 4 fields in your case,is already there in BW.
Please go to tcode CMOD,enter the BW project name,select components and click on display.4 user exits will be displayed.
1st is for TD datasources,2nd for master data attr,and next are for text and hierarchies.
Double click on 1st exit FM,then double click on the include program,and find the exit code written for your datasource.Most probably user-exit not working OK.
cheers,
Vishvesh

Find columns which are null

Hello all, I am currently developing a data warehouse that holds time-series values. In the 5-min interval fact table, there is a column for every 5-minute segment of a 12 hour period. So I have a few foreign keys which make up a composite primary key in the fact table, followed by generally-named columns m0,m5,m10...m1145,m1150,m1155 (m0 represents 00:00 [12:00] and m1155 represents 11:55). There is a flag in the row to denote AM or PM. This database collects various metrics from a Coherence environment for a live monitoring solution that also has a Historian to track trends, get a graphical historical overlay against the current values coming into the live environment, etc.
So I have this table with aggregation at a 5 minute level and will need to roll this up to hourly and daily aggregation levels during an ETL process. I'd like to be able to pinpoint which data, if any, has holes in it IE the collectors hiccupped somewhere for whatever reason and did not report a 5 minute segment to me.
Is there anyway to find rows which have null values and to report back which column names contain null values? A use case would be that I have a row in the 5 min fact table that contains a null value for column m455, which means that there is a gap in my time series at the 4:55 hour for that object. During ETL roll ups, I'd like to be able to record which time slot has "holes", or null values in them so that we can pinpoint why they occur to prevent them from occurring again during the development process of this solution.
Thanks for anyone's help!!
Regards,
TimS

TimS wrote:
create table f_metric_5_min (
     metric_key number(10) not null,
     object_key number(19) not null,
     date_key number(5) not null,
     segment_id number(1) not null,
     m0 number(19,4),
     m5 number(19,4),
     m10 number(19,4),
     m15 number(19,4),
     m20 number(19,4),
     m25 number(19,4),
     m30 number(19,4),
     m35 number(19,4),
     m40 number(19,4),
     m45 number(19,4),
     m50 number(19,4),
     m55 number(19,4),
     m100 number(19,4),
     m105 number(19,4),
     m110 number(19,4),
     m115 number(19,4),
     m120 number(19,4),
     m125 number(19,4),
     m130 number(19,4),
     m135 number(19,4),
     m140 number(19,4),
     m145 number(19,4),
     m150 number(19,4),
     m155 number(19,4),
     m200 number(19,4),
     m205 number(19,4),
     m210 number(19,4),
     m215 number(19,4),
     m220 number(19,4),
     m225 number(19,4),
     m230 number(19,4),
     m235 number(19,4),
     m240 number(19,4),
     m245 number(19,4),
     m250 number(19,4),
     m255 number(19,4),
     m300 number(19,4),
     m305 number(19,4),
     m310 number(19,4),
     m315 number(19,4),
     m320 number(19,4),
     m325 number(19,4),
     m330 number(19,4),
     m335 number(19,4),
     m340 number(19,4),
     m345 number(19,4),
     m350 number(19,4),
     m355 number(19,4),
     m400 number(19,4),
     m405 number(19,4),
     m410 number(19,4),
     m415 number(19,4),
     m420 number(19,4),
     m425 number(19,4),
     m430 number(19,4),
     m435 number(19,4),
     m440 number(19,4),
     m445 number(19,4),
     m450 number(19,4),
     m455 number(19,4),
     m500 number(19,4),
     m505 number(19,4),
     m510 number(19,4),
     m515 number(19,4),
     m520 number(19,4),
     m525 number(19,4),
     m530 number(19,4),
     m535 number(19,4),
     m540 number(19,4),
     m545 number(19,4),
     m550 number(19,4),
     m555 number(19,4),
     m600 number(19,4),
     m605 number(19,4),
     m610 number(19,4),
     m615 number(19,4),
     m620 number(19,4),
     m625 number(19,4),
     m630 number(19,4),
     m635 number(19,4),
     m640 number(19,4),
     m645 number(19,4),
     m650 number(19,4),
     m655 number(19,4),
     m700 number(19,4),
     m705 number(19,4),
     m710 number(19,4),
     m715 number(19,4),
     m720 number(19,4),
     m725 number(19,4),
     m730 number(19,4),
     m735 number(19,4),
     m740 number(19,4),
     m745 number(19,4),
     m750 number(19,4),
     m755 number(19,4),
     m800 number(19,4),
     m805 number(19,4),
     m810 number(19,4),
     m815 number(19,4),
     m820 number(19,4),
     m825 number(19,4),
     m830 number(19,4),
     m835 number(19,4),
     m840 number(19,4),
     m845 number(19,4),
     m850 number(19,4),
     m855 number(19,4),
     m900 number(19,4),
     m905 number(19,4),
     m910 number(19,4),
     m915 number(19,4),
     m920 number(19,4),
     m925 number(19,4),
     m930 number(19,4),
     m935 number(19,4),
     m940 number(19,4),
     m945 number(19,4),
     m950 number(19,4),
     m955 number(19,4),
     m1000 number(19,4),
     m1005 number(19,4),
     m1010 number(19,4),
     m1015 number(19,4),
     m1020 number(19,4),
     m1025 number(19,4),
     m1030 number(19,4),
     m1035 number(19,4),
     m1040 number(19,4),
     m1045 number(19,4),
     m1050 number(19,4),
     m1055 number(19,4),
     m1100 number(19,4),
     m1105 number(19,4),
     m1110 number(19,4),
     m1115 number(19,4),
     m1120 number(19,4),
     m1125 number(19,4),
     m1130 number(19,4),
     m1135 number(19,4),
     m1140 number(19,4),
     m1145 number(19,4),
     m1150 number(19,4),
     m1155 number(19,4),
     constraint f_metric_5_min_pk primary key (metric_key, object_key, date_key, segment_id),
     constraint f_metric_5min_fk_metric_key foreign key (metric_key) references d_metric (metric_key),
     constraint f_metric_5min_fk_object_key foreign key (object_key) references d_object (object_key),
     constraint f_metric_5min_fk_date_key foreign key (date_key) references d_date (date_key)
) partition by range(date_key) (
     PARTITION def values less than (2558)
) tablespace FACT;The reason to define separate columns for time intervals is because need to see data coming from Coherence enviroment in 5 minute intervals, creating a row for each 5 min interval for each object (thousands) is too time-consuming. Using MERGE is much faster to update columns in the same row. And secondly, because my job tells me to go with this logical model :).
I can understand the "job-tells-me" reason but not sure am convinced with the "time-consuming" issue,
especially as it is a datawarehouse. But I assume you must have verified the same.:)
The NULL-finding exercise will be done after the data is loaded into the 5 minute metric table and before the hourly roll-up ETL.
Not sure what you mean in what format, I plan to build a list and place them into a form of auditing table within the database that will be queried in the future to determine where the gaps are and for what objects so that we can trace them back to a certain JVM and coherence collector and fix the issue from occuring again; hence the point of a monitoring tool.
Storing time in a table can take up a lot of space and is harder to compute procedurally. In this model the database does not care about the time, only the data; the date and time is not a focal point for this database, the database is abstract, with the Java behind it controlling the purpose of its data. The reporting engine after-the-fact cares about dates and such which can be easily determined by referencing to dimension tables to determine which column represents which time in the 12 hour sequence.
Going back to the "null-finder" do you think there is any way to do this? Thanks for your help!
Regards,
TimSDo you mean that you want to get only those columns where there is a NULL value, for a record-at-a-time ?
In that case, the only option that I can think of is building a Dynamic SQL, based on checking whether each column has a NULL value or not. Although, I hope somebody can come up with a better way to achieve the same.
(Else, your not considering "time-consuming" approach above becomes not much of advantage, isn't it ?) :)
(Of course, only if "null-finding" is a MUST exercise...)

How to find aggregates which are not used.

Hi ,
There are lot of aggregates in my system , so i should deactivate the aggregates which are not used from long back. so how to find out all those , can u plz guide me ,

You can also check the usage column of the aggregates. If usage value is high then the aggregate is used very frequently.
If there is no value at the last used then the aggreagete is not used at all.
Hope it helps
Regards
Sadeesh

Changed articles in one server are automatically updated in other server?

Hi,
i got an issue that when we are changing an article master data in Master Data Server ( where all Master Data is Maintained ) are Automaticlly Updated in Transactional Data server ( where all Transactions are maintained ). For Articles, ARTMAS Message Type is there but it can't used in Chnage Pointer Techinque becuase it's restricted to BAPI by SAP itself.
but my problem is how Changed Article Data is Updated in Remote Server Automatically.
can anyone suggest me how to do this.

Hi Ramana,
You can use RFC function modules to update the data between two independent SAP systems. Generally in practice there are three types of communications possible:
1) tRFC
2) qRFC with outbound queue (Used basically for non-SAP server)
3)qRFC with inbound queue
A sample code is attached
report rstrfct0.
call function u2019RFC_FUNCTIONu2019
destination RFCDEST
in background task
( as separate unit )
exporting ...
tables ...
commit work.

How to find documents which are not linked to a project?

Hi all,
i'm just looking for a variant to search for documents which are not linked to a project within ta SOLAR_EVAL.
I need a way to report how much documents are not linked to a project; just stored in KW.
Can anyone give a hint?
Thanks a lot!
Jan

Hi Jan,
This report SOLMAN_UNUSED_DOCUMENTS will help you identify the documents which are not linked to the project.
(OR) Use Tcode: SI80 to find any document in SAP Solution Manager KW.
Regards,
Sanjai

Yoga 13 -- After automatic update no internet connection

I just got this lenovo yoga 13 ultrabook. I've only had it for about 18 hours and late last evening there were some automatic updates and after that I could no longer connect to the internet
- when I ran the windows network diagnostics it said that I needed to install a driver for you network adapter.
How can I fix this?
Solved!
Go to Solution.

hi clos687,
i'm assuming you've turned on the wireless by pressing f7 button. after that, if you still can't connect, please, check your drivers (d:/drivers or c:/drivers ) folder to re-install the wireless adapter.
hope this helps.

Find activitys which are related to an opportuntiy

Hello Experts
I can related an acctivity with a Opportunity.
I want to select this information from the sysmtem. In which tabels i find the information?
How can i finde the activitys which are related to an opportuntiy?
Regards,
Sven

Hello Vellory,
You can query the table CRMD_LINK for retrieving the follow up document. But, here you will run into a little bit confusion as to select which one.
So, a much better and cleaner approach would be to use the Function Module - CRM_ORDER_READ. Using this FM you can very easily retrieve all the following and preceding documents in the Export Tables Parameter ET_DOC_FLOW. From here you can again call the CRM_ORDER_READ to get the additional details for each one order document.
You can even execute the Report CRM_ORDER_READ in SE38 Tcode to have a feel of the actual FM.
Hope this will help.
Thanks,
Samantak.

How to find reports which are using sales tables

Hi Guys,
we are using OBIEE 10g version.Here i need to identify the the reports which are using sales tables.
Table names are given but how to find which report is using these tables.Is there any method to find
or we have to check all reports manually?
Could any one pls suggest me here!
Regards,
sk
Edited by: 912736 on Jun 8, 2012 1:24 PM

Hi SK,
You can run a report from catalog manager that willl give you all answers requests and the subject area columns in use, you can map these back to the sales tables either manually or by linking (vlookup) to an RPD report that you can run from the Admin tool.
The Usage Tracking method is pretty good but you will have to match up the reports using the Logical SQL.
I'd do both methods and cross ref your results to ensure nothing slips the net.
Regards
Alastair

With version 5.0.1 bookmarks are automatically updated when launching the application, which was not the case in the previous versions. Is it possible to avoid that ?

I prefered the previous versions when the bookmarks did not update automatically when launching Firefox

_VZ_ wrote:
So the question is whether I can somehow coax the linker to give an error
when these symbols are used?I guess you can - with a bit of a hack. You an probably use a map file telling linker to use only version SUNW_1.4.1 (or whatever version your client machines' have). This way you'll get errors about missing definitions up front:
$ cat mapfile
libCstd.so - SUNW_1.1.1 $ADDVERS=SUNW_1.1.1;
$ CC -M mapfile a.cc
Undefined first referenced
symbol in file
std::string::~basic_string() a.o (symbol belongs to unavailable version /export/opt/sunstudio12.1/lib/sparc/libCstd.so (SUNW_1.2))
std::basic_ostream<__type_0,__type_1>&std::operator<<<char,std::char_traits<char>,std::allocator<char> >(std::basic_ostream<__type_0,__type_1>&,const std::basic_string<__type_0,__type_1,__type_2>&) a.o (symbol belongs to unavailable version /opt/sunstudio12.1/lib/sparc/libCstd.so (SUNW_1.2))
void std::string::__unLink() a.o (symbol belongs to unavailable version /opt/sunstudio12.1/lib/sparc/libCstd.so (SUNW_1.2))
ld: fatal: Symbol referencing errors. No output written to a.outSee Linker and Libraries Guide, section "Binding to Additional Version Definitions" (http://docs.sun.com/app/docs/doc/819-0690/chapter5-81344?l=en&a=view) for explanation and an example.

Find System which are automatically updating by internet

Similar Messages

Maybe you are looking for