Find the difference between loading and registering the drivers..

Dear Sir..
Could you please help me to find the difference between two activities..
1.Loading the drivers
2.Registering the drivers
What's the difference between loading and registeing the drivers and what activities take place by the JVM to do it all.

Dear Sir..
Could you please help me to find the difference
between two activities..
1.Loading the drivers
2.Registering the drivers
What's the difference between loading and registeing
the drivers and what activities take place by the JVM
to do it all.You load a class - it isn't specific to a driver.
That is part of java - not JDBC.
Normally JDBC drivers register themselves when the class is loaded. This is specific to the driver and has nothing to do with a user of the driver. It is only a concern to someone who must implement a driver.

Similar Messages

  • Whats the difference between renting and buying the movie in itunes?

    what's the difference if you buy the movie or just rent it from the itunes store?

    Buy: you can watch it as many times as you like; and it stays on your iPad.
    Rent: you can watch it for 24/48 hours only; and it will disappear from your iPad

  • Just purchased an Airport Extreme , what´s the difference between LAN and WAN

    just purchased an Airport Extreme , what´s the difference between LAN and WAN

    Check the Setup Guide for the AirPort Extreme to confirm that the WAN port accepts the signal from your modem or from another router on your network.
    Other Ethernet devices on your network connect to the LAN <-> ports.

  • Difference Between Licensing and Registering

    Hello,
    What is the difference between Licensing and Registering a Product?

    Check your other thread:
    Off-cycle Product
    Re: Off-cycle Product

  • Could any one tell me what is the difference between swfloader and module loader?

    Hi  All,
                          Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

    Hi,
    ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
    What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client.  In other words, the class factory is a singleton for a given url. Unloading is a totally different story.  As you note, not everything is truly unloadable, because there may be lots of references to stuff in
    the module that will keep it alive and un-GC'ed.
    I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
    The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system.  I will assume that you are, because otherwise it would be obvious where to expose methods.  You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.                
                    Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
    Also try and refer to this link which was previously discussed in this forum..
    http://forums.adobe.com/message/74404
    Thanks,
    Bhasker

  • What is the difference between ojvm and client versions?

    Changing the java vm from client to ojvm result in the following error:
    Errormessage:
    java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
    Project Settings -&gt; Configurations -&gt; Development -&gt; Runner -&gt; Virtual Machine -&gt; ojvm FAILS
    Project Settings -&gt; Configurations -&gt; Development -&gt; Runner -&gt; Virtual Machine -&gt; ojvm      RUNS OK.
    Project Settings -&gt; Configurations -&gt; Development -&gt;Paths -&gt;Additional Classpath:
    C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
    What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
    Various version info:
    Output from program:
    java version:1.4.2_01
    java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
    java vm version:9.0.3.738 cdov
    Taken from JDeveloper Help About:
    Oracle IDE     9.0.3.10.35
    UML Modelers Version     9.0.3.9.4
    Business Components Version     9.0.3.10.7
    java.version     1.3.1_02
    java.vm.name     OJVM Client VM
    java.vm.version     9.0.3.738 o

    However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

  • What is the difference between upgradation and migration.

    Hi Guru's
    what is the difference between upgradation and migration.
    actuallly i involved in upgradation project, here my role is
    1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
    2. go to BI .7  find the query;s ,give the query name and save the query ,
    3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
        come to 7.0 check the query in analyzer also.
    i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
    query's already available in 7.0 why are u doing this work?
    can i know the upgrades those  objects, is it neccessary, if necessary how can i upgrade.
    infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
    Points will be Assingned ,
    Thanks & Regards
    prabhavathi

    Hi,
    I was talking in a general sense not on a query level.
    If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
    Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
    Hope this helps.
    Thanks,
    JituK

  • What is the difference  between ws_upload and gui_upload

    what is the difference  between ws_upload and gui_upload
    what is the difference  between ws_download and gui_down load
    pls tell  briefly

    Hi Kuamr,
    UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
    The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
    Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • What's the difference between CoBuilder and other developmen​t tools?

    Is there any more excellent features about CoBuilder?
    or What's the difference between CoBuilder and other development tools?
    I just want to know more about it.
    Thanks!

    One more thing, if you do not have the hard drive icon on the desktop you can get it there by:
    click on the desktop so the menu bar says Finder next to the apple logo, click Finder, then Preferences, General, Show These Items on desktop and check the hard disks:
    That makes life a lot easier when you want to find out information.
    Ralph

  • What's the difference between jsp and jsf?

    who can tell me what's the difference between jsp and jsf?
    I'm puzzled when I found some of the technology in jsp is so similar to the ones in jsp( javaserver page)

    Hi,
    Find the difference between JSP and JSF
    1. A developer has more control with JSP, but (should) get easier development with JSF
    2. Event handling is done differently in JSP (HTTP) and JSF (Java)
    3. The UI is designed differently (or should be at least) with JSP (markup) and JSF (components).
    4. The end product should also be defined differently - JSP page versus a JSF application.
    Is this the only thing that is need to make a decision for either or? Probably not. There are other pieces that need to be taken in account when deciding which technology to use - tools support, enough components, type of application etc.... At this point there are not enough JSF components (although there are some interesting projects underway - Ajaxfaces, Myfaces, ADF Faces, and WebChart 3d) and enterprise tools support is still limited to a few tools vendor. Looking at our ADF Faces components they are currently available as early access (not production) and demands for these components are stacking up, literally, outside my office doorstep. Although I would love to make them production - now! - it is not a viable solution since we are still checking features and fixing critical bugs.
    All this combined - not enough enterprise level components in production, lacking tools support etc... - leave customers in a vacuum where the decision is either to continue with JSP, since it is mature and has a wide developer base, or move forward with JSF not sure if the support, or the developers will be there. This is particularly sensitive to customers that need to get started now and be production by summer.
    If you are in this vacuum here are some key points promoting JSF:
    1. Fundamental unit is the Component
    2. Built in event and state management
    3. Component sets can be provided by any vendor
    4. Closer to ASP.Net or Swing development
    5. Choice of UI technology
    6. Scale up (rich clients)
    7. Scale down (mobile devices)
    8. Built into J2EE containers in J2EE 5.0 (tentative)

  • What's the difference between JRE and HotSpot

    What's the difference between JRE and HotSpot?
    Where can i find HotSpot for Solaris?
    tks!

    The difference between the two is explained at:
    http://www.sun.ca/software/communitysource/hotspot/
    and
    http://www.sun.ca/software/communitysource/hotspot/faq.html
    It's included in the J2SE v1.3.1 release.

  • How to calculate the difference between intdate and getdate

    Hi,
    My requirement is to get the data for all the claims where the difference between transactiondate and getdate() should be less than or equal to 7 which means any claims that happened in the past week.
    So, my query would be something like this
    select * from claims
    where transactiondate-getdate < 8
    But my transactiondate is in int format such as 20150331 and getdate would be in the format of 2015-03-31. Can someone please help me on how can i achieve the difference between these 2 date formats in the where clause.
    Please let me know if you have any questions or if i am unclear.
    Thanks

    Hi SqlDev12,
    Please find the below condition in your query,hope it would help you
    DATEDIFF(DD,CAST(CAST(TransactionDate
    AS
    VARCHAR)
    AS
    DATETIME),GETDATE())
    < 8
    Thanks & Regards,
    Praveena.

  • Can someone explain the difference between TIER_WEB and TIER_WEBDEV

    Hi All,
    We have two sets of values in Context file as below.
    <TIER_ADWEB oa_var="s_isAdWeb">NO</TIER_ADWEB>
    <TIER_ADFORMS oa_var="s_isAdForms">NO</TIER_ADFORMS>
    <TIER_ADFORMSDEV oa_var="s_isAdFormsDev">NO</TIER_ADFORMSDEV>
    <TIER_ADWEBDEV oa_var="s_isAdWebDev">NO</TIER_ADWEBDEV>
    Could you explain the difference between
    TIER_WEB and TIER_WEBDEV
    and
    TIER_ADFORMS and TIER_ADFORMSDEV

    These values in a shared APPL_TOP system. Pl see ML Doc 745580.1 (Apply Patches in a Shared Application Tier File System Environment) for an explanation.Not necessarily in Shared APPL_TOP, even in traditional multi-node installation you will find these values in the application context file.
    I never came across any document which describes the difference between TIER_WEBDEV and TIER_WEB, I just can say that these variables always have the same value.

  • What are the differences between api and sdk

    Hi,
    Could anybody clarify for me what are the difference between API and SDK? I googled for the answer, and couldn't find any thing on this topic.
    Many thanks in advance.
    javasfan

    Is it correct to say that "a SDK includes all the
    APIs"? or "API sits on top of the SDK"?It's a bit weird to say either. First, the JDK doesn't include all APIs. Just the J2SE core API. Others, like 3rd party libraries or J2EE are not included. Second, if you mean the API docs, they're also not included IIRC.
    It'd technically only be correct to say "the SDK provides an API", I guess. The example is very lame, but: if the SDK is a machine, the API is the sum of its buttons and levers and gauges and intakes and outlets and exhausts. The API docs are the manual.

  • What is the difference between "Replace" and "Replace by Security"

    Hi all,
    I am implementing FDM to Load data to HFM, I set them up with a proper security on the shared service and FDM. When I load data to HFM from FDM, there are 4 options to load data. (Replace, Merge, Accumulate, Replace by Security)
    A document states that
    Replace: Clears all account values from the target application, and replaces that the data in the application with the data in the load file.
    Replace by Security: Loads data to the target application only for members to which you have access.
    However, even if I used “Replace”, it worked with security which I set.
    Does anyone know what the difference between “Replace” and “Replace by Security”?
    Is there any way that FDM works without security?
    Thanks in advance
    taku

    The fact both methods are producing the same results will either be coincidence or perhaps because you are mis-interpreting the difference between the 2. When you run a Replace HFM will clear out all data based on the combination of Scenario, Year, Period, Entity and Value dimensions it does not care if you have set up security classes which may restrict access to any of the other dimensions i.e. Account, Custom1 thru 4. When you use Replace By Security HFM will still clear on the original criteria but it will respect security class restrictions set up on the other dimensions e.g. if you are assigned to a security class which is restricted to accessing only a certain subset of accounts, HFM will not clear data fro the accounts you don't have access to when you use Replace By Security

Maybe you are looking for

  • Auto update of Pricelist

    Hello, I have client who needs to update a certain pricelist very frequently, due to frequent changes in the pricelists. Is there a way or mechanism out there to change this price lists automatically  i.e. set a column on the GRPO or something ?

  • ESS Configuration error structure field Roundtrip_Strategy not found

    we have ep7 and ecc6 our HR guyz are getting this issue when trying to create a travel request,its working in back end can any one help..?

  • Table name at run time in Stored procedure

    I have a SQl statement within my stored procedure as : SELECT LastModifiedDate INTO v_Date FROM TABLE1 WHERE ID = v_ID; Can I use a variable vTableName instead of directly putting the value "TABLE1" (that is actual name of the table ). Please excuse

  • Delete a line item according to Mat erial code

    Hi SD experts, I need to write an ABAP program to delete a line item according to some Material codes in a given Quotation(Revised). I want to know what are the undelying fields and tables to be queried for a revised Quotation.  Where do i find a giv

  • Problem when I upload to FTP Host from muse

    I am having a problem when I upload to FTP Host from muse, it stops at a random % of the process without any warnings, I have been posting from the same computer to the same ftp address and never had any problem before, please help me if you can. Tha