Find the Manager for Group

If this isn't a good place to ask this question I applogize in adavance if you could provide a link to the correct area I should ask/post this I would appreciate it. Otherwise...
The end goal is to fill in the Managedby atribute for a lot of secuirty groups with a correct manager. I have a list of a 2100 groups and I have a data share that has like 10 petabytes of data in 3000 different directories, roughly. The point is there is
a lot. At this point I'm just trying to identify who should be the manager for group.
I'm trying to figure out the best way to approach this any and all advice/suggestions is apprecited. Even it is go pound sand, newby...hopefully not but I'll understand if it is :-)
Found
this searching
Thanks in Adavance

Fair enough...Sorry for wasteing your time, but thank you for your help
Thanks in Adavance
You are not wasting anyone's time it is just that there is no way to answer your question.  These decisions are based on your organization.  Scripts cannot decide who manages who.  You need to get with your management and implement an org
chart.  The org chart gets directly tied to groups.  It starts with the org chart.  Each position gets a group and the manager or exec is the owner of the group.
In most companies this may be delegated since so many managers and execs are computer illiterate.  The delegate becomes the group manager and manages resource allocation through group membership.
This is Active Directory deployment 101.  I recommend contacting a certified consultant to help you set this up.  It is fundamental and critical.  I cannot understand how you can have a large AD deployment without having a formal design document. 
It probably exists but those that know it have been let go to save money.  Now you are lost in limbo.
Do more research.  Ask a lot of questions.  Be a detective and see if you can find the original documents.  If you succeed you will be a hero.
¯\_(ツ)_/¯

Similar Messages

  • Find the manager for pirticular emp

    Dear all,
    i know the employee how to find the manager for that pirticular employee what is the navigarion path.
    good answer would appriciated.
    By
    Bose

    Hi,
    IN the transaction PP01 por object type P you have to check the relations A012 and A02.
    Regards,
    Kapil

  • Find the Employees for whom Manager is not available

    Hi
    I wish to find all the Find the Employees for whom Manager is not available?
    Can anyone Pls throw some light how I can?
    Regards,
    Sreeram

    Hi
    Get all the Positions without "A002 - Reports" Relationship from table HRP1001 (excluding A002 from input screen).
    After finding the positions, get ee no.s for those positions from table PA0001.
    Hope this helps.
    Best Regards
    Reddy

  • How to find the profit center group for a profit center?

    How to find the profit center group for a profit center?

    Hi,
    try this also
    In order to pass the setid parameter of the FM, you have to concatenate the following things
    Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
    In my example below, I have declared as constants and concatenating to gv_setid.
    gc_01016 is the set id for profit centers
    gc_kokrs is the controlling area
    gp_pprct is the Profit Center group entered in the selection screen.
    You will get KOKRS value from the cepc-kokrs.
    data :   gc_0106(4)   TYPE c VALUE '0106',
               gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
               gv_setid          LIKE sethier-setid,
               gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
      CONCATENATE gc_0106  gc_kokrs gp_pprct INTO gv_setid.
      CONDENSE gv_setid.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
        EXPORTING
          client                    = sy-mandt
          fieldname                 = 'RPRCTR'
          langu                     = sy-langu
          setid                     = gv_setid
          tabname                   = 'GLPCT'
          no_table_buffering        = 'X'
        TABLES
          set_values                = gt_set_values_1
        EXCEPTIONS
          set_not_found             = 1
          illegal_field_replacement = 2
          illegal_table_replacement = 3
          OTHERS                    = 4.
    By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
    Regards,
    Venkatesh

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • I have adobe digital edition 2.0 and I am trying to authorize my erreader, but I am unable to find the 'manage library' before I open ADE.

    I have adobe digital edition v2.0 and I am trying to authorize my erreader, but I am unable to find the 'manage library' before I open ADE.  Where to I find the 'manage library'? and should I upgrade the ADE to version v1.7.2.?

    To make Mail quit you'll need to perform a forced quit or, failing that, a forced shutdown.
    When an application won't quit you can hold the Command and Option keys together and then type the ESC key. This (usually) brings up a dialog with all the running applications. Select the offending program and click the Force Quit button.
    If this doesn't force the application to quit (quite rare) or if you cannot get the Force Quit Dialog to pop up, hold the power button for about 10 seconds to shut down the entire computer. This should be a last resort but sometimes is necessary.

  • Where can I find the manual for my Mac OS?

    ver. 10.7.3: 2.4 GHz core 2 Duo with 4 GB of DRAM.
    I have three questions:
    1. Where can I find the manual for my machine i.e. hardware manual and or consumer/connaisseur manual?
    2. Does it have a zip media drive? I'm looking at the left side of the machine and I see small square shaped slot for a disk of this sort. I know this is a common type of media storage for cameras and would like to confirm that it is zip.
    3. And while i'm at it, could you remind me of the uses of the two ports advancing towards the back of the computer next to the USB inputs.
    PS: I'm also interested in any technical information concerning Apple hardware and if you could direct me to the appropriate forums I would appreciate it.
    Thank you in advance.
    Sincerely
    Shawn

    I will dubb the theme of this thread: the mass storage data problem and by problem I mean how can we store data in the most cost-efficient and efficacious manor possible if we can classify data storage strategies into two groups respectively: 1) the individual stragegy and 2) the corporate stragegy. The individual, we will say, is rational and seeks to store as much data as possible in the megabyte range, the gigabyte range and the terabyte range. How will he or the corporation, of conglomerate, large, mid-size or start-up size i.e. 2 - 200 people procede. Please feel free to enhance the dialog of this post in the framework of the corporate schema vs. individual and change the estimations, exp: 2 -200, to fit a realistic scenario of what i'm trying to evoke here.
    I'll start of with
    MB range = 4 GB Lexar standard USB bought at Dwain Reed (note: this is just a starting point to provoke dialog and don't intend this as a suggestion)
    GB range = the portable hard drive at the suggestion of Michael Black of NC
    TB range = tape media, at my suggestion that older devices could be used to read the data where an external hard-drive could be used as an intermediary component to transfer data to newer devices, say the portable hard-drive of Mr. Black and an internal-hard drive which is standard in an older machine. We will say that the labor/work required to remove either is irrelevant as our time is assumed to be worthless within reasonable bounds.
    -Shawn

  • Where to find the documentation for technical wage types?

    Gurus,
    I  need help finding the documentation for technical wage types such as /001...
    There are hundreds of them...
    Thanks,

    you can go to the view v_512w_d, choose your country grouping, the list of wagetypes will be displayed.
    there will be a help button available next to the wagetype name.
    you can view documentation either for technical or modal wagetypes.
    Have a good day!

  • Could not find the Manage Accounts option in File = Info Tab in MS Project 2010

    Hi,
    I am using MS Project Professional 2010 first time. I am trying to setup Project Professional 2010 Desktop to connect project server. Somehow I couldn't find the "Manage Accounts" option in File => Info Tab.
    Quick help is required!
    Thanks,
    Prashant

    Julie,
    what did you tell him?  I am having the same issue.  I can only navigate to ALL Programs>Microsoft Office> Microsoft Office 2010 Tools.  There is no Microsoft Project Server 2010 Accounts.
    I know this has been closed for awhile, but I need to fix this ASAP.  I had the "Manage Accounts" while I was on XP, but they upgraded me to Windows 7 and now it is gone.

  • How to find the tcode for the include's in user exit

    Hi
    I wanted to find the tcode for the given include name in the user exit.
    Can you pls help in this regard
    Regards
    Madhan Doraikannan

    Hello Madhan,
    Usually the include in the user exit is part of a function group which directly may not fetch u tcode. So the best option is..
    1. Get the FM name and check the table modsap. This will give u the enhancement name and related information which can help u with the tcode.
    2. to use the where used option which will lead you though multiple program till u reach the main program where u can search for transaction.
    e.g say u r trying to search include ZXM06U41  which exists in the FM EXIT_SAPMM06E_016. Now if u do a where used for this FM it will show program name MM06EF0C_CUSTSCR1_ITEM_SET_D03 if u again go for where used it will show u MM06EF0C. now if u click of the Display object list in the toolbar u will get the list of tcodes also.

  • Where can i find the theory for alv with function modules

    hi
    where can i find the theory for alv with function modules

    Hi,
    Please check this link
    http://sap.niraj.tripod.com/id66.html
    ALV function module
    http://wiki.ittoolbox.com/index.php/How_do_I_insert_a_logo_in_ALV_using_Function_Modules%3F
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/using-function-module-fm-reuse_alv_grid_display-to-display-a-report-in-alv-1472543
    reward if helpful
    raam

  • I have a compaq 6200 pro i can not find the driver for SM bus controller.

    I down graded the 6200 pro with the i3 chip  to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

    Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

  • Where do I find the installer for AAMEE 3.0 for the Creative Cloud?

    I try to setup a local Adobe Update Server. I've seen the video online on Adobe TV, but I don't find the actual installer file called AAMEE 3.0...

    Hi wieneke,
    You can find the installer for AAMEE3.0 at : http://blogs.adobe.com/oobe/2012/05/aamee-3-0-for-cs6-available-now-removes-puffer-fishes. html
    The link is : http://download.macromedia.com/pub/developer/creativesuite/AAMEE/win/ApplicationManagerEnt erprise_3_0_all.exe
    Regards,
    Rave

  • Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

    Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
    This happens each and every time, on different Wifi networks, in different locations.  On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

    Try this DNS server ...
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Quit and relaunch both your browsers to test.
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    And here >  Wi-Fi: How to troubleshoot Wi-Fi connectivity

  • I'm trying to find the download for Adobe Creative Suite that I bought.

    I'm trying to find the download for Adobe Creative Suite that I bought.
    I have it in my order history with the serial clearly displayed, but no download button and it can't be found on the adobe site. I know it's old, but I don't care. I paid for it and I want to use it.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for