Find the path of A/P invoice

I have added approval for A/P invoice.When a new A/P invoice is added it is added in draft mode i.e.the entries are saved in ODRF.When the A/P invoice is approved the status changes.When this A/P invoice is re-opened from approval status report  or Message or Alert Overview,I want to find the DocEntry from ODRF table.

Hello Dillip,
Basically the Draft key is stored in the target table, not in the drafts. I mean: If you issue a AP Invoice from draft, on the opch table the column draftkey will link the AP invoice and draft table.
You can connect the draft and AP Invoice by the following query:
select * from odrf T0 inner join opch T1 on T0.ObjType = T1.ObjType and T0.DocEntry = T1.DraftKey
Regards
J

Similar Messages

  • Inconsisten with the protected source The system cannot find the path specified (0x80070003)

    Hi,
    we are getting an error with the DPM server, the disk is on the same server, other disk have no issues
    The replica of Volume H:\ on backup.domain.eu is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but
    new recovery points cannot be created until the replica is consistent. 
    DPM encountered an error while performing an operation for \\?\Volume{5d0ecad1-5d88-47eb-8a5c-13dddaf0d41e}\app\invoice\ on backup.domain.eu (ID 2033 Details: The system cannot find the path specified (0x80070003))
    we did a consistency check twice and a disk scan, even deleted the backup and recreated it

    Hi,
    From the following article, you can first try a consistent checking:
    Replica inconsistent
    https://technet.microsoft.com/en-us/library/bb809059.aspx
    To perform a consistency check
    In DPM Administrator Console, click Protection on the navigation bar.
    In the Display pane, select the protection group member for which you want to perform a consistency check.
    In the Actions pane, click Perform consistency check.
    In the dialog that notifies you that a consistency check is a lengthy operation, click OK.
    If it failed, please try to manually synchronize a replica as referred in this article:
    How to Synchronize a Replica
    https://technet.microsoft.com/en-us/library/bb795867.aspx
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I find the path (source) of a document in mavericks?

    how do I find the path (source) of a document in mavericks?

    See if you can find the file using this program
    EasyFind – Spotlight Replacement

  • How do I find the path to a TestStand sequence file using LabVIEW

    My LabVIEW application launches a bunch of teststand sequences, provided it has the complete path to each of them. I want to make it more flexible by providing it just the name of the TestStand sequence so that it will go and find the path to the sequence by searching a directory structure. TestStand has a neat FindFile() function that can do this, but I need to do this from within LabVIEW. Is there a way to do it?

    There are a few ways to do this depending on how you are getting the sequence files.  If you are calling the GetSequenceFileEx method, you can just pass the GetSeqFile_FindFile (0x20) flag in the SequenceFileFlags property.  If you are using the ApplicationMgr.OpenSequenceFile method, this is automatically done for you.
    If you want to use the FindFile function in general, you can use the Engine.FindFile method.
    Allen P.
    NI

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

  • When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

    when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
    What can i do or where do i look?

    ELEMENTS 12 AND ELEMENTS 13
    Upgraded to 13 Thinking might resolve the issue.
    Was working fine up until we had "Tech" come in the office and "up grade some stuff"
    then all of a sudden i started getting this message, something happened but i don't have a clue what.

  • "The system cannot find the path specified." error message when trying to start instaling a software

    hi
    when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
    i use the windows 7

    Zohre
    What version of the CAD software are you trying to install?  Is it compatible with win 7?  Older installations (on older OS) installed to a different default location that win 7 does not have.
    Wanikiya and Dyami--Team Zigzag

  • I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

  • "The system cannot find the path specified" error

    Hi, Thanks for taking the time and reading.
    I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
    The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
    I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
    i get an exception. I have tried a few different formats and it spews the same error. 
    Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
    Things i have tried:
      I installed: CRRuntime_64bit_13_0_13
      I installed: CRforVS_13_0_13
      Took a look at the Procmon and i could not find an access denied error
      Event Viewer has no detail.
      Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
    Code:
      if (!Directory.Exists(filePath))
      Directory.CreateDirectory(filePath);
      string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
      cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
      cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
    Error message:
      System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
        at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
        at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
        at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
    System Details:
    Windows 7 Enterprise N  64 bit
    ServicePack 1
    IDE:
    Visual studio 2010 .Net framework 4
    Application is set to run as "Any CPU"
    CrystalReports :
      dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
        C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
        C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
    Thanks for your help

    I don't see where you're ever setting the logons for the tables in the report and subreports.  The reports with saved data are working because they already have data in them.  The reports without saved data are not working because they don't know how to connect to the database.
    See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
    -Dell

  • Function Module to find the Path of the file in the Application Server

    Hi All,
            Any function module available to find the path of the file stored in the application server. Please let me know.
    Thanks.

    Check this code:
      DATA: dl_file TYPE ibipparms-path.    " File name
      CONSTANTS: c_dir       TYPE  rlgrap-filename.
    * F4 filename for Application server
        CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
          EXPORTING
            directory        = c_dir
            filemask         = ' '
          IMPORTING
            serverfile       = dl_file
          EXCEPTIONS
            canceled_by_user = 1
            OTHERS           = 2.
        IF sy-subrc <> 0.
          MESSAGE e000 WITH 'Error while getting the file name'(006).
          EXIT.
        ELSE.
          p_file =  dl_file.
        ENDIF.
    Thanks & Regards,
    Siri.
    Message was edited by:
            Srilatha T

  • Error [0x80070003] The system cannot find the path specified

    We have Windows 2012 Server hosting 2 VMs - Domain Controller & RDS.  We have been doing Windows Server Backup incremental and have an ongoing issue with scheduled backups each night.  The backup shows completed with warnings and generates
    2 log files.
    The first log files shows:  
    Backup of volume \\?\Volume{5d46f853-5db2-11e2-93e7-806e6f6e6963}\ succeeded.
    Backup of volume C: succeeded.
    Backup of volume F: succeeded.
    Application backup
    Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
       Component: ACBCD71E-A8CA-4672-B951-52C1BE8444BE
       Caption     : Backup Using Child Partition Snapshot\FMLRDS1
       Logical Path: 
    Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
       Component: Host Component
       Caption     : Host Component
       Logical Path: 
    The 2nd log file more often than not shows:  
    Backup of volume E: has failed. Backup failed as shadow copy on source volume got deleted. This might caused by high write activity on the volume. Please retry the backup. If the issue persists consider increasing shadow copy storage using 'VSSADMIN Resize
    ShadowStorage' command.
    Error in backup of E:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
    Application backup
    Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
       Component: 2B4A9541-C88B-442E-9A7A-6D8A27342C11
       Caption     : Backup Using Child Partition Snapshot\FMLDC1
       Logical Path: 
       Error           : 8078010D
       Error Message   : Enumeration of the files failed.
       Detailed Error  : 80070003
       Detailed Error Message : (null)
    We had been getting a successful backup once or twice a week which showed completed (with no mentioned of warnings) but now it regularly shows completed with warnings as noted above.  
    We did a manual full backup of the DC to a different external drive a few days ago and that completed without warnings and the backup shows:  E: Completed 63.38 Full - VSS Copy Backup Successful, 8/27/13 3:35 PM - 4:43 PM. Data Transferred 63.38
    On a side note, we can view the logs in the windows/logs/windowsserverbackup directory but when we attempt to view the details of a log file through the Local Backup Console for any log which shows completed with errors, we get a "MMC has detected an
    error in the snapin and will unload and then it shows Object referenced not set to instance of an object."  The manual backup noted above that was successful is able to be viewed through the Local Backup Console without this error.  
    Any idea as to why this is failing during the scheduled backups?  This hosts a database that we need to have regular successful backups.

    Hi,
    First please follow the steps below to re-register dll files. Detailed information could be found here: http://support.microsoft.com/kb/940032:
    1. Click Start, click Run, type cmd, and then click OK. 
    2. Type the following commands at a command prompt. Press ENTER after you type each command. 
    3. cd /d %windir%\system32 
    4. Net stop vss 
    5. Net stop swprv 
    6. regsvr32 ole32.dll 
    7. regsvr32 oleaut32.dll 
    8. regsvr32 vss_ps.dll 
    9. vssvc /register 
    10. regsvr32 /i swprv.dll 
    11. regsvr32 /i eventcls.dll 
    12. regsvr32 es.dll 
    13. regsvr32 stdprov.dll 
    14. regsvr32 vssui.dll 
    15. regsvr32 msxml.dll 
    16. regsvr32 msxml3.dll 
    17. regsvr32 msxml4.dll 
    Please let us know if any command failed to be performed with an error.
    If issue still exists, have a try with the step it provided "VSSADMIN Resize ShadowStorage" to enlarge the shadow storage.
    Also you could test to delete all old Shadow Copies by acccessing <Drive> Properties --> Shaodow Copies --> Delete Now. This will remove all your backup information so if it is not acceptable, just skip this step.
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

    I'm having severe problems backing up my own machine to a share on our
    FILE-SERVER as \\FILE-SERVER\Backup\
    I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
    FILE-SERVER or the Backup settings.  It has to be something to do with what I'm trying to backup from my machine.
    First some background.
     This exercise all began when the Windows Server 2008 r2
    O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
     In the end I renamed the Server from FILESERVER
    to FILE-SERVER.
    We routinely share four folders on what is now
    FILE-SERVER:
    \\FILE-SERVER\Backup
    - a Folder where backups from all other machines are written, so that they will be backed up with the Server
    \\FILE-SERVER\Company
    - holds all our Company data
    \\FILE-SERVER\GEM
    - this is the application folder for our own database
    \\FILE-SERVER\Install
    - holds all Install files for the software we use
    These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
    Prior to the Server falling over, I had Backup working fine on my machine. 
    On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
    of course shared as \\FILESERVER\... not \\FILE-SERVER\...
    Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
     I started with a Desktop, which of course did not have any Offline Files.
     That proved relatively straight-forward.
    I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
    had worked OK on the desktop machine. But when I ran the backup I got:
    The System cannot find the path specified, Error Code 0x80070003
    I tried all sorts of things to get it to work:
    I restored the system to the earliest point possible,
    I ran chkdsk,
    I defragged the drive
    All to no avail, so I tried backing up:
    with and without a system image,
    reducing the backup to a single folder, 
    a single Folder with only one .txt file in it, 
    making the Folders 'Available Offline' again.
    Nothing made any difference.
     In the end I looked in the Sync Center to look at the Offline Files Folder.
     Under Mapped Network Drives I discovered I still had the Files and Folders from
    \\FILESERVER.  In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
    Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
     So I bit the bullet and re-installed my Notebook too.  This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
    I’ve been through all the troubleshooting procedures in: 
    http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
    Method 1
    It had none of the symptoms reported in  
    http://support.microsoft.com/kb/973455 
    but I scanned for ‘reparse’ points anyway.  Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
    Method 2
    Check a drive for errors. 
    Looked at: 
    http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
    Checked
    both boxes.  I closed machine down, to check for errors when it re-started. 
    It didn’t seem to find anything. 
    I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally. 
    It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier. 
    Method 3
    Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
    I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event. 
    So I’m not sure what’s going on.
    HELP - I'm out of ideas!
    I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
    I cannot find a way of uploading it.

    I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
    of the solutions listed on the Microsoft websites and answers deal with
    "Restore" functions, not the
    "Backup" itself. I have 3 folders being skipped during the backup.
    So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
    but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
    The 3 backup problems are:
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
    Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
    Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
    some recent Windows update.  Thanks.

  • [Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

    Symptom One
    You attempt to
    schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
    The system cannot find the path specified.”
    Cause
    The issue may occur if there is
    no shadow copy storage space available on the backup volume.
    Verify
    You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
    that there is no allocated space for the storage association, you need to resize shadowstorage.
    Solution
    You could run the command below to create shadow copy storage space on the backup volume:
    vssadmin resize
    shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
    More Information
    Vssadmin resize shadowstorage
    http://technet.microsoft.com/en-us/library/cc788050.aspx
    Symptom Two
    When you add
    another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
    Cause
    The issue is due to the
    Original Destination Disk was not attached to the server.
    Verify
    You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
    Solution
    You need to attach
    Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
    Workaround
    To work around this issue, please use the WBADMIN command line tool to add disk.
    WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
    The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
    Example:
    WBADMIN ENABLE BACKUP
    -addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
    More Information
    Wbadmin enable backup
    http://technet.microsoft.com/en-us/library/cc742130.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    good

  • Finding the path with the help of TCode only

    Hi Experts,
    I have a doubt containing that with the help of Transaction code can i find the Path,
    but not the way of "SEARCH_SAP_MENU", this method i know, it applicable only for Easy access only.
    But i cannot able to find the "SPRO / IMG" path.
    Please update with solution
    Regards
    Ravli Kumar .U

    Hi Ravi,
    I am not aware of some direct solution like Search_SAP_Menu for SPRO but here are the alternatives..
    1. Cntrl F in SPRO with some key search words.
    2. Go to that T-code, press F1 and click on customizing from there.
    Regards,
    SAPFICO

  • The system cannot find the path specified - Problems

    I am having an issue that I am hoping someone can help figure out for me.
    I am currently learning Java, and am working with the Beginning Programming with Java for Dummies book second edition. I have downloaded and am running the Java 6 program and am using the JCreator 3.5Pro that was recommended to run the Practice files for the Dummies book.
    I have the practice files here:
    C/Program Files/Xinox Software/JCreatorV3/My Projects
    While trying to compile one of the practice files, I get this error message:
    --------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    javac: file not found: src_mynewproject.txt (The system cannot find the path specified)
    Process completed.
    **When I try to execute, I get this error message:**
    --------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    java.lang.NoClassDefFoundError: EchoLine
    Caused by: java.lang.ClassNotFoundException: EchoLine
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: EchoLine. Program will exit.
    Exception in thread "main"
    Process completed.
    When I set up the new file, and the new class, I confirmed the file path.
    I know most people will ask if I am absolutely certain I put in the code in properly, and yes I did. It was a matter of copying word for word, and punctuation. I did it 100% correctly. About 12 times. I have NO idea what this means, but I would REALLY REALLY appreciate any help on this.
    Please keep in mind, I am slightly clueless, and really need to have any help dumbed down a bit. Lol.
    As a side note, this isn't my first project, and I haven't had this problem before now.
    thanks in advance. =)

    So I wanted to clarify what I've done a bit more since I decided to redownload the dummies programs for the program and try again.
    I will try to list my steps in order of what I did and see if I've gone wrong somewhere along the line.
    I downloaded my project files from here: http://ca.dummies.com/store/product/Beginning-Programming-with-Java-For-Dummies-2nd-Edition.productCd-0764588745,navId-322469,descCd-DOWNLOAD.html
    I unzipped them this time here: C:\Program Files\Java\jdk1.6.0_21\MyProjects\
    I opened JCreator 3.5 and starting fresh, with all previous projects deleted and clicked on "Open Workspace". I chose "MyWorkspace.jcw". Right clicked MyWorkspace and chose "Add new Project" and then chose "Empty Project". As per the books instruction for the first project, I named it "MyFirstProject". My file path was: C:\Program Files\Java\jdk1.6.0_21\MyProjects\MyFirstProject. Which is where I upzipped the files. I added it to current workspace and clicked finish.
    I then added a new class. As per the books instructions, I right clicked "MyFirstProject" and selected Add New Class. For the name, I used MyFirstJavaClass, which is what the book told me to do. My locations are the exact same as above. and I clicked on Generate new Method, as it told me to. Which it doesn't in the next few lessons, so I know this has nothing to do with it. For that and a few other reasons. Lol.
    I clicked on Finish.
    All I had to do was replace a single line of code. Not type it all in this time.
    Here is what shows up on the screen:
    class MyFirstJavaClass {
         * Method main
         * @param args
         public static void main(String[] args) {
              // TODO: Add your code here
    I need to change the : // TODO: Add your code here
    with the line:
    System.out.println.("Chocolate, royalties, sleep");
    When I do this, and compile project, I get this:
    --------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    javac: file not found: src_myfirstproject.txt (The system cannot find the path specified)
    Process completed.
    AGAIN! But it worked a few days ago.
    And when I execute, I get this:
    --------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    java.lang.NoClassDefFoundError: MyFirstJavaClass
    Caused by: java.lang.ClassNotFoundException: MyFirstJavaClass
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: MyFirstJavaClass. Program will exit.
    Exception in thread "main"
    Process completed.
    I really hope the extra info helps someone help me!
    thank you!
    Edited by: MissPamela on Jul 19, 2010 3:23 PM

Maybe you are looking for