Find the transaction for an message - M8 - 155

Hi All
Is there is any option available to find the transaction code by messages
Exxample
message id is - M8
Message no is - 155
I found this message triggering in Program name - LMG11U05
Can u help me to find the transaction code of this message triggers.
Cheers
Priyanka

Hi Deekshitha,
NO.
Messages and transaction are not related at all. Transactions are 'entry points' for processing. Usually a transaction code is connected to a program an a screen. Starting there, any functions, programs, methods or transactions can be called. The called objects can do the same.
A message can be called directly in the program (This is what you found in function group MG11) or dynamically, selected via control tables or other methods.
You could check the function name of LMG11U05 and request a where-used-list. Then check transaction table TSTC for the programs found in the where-used-list. If you are lucky, it solves your question - at least partially. Because the message may be called elsewhere, too.
If not solved, please describe the situation in detail.
Regards,
Clemens

Similar Messages

Find The Transaction for the given EXIT Name

Hi Friends,
This is my doubt,pls dont think in the other sense
I know how to find the EXIT for a given Transaction. My question is that IS THERE IS ANY WAY TO FIND THE TRANSACTION FOR A GIVEN EXIT NAME.Could any one help me out on this.My fuctional guys are giving me the EXIT names and asking me to find for which transaction the exit triggers.
Thanks & Regards
Vijaya Lakshmi

hi lakshmi,
try the following steps.
1. give the exit name in SMOD.(J45A0007) go to display mode
2. click component and take the exit name.(EXIT_SAPMJ45A_009)
3. here SAPMJ45A is the progam name, so that in SE38 give the progame name click the Where used button and select the transaction and deselect other checkbox.
4. you will get the transaction code.
Reward if found helpful.
Regards,
Boobalan Suburaj

How to find the transaction code for the particular program or include

Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
Muralikrishna

HI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful

I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file

I get a message that itunes has stopped working. When I check out why it is because of the dep security on my computer. When I try to find the program for itunes for the .exe file i cannot find it to turn off the dep for that file

I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

Where can i find the theory for session and call transaction method

hi
where can i find the theory for session and call transaction method
bye

check this link
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.planetsap.com/bdc_main_page.htm
lsmw, bapi, bdc- session, bdc-calltransaction
u can get it in help.sap.com also

To find the Gap for a requirement in BI reporting.

Hello team,
We have a requirement and to find the gaps for it.
There is a table in ECC LV70T and the Field name is LTX01 (Description: Internal comment). The field is to identify the promotions and campaigns
The requirement is to add this field in the BI report as a free characteristics. Is it feasible?
The field should basically display the technical definition in the BI report.
I understand this field is already avaible in ECC table. It can taken in, by enhancing the extractor. Later from there it can be taken in to BI and then to the report. Please let me know, if I am missing anything.
Thanks..
San

Hi,
Thanks Stick and Sandeep for the response.
Yes, both are in the same ORG.
I queried the PO and select View Receipt (here i can view the receipt details) and then Transactions, but i do not see any error message there.
Thanks
Edited by: Skumar on Jun 27, 2011 2:37 PM

RFC metadata import error - Couldnu0092t find the branch for version with id

Hi All,
When re-importing RFC meta-data, system returned following error message <i>Couldnt find the branch for version with id = <version id></i>
I am not able to delete the existing (already imported) RFC meta-data. However, I am able to import the same RFC into a different Software Component.
The error is described in SAP note 710998, unfortunately, this note only references XI 2.0
Is there anyway other than these-
1) Deleting a new SWCV and importing it and then import the RFC and make Release transfer from new SWCV to Old SWCV. If so, is there any impact on my QA systems and Productions systems during transport.
2) Deleting the existing SWC and Reimporting from SLD and trying to import the RFC again and redoing all the design
3) Exporting the current SWC and deleting it and importing the same file and then trying out the RFC import.
These options I just thought as an workaround solutions. Because i am not able to try these, as i don't have any test systems for this. Let me know any suggestions on these.
Thanks in advance,
Regards,
Moorthy

Yes, the used structures were imported from an old XI system. But I created the mapping new on the PI and put the used externel definitions manually to the mapping. That worked fine but now everytime when saving the mapping this error occurs. Btw both structures are used in other mappings, too, and they can be modified without any problems.
Which jdk version do you mean? Client or server?
Regards.
Oliver.

Kindly let me know the transaction for checking the Status of par.User?

Kindly let me know the transaction for checking the Particular Users Status?
I mean to say,Which Transaction is he into?
Or Is he/She Logged on to a particular System?
Regards,
Shashank.

Hi,
Go to Transaction SM04.You will find the List of Users And the List of transactions ther are currently using.
Regards,
Sujit

Cant find the file for approval

Hi Guys,
I have selected service application tool package for download.it requires approval which is to be done in MOPZ.
When i login to our solman i cant find the file for approval in MOPZ.
steps that i follow
1. Tcode DSWP.
2 go to change mdmt
3 select Maintanence optimize.
I cant find the file to approve.
Do i need to create a new maintaince tcode...?
Please help

Hello,
Please make sure that the S user password is not in initial state. Please also make sure that you can login with no issues in the SAP Service Marketplace , and that the 'authorization test' for SAP-OSS works OK.
I am not sure about when you report the error message as: "Logon information is not write." . What do you mean?
Also, you say that you go to DSWP and the file is not there to approve. The correct way to approve files from Maintenance Optimizer when downloading manually, is to create the Maintenance Optimizer document, then choose the manual selection option, then select the files from within Maintenance Optimizer, and then proceed with the download from Maintenance Optimizer.
Best regards,
Miguel Ariñ

Cannot find the classfile for javax.mail.internet.AddressException

Hi,
Scenario is SAPCRM 7.0/ECC.
We are trying to extend the EmailAction class.
The error bieng faced is
Cannot find the classfile for javax.mail.internet.AddressException.
We have added crm/isa/lwc to the used Dcs but still this error is there.
Mail.jar is also present in the system.
We are not able to make out what exactly the issue is.
Please help.
Thanks,
Rohit

Hi Rohit,
Did you ever find the solution to this problem? We're encountering the same error message.
Thanks!
Joe

Find the manager for pirticular emp

Dear all,
i know the employee how to find the manager for that pirticular employee what is the navigarion path.
good answer would appriciated.
By
Bose

Hi,
IN the transaction PP01 por object type P you have to check the relations A012 and A02.
Regards,
Kapil

Windows 2003 Server reboot but not unexpected, couldnt find the trigger for reboot

Hi All,
I have windows 2003 Server 32 bit,std. Which is getting rebooted every 2 days once at 5 AM. I couldnt find the cause for the reboot. Need
I dont see anything in system log apart from event 6006 (event log service stopped).
Enabled advanced Auditing , nothing suspecious found.
No scheduled task or job.
Antivirus scan is clean, no internet access to the box.
Its Virtual machine, all other VM's hosted on ESX server (where the machine with issue hosted) are working fine.
Removed all users admin rights.
Disabled NIC to check if the reboot intiatation happening from network, however server still reboots at 5.
Run process monitor and saved the file at 4:59:38 AM (just before the reboot), nothing supecious found.
Its used for build , various versions of Visual Studio is installed on the box and other tools are installed too.
However could not find a reason or log to find what is causing these reboot.
Need a direction on troubleshooting this urgently.
In application event log i see below.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: ExitWindowsEx executed succesfully!.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: Initiating FORCE REBOOT.

Hi,
I agree with Dave Patrick, please confirm there have any software trigger the Windows restart API, and please refer the following hotfix scenario applied to your environment
or not.
More information:
You may experience an abnormal shutdown on a Windows Server 2003-based computer after the Windows logon screen saver starts
http://support.microsoft.com/kb/916719/en-us
Why Windows NT Reports 6005, 6006, 6008, and 6009 Event Log Entries
http://support.microsoft.com/kb/196452/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

APP-QA-16161: Cant find the Transaction Block

When I click on Create Service Request or View Service Request form I get message
APP-QA-16161: Cant find the Transaction Block
The error is coming from the pre-form trigger of the CSXSRISR.fmb.
We have copied the .fmx of this file and all associated files from other instnaces, but still the issue is present.
Also, the issue is not present when we enable FRD trace.
Anyone has any suggestions on the same?

Hi,
Please verify that you have no invalid objects in the database -- See (Note: 308927.1 - APP-QA-16161 - Can't find transaction block. Please inform system administrator).
If the above does not help, see (Bug 7253526 - RCVTXERT: APP-QA-16161 CAN'T FIND TRANSACTION BLOCK), I believe you would need to log a SR as the solution is not mentioned.
Regards,
Hussein

Where to find the logs for cronacle queues

hi i m using redwood explorer 7.0.3 . Someboday had hold the cronacle queues . it was giving the message queues held by operator . But we don't know who held the queues. Can anbody tell where we can find the logs for these queues i.e who made changes w.r.to Cronacle queues.
Regards,

Hi,
Yes this can depend on your system configuration
To view the current settings of all parameters, you can:
Use the Redwood Explorer and navigate to Configuration > Environment > Schedulers > SCHEDULERNAME > Parameters..
Use the SHOW PARAMETERS or SHOW ALL command in the Redwood Shell.
Look in the Master agent trace file.
also check the operator messages in cronacle.
Regards

NOTFOUND:Could not find the nisDomainObject for DN dc=intec,dc=co,dc=za

I have iPlanet Directory server 5.1 SP1.
I have set up the nisDomainObject and the nisDomain attribute.
I can generate the ldap profile, and ldapadd to the the directory server. The problem comes in when trying to use ldapclient. I get the following message. I have added the attribute entry to the baseDN and the rootDN, but with the same error each time.
parsing -P option
parsing -d option
findDN: begins
findDN: calling __ns_ldap_default_config()
found 2 namingcontexts
findDN: __ns_ldap_list(NULL, "(&(objectclass=nisDomainObject)(nisdomain=intec.co.za))"
rootDN[0] dc=intec,dc=co,dc=za
NOTFOUND:Could not find the nisDomainObject for DN dc=intec,dc=co,dc=za
findDN: __ns_ldap_list(NULL, "(&(objectclass=nisDomainObject)(nisdomain=intec.co.za))"
rootDN[1] o=NetscapeRoot
NOTFOUND:Could not find the nisDomainObject for DN o=NetscapeRoot
cannot find search base DN

you don't have set your nis domain for your client .
domainname intec.co.za

Find the transaction for an message - M8 - 155

Similar Messages

Maybe you are looking for