Find the usage for each device on the router per day or month (megabytes per mac address)

HI --
We have a single cable connection and a router network with over 10 unrelated users in our complex.  We want to keep usage fair, the network unstressed and to identify machiines that might have viruses or otherwise be using more than the owner is aware of. We are running a WRT1900AC.
Does the router itself keep statistics for usage over time per ip/mac address?  If so, how can we access these statistics?  Can the router be instructed to keep this, say in firmware?
If not is there a program available (free or reasonably cheaply) that can poll the router and produce an estimate of usage? 
Any advice? 
Others may wish to know what is going on in their network.
Many thanks,
Outis

The router has an Internet Usage feature in its Network Map. You may use this feature to monitor the bandwidth consumption of each device. Check this link:
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=29285

Similar Messages

  • How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

    How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

    The following example was one of dozens that showed up on a simple Google search of.....
    monitor Internet data use on a Mac
    Watch your Internet usage with NetUse Monitor | Macworld
    Most service providers have an application for their users as well.

  • How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

    How to let the user define the colors for each plots in the graph (I
    use LabVIEW 7)?

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • How can I open another iCloud account for each devices with the same apple id

    my family has 2 iPhones 1 iPad 1 Macbook and 1 iMac. I had all the devices set up with one iCloud under 1 Apple ID. Now things are getting so mixed up with pictures, videos, calendar, notes and reminders etc. 1 iPhone is also unable to sync due to not having enough storage for all our devices. Someone from Genius Bar said we can have iCloud for each device under 1 Apple ID. I backed up all pics. videos notes important docs to my iMac and MacBook then I turned off all iCloud in all of the devices now I need help to create a new iCloud account at least for my 3 mobile devices to end all the confusion. every time I try to click the button "set up iCloud on this device" I always go back to apple site with step by step by step instruction but I keep going around in a loop. Please help

    I'm not sure what they told your at the Apple store, but each Apple ID can only create a single iCloud account.  If you want separate accounts for all these devices, they will have to be created using separate IDs.  Note: you can do this and still share the same ID for other services such as your iTunes store account.  The iCloud ID does not need to be the same as the ID used for other services.
    To create an account, go to Settings>iCloud and sign in with a different Apple ID.  If you want to migrate a copy of the current iCloud data to the different accounts, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll.  If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account.  Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; the devices keeping the current account will not be effected by this), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted.  Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.

  • Is there a way to get the details for each hit in the portal database WCR_WEBCONTENTSTAT?

    Hi,
    I need to get the details for each user hit.
    Apparently, this table has the IMPRESSIONS column which returns the total number of hitcounts and VISITS which counts the number of unique user who accesses the portal. What I am trying to look for is to get all the details per hitcount. I need to find out how many time a specific user accessed a specific page or iview.
    I also used the table WCR_USERPAGEUSAGE, which I get the information of the users counted in the VISITS column in the first table.
    I could not get the specific user per hit.
    Please enlighten me if this is possible and how to do this?
    Thanks!

    Hi Catherine,
    Why not use the portal activity report iView?
    In the portal activity report iView the 3rd option allows you to choose a page for example and see
    the user who accessed it and how many times.
    Thanks and BR,
    Saar

  • ICloud popups come up everytime a new iPad is enrolled,  once for each device on the iCloud account. Can I stop this?

    iCloud is disabled in Configurator. User has to click OK repeatedly, taking over 5 minutes to get through them all.

    Here are the places to report bugs:
    Get an account at
    http://developer.apple.com/  then submit a bug report to http://bugreporter.apple.com/
    Once on the bugreporter page,
       -- click on New icon
       -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs.  Scroll down to find the area or application that matches the problem.
       -- etc.
    Developers:
    "Submitting Bugs and Feedback
    Your feedback goes a long way towards making our products even better. With Apple Bug Reporter, you can submit bug reports or request enhancements to APIs and developer tools."
    https://developer.apple.com/bug-reporting/
    Enterprise support:
    Call enterprise support  (866) 752-7753  to create  a case ID number

  • What are the privledges for each level of the support communities

    do i need to say more?

    Hi:
    That is a question I have never had before!
    I have been posting on Apple's user-to-user forums for over 10 years.  Before I began trying to help others, I received a good deal of very helpful information from other people.The time I spend varies - depending on what I am doing that day and my own interest level in reading posts (and then trying to suggest approaches to problems).  Since I retired several years ago,  I spend more time here than when I was working.  People who post here are all volunteers - this is not a job for us.
    The Level 7 is something new when Apple released the new ASC and re-defined the levels.  In the "old days," I was a L4.  As I recall, it took about five or six years to reach that level.
    Points are obtained if the original poster thinks you have helped them (or solved a problem).  The point award is completely voluntary.  In my own experience, I probably get points from every fifth or sixth post I make.  Either I do not give useful advice or the OP is unaware of the point thing - or just not interested. 
    In summary, we would not do this if we did not genuinely get satisfaction from trying to help other people.  It can be frustrating at times, but mostly more positive than negative.  When I dipped my toes in the water and began trying to use my limited knowledge of Apple computers to help others, I was tentative.  One of the positive things I have personally gotten from reading all these posts is that I have learned a great deal from others over time. 
    I got wordy...sorry for the windy answer to your question.
    Barry

  • Ungroup a group and keep the scriptlabel for each item of the group

    Hi
    does someone know how to ungroup a group of rectangles with a certain label (example groupA) an give each rectangle a own label (the same text groupA)
    I can find the group and ungroup it but I can't label the rectangles...
    var oPageItems = app.activeDocument.allPageItems;
    for (var j = oPageItems.length-1;  j >= 0; j--) {if (oPageItems[j].label==("groupA")) {oPageItems[j].ungroup();)
    Please help

    Hi,
    before
    oPageItems[j].ungroup();
    go into the loop and set proper label to each item inside group:
    for (var k; k < oPageItems[j].length; k++)
    oPageItems[j][k].label = "groupA";
    assuming your oPageItems[j] is a group indeed.
    hope...

  • Table of content, I want to display just the image for each chapter and the name of the chapter. my book is not landscape format but each time I draging a picture into a specific chapter it duplicate it to all chapters why?

    table of content in a landscape orientation.
    I want to have in my table of content only image and the name of the chapter which is each to do.
    my problem when I am draging an image to each chapter it copied it to all chapter although I am marking only the specifc chapter.
    why? how can i overcome it?

    Are you using Microsoft word?  Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users.  I have seen this message from Microsoft word.  It's annoying.
    As BDaqua points out...
    When you copy information via edit > copy,  command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
    If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information.  Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
    You should be saving your work more than once a day. I'd save every 5 minutes.  command + s does a save.
    Robert

  • How could i get the kernel and user cpu usage for each process

    Hi all,
    In order to monitor the system CPU usage, I would like write a script to gather the kernel and user CPU usage for each process, like the prstat or top does. As always missing the shortlived kernel usage, prstat or top cann't get the precise CPU usage. I checked with the dtrace syscall, proc and fbt provider, but don't get which one is useful.
    Please provide your comments and suggestion.
    Thanks in adv

    mail2sleepy wrote:
    As I've studied the "dtrace" for a while, and seems Sun gives a pretty high score on this new feature.....I do want to know whether there's some probe can work for it, like writing a "dtrace" version prstat.You can write a prstat without dtrace. Because that's just polling at specific intervals and reading some process structures from /proc. You could have dtrace fire a probe every 5 seconds and read the same thing, but it wouldn't really be using any features of dtrace. Trhying to write it "in dtrace" doesn't make much sense.
    What you could do that would be harder via other methods is to fire a probe at process exit that displayed the process information including total CPU time. They could print exactly when processes exited. Doing that without dtrace would be very difficult.
    Darren

  • Find out how much each device is downloading

    Hi All,
    Is there an easy way to find out how much each device on the network is using (Such as Laptop, Youview box, Xbox, PS3 etc) as i am just curious as to how much i am actually downloading per month. 
    Surely you must be able to get the stats out of the router or modem?
    IT SUPPORT TECHNICIAN - Comptia A+ Certified, MTA Qualified and MTSC qualified

    You could still use the Belkin connected to the Homehub for everything except BT TV.
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Cisco Network Assistant, Enter Password for each device

    Does anyone know a way that when you open a community you have to enter your username and password for each device listed in that community? I know with it currently you enter your username and password one time for each device, but I want it to prompt mne for username and password for each device in the community. I unchecked "Encrypt and Store Device Credentials" and it still only prompts me one time for a username and password.                   

    Hi,
    We tried reproducing it in our local set up and we also analyzed the problem with respect to the expected behavior in CNA.
    Could you please share some more details as mentioned below so as to provide you the exact solution.
    1) Is the same set of user name and password used for all the devices?
    2) Was the password store feature enabled while creating community and was disabled later?
    Regards,
    Pramod

  • I have 3 iphones, an ipod touch and an Ipad on the same itunes account.  should I have a different account for each device?  If so how do I get all my purchases, like music on all the devices?

    I have 3 iphones, an ipod touch and an Ipad on the same itunes account.  should I have a different account for each device?  If so how do I get all my purchases, like music on all the devices?

    You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.

  • I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

    I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.  I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it.  Any ideas on what to do?

    Thanks but that doesn't give me the information I need.  I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use.  My Apple ID can be varified, just not the email that they will contact me with.

  • I am a teacher with 7 iPads for my room with no VPP or Apple Configurator.  May I use the same Apple ID for each of the devices with a separate password for each device?

    Who can help me with the above question?  Multiple iPads in one classroom:  may I use the same Apple ID (which is my work email) for each iPad, and construct a separate password for each device?  My school does not have VPP or Apple Configurator

    Password to what, exactly? If you're referring to the screen lock, each iPad can have a separate passcode, since that's not tied to an Apple ID. If that's not what you mean, please post back and clarify what password you're referring to and what you wish to accomplish.
    Regards.

Maybe you are looking for