Find total count for Address Book?

In Snow Leopard it was easy to find the "Total Count" for ALL CONTACTS. As soon as you clicked on ALL CONTACTS or even a GROUP in all contacts the amount showed at the bottom of the screen. LION appears to be different. I know you can click on ALL CONTACTS, scroll all the way down to find the total number of contacts (a lot of trouble). However, if you click on a GROUP the total does not show "at the bottom"??? You can go to Address Book > Edit > Edit Dirtribution List and see the totals of individual groups but ALL CONTACTS is not shown because it is a "distribution" of all contacts. Question is: Is there an easy way to find the total count not only for ALL CONTACTS but including GROUPS with out having to go to so much trouble?

I find that if you have a critical number of cards in a group it will show the total number at the bottom of the list when you scroll down (I agree, a real nuisance!). I'm not sure what the critical number is, but I have lists with 20 cards and it doesn't show, while a list of 40 does show the total.
I am not able to choose Edit > Edit Distribution List, since it is always greyed out. Is there are trick?
I really find that Address Book in Lion has lost functionality – don't understand the change to a "book" format where you have to flip back and forth – would much prefer a 3 column format.

Similar Messages

Can't find Application Support for Address Book in Lion. Any ideas where to go?

I need to re-establish my Address Book after iCloud doubled all of the entries in it. But I can't find Application Support for Address Book in Lion.
Can someone help?

Go menu -> Go to folder.
Enter ~/Library
And select Go.
Your contents will now be visible.
WARNING: messing around with these contents without at least twice backups may make your data inaccessible or worse if you don't know what you are doing.

Help in finding the total count for each month

Hello everyone,
Sometime back I had posted about the date function. I have that problem solved now my problem is that after finding all records which against each record I need to find the total count for that month if no records than I have to set it to a 0.
Here is how my program has been written.
PROCEDURE extract_materials
IS
CURSOR xyz
BEGIN
FOR xyz1 IN xyz LOOP
-- once inside the loop for each of the record from
the cursor I need to find a total count for that record for everymonth in the year.
All these records will be instered in to a staging table
Can you please help me out with this. I really appreciate this.
Thanks in advance.
-Vani

Andrew - you missed the tricky bit of the spec - include missing months with a zero.
You need to do an outer join to a select from any big table with a function involving rownum and add_months to generate all the possible months. However, its time to go home and I can't be bothered to work out the finer details.

Tags or keywords for Address Book?

I'm surprised to find that Address Book doesn't seem to offer any sort of tags, keywords, or categories for contacts. I've searched the web and can't seem to find any information about this, or a plugin that do for Address Book what MailTags does for Apple Mail. Does anyone know of something to help???

I mostly use groups for both those purposes. I also use the company field as a sort of tag, since very few of my contacts are companies rather than individual. So I have contacts with builder or plumber or electrician in the company field - but this won't work for you if you need that field for company names. The other field you can use is the notes field; you could put several tags in, and you wouldn't need any special separator as search will find them.
The advantage of groups, for me, is that you only have to type the tag or category once and you can so quickly isolate all those in the group. A contact can of course be in multiple groups; indeed a group can be in a group.
AK

Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.

Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.

Where are addresses kept on MAIL? I don;t like the new format at all. Frances
Begin forwarded message:
From: Frances Topping <[email protected]>
Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
Date: August 25, 2014 at 9:46:01 AM EDT
To: discussions-replies <[email protected]>
Old Entourage is POP and new Mavericks MAIL is IMAP I believe. I don;t know how to export in the forms you mention. Frances

Sync is currently unavailable for address book because of wireless sync

I am trying to sync by calendar and address book.
Works for the Calendar but not Address Book.
I get the following Sycn Warning message. Synchronization unavailable for: Address Book because the application(s) is (are) configured for wireless synchronization. Desktop synchronization for the above application(s) will be disabled. click here for information how to disable wireless sync on your device.
Followed instructions to the letter numerous times and it doesn't work.
HELP!

Are you connected to a BlackBerry Enterprise Server? If so you can delete one service book on your device, and this will allow you to sync your device through the wire.
To do this go to: Option> Advanced Options> Service Book. In here look for the Desktop [SYNC] service book. Press the menu key and choose delete.
Now you should be able to sync your device with Outlook. Once the sync is done go back to: Option> Advanced Options> Service Book. Press the menu key and choose undelete.
Hope this helps.

How to find MATCH count for # in a String

Hi all,
How to find MATCH count for # in a String.
Ex: 6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20
Regards,
Balavardhan.K

>
balavardhan k wrote:
> I have used below syntax to find count but it is not returning the value and SY-SUBRC = 4.
>
>
> Data : l_text type string.
>
> l_text = '6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20'.
>
>
> FIND ALL OCCURRENCES OF '#' IN L_TEXT MATCH COUNT mcnt .
Then it's not a # but possible a horizontal tab-sign.
Do a find on cl_abap_char_utilities=>horizontal_tab instead.
Edited by: Maen Anachronos on Nov 23, 2010 2:48 PM

How do I find nook id for a book

how do I find nook id for a book

I'm looking for the username and unlock code for a nook book I just bought.

Groupwise Field Definitions for Address Book entry

Hi,
I am looking for Groupwise Field definitions i.e. Field Names associated with Address Book entry (Contact and Organization). I am using OAPI to access the Contact's field values and set the Contact's field values by Field Name. Is there any place which has the list of all the field Names associated with Contact and Organization Address Book entry.
Note: Field Definitions for Address Book entries that are in PAB.
I also look for the comparision of Field Names in Groupwise 7.0 and Groupwise 8.0.
Thanks,
Pranav

Why don't you iterate through all the field definitions of a given abook?
This will give you the list of all possible fields for an entry.
Markus
"pranov2001" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
>
> Hi,
>
> I am looking for Groupwise Field definitions i.e. Field Names
> associated with Address Book entry (Contact and Organization). I am
> using OAPI to access the Contact's field values and set the Contact's
> field values by Field Name. Is there any place which has the list of all
> the field Names associated with Contact and Organization Address Book
> entry.
> Note: Field Definitions for Address Book entries that are in PAB.
>
> I also look for the comparision of Field Names in Groupwise 7.0 and
> Groupwise 8.0.
>
> Thanks,
> Pranav
>
>
> --
> pranov2001
> ------------------------------------------------------------------------
> pranov2001's Profile: http://forums.novell.com/member.php?userid=82100
> View this thread: http://forums.novell.com/showthread.php?t=406199
>

How to find Opening Balance for Cash Book

Hello Friends,
I am Creating one Report for Cash Book.(Means : For Perticuler GL Account)
I have no idea how to find Opening Balance for some Perticuler Date.
Ex.
     Current date: 07/06/2007
    and i want to find Opening Balance on 26/05/2007
i have Function for Calculating Opening Balance,
Group No: 3006             Business Object General Ledger Account
BAPI_GL_ACC_EXISTENCECHECK     Check existence of G/L account
BAPI_GL_ACC_GETBALANCE     Closing balance of G/L account for chosen year
BAPI_GL_ACC_GETCURRENTBALANCE Closing balance of G/L acc for curr year
BAPI_GL_ACC_GETPERIODBALANCES Posting period balances for each G/L account
but they show current opening balance, and i want for perticulaer Date..
         How to find Opening Balance for Cash Book
please Help me out
Thanks
Gaurav Tripathi

Hi Maruthi,
   Opening balance for a cutomer for a given period, u need to first find closing balance of that customer in the previous period. For eg. Suppose u want to find opening balance for customer 'A' for month of Nov'06, then U have to find wot was his closing balance in at end of Oct'06. Hope this solves u r problem

Where does 10.6 keep exchange data for Address Book?

Today I lost many of my exchange contacts (??) and I'd like to restore from a backup, but the database in ~/Library/Application Support/Address Book only seems to contain the "on my mac" addresses, and I really need to restore from a backup that contains my exchange contacts. Restoring from time machine fails, it only restores my local contacts. Anyone know where I can find that data? Totally baffled by this...

It's not only Exchange entries, I have the problem with regular address book entries stored locally (and synced to MobileMe). Sometimes they pop up, sometimes they don't, sometimes some show up but not all of them, it's very odd. I can temporarily correct the problem by adding the Library/Application Data/Address Book folder to Spotlight privacy exclusion, letting it sit for a few minutes, then removing it (so that it re-indexes the data), but with hours, it back to mysteriously dropping data.
Also recently all data in my Address Book disappeared, and I had to delete all the files in the Library/Application Data/Address Book folder, then re-sync to MobileMe in order to get it back. Very concerning!
I've been having this issue since 10.6 was initially released, and it concerns me that 2 point releases have gone by without a fix for this.
You can view the following thread for more information: http://discussions.apple.com/thread.jspa?threadID=2214807&tstart=0

Source code for address book

hi everyone,
i have to make a contact wizard for iphone, i have allready designed the view for contact wizard using navigation controller, there are 3 pages total which includes UITextFields, PickerView, and Table View.
Now i dont know where to write code for add contacts in address book database.
can any one help me by some code sample...?????
i have written code in a function which is called on the Navigation toolbar Button
the code is
ABRecordRef aRecord = ABPersonCreate();
CFErrorRef anError = NULL;
ABRecordSetValue(aRecord, kABPersonFirstNameProperty,
CFSTR("Jijo"), &anError);
ABRecordSetValue(aRecord, kABPersonLastNameProperty,
CFSTR("Pulikkottil"), &anError);
if (anError != NULL) {
NSLog(@"error while creating..");
CFStringRef firstName, lastName;
firstName = ABRecordCopyValue(aRecord, kABPersonFirstNameProperty);
lastName = ABRecordCopyValue(aRecord, kABPersonLastNameProperty);
ABAddressBookRef addressBook;
CFErrorRef error = NULL;
addressBook = ABAddressBookCreate();
BOOL isAdded = ABAddressBookAddRecord (
addressBook,
aRecord,
&error
if(isAdded){
NSLog(@"added..");
if (error != NULL) {
NSLog(@"ABAddressBookAddRecord %@", error);
error = NULL;
BOOL isSaved = ABAddressBookSave (
addressBook,
&error
if(isSaved){
NSLog(@"saved..");
if (error != NULL) {
NSLog(@"ABAddressBookSave %@", error);
CFRelease(aRecord);
CFRelease(firstName);
CFRelease(lastName);
CFRelease(addressBook);
But it is showing many errors.
can any one give me some advice how to manage it?

You probably won't get much help here... this is a user forum, not a developer or programmer forum.

How to find total count of records in a cursor

Aassume below is the cursor i defined
cursor c1 is select * from emp;
now, i want to find the total count of records in this cursor using an existing function etc., using one line statement.
FYI: c1%rowcount is always giving 0, so i cant rely on this.
Any thoughts, please share.
Thanks in advance.

I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6     loop
7        if v_cnt = 0 then
8           v_cnt := rec.rn;
9        end if;
10     end loop;
11     if v_cnt = 0 then
12        raise zero_rows;
13     end if;
14   exception
15    when zero_rows then
16      dbms_output.put_line('No rows');
17   end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from
6          (select rownum rn, e.ename from emp e)
7          order by 1 desc)
8     loop
9        if v_cnt = 0 then
10           v_cnt := rec.rn;
11           dbms_output.put_line(v_cnt);
12        end if;
13     end loop;
14     if v_cnt = 0 then
15        raise zero_rows;
16     end if;
17   exception
18    when zero_rows then
19      dbms_output.put_line('No rows');
20   end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri

Room Finder not working with Address Book Policies

Hi,
I have an issue with Room Finder and Address Book Policies whereby when a mailbox user is apart of an ABP they cannot see any rooms within the room finder in Outlook. They can however see their organisations rooms in the address book (which is
the intended outcome of using ABPs)
If the user is part of the default GAL (no ABP) then all roomlists can be seen in room finder making me suspect that the problem is with the ABP
I came across an article which is very similar to the problem that I am encountering however I am already using the suggested fix (using recipient filters) -
Background to configuration
We have a multi tenant exchange 2013 environment where each tenant is segmented from other tenants by the use of address book policies.
Each tenant have been set-up using the following cmdlets:
New-GlobalAddressList -Name "TenantName - GAL" -ConditionalCustomAttribute15 "ABC" -IncludedRecipients MailboxUsers -RecipientContainer "Path/to/OU
New-AddressList -Name "TenantName - All Rooms" -RecipientFilter "(CustomAttribute15 -eq 'ABC') -and (RecipientDisplayType -eq 'ConferenceRoomMailbox')" -RecipientContainer "Path/to/OU
New-AddressList -Name "TenantName - All Users" -RecipientFilter "(CustomAttribute15 -eq 'ABC') -and (ObjectClass -eq 'User')" -RecipientContainer "Path/to/OU
New-AddressList -Name "TenantName - All Contacts" -RecipientFilter "(CustomAttribute15 -eq 'ABC) -and (ObjectClass -eq 'Contact')" -RecipientContainer "Path/to/OU
New-AddressList -Name "TenantName - All Groups" -RecipientFilter "(CustomAttribute15 -eq 'ABC') -and (ObjectClass -eq 'Group')" -RecipientContainer "Path/to/OU
New-OfflineAddressBook -Name "TenantName" -AddressLists "TenantName - GAL"
New-AddressBookPolicy -Name "TenantName" -AddressLists "TenantName - All Users", "TenantName - All Contacts", "TenantName - All Groups" -GlobalAddressList "TenantName - GAL" -OfflineAddressBook "TenantName"
-RoomList "TenantName - All Rooms"
As you can see each address list is populated by custom attribute 15 corresponding to the tenants code (of local significance) and the OU that the object resides in.
N.B. I have rebuilt my outlook profile, switched to non-cached mode to no avail
To reiterate, the ABP is working great apart from this room finder feature issue, each tenant can only see their rooms in their address book just not in the room finder.
I have tried to build distribution group roomlists and set the custom attribute and OU to test but this didn't work as I'm aware you can only have address lists in the set-addressbookpolicy -roomlist cmdlet parameter, not distribution groups

Hi Winnie,
Apologies for not replying sooner, I've been busy over New Year!
I have already seen/followed similar instructions to create roomlist's to no avail.
The roomlist's created are all visible to a user when they are not apart of an ABP but when they are part of an ABP it shows no roomlists within room Finder.
As initially mentioned, the tenants rooms can be seen in their address book just not in room finder!
Here is the powershell results
PS] C:\Windows\system32>Get-DistributionGroup "Group: Test Room List"
Name DisplayName GroupType PrimarySmtpAddress
Group: Test Room list Group: Test Room list Universal [email protected]
PS] C:\Windows\system32>Set-DistributionGroup "Group: Test Room List" -RoomList
WARNING: The command completed successfully but no settings of 'cdc.com/Cdc/Group: Test Room list' have
been modified.
PS] C:\Windows\system32>Get-DistributionGroup "Group: Test Room List"
Name DisplayName GroupType PrimarySmtpAddress
Group: Test Room list Group: Test Room list Universal [email protected]
PS] C:\Windows\system32>

Access via command line to the data files for Address Book

Snow Leopard Server 10.6.8
Mac Mini 2.66 GHZ Intel Core 2 Duo 4 GB 1067 MHZ DDR3
I rolled back from Mountain Lion Server to Snow Leopard Server because I needed mySql. At the time I was under AppleCare and they walked me through the steps. However, I ended up with Address Book issues.
Addressbook user on the Snow Leopard Server was upgraded to Mountain Lion Server. During the rollback process, the Apple tech had me delete the Addressbook user.
When we finished the rollback, he had me recreate the Addressbook user, but now it is linked to a new, empty data file. I cannot add new contacts nor edit or delete them. So I need to use the command line to view both data store files, find the one that has my data in it and re-attach it to my new Addressbook user.
Can someone help me with the Command Line commands?
Thank you,
Cailyn

Hi,
There are a couple of more advanced solution I can think of and I'm actually working on one myself.
* You can create your own jnlp client that allows you to pass in arguments. That sounds harder than it easy. Building a stripped down jnlp client (e.g. no installer, no applets) using one of the two open-source client as a start takes probably just a couple of days and should be sufficient for in house usage.
* Another solution is what I'm working on now. You can wrap your own executable around javaws that takes your passed in arguments plus jnlp href and looks up the original in the cache and adds a new one to the cache that it passes on to javaws and suddenly everything works as it should. The magic will be revealed at http://www.geocities.com/vamp201
- Gerald Bauer

Find total count for Address Book?

Similar Messages

Maybe you are looking for