Find users with Role A and Role B but not Role C

Hi all.
How can I find users that have a combination of roles? The find user and user reports only have one line for selecting a role the user has. Is there a report that lets you select multiple roles? It would be really handy!
Thanks,
Jim

If you haven't found it, there are likely no such reports, but it is easy to do that in a custom report. The problem is that its really badly documented how to make a custom report. But, it's really not that difficult if you know what to do. I will, when I get some spare time, post a guide here on how to make a custom report, the way I, and some other people, think it should be done.
Roughly a custom report consists of three parts, a listing object, to make the report turn up in the report list, a report form, and the report WF. The trick is to know the correct subtypes, attributes and such.
But take a look here Sunday, and there will possibly be a nice custom report guide posted.

Similar Messages

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

ITunes won't recognize iPhone (3G), restored with another pc and worked once but not anymore, help please

- I changed a new case, battery and a headphone jack, after that iTunes didn't really wanna recognize my iPhone
- I've had the same problem earlier too, before ^that
- I have the latest version of iTunes
- I've tried to remove all USBs and reconnect iPhone many times, and rebooted both PC and phone
- I had the error 1611 while trying to restore on my PC -> I tried on another computer, worked
- my PC's iTunes recognized my iPhone once after restoring but not anymore
This is really annoying, I would be so thankful if you can help me.

+ I have reinstalled my iTunes.

Yosemite finder crashes with previewig .txt and other files

Hello,
under Yosemite the Finder crashes with previewig .txt and other files.
Is this just my problem? Help please.
Thank you very much.
Regards.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

List of users with authorised reports and tables.

hi all
i have another requirement, that is List of users with authorised reports and tables in SAP.
that means user wise which reports and tables have authorisations to execute. for that what is the tcode or table name?. please help me in this..
Thank you.

Hi,
In SUIM tcode expand transactions node der ull have for users..........
Cheers,
jose.

I changed my User ID it changed on my phone but not on iCloud and it wont let me change my apple ID to my new ID how do I fix this?

I changed my User ID it changed on my phone but not on iCloud and it wont let me change my apple ID to my new ID how do I fix this?

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you delete the existing account you will get an option to keep the iCloud data on your device.
Before deleting the account, save any photo stream photos that you want to keep to your camera roll.

Tthe flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded your info to HCS and now I'm all m

the flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded your info to HCS and now I'm all mixed up as to this gets forward.

Unfortunately, you are not addressing Adobe here in the user forums.
However, there are many highly experienced volunteer users here willing to help.
Can you please clarify: are you saying that your Flood filter (whatever that is) is in your Bridge folder but not in Photoshop?
UPDATE: I Googled your Flood Filter and discovered it's not an Adobe filter at all. Have you contacted its manufacturer, Flaming Pear? What do they say?

There are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

there are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

Do you get an error number? What is the exact message?
Two things to try.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.
If that doesn't work, try an App Store reset and then try again.
App Store Reset Learned from Old Toad
There is a contact link.
App Store Support

HT2476 I got my Macbook Pro from another user (different apple id) and now i'm not able to update iPhoto and iMovie. What can i do?

I got my Macbook Pro from another user (different apple id) and now i'm not able to update iPhoto and iMovie. What can i do?

You need to contact Apple and transfer that computer, the serial number, into your name and your Apple ID. Then you should be able to update the included Apple Apps from the App store. No need to Re-buy them again.
Caveat to the above.
If your Mac did not originally come with Lion Preinstalled, early releases of early 2011 models and older, and originally had Snow Leopard installed the original owner should of supplied the Mac OS X System Discs with the system. If that person didn't you should order them from Apple at a small fee, and don't lose them.

I downloaded movies onto my iPad to watch when I was abroad, I synchronised with my laptop and now they are not on my iPad how can I get them back?

I downloaded movies onto my iPad to watch when I was abroad, I synchronised with my laptop and now they are not on my iPad how can I get them back?

If the shows are in fact still on the pad, they will be found in the videos app, not the music or I tunes app. Look there and see if they are still there.
If you don't see them there, go to the searchlight screen ( farthest left home page) and type in the name of one of the shows. If it is on the pad, hiding somewhere, this will find it.
If they are not there, they should not be using up space.
To get them back onto your pad, plug in and sync again. Make sure you transfer purchases first. Before you sync, take a look at the video tab in your I tunes, and check what you want and don't want synced.

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
thanks!

I wouldn't say pixelated; more like blurry.
Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

How to remote desktop user can read, write ,modify and traverse folder but not execute?

Now I ceate a user accout whis is user type and put him into remote desktop group.
he can login this server by remote desktop.
My server is windows 2003 but not in nt domain and it is a workgroup computer.
I want to limit him access right on one folder in which have many folders and .exe file.
I only want he can read , write,modify file and traverse folder but not execute any .exe file.
How can I implement this through NTFS.
Please give me some advice.

Hi,
I think you could using advanced option to configure the file or folder permission:
http://technet.microsoft.com/en-us/library/bb727008.aspx
Regards.
Vivian Wang

Find users with Role A and Role B but not Role C

Similar Messages

Maybe you are looking for