Find webcam Driver

please brief me, webcam driver, i found it here and there but no founded. please give me my notebook webcam driver by mail or tell me how i can search.
Thanks

mkhalil wrote:
please brief me, webcam driver, i found it here and there but no founded. please give me my notebook webcam driver by mail or tell me how i can search.
Thanks
Hi,
What is your exact machine?
I assume the installed OS is Windows 7 64bit.
Download, save & install this Intel graphic driver directly from Intel. Restart system after installation. Check.
Then, install the Youcam software from your HP Support page.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Satellite P70-A-104 - cannot find webcam driver for Win 8.1

Hello,
I have installed a 2nd hard disk with Win 8 Pro 8.1.
I also have downloaded all available drivers for my model P70-A-104, but there is no driver available for the built-in Toshiba WebCam FHD. I have also checked other Toshiba models with 2 MBit FHD Camera.
Is there anyone who knows where to download the correct driver? I know there a some tools for driver updates (25 - 30 US$) but they don't display the missing web cam driver.
Yours

As far as I know there is no webcam driver for Win and no webcam driver for Win 8.1 because the notebooks webcam module is controlled by internal Microsoft driver provided with Win 8 / Win 8.1
Question: do you have any yellow exclamation marks in device manager? I guess the webcam is listed there...

Where can I find webcam driver for Satellite NB520

like in subject
usb drivers on board but i dont have a icon in screen

Hi
What Windows OS do you use?
The Win 7 drivers are posted and released on the Toshiba European driver page.
But drivers for Win XP are not available for NB520 series at this time
If you want to install the webcam driver/software then I recommend checking the XP drivers released for the earlier NB series like NB300
<img src='http://img835.imageshack.us/img835/5963/capturejit.jpg' border='0' width='600px'/>

Webcam driver software

I've been trying to get my webcam working, and I've downloaded both Mediasmart Webcam and Youcam software (after uninstalling the other) but both cannot find the webcam. Were can I find webcam driver software for my built in webcam, and if these programs are drivers, then what am I doing wrong. I use a HP Pavilion dv5-1235dx Entertainment Notebook PC with windows vista.
Thank you

Welcome to the HP Forum!
Mellaneee wrote:
this computer it was set up for a web cam, I am a computer idiot and just want my web cam to work. I go to HP but there is no media smart nor smart web cam. How do I install this and is this program supposed to be included as package/part of my computer? I am sure there is a simple explanation, I just cannot find it. I need a step by step intruction.
Please identify your notebook with the complete product name or model number.
Have you looked at the box the notebook came in to see if it says it has a webcam? Not all notebooks do come with webcams.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where can i find windows 7 webcam driver for compaq cq61-100sl?

I'm searching for a webcam driver for compaq cq61-100sl but i can't find it, please help me!

Hi:
Normally, all you need is to install the Cyberlink YouCam software.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-78419-1&cc=us&dlc=en&lc=en&...=
Paul

Error message: "Webcam driver open fail" for Satellite L305-S5875

Problem: Webcam is not working and when Camera Assistant Software is started up, the Error message, "Webcam driver open fail" pops up.
Computer: Notebook Satellite L305-S5875
OS: Windows Vista
In troubleshooting, I have unsuccessfully tried the following: Changed the webcam driver several times, rolled back driver, updated driver, and tried Chicony 2.0 USB driver, and a few other webcam drivers. The webcam initially worked fine, but about a month after installing and using Skype video, the webcam suddenly stopped working and on reboot I got the error message.
I've stopped Skype and Camera Assistant Software at startup and manually start them, as someone suggested this as a solution. I've uninstalled both and reinstalled several times. I've tried one software without the other installed... trying every possible arrangement for a solution, to no avail.
I called Customer Support and John, although very nice and patient, was not helpful. He said he'd research and call back. Didn't.
I've gone to Chicony website to try to find an more current driver than January 07. When I let Windows install the latest from the web, it installs a Microsoft 2006 driver. I don't think it's a hardware issue, as it started acting up after Skype installed. I also tried System Restore, but that didn't work either.
Suggestions?
Thanks,
SteveCo

Thanks Jerry. I spent hours going through the links you provided and tried some of the suggestions looking for a solution. Nothing worked.
I tried uninstalling Toshiba's Camera Assist software and Skype (Skype initially seemed to be the instigator of the problem), completely removing both from the registry, and removing the webcam with Device Manager. Then I made sure Vista was up to date, and then installed the latest Toshiba Camera Assist software from the Toshiba download page. After installation and rebooting, I'm getting the same error message: "Webcam driver open fail."
The webcam used to work, before we installed Skype and used it a few times. From the other posts I've read, it does seem to be a common problem... usually after Skype or another webcam-using software is installed and run.
We have another Toshiba laptop: A215-S4757, that has the same OS and webcam-using programs, and it does not have an issue. Apparently though , after going through all the links on the European message board, you provided, the L305 model is having a problem.
Open for suggestions.
SteveCo

Re: Satellite A300 PSAGCA -02Y010 - Error: Webcam driver open failed

Problem:
Recieve error every time I try to use Camera Assistance Software for Toshiba: Webcam driver open failed. Please restart camera or computer. Web cam also does not work in Skype. It seems that this is a very common problem with the A300s series, yet there is no clear solution out there.
Hardware
Series: A300
Model: PSAGCA -02Y010
Software
Operating System: Windows 7 64-bit
Camera Assistant Software for Toshiba: 1.7.175.0123
Details
I recently did a clean install of Windows 7, updating from Windows Vista. I never used the web cam on Windows Vista, so I can't testify as to whether the web camera was workin correctly or not. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam doesn't show up at all in Device Manager - even when set to display hidden devices. Trying to add new hardware through the control panel fails to detect the web camera at all. I have restarted after every install/repair of the driver.
Steps Taken
Reinstalled backuped drivers
I used third party software (Double Driver) to back up and reinstall the drivers for the web camera after I installed Windows 7. Double Driver claimed there was no device to install the driver for. I manually copied the files into the Camera Assistance folder and overwrote the existing ones. The files I copied were:
casflr.cat
oem34.inf
restore.ini
UVCFTR_S.SYS
Reinstalled Drivers from Toshiba Website
Extensive goolging has only turned up recommendations to uninstall and reinstall drivers. I was unable to find any drivers specifically for windows 7 64-bit, but I did try those for my model of laptop for Windows Vista 64-bit - no luck. I tried installing Camera Assistance Software for Toshiba, which as far as I can tell, includes the driver - it only gives me the error described above.
I also tried locating a generic Windows 7 driver for the web camera - I was unable to find one.
Check Registry Value Is Correct
I have also tried checked the registry value at HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID matches the value in C:\Program Files (x86)\Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x86)\Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article recommend.
Please, I would really appreciate it if anyone could help me out here. I have exhausted all the options I can think of.
Likely Solution:
I encountered a thread post that suggested a loose wire was responsible and that the camera would work when the lid was almost closed. I tried this and the camera suddenly appeared in device manager. However, I still can't get it to work with Camera Assistant Software or Skype.
Message was edited by: A300Owner

Hi - I'm a newbie to this forum.
I have an A300 Satellite Pro - not even 2 years old.
In the last 2 days I have 2 problems that I think are possibly related.
1. Like others on here I now cannot get my internal webcam to work. I get the 'webcam driver open failed' message. I have read some forums etc and today I have:
a) loaded most recent BIOS,
b) reloaded the webcam software drivers (the most recent seems to be from 2008!)
c) restarted my laptop about 20 times
Nothing works
2. In the last 2 days for the first time I keep getting the 'USB device not recognised' message that annoyingly crops up about every 10 seconds. I am assuming that the webcam is connected to a USB port (internal) and is no longer being recognised. Based on Google advice in various forums I have also:
1) Turned off the AC power supply
2.) Taken out the laptop battery and waited 5 mins - this apparently resets the BIOS
3) tried using device manager in various ways
Nothing bloody works!!
Maybe the hardware is damaged but I doubt it - I have not dropped the laptop, I always pack it carefully in a padded rucksack. It has always worked fine until 2 days ago.
Ashbo (very fed up)

Please get me the Webcam Driver for my HP Mini PC 110-3100

Hello Sir,
Please get me the Webcam Driver for my HP Mini PC 110-3100
I'M searching for that but am not getting..
So please Help me sir..

Hi,
Please try Webcam Software and driver on the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=42475...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need WIn8.1 webcam driver for Qosmio F50-108

Hello everyone!
I'm looking for Toshiba Qosmio F50-108 camera driver. I have windows 8.1.
Does anyone know where I can find this?

As far as I know Toshiba doesn't offer webcam driver for Win8/Win8.1.
Operating system uses standard Microsoft driver.
I think this Qosmio is pretty old notebook model. But, generally speaking, I don't know if your Qosmio is supported for Win8/Win8.1 or not?

Vivtar Webcam driver problem in Windows 7 Enterprise x64

Hi all, I had not long purchased a Vivitar DVR 708HD Camcorder and the camera itself is rather poor, but I was impressed with it's webcam function back when I had it working on a different computer. I'm not an amature as I'm usually quite good at finding
device drivers as I did a lot of manual driver installations in Windows 98 and 95 but this one as stumped me. The even more annoying thing is, I have lost the OEM disk for the camera (although, I wasn't entitrely sure if it contained a device driver for it)
and I have got it to work once but that was in Windows 7 Ultimate x86. Now my computer is running a 64 bit version of Windows (Windows 7 Enterprise to be precise, as described in the title) and I know some drivers do not like running in 64 bit if they are
not native to them but I was wondering if anybody possibly knows how to sort this. If it is a compatibility issue with 64 bit operating systems then so be it but I was hoping somebody could assist me with this and possibly find a driver solution to work this
camera.
If you need the Hardware Identifications here they are:
USB\VID_04FC&PID_1628&REV_0100&MI_02
USB\VID_04FC&PID_1628&MI_02
I suppose it could also be possible that Vivitar features a different type of Firmware for this cameras I'm not sure but good luck if you can help!
-Matthew

64-bit Windows requires 64-bit drivers.
You will have to contact Vivitar for assistance with your problem. Vivitar has sole responsibility for support of their products.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Satellite A300-1LT - Webcam driver for Windows 7

Hi,
I have a problem with my webcam driver just after installing Windows 7 on my Satellite A300-1LT, I had win XP before and it works fine. In downloads is offered just for xp, vista 32-bit and 64-bit driver (I tried all with same results). Webcam app starts with windows and gives me an error msg that I must reinstall or install new webcam driver. Webcam work in eg. skype buth with (very) poor quality.
I tried to find wich cam is integrated ( chicony? ) also but nothing.
Does enyone else had experienced this issue and know how to resolve it ? please help...

Hi glava11,
As far as I know you can also use the webcam driver for Satellite A500 because its equipped with Chicony webcam too.
So have a look for A500 downloads. There you can find Windows 7 driver for webcam that should work on your model too.
Check this!!!

Satellite A300 - Constant "Webcam Driver Open Fail" Error

I have searched and searched for solutions to this problem and feel like I have tried everything. Whenever I turn my laptop on or attempt to start my webcam I get the error "Webcam driver open fail. Please restart camera or computer."
I used to be able to use the webcam with no problems but it just stopped working one day. I've recently reformatted my operating drive to the out-of-the-box state, but it is still showing an error whenever I try to use my webcam. I'm running Windows Vista Home Premium on an A300 Model: PSA-GCA. I have also tried updating the webcam driver (and the latest BIOS update) from Toshiba's support section, but with no luck. I've also tried using the XP webcam driver, but still, no luck.
Any idea on how to fix this problem?
Message was edited by: Replicant
I also forgot to mention that in my Device Manager, I cannot see my Chicony Webcam at all. There is no section for imaging devices present at all.

Hi
If you search here in the forum you will find enough threads about this issue but I have founded an interesting thread with a good posting from the user Akuma and mayb its useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=136549
If it doesnt work I think you need help from an authorized service provider. The technicians can check your notebook and repair it ifs necessary.
Good luck!

Truevision webcam driver

Hello, I have just bought my notebook HP Pavilion 17-f000sq, but it came with no drivers preinstalled. I have installed all, but one.I am having a hard time finding a driver for my webcam.
I think these are good detailes - I used pcidatabase.com to find this info :
- chip number : SNP2UVC
- chip description : Sonix Webcam
I have installed youcam and mediasuite, but in the device manager still I have an 'unknown device' (I think it is the webcam driver becouse I have searched on pcidatabase using the hardware ids).
I hope you can help me with this, becouse I have came to a ded end.
Best Regards, Alex

alextorn wrote:
Hello, I have just bought my notebook HP Pavilion 17-f000sq, but it came with no drivers preinstalled. I have installed all, but one.I am having a hard time finding a driver for my webcam.
I think these are good detailes - I used pcidatabase.com to find this info :
- chip number : SNP2UVC
- chip description : Sonix Webcam
I have installed youcam and mediasuite, but in the device manager still I have an 'unknown device' (I think it is the webcam driver becouse I have searched on pcidatabase using the hardware ids).
I hope you can help me with this, becouse I have came to a ded end.
Best Regards, Alex
How did conclude that "unknown device" was the webcam? The logic you used doesn't fit that you were able to install the youcam software - if it detected no webcam it wouldn't have installed. You might want to do this setting and try again by selecting the "unknown Device" and search for windows update driver. See my attach screen shot.
Go your task bar and type in the start menu "Change Device installation settings" and you will get to the command below to make youre setting change and see if it can find the right device. This is what I do in Windows 7 not sure how Windows 8.1 look like for you here.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Satellite A200 - WebCam issue - webcam drives has failed

Hi,
I need some help regarding the integrated webcam of my Satellite A200.
Everytime I start the laptop I keep receiving a message saying that the webcam drives has failed and I have to restart the computer, but the problem persists.
I have downloaded an updated webcam driver, but nothing.
Can anyone give me an idea of what is going on?
Thanks!

Ok - I've had the same problem:
"Everytime I start the laptop I keep receiving a message saying that the webcam driver has failed to load and I have to restart the computer"
Same when trying to update driver from Toshiba site, same when rolled back / uninstalled drivers, then re-installed default drivers. Nothing worked.
Sorry - but the solution that worked for me wasn't easy.
I had to disassemble the laptop to take a look - fix something else ( wireless on/off switch had broken / jammed in off position - lugs had snapped on back of the slider switch on the case, but no problems, I just left it in "on" position, as wireless can be switched off in software anyway). I decided as I'd got that far already, to pull the laptop completely apart and clean it out properly.
There's a shielded cable running from the webcam in the lid, though to a small white socket on the motherboard, accessible under the keyboard, next to the wireless board.
I was disconnecting various other cables etc, and came across this one disconnected, and couldn't remember disconnecting it myself. Hmmmm...
Anyway, I connected it back up on reassembly, it pushes in to the socket and seems seated, but needs an extra little push to "snap" securely in place.
My guess is that some of these haven't been seated properly ex-factory. They probably work just fine, until perhaps through repeated flex on the back of the keyboard when typing, or opening and closing the lid, the connector falls out of the socket.
Anyway - my webcam works again now. (using Vista SPII and all current updates, but in my case that's not relevant, as it was NOT a software or driver issue).
There's instructions (with pictures) for disassembling the A200 on the net - use google to find them. You don't need to pull it completely apart, just to the point where you can get the keyboard out, then you can access the connector.

Stereo Webcam Driver

I'm looking for a webcam driver that will recognize two usb webcams at the same time, display them side by side, and perhaps even record from both at once into the same file. The result is intended to be a stereo 3d webcam, but for some reason the software on osx is difficult to find. Any help would be greatly appreciated!
I might have to get it written for me, although I still don't know if it will even work!

Blast, too true!
I know for a fact I can input two webcams at once, I just need a program to display them both at once side by side...

Find webcam Driver

Similar Messages

Maybe you are looking for