Finder cannot access CIFS share but Terminal can

Hello,
when I connect to a Samba share of my university for which the folder permissions are set via NFS ACLs, Finder gives an error: The folder FOLDER cannot be opened because you don't have permission to see its contents.
Access via Terminal to the folder FOLDER works fine though.
The behavior is identical to the following post
https://discussions.apple.com/message/8398410#8398410
But no solution was given.
Any ideas?
Thanks,
To

Hi nvpurk,
Have you accessed to the shared folder in the Linux from the Windows machine before ?
Have you configured the permissions of the shared folder and add the permissions for the specific user ?
Considering you are using the Linux system as a shared host .We can refer to the following link to configure it .
How to Share Folders in Ubuntu & Access them from Windows 7
http://www.7tutorials.com/how-access-ubuntu-shared-folders-windows-7
How to Share Files Between Windows and Linux
http://www.howtogeek.com/176471/how-to-share-files-between-windows-and-linux/
According to the error message ,we can run "icacls path to the network share folder" to check whether the present user has the permission to access the folder .
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Considering you are using the Linux as a shared and we are not familiar with configuring it .We also can try to ask for help from the Linux Forum.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Cannot access CIFS shares from Windows 2008R2 on NSS3000

Hi,
I am trying to upgrade our 2008 domain to 2008R2 but with that last version we cannot access to cifs shares on the NSS3000. Access from all other clients are OK. It was 100% OK under 2008...
Whether I use the IP or the FQDN, I got an error from Windows 2008R2. From IP, I got "No process is on the other end of pipe." and from network Gui, I got "Windows cannot access \\nas0026CB647BC6. Check the spelling of the name...blabla. Details : Error Code : 0x80070035, The network path was not found".
On the NAS, I got this errors in the cifs logs :
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:48 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:48, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
It is likely to be an incompatibility between Windows 2008R2 smbv2 and the NSS3000 smbd but I can't find any firmware update and I can't find the process to allow in the registry.
I can ping it, I can connect on the web interface, I can connect on FTP but no CIFS at all.
Firmware version running is 1.20.1. Hardware rev : V03.
Any idea?

Hi SpaceBass, have you looked into sharepoints or into Netinfo manager. I have been playing around with sharepoints and it does let me enter non local users into the sharing prefs- albeit manually. Only thing is , depending on the number of macs you have, it could be a long and tedious job entering it all by hand. Netinfo may have an easier way, I'll do some more digging and post back.
Cheers.

Cannot access Comcast email but IE can.

Comcast home page cannot load my email even to login. Please fix this! I like Firefox best.
== This happened ==
Every time Firefox opened
== Updated Firefox after Windows 7 came out. I have Vista.

McAfee settings are the same for all my machines, so it can't be that. It is the issue on my machine, but I don't even know if it's Firefox anymore, as I've cleared history and cookies, and then proceeded to uninstall and then reinstall the entire thing with no resolution.

Phone is locked/disabled (cannot remember passcode) but cannot restore becasue itunes says i need to turn off find my phone on icloud but i can't get into my phone to do that, HELP

Phone is locked/disabled (cannot remember passcode) but cannot restore becasue itunes says i need to turn off find my phone on icloud but i can't get into my phone to do that, HELP

Follow the directions here to force the phone into recovery mode & restore it:
http://support.apple.com/kb/HT1808
This will remove the passcode.

Unable to access CIFS shares using SSL Web portal

Hello,
i have deployed Cisco Clientless Web VPN on my ASA5515.
I'm having an issue when I try to browse a file server (access CIFS shares) from the WEB VPN portal. I am prompted for login, and after logging in I get the "Error contacting host" immediately. it's seem like a bug on ASA ? i saw that on Cisco Web site : bug CSCsl94183
I already DONE those things :
1- reload the ASA
2- upgrade to the latest software release
3- test different web browser ( Firefox, IE, Chrome)
1- ASA Platform is 5515 running latest software release (9.1.4)
2- File server running Windows 2008 R2
3- Clients is using Firefox.
4- When I establish SSL VPN connection using Cisco AnyConnect I have no problems accessing files or folders on the same server.
NOTE : I have 2 other CIFS server running Window 2003 and there is no issue. the issue is happening ONLY with the server running Window 2008 R2

I've also seen this exact problem. We have several Windows 2008 R2 servers, one of our Domain controllers has been migrated to 2008 R2. I can access shares on the Windows 2008 R2 domain controller, but not a deicated (member) file share server.

[SOLVED]Setting up Arch to read CIFS shares but no smb.conf

I am trying to ACCESS CIFS shares from another computer. Other clients can access these shares without issue. I am NOT trying to host files from Arch.
Reading I have done: wiki pages on SAMBA and SMBCLIENT.
Reading the SMBCLIENT wiki page, it apparently states that only the package smbclient should be installed, which I did.
But, following the SMBCLIENT wiki, it shows to issue:
#smbclient -L
#smbclient
both error saying smb.conf can not be read. BTW, is the -L to just list the shares available from any place?
Questions:
1. So, should smb.conf be created to use smbclient? This package evidently does not install smb.conf in any form.
2. Does the SAMBA package need to be installed to use smbclient? Samba does install a smb.conf.something.
Any tips you have so I can read CIFS shares will be appreciated.
Thanks
steve.
Last edited by stevepa (2012-11-30 03:22:49)

Reporting my results at resolving my issues
1. installing smbclient provides the described ftp-like environment while accessing CIFS shares. It works fine. I used
$smbclient //OMV/steve -Usteve%omv
to access my share on the OMV server. I could list, get and put files. I still get the message about no smb.conf file but it works.
2. Installing gvfs-smb package allowed Thunar to display the shares. In my case, I do a Ctrl-L and then smb://OMV/steve and I can display the shared content perfectly! Click to remember password or it apparently does not work.
Hope this helps someone.
Steve.

Cannot locate one friend but she can locate me

Cannot locate one friend but she can locate me

Hey Jennyadriana,
Sounds like you may be experiencing an issue with the Find My Friends app. I have an article that will help you troubleshoot this issue with finding your friend in the app:
iCloud: Troubleshooting Find My Friends - Apple Support
http://support.apple.com/en-us/TS4008
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

I have a new computer, and a new iTunes. My old computer crashed and I cannot access the harddrive. How can I switch over my iPod and iPad to my new iTunes?

My laptop crashed and I cannot access the harddrive. How can I transfer everything to my new iTunes to be able to sync my products with having to "erase" and start from scratch on evrything? Any insight will be greatly appreciatted! Thank you!!

Your iPad is married to its now deceased old computer. This is the reason for the necessity of a backup for your computer, which your iPad is not.
Your iTunes Store and App Store purchases will not be lost. Just don't "erase and sync" when you sync your iPad to your new Mac:
If you want to move the iTunes Store purchases on your device to the new computer, choose "Transfer Purchases." The new computer must be set up with your iTunes Store account and authorized to play your iTunes Store purchases in order to transfer your iTunes Store purchases.
Read this for more information:
Using iPhone, iPad, or iPod with multiple computers

My computer with itunes zapped by lightning. cannot access itunes files. how can i transfer my music on my iphone to a new computer. much of it was not purchased from itunes store

my computer with itunes zapped by lightning. cannot access itunes files. how can i transfer my music on my iphone to a new computer. much of it was not purchased from itunes store

Did you fail to maintain a backup copy?
If so, then you can buy a third party program to extract the music not purchased from itunes.
Itunes purchases can be transferred to your computer: File>Transfer Purchases.

TS1702 Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't d

Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't download

Use the Mac App Store application and go to the purchased tab, which you'll find at the top of the Mac App Store window.

I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers.

I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers. Anyone have any ideas? Thanks.

From a Catherine to Katherine -- Had the exact same problem!! I had to enable Java twice - both in Safari and then on the MacBookAir itself.

I cannot sign into yahoo, but I can get to other sites by using tabs on toolbar, but then I cannot sign out?

'''bold text'''I cannot sifn into yahoo, but I can get to other sites by using tabs on toolbar, but then I cannot sign out. I have uninstalled Firefox and reinstalled it but I still have the same problem.

That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
You can keep an eye on this thread:
*[[/forums/contributors/707748]]

TS3274 how come all of a sudden, I cannot send/receive messages, but I can receive e-mails in my Ipad?

HOW COME I CANNOT /SEND RECEIVE MESSAGES, BUT I CAN RECEIVE EMAIL?

Sending and receiving messages has absolutely no relation at all to sending and receiving email.
Your iPad is not a cellular telephone. It cannot send or receive SMS text messages. It can only send or receive iMessages, which are messages to/from other Apple devices (only) on a WiFi or a cellular network that supports iMessage.

TS3694 My ipod gives code 3194 when trying to update and restore on my home computer. My daughter's ipod doesn't have a problem. We are doing family share, but I can't even apply free game aps because it says I need ios 4.1. It hasn't worked. What to

My ipod gives code 3194 when trying to update and restore on my home computer. My daughter's ipod doesn't have a problem. We are doing family share, but I can't even apply free game aps because it says I need ios 4.1 and when I try to do that it hasn't worked. What do I do?

3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

Server 2012 Local Shares - Cannot access using \\IP but works via \\localhost

I've been stuck on this problem for the last couple of days and I can't find a solution on the internet that works.
I have a Windows Server 2012 instance running on Amazon AWS with a public IP address. I am using it as an SCCM (System Center 2012 Configuration Manager) Server (so it is a Domain Controller also). I realize that it's probably not best practice to use a public
IP here, but I'm in a weird position where we are not connecting any of the Clients to the actual Domain (they are Workgroup computers all around the world). The goal here is to use SCCM to deploy software packages to all of the Clients, which are not on the
same LAN/VPN/Domain.
This is my first time setting something up like this, so I followed this guide. I am able to get the Workgroup computers to show up in the SCCM Server Device list (via manual client install), but these Workgroup computers need access to the Server's shares
to download the software packages. On Amazon, I opened all ports and allowed all IPs to communicate with the Server. I am able to RDP into the Server from any Workgroup computer using the IP address, but cannot access the Server's SMB shares even though I
am attempting the connection with a Domain account with access to those shares.
I decided to see if I can even connect to the shares locally on the Server. Logging in with an account with administrator privileges, I can access \\localhost\shares without
a problem. But when I try to do \\X.X.X.X\shares,
it asks for user/pass (confirming that it is able to connect) and I put in the correct credentials for the account with administrator privileges (using DOMAIN\ACCOUNT), but it continually says that the user/pass is incorrect. After I click cancel, an error
comes up saying "Error Code 0x80004005 Unspecified Error".
It is crazy to me that the administrator account that is logged in cannot access the local shares via the public IP address... obviously no remote computer would be able to access the shares if the Server itself cannot. I have tried disabling the firewall,
but this makes no difference. I am able to ping the IP from the Server and I get a response.
I have searched around the internet for a solution but nothing has worked. Here are some of the suggestions I've found (that have failed):
- Making sure "Client for Microsoft Networks" and "File and Printer Sharing for Microsoft Networks is installed and enabled for the Ethernet Adapter
- Enabling NetBIOS over TCP/IP in IPv4 properties
- Ensuring IPv6 is disabled
- Server, TCP/IP NetBIOS Helper, and Workstation (services) are all running
Any ideas? Sorry for such a long post, just wanted to get as many details as I could. All help is appreciated. Thanks!
Shawn

Hi,
Are there any anti-virus software or other third party products running on the server? If yes, please disable them to see if it resolves the issue.
Here is a similar thread below I suggest you refer to:
Shared Folder Access
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c0bbbe8e-55d8-467c-bb85-2b98f122cc15/shared-folder-access?forum=winserverPN
Best Regards,
Amy

Finder cannot access CIFS share but Terminal can

Similar Messages

Maybe you are looking for